installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

Similar Questions

• CD/DVD drive is not detected (Windows Vista). Error message: Please insert a disk (removable disk): __Our device driver is: TSSTcorp CD/DVGW TS-H653L ATA Device.

  Was not aware there is a problem until I tried some recently audio and data CDs.  Have you tried different Web sites to help you, however some of the directions come with a warning that by following certain procedures I can create other problems.  The FixIt tool was not able to install the player.

  Hello

  Please ALL these even if you've done it before as it's often the total process that
  solves the problem. You should also check with the system manufacturer as some readers do not use windows
  by default the drivers and need their own, use the bottom and if no joy check on the site of the manufacturer of the system.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7 supports my old pc game. Gears Of War?

  Windows 7 supports my old pc game. "Gears Of War"?
  Well, I heard that if I've upgraded to Windows 7 Professional edition, I would be fine using "Gears Of War".
  Is it true or not?

  Click on the following link for the game compatibility in the Windows 7 operating system.

  http://www.Microsoft.com/Windows/compatibility/en-us/default.aspx

• Cannot install the driver for Radeon R5 230 graphics card in laptop Lenovo G50-40 with AMD APU A8

  Hello everyone.

  My name is Manu.

  Recently, I bought a laptop computer lenovo G50-40. The specifications are the following:

  8 GB RAM

  1 TB HARD DRIVE

  AMD Quad Core APU A8

  Card Radeon R5 M230 chart with graphic 2 GB memory card

  I installed Windows 8 Enterprise 64 - Bit Edition. The problem that I am facing is that I'm not able to install the drivers for the graphics M230 R5. I've updated the BIOS, tried to download the latest drivers from the Web of AMD site too. Yet, the system is simply not recognize hardware. The screenshot below should give you the image:

  

  It appears as a video controller. But I can't install the driver even after you use the update driver option. Please help me.

  Concerning

  Mahesh

  Well, what I did downgrade from windows 7.1 and the drivers worked well. I was a bit hesitant on windows 8.1 and there is no upgrade to Windows 8 Enterprise anyway. The games are now place beautifully. Thank you guys.

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• Open with options: I want to add a new application to the list right click on file-> open with and rearrange the list so my search app is first. I know that I can use open with-> other and select any application, but it takes too much time since I u

  I want to add a new application to the list right click on file-> open with

  and also reorder the list so my search app is first / top of the list.

  I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.

  Basically, I'm looking for a configurable way configure open with, something more to send to Windows.

  Thank you very much for all the advice offered.

  The operating system, not you, not control that open with the menu command.

• Installing the driver LAN WXP on Tecra A7

  Hello

  I do not have a source more to install WINDOS XP on my Tecra A7 (PTA71E). I reinstalled Windows XP but I'm stuck at the level of the LAN driver, I downloaded the driver on the toshiba site, but in files, only one file "PROUnstl.exe" is a possible, and is a desinsatllation file. How to install the driver from downloaded files
  Thank you

  List of files
  e1000msg.dll
  EtCo32.dll
  NicCo32.dll
  NicIn32.dll
  PROUnstl.exe
  TVERSION. XML
  e1e5032. DIN
  E1e5032.sys
  e1e5132.cat
  e1e5132. DIN
  e1e5132.inf
  E1e5132.sys
  iAMT.cat
  IAMT.din
  IAMT.inf
  IAMT2K.sys
  IAMT03.sys
  IAMTXP.sys
  iresol.cat
  iresol.inf
  verfile. ICT

  If you get this message, it means that the LAN driver is already installed.
  What is the status of the network (Ethernet controller) card in Device Manager?
  You should be able to find the network adapter in the network adapters box.

• Pavilion dv3: cannot install the driver for graphics (Clubhouse dv3)

  Hello! I can't find and install the driver for graphics card. I see on the device manager that without "ATI radeon 5400 series.

  someone help me! Thank you

  Hi @QuanTrinh

  Welcome to the Forums of HP Support! I want you to meet some problems to find a graphics driver. I'll be happy to help you with that. Let me start by getting your product number , there are a number of dv3 models in this series. I also need to confirm that you are using Windows 7 32 - bit as well.

• L750D-14R satellite - cannot install the driver for the TouchPad Win7

  Hello

  I have a problem with drivers for the touchpad. I downloaded v 15.2.11.1 Synaptics and me couldn't install them.
  "Installation of Synaptics (sync TP) ranked" I've got Windows 7 x 64. I've looked everywhere but I can't find any information on this problem.

  If someone knows what can go wrong and how can I fix this problem I would appriciate it.

  Never had any problems with installing the touchpad driver.
  I guess its not the touchpad driver problem but the problem with your system.

