Installed the driver but no sound on my unit
I had problems with the original driver, xp don't like it a bit and asked it be uninstalled. So, I downloaded the latest driver on the Toshiba site. This installed without any error, but not sound. Everything looks ok in Device Manager.
Anyone?
Hi Matt,
Sorry if you have already checked this but make sure MUTE is not checked in the sound settings and also check that the volume levels are not set to 0.
Kind regards
Tags: Toshiba
Similar Questions
-
I'm trying to install the drive but I get a message saying that I already have a newer version installed. How to uninstall this version?
Hi Vidar,
Please run the cleanup tool Download Adobe Reader and Acrobat tool - Adobe Labs, restart your computer and then try to install Adobe Reader using this link Adobe Acrobat Reader DC install for all versions
It could be useful!
Rayyan
-
In Windows Vista Ultimate, I have an Asustek Mercury capture device. After install Vista see the card and install the driver. When I try to configer the card in Windows Media center, and then I get that there is no tuner devices!
How can I solved this?
Concerning
Joop
Hi Joop,
· The TV tuner appears in the devices under sound, video controllers Manager?
· Your TV tuner card is updated?
Follow the suggestions below for a possible solution:
Method 1: Look for errors in Device Manager
a. open the Device Manager by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Device Manager.
b. in Device Manager, look for the device, then double click on the name of the device.
c. the general tab look for the status of the device for any error code indicated.
Check out the link:
Get help with Device Manager errors
http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors
Method 2: You can also visit the following links and check if it helps.
Error message when you run the installation process of Run first of Windows Media Center in Windows Vista: "Tuner not found".
http://support.Microsoft.com/kb/934531
Error message that you receive after you configure Windows Media Center without connecting to the Internet: "No Tuner available".
http://support.Microsoft.com/kb/929453
Let us know if that helps.
-
Windows 7 no Photofix Copier of Summit, do not to install the driver properly error. Any help for this old surfer of money with the early stages of dementia would be much appreciated.
Thanks to all who can help.
Concerning
TREVI think you will find that your Copier, Photfix, is not compatible with win7, according to many other messages from various sites.
You could try the free trial of http://www.hamrick.com/ but be aware that if it works, and you decide to buy its probably at a cost similar to you buy a compatible scanner.
BTW, the title line of your post is not really applicable to your question/problem.
-
Installed the driver for Lifechat lx300, but can not hear the audio in media player
I have a new helmet. I installed the driver but can not hear the audio in media player
Hello
I suggest you to visit the links below that would solve your problem.
Step 1: Turn sounds into the lifestyle cat helmet
http://support.Microsoft.com/kb/935749
Additional information: a. tips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
b. no sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Hope this information is helpful and let me know if you need additional assistance.
-
I can't install the driver of Unknow devices.
Hello!
My laptop computer intsalled Windows 7, I have install the driver, but he is a pilot, I can not install, which is Unknow driver. I find the complete driver on the hp homepage, but I can't find the driver of Unknow devices. My laptop is HP Pavilion dv4-1102tu.
Please help me find the driver Unknow.
Thank you very much!
My devices is Unknow:
ACPI\HPQ0004
HPQ0004
Find me this driver.
Thank you very much
-
I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.
Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?
-
original text: P17.sys
I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...
Hello
- What is the exact error message you get?
- Are you not sound on the computer or Rocketfish?
If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsOtherwise, I suggest you to give us more information about the issue, so that we can help you better.
It will be useful.
-
Installing the driver on the Qosmio G20
I have a G20 machine (bought from the Japan) and I want to install my copy of XP pro.
XP Setup works well until the end, then I start to install the driver and the software as suggested by Toshiba:
acoustic silencer V1.00.005A
help V1.02.00_TINASSIST_NUER20MA
--> NOT INSTALLED atheros wlan 802.11ag / utility V3.1.2.19I123 g
--> Bluetooth has NOT BEEN followed V2.0 (B20041111)
Toshiba bluetooth stack V3.3.10.01 BUILD20041209
Texas instruments pcixx21 flashmedia driver V1.0.2.1 INSTALLER BUGFIX
Utility Intel chipset software installation V6.1.0.1008
common modules V6.02.04
ConfigFree V5.00.48
controls V3.16.2400
display the change of aircraft V1.6.0.0 utility
NVIDIA geforce go 6600 display V6.14.10.7118 driver
Hotkey to display V2.8.0.0 - 00 - XP
fix for "cumulative security update for ie ' Q834707
fix for "question in hyperterminal could allow code execution" KB873339
fix for 'problem in the kernel windows and lsass' KB885835
fix for "issue in wordpad could allow code execution" KB885836
fix for 'windows firewall only my network (or subnet)' KB886185
--> NOT INSTALLED hardware (dep) - active computer may quit unexpectedly after recovery from sleep mode or hibernation in windows xp service pack 2 Q889673
SM214710AD2 Toshiba software modem
V8.0.1.1 card WIRELESS Intel(r) pro/100 ve
PC V3.1.0 diagnostic tool
development of picture V2.7.0.2 utility
V7.05.04 energy saving
Toshiba V1.00.0013 for NUR20 raid driver
utility RAID V1.2.0.25
SD V2.0.2.1A memory card format
secure module SD V1.0.2
SoundMax integrated digital audio V5.12.01.5240U
--> NOT INSTALLED sun java 2 runtime environment V1.5.0
Touch and the launch of V1.2.7.0
V6.0.304.6 Alps pointing device driver
Press the start/stop utility V2.05.00
utilities V4.20.26
Virtual sound v1.00.05UPDATE
V2.0.0.5 wireless keyboard shortcut
wireless network card mini pci Atheros ar5001x V3.1.2.45
Intel wireless b/g V9.0.1.9 lan driver
utility V2.0.0.20C zoomIn addition to the above, I have install the driver of TV tuner driver DVD RAM, the utility Maximizer and does not have the cause of the Atheros 802.11 driver, it seems, the machine has a network card Intel (is true?)
But when I arrived at the end of this procedure the system starts and works fine the first time, but when I restart the machine that the hourglass will for centuries and I need to restart in safe mode using the Manager tasks.
I have a feeling that the problem is related to the utility Configfree or be WIFI.
I tried to uninstall the Configfree but the problem is still there!
There, can someone help me? !!
Hello
You are right. If the device has an Intel WLan card you n t need to install Atheros utility and Atheros WLan driver. But you need the Intel WLan driver.
I don t think that the problem is the utility Configfree. In my opinion you should check into the full background due to CPU performance process using Task Manager.Good bye
-
Problems installing the driver for the ToolsCD - Satellite P100-277
Hello
I got a Satellite P100-277, I have formatted and reinstalled windows xp on due to virus issues.
Before I did it, I copied the folder "toolscd" of the HD intern on my external HD.
Now, I reinstalled all the drivers, but with some drivers, there is no setup.exe and I do not understand how I can install these drivers then.For example, my audio driver, the 'Driver Sound' folder contains DLL, SYS, XML, CAT and INI files.
But I don't know how I can install the driver.I hope you guys can help me out here, thx!
> Now, I reinstalled all the drivers, but with some drivers, there is no setup.exe and I do not understand how I can install these drivers then.
Some drivers must be installed in the Device Manager.
Mark the device, push the button update driver and point to the files that are stored on your HARD driveGood bye
-
When I connected the printer to the system recognizes it as a cd player.
I tried to install the driver (from the HP site), but it stopped at about 83% with General error msg.
UAC is disabled and .net framework advanced fetures is not installed.
I see an error in the event viewer, without and the error number:
Message: The object of the communication, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state.
Source: mscorlibHey @yechiel-adar,.
Welcome to the Forums of HP Support!
I understand that your color HP LaserJet Pro 100 M175a multifunction fails to install on your computer Windows 8.1 as the computer recognizes your printer as a CD drive and the installation fails at 83%. I would like to help you to solve this problem today. To be honest, it sounds like there is a conflict between your computer and the HP Smart Install feature. Smart Install is a feature that has been programmed into the new models of Laserjet. It allows you to simply plug a USB cable and the installation files will load on your computer for you for faster and easier installation. However, on some computers systems rather find recognizing printers printers rather than software CDs. In this case, the installation never ends with success that your computer never actually detects the Laserjet Printer. That being said, I'll guide you through a few steps below to resolve this issue.
Please, disconnect the USB cable from your computer before you continue.
Step 1: Disable Smart Install:
- On the front panel of your printer, select the button Setup (key)
- Right arrow to the Service menu , and then select OK
- Right arrow key for Smart Install and select OK
- Please turn OFF Smart Install
Once Smart Install turned offshore, please proceed to the next step.
Step 2: Uninstall the drivers:
For the purposes of troubleshooting, it is crucial that we have a clean slate to work with. Even if your ever successful installation there is a chance that a part of the software package and the pilot has made its way on your computer. To ensure that there are no problems when reinstall us your printer, I'll first you remove all traces of your printer from your computer.
- Open your screen to Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
- On the start screen, type programs and features. Click on programs and features to run
- In the window programs and features will populate a list of the programs installed on your computer. Please scroll down and look for your HP Laserjet. If you see the Laserjet listed please select it and choose Uninstall
- Follow the instructions on the screen to complete the uninstallation. Once the uninstall is complete, please close programs and features and continue to the next step.
Step 3: Delete the temporary files:
- Open your screen to Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key
- On the start screen please type run. Click on Run to launch the run dialogue box.
- In the run box, type %temp% , and then click OK
- When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
- Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
- Close the Temp folder when it is empty
- R ight, click on the recycling bin on your desktop and select empty recycling bin
Step 4: Install the device:
- Please click here to download and run the installer full feature software and driver for your printer
- Once the download is complete, follow the prompts on the screen to install your HP Laserjet Printer
- Do not connect the USB cable until the installation window invites you to
Once the installation is completed successfully, please test print to confirm that your product works as normal.
Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!
-
Has stopped working when I tried to update DFX audio enhancer that have not installed the driver and lost all the audio outputs. Uninstalled DFX and used problem checker who restored the audio, but not the HDMI taken even if I get the image on the TV but no sound.
You don't say what version of Windows you use, but try to make sure that you have selected as default playback device here HDMI:
Start--> Contol Panel-> Sound-> playback tab
If you have Windows Vista or Windows 7.
If you post back please tell us your version of Windows.
-
Install the driver audio error.
Recently, I uninstalled the audio driver conexant accidentally in my laptop Dell inspiron 5520. I tried to install the driver from the Dell website, but who displays an error. There is no restore point created and I couldn't install Windows 8.1 store or DVD. An error occurs when when refreshing and DVD restoration. Is it possible to fix this?
Hello
According to the description of the problem you encounter a problem with the sound on your computer that you have accidentally uninstalled the audio drivers. You may experience this problem if the audio device as the default for internal speaker is not set correctly or the drivers are not compatible with Windows 8. I suggest you follow these methods and see if it helps:
Method 1:
Check if the default audio device is properly defined. Follow these steps:
- Windows key + X, click Control Panel, click hardware and soundand then click sound.
- Read tab. Make sure that the correct default audio device is selected. (For most users, the default audio device is pregnant.)
- Read tab, select the appropriate device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, click OK.
- Read tab, select the playback device, click set upand make sure that the configurations are set correctly.
If the sound settings are set correctly and that your speakers are already set as default device, go to "Check if an audio driver is installed" now.
- The default value.
- OK to save your settings.
Method 2: If fails it above step, proceed from the link:
No sound in Windows
If you can not upgrade to Windows 8.1, I suggest trying the steps by Vivian Samartha responded on April 12, 2014 in the following thread and see if it works for you.
If the problem persists after trying the above steps, I'll ask to follow the steps given by David Williams Dixon in the Blog below.
Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
-
Installing the driver LAN WXP on Tecra A7
Hello
I do not have a source more to install WINDOS XP on my Tecra A7 (PTA71E). I reinstalled Windows XP but I'm stuck at the level of the LAN driver, I downloaded the driver on the toshiba site, but in files, only one file "PROUnstl.exe" is a possible, and is a desinsatllation file. How to install the driver from downloaded files
Thank youList of files
e1000msg.dll
EtCo32.dll
NicCo32.dll
NicIn32.dll
PROUnstl.exe
TVERSION. XML
e1e5032. DIN
E1e5032.sys
e1e5132.cat
e1e5132. DIN
e1e5132.inf
E1e5132.sys
iAMT.cat
IAMT.din
IAMT.inf
IAMT2K.sys
IAMT03.sys
IAMTXP.sys
iresol.cat
iresol.inf
verfile. ICTIf you get this message, it means that the LAN driver is already installed.
What is the status of the network (Ethernet controller) card in Device Manager?
You should be able to find the network adapter in the network adapters box. -
L750D-14R satellite - cannot install the driver for the TouchPad Win7
Hello
I have a problem with drivers for the touchpad. I downloaded v 15.2.11.1 Synaptics and me couldn't install them.
"Installation of Synaptics (sync TP) ranked" I've got Windows 7 x 64. I've looked everywhere but I can't find any information on this problem.If someone knows what can go wrong and how can I fix this problem I would appriciate it.
Never had any problems with installing the touchpad driver.
I guess its not the touchpad driver problem but the problem with your system.First, you must uninstall the old driver for the touchpad.
This can be done in the control panel-> programs & featuresClean the system using some freeware like for instance CCLeaner tools.
Restart the laptop between procedures.Then download driver Synaptics driver Toshiba UE page.
Alternatively, you can try to install the driver for the Synaptics driver page: http://www.synaptics.com/resources/drivers
In my case it worked and this driver has added some additional options that I would change in the Synaptics touchpad settings
Maybe you are looking for
-
Import a video from iTunes for Photos
All my videos are in one place: Photos App. (Synchronization via iCloud photo library to all my Apple devices) Now, I found a video placed in my iTunes Music folder. Is it possible to move this video to Photos? Or it is recommended to leave it as it
-
Everything seems to work bar ringtones. When I call someone or they call me, there is no sound. I was in 'tools' and back to default but no difference.
-
take the cos(pi/2) shows the wrong result in swift
take the cos(pi/2) shows the wrong result in swift but when I take the sin(pi/2) it shows the correct result. I'm messing around with math to swift before that I use it in my application but I'm having a problem to calculate the correct results with
-
My laptop has emerged on the programs on my laptop
I need to know how to get back all my lost programs.
-
I recently installed a maximum of 4 GB of RAM for my Win XP Home computer: four tips of 1024Mo in 4 available memory locations. Story: It came with 512 MB of RAM (256 MB two cards to 2 of the 4 slots). I sometimes treat files large image or video in