Installed the Audio but not Audio drivers Realtek Sound Manager or Dell!

Similar Questions

• Satellite A200 PSAE6E: Impossible to install the audio drivers after installing Win XP realtek

  Hello...

  Recently, I repartitioned my laptop HD to install XP and kubuntu (it came with vista)... However, I was not able to install audio drivers for its audio devices...

  The laptop is a toshiba Satellite A200-PSAE6E and everest indicates the following audio controllers:

  ATI hd 2xxx hdmi @ ati radeon hd 2600 - controller high definition audio
  Realtek alc268 @ intel 82801hbm ich8m - audio controller high definition

  First I tried to download the audio drivers high definition realtek web site (32-bit version of windows xp). I tried to run the installation, manually navigating to WDM file during the installation of the pilot and navigation manually the folders where the drivers have been copied during the installation under c:\windows\system32\... all to nothing done...

  Then I tried to download drivers toshiba official of the support web site of europe from toshiba for the realtek chip... I've lived the same behavior (both when you run the Setup program and install manually force pilots)

  Then I tried to download the drivers for ATI HDMI audio device from realtek website... with the same results...

  Windows tells me that it was impossible to find a driver in the any of the archives...

  The only thing that could be the culprit because as far as I can tell, is that I installed service pack 3 RC2...

  Any help would be greatly appreciated,
  Tasos

  P.S. I've tried the two automatic installation through specification of a folder and choose the options "I will manually choose a driver from the list" in the hardware installation wizard... the result is always the same... Note that the audio works perfectly under ubuntu...

  P.S.2 IMPORTANT! I recently discovered that toshiba offers bios versions for the A200 PSAE6E depending on if it is equipped with windows xp or vista...

  This refers to which the operating system has been installed when the system was purchased, or the operating system that is currently used? Can I upgrade the Bios of my laptop with the XP version or this break from things?

  Hello

  Regarding the sound issue.
  A lot of people already asked for it here on the forum and my knowledge the driver sound doesn't work because that some Member States the fixes and patches are missing.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  You will need to install KB888111 and KB835221 hotfix

  With regard to the BIOS;
  Yes, some series of laptops needs a version of XP BIOS if you want to install and use the XP on the laptop. AFAIK the A200 is one of these series of laptops.

  Good bye

• Satellite 2400-S251: impossible to install the audio drivers XP

  I have a Satellite 2400-S251 and I just upgraded to Windows XP and now I have no sound.
  I looked in my device manager and I have drivers but I see 4 different audio codecs.

  I downloaded the audio drivers from the Web of Toshiba (s240sndx.exe) site is accurate. and it starts the installation but just at the point where you think that its almost done just it stops and says "driver not installed".

  Does anyone have a solution for me?
  Is it possible to manually place the INFs of the (s240sndx.exe) that I extracted from my C drive somewhere. If Yes, then where?
  Any help will be greatly appreciated.

  Hello

  What page of the driver Toshiba did you use? Have you downloaded the driver from the EU page or US?
  Satellite 2400-S251 deigned for the American market.
  Maybe the audio driver from the Toshiba website we will help you recover the sound

  See this page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  and you choose the unit.

  After installing the audio driver, you should also check all audio controls in the-> sound and audio devices Control Panel
  They should be set at a higher level

• Try to install the OS but not big enough partition?

  Hello

  I'm a little lost... After you have reinstalled XP, I had a few problems.
  First of all, the program that I now have on my computer is supposed to have not passed the real thing on opening... I lost the disc, so I bought another XP (SP2) drive on eBay and I tried to install... It then says that as I have already a newer version (SP3) and therefore does not install.
  I thought I would just try to install windows 7 instead and forget XP but now I said, by the system, the partition is not big enough!
  My C drive seems to just have a BIG something or other and is great just 13 MB... the partition of F is NFTC and has more space it seems... can someone please tell me how I can expand the C partition, so I can install?
  Or do I just delete/clean everything and start over with an installation of windows 7?
  I'm really lost here and any help is welcome.
  Thank you.

  Before you start to wipe the drive clean, check first with the computer is capable of running Windows 7

  Run Upgrade Advisor for Windows 7

• HP Envy Phoenix 850-150QE: reinstall the Audio from Realtek HP Manager

  My new PC equipped with a Blu Ray player: BD RE BU2ON HP.  It will burn 50G blu ray discs? I need to know before I blow the money for a full line of them.

  Hello

  All I can say is that I would be really surprised if could take no burn to a double layer bd - but I can't find any documentation that explicitly states this fact.

  Kind regards

  DP - K

• Impossible to install the audio driver Windows XP Home for my Satellite A110

  Hello!

  I formatted my hard drive and now I have reinstalled Windows XP on my TOSHIBA SATELLITE A110-160.
  I don't have the recovery CD, but I have downloaded all the drivers from toshiba.com.
  The thing is, when I try to install the audio driver Realtek HD, I get a message that I have loaded on my system bus driver so
  to install the Realtek HD audio driver!

  So I don't know what to do, and I can't play the audio in my laptop!

  Please, help me!

  Before you start to install a driver available, please download and review the Instructions for installations.
  You'll find order exact facilities. Please follow this wnd control facilities that everything will be OK.
  Have you installed the chipset utility first?

• Installing the audio driver in Satellite A100-773

  I just installed Windows XP SP2 on my Satellite. I did a backup driver CD with my recovery CD. Now, here's my problem:

  I followed the Installation Instructions and each device works fine, except my audio driver, I also have an unknown PCI device. I expect that the PCI device is the problem for my work not driver Sound. Maybe someone knows an answer to this problem.

  I guess that the audio driver has not been installed correctly and so the sound doesn't work on the laptop. I think the unknown PCI device is the sound card.

  I put t know how you installed the audio driver, but I recommend you download the latest version of the Toshiba page, then install the audio driver in Device Manager.

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• Cut the scene - but not audio

  Hello

  I am changing a video with an audio device. I did successfully a few images in the middle of the clip, but it seems that, in doing so, no, I have also cut the sound. Is there a way just cut to images without affecting the audio component?

  Thanks in advance.

  Jerry

  Are you talking about that part of the audio or audio clip, a separate clip?

  If you select a clip on your timeline, split will only cut through this clip.

  If you want to cut the video but not the audio clip, right-click on the item and select the option to remove the link Audio and video. Then select the video portion and divide only.

• Satellite Pro U200 - installing the audio driver on Win XP

  I have a Satellite Pro U200 and there is no sound - sound fine when attached to the DynaDock, but not when its autonomous.

  Device Manager there down as an existing audio device - I downloaded the driver audio from Toshiba Web site but when I try and install it says "the HD Audio bus driver is required and not found" I did a little research and found in necessary MS hotfix KB888111 which I installed it, but the audio driver will not even install - ideas?

  Windows XP must install patch KB888111 and KB835221 MS site before installing the audio driver.

  -so finally you need to install the two patches
  -Download Realtek audio driver from the Realtek page
  -remove the old driver its the laptop restart of Device Manager and install the new audio driver download

  Greetings

• Impossible to install the audio driver for Vista for Satellite M100-152

  Hi people,

  I have a problem with installing the audio driver for my M100 - 152 (PSMA1E). I downloaded the driver and tried to install it. At one point during the installation progress, sometimes an error message that says: "Setup does not match infFile Realtek HD Audio.
  Sound works when headphones are connected but no sound to the speakers.

  Someone at - it an idea?

  Best regards
  Hannes

  Post edited by: hannesgpunkt

  Post edited by: hannesgpunkt

  Hello

  where did you downloaded the driver? On the toshiba Web site? Maybe you should try the driver from realtek home page because they are native and absolutely clear things from other manufacturers. I think you should try "www.realtek.com" and install the driver downloaded from there, once you have uninstalled the driver for your machine.

  Welcome them

• Satellite A300D-15B PSAKCE - cannot install the audio driver for Win XP 64 bit

  Hi all

  This is my first post here after hidden during the last week or so, my hope is that somewhere it helps and hope so!

  I have a wonderful Toshiba A300D-15B PSAKCE with RAM 4 GB/O, but I suffer from some problems RESEARCH Holy function cannot resolve. I use this laptop as a box of development for uni/work unfortunately...

  After a complete nightmare and Vista32, Vista64, I decided to go back to windows XP32, however this custom install, continues to claim a failure of a CRC file after (and Yes, that's with SATA in IDE mode and a disc of XPSP2)

  I decided that I really DON'T want to goback to Vista, so installed Windows XP64. Now the first installation is very easy, I have the basic configuration, the chipset, graphic, network, CPU, usb, fine... except basic... and that's where I lost most of my hair... SOUND!

  First try to install the results of the pilot of his failure, claiming the mmdriver.inf cannot be found or corrupted, obviously I checked, and yes there it is, downloaded pleasure the MMDRIVER. INF and placed it system32 and the installation always fails.

  I also tried a "manual installation", in .inf files... which includes pilots XP32/64 and Vista 32/64 bit drivers, still the same
  problem, the driver continues to not install. I am going bald. Exceptional drivers who moved there

  * - Audio device on High Audio Defninition Bus *.
  * - Mass Storage Controller *.
  * - Modem Device on High Audio Defninition Bus *.
  * - USB device *.

  If what follows is any help, (Sandra 2008)

  * - Disk controller *.
  (AMD (ATI) SB700 SATA Controller [IDE Mode])

  * - Disk controller *.
  (Toshiba SB700 IDE)

  * - Audio device *.
  (Toshiba IXP High Definition Audio Controller)

  * - Audio Codec *.
  (Conexant Systems 5051 hours)

  * - Audio device *.
  (AMD (ATI) [Radeon HD 3600 Series] RV635 Audio device

  Now, as I write this, I heard the rumor that the A305D uses the same
  audio/graphics drivers... Well well... off to try something I guess...

  If there is no help or ideas, I'd appreciate it.

  Hello

  The laptop seems to use the Conexant audio chip. So, you will need the right sound driver for Win XP 64 bit.
  Unfortunately, the European driver Toshiba page provides the drivers for Win XP but I don't know if the pilots would cover the OS 64 bit as well m.

  Anyway, what you need to know, is that you will need to first install the patches Ms.
  The fix KB835221 and KB888111MS must be installed before installing the audio driver.
  If you have tried to install the driver, then remove it from the Device Manager and update Windows XP first!

  AFAIK that SP3 already contains these patches then perhaps you should install SP3 first before starting with the installation of the audio driver.

• Satellite L655-1FO - how to install the audio driver?

  How to install the audio driver on my l655 1fo? I download the driver of toshiba, but it cannot start. Can someone help me how to install it on Windows XP. Thank you

  Hey,.

  Before starting with the installation of the driver it is important that you install Service Pack 3 for Windows XP, because it contains important updates for cards high definition sound. Otherwise, you are not able to install audio driver.

  Download & install SP3 and then you can start with the driver installation :)

• Impossible to install the audio driver and the sound.

  Original title: there is a problem with the sound I don't have it at all, he said that there is a problem with the driver for NVIDIA high definition audio and put it back in place could help, but my computer will not reinstall.

  There is a problem with the sound I don't have it at all, he said that there is a problem with the driver for NVIDIA high definition audio and put it back in place could help, but my computer will not reinstall.

  Hello

  1. What is the brand and model of the computer?

  2. you make changes that caused the problem?

  3. what operating system do you have in the computer?

  I suggest you check out the links below to fix sound problems in the computer. The suggestions apply for Windows 7 and Vista.

  Method 1: Follow the instructions in the links below:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 2: update the audio drivers for the sound volume number:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  It will be useful.

• Intel E210882 problem to install the audio driver

  Hello covered,

  my mother (Intel E 210882) Board of Directors can u give me a ling so I am audio driver download Intel E 210882

  I'm install audio driver Intel E 210882 I get error msz (driver not found, restart your system and run this installer to new soundmax)

  Thanks for giving me guide how to download and install the audio driver Intel E 210882... ???

  Pls find attached error jpg

  

  Respect,

  Jean Claude

  Install the update utility: -.

  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

  Or download the manual, get the sound mark, Realtek etc then go to the makers website and download the driver.