  First, you must uninstall the old driver for the touchpad.
  This can be done in the control panel-> programs & features

  Clean the system using some freeware like for instance CCLeaner tools.
  Restart the laptop between procedures.

  Then download driver Synaptics driver Toshiba UE page.
  Alternatively, you can try to install the driver for the Synaptics driver page: http://www.synaptics.com/resources/drivers
  In my case it worked and this driver has added some additional options that I would change in the Synaptics touchpad settings

• Do not know how to install the driver LAN for Satellite A100-787

  The driver LAN for Satellite A100-787 is delivered with no configuration file and windows hardware installation does not recognize.

  I don't know how to install it... Any help?

  Hello

  I guess you are trying to install the driver LAN WXP because Vista LAN driver is not available. Am I wrong?

  In any case:
  -Create a new folder on your desktop
  -extract all downloaded files here
  -Open Device Manager and right-click on device unknown you want to install
  -choose Properties
  -find the Install driver button
  -Click on it and go to the new folder created
  -Follow the on-screen menu

  I hope that you can install to ti the pilot FTAs.

  Good bye

• How to install the driver dv6 6165tx UEFI?

  Hello...

  Guys it's Marie Laure could you help me with my problem.

  I have a laptop hp pavilion dv6 6165 tx... so, during statup operating system is showing that the the system fan is not working properly - F(1B) and I want to install UEFI driver for this problem to be solved.

  IAM unable to install UEFI driver using my flash drive. During the installation, it's show to make a partion on the disk.

  So, how to make this partition and install the driver from the UEFI. If anyone can help, it will be a great relief for me.

  Sorry, but try to install UEFI utility or support environment will not solve your problem. Most likely, you will need to clean or replace the fan to make the error message disappears.

  Please send BRAVO

• How to install the driver LAN for Satellite Pro A120

  In fact, my problem is that I didn't know how to install the driver on my Satellite Pro A120 lan connect net throug.
  The issue that there's no facility to do to complete the installation.

  And theres other question that I need the Ethernet controller

  My laptop was vista operating system installed, but I change and put Windows XP

  Please help me

  Hello

  LAN installation is very easy.
  First of all, you need the correct LAN driver.
  In order to download the LAN driver please visit the Toshiba driver page and choose your model of laptop.

  Once the LAN driver has been downloaded, you will need to decompress.
  Then you will need to access the Device Manager, choose the controller Ethernet (network cards) and must point to the place where the LAN driver was decompressed.

  Then finish the installation procedure.

• Photosmart C410A: Cannot install the Driver

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD APU A8-3820 with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5844
  Graphics card: AMD Radeon HD 6550D, 256 MB
  Hard disks: C: Total - Mo 940455, Free - Mo 855102; H: total - Mo 305234, Free - 170309 MB; Total I: - 7 MB, free - 0 MB;
  Motherboard: gateway, SX2370
  Antivirus: Norton Internet Security, updated and activated

  Apparently after a Windows Update, computer of my wife, which is connected to our printer via ethernet through our Linksys E3000 router connection, lost that connection. As the driver was out of date anyway, I downloaded just the updated driver and tried to install it after checking that all traces of the old version have been removed using the HP uninstaller program.

  Inummerable times today, tried to install the driver. I either get the the point where installation asks what kind of connection I have and when it shows via ethernet I get an error message about the MpsSvc (Windows 7 firewall) be stopped or the installation fails generate a message that says missing a setupfile. I tried to disable the firewall in Norton Internet Security and AV and the installation always fails. I tried to turn on the Windows Firewall, via the the Task Manager (with the NIS firewall off) nothing works.

  One of the solutions I found on this forum with an HP Expert was to use the complete package to install the driver. Even if I'm NOT all the programs that come with it (there is the possibility to choose what you wanted but not more) I tried. I still received the message to set firewall scenario and then had to uninstall all the programs I didn't want in the first place.

  There are two other computers in the House connected wireless to the printer and both work very well. I even tried the road wireless with this computer, nothing is done.

  I know I'm not the only one we encounter this problem as I saw other postings but I have yet to see a solution that works. I'm trying not to get both frustrated and angry but it must be an otherwise difficult problem to solve. Before the update Windows and update the driver of HP, this computer worked fine with this printer. There is a conflict between HP software and Windows 7. Please give me a solution that actually works.

  I finally found a relatively simple solution that worked. First of all, I unzipped the driver of a CD-based package. Then, I clicked on the Start button and open "devices and printers". Then I clcked on "add a printer".  I chose "add a network printer". As Windows did not have the selected HP C410a among the choices of the printer, I have disk driver and connected to the CD file. Windows finds the driver, installed and everything works as it should. Certainly, the icon of the printer is not the C410A but all the functionality of software works so I don't care.

  On my wife's computer, I followed the same procedure except that I chose the option "Local printer", as his office is connected to the router via an ethernet cable. For some reason, his computer also had the HP C410A among printers whose drivers available and Windows loading automatically good. Everything is fine with his computer in terms be able to print. Again, not the cool little icon C410A under "Devices and printers", but it works.

  The really good part of doing it this way is that I didn't have to install all the unwanted HP softerware which comes with the "complete package".

  I appreciate everyone's help.

• Installing the driver on the Qosmio G20

  I have a G20 machine (bought from the Japan) and I want to install my copy of XP pro.

  XP Setup works well until the end, then I start to install the driver and the software as suggested by Toshiba:

  acoustic silencer V1.00.005A
  help V1.02.00_TINASSIST_NUER20MA
  --> NOT INSTALLED atheros wlan 802.11ag / utility V3.1.2.19I123 g
  --> Bluetooth has NOT BEEN followed V2.0 (B20041111)
  Toshiba bluetooth stack V3.3.10.01 BUILD20041209
  Texas instruments pcixx21 flashmedia driver V1.0.2.1 INSTALLER BUGFIX
  Utility Intel chipset software installation V6.1.0.1008
  common modules V6.02.04
  ConfigFree V5.00.48
  controls V3.16.2400
  display the change of aircraft V1.6.0.0 utility
  NVIDIA geforce go 6600 display V6.14.10.7118 driver
  Hotkey to display V2.8.0.0 - 00 - XP
  fix for "cumulative security update for ie ' Q834707
  fix for "question in hyperterminal could allow code execution" KB873339
  fix for 'problem in the kernel windows and lsass' KB885835
  fix for "issue in wordpad could allow code execution" KB885836
  fix for 'windows firewall only my network (or subnet)' KB886185
  --> NOT INSTALLED hardware (dep) - active computer may quit unexpectedly after recovery from sleep mode or hibernation in windows xp service pack 2 Q889673
  SM214710AD2 Toshiba software modem
  V8.0.1.1 card WIRELESS Intel(r) pro/100 ve
  PC V3.1.0 diagnostic tool
  development of picture V2.7.0.2 utility
  V7.05.04 energy saving
  Toshiba V1.00.0013 for NUR20 raid driver
  utility RAID V1.2.0.25
  SD V2.0.2.1A memory card format
  secure module SD V1.0.2
  SoundMax integrated digital audio V5.12.01.5240U
  --> NOT INSTALLED sun java 2 runtime environment V1.5.0
  Touch and the launch of V1.2.7.0
  V6.0.304.6 Alps pointing device driver
  Press the start/stop utility V2.05.00
  utilities V4.20.26
  Virtual sound v1.00.05UPDATE
  V2.0.0.5 wireless keyboard shortcut
  wireless network card mini pci Atheros ar5001x V3.1.2.45
  Intel wireless b/g V9.0.1.9 lan driver
  utility V2.0.0.20C zoom

  In addition to the above, I have install the driver of TV tuner driver DVD RAM, the utility Maximizer and does not have the cause of the Atheros 802.11 driver, it seems, the machine has a network card Intel (is true?)

  But when I arrived at the end of this procedure the system starts and works fine the first time, but when I restart the machine that the hourglass will for centuries and I need to restart in safe mode using the Manager tasks.

  I have a feeling that the problem is related to the utility Configfree or be WIFI.

  I tried to uninstall the Configfree but the problem is still there!

  There, can someone help me? !!

  Hello

  You are right. If the device has an Intel WLan card you n t need to install Atheros utility and Atheros WLan driver. But you need the Intel WLan driver.
  I don t think that the problem is the utility Configfree. In my opinion you should check into the full background due to CPU performance process using Task Manager.

  Good bye

• Problems installing the driver for the ToolsCD - Satellite P100-277

  Hello

  I got a Satellite P100-277, I have formatted and reinstalled windows xp on due to virus issues.

  Before I did it, I copied the folder "toolscd" of the HD intern on my external HD.
  Now, I reinstalled all the drivers, but with some drivers, there is no setup.exe and I do not understand how I can install these drivers then.

  For example, my audio driver, the 'Driver Sound' folder contains DLL, SYS, XML, CAT and INI files.
  But I don't know how I can install the driver.

  I hope you guys can help me out here, thx!

  > Now, I reinstalled all the drivers, but with some drivers, there is no setup.exe and I do not understand how I can install these drivers then.

  Some drivers must be installed in the Device Manager.
  Mark the device, push the button update driver and point to the files that are stored on your HARD drive

  Good bye