Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.

Similar Questions

• Dell Vostro 3550 USB PORT don't DO NOT WORK

  Hi all

  I recently bought the Dell Vostro 3550 (2 days back) and I just realized that only one of the 3 usb ports work.

  1 USB PORT at the BACK (USB 3) does not

  1 LAW of USB PORT (USB 3) does not

  1 works of LEFT USB (USB 2)

  LEFT 1 USB PORT (USB 2.0 / SATA) WORK

  Why not the other. I even updated the BIOS. HELP PLEASE

  Hello

  I recommend you to try the following steps to check the USB ports. First of all I recommend uninstalling and reinstalling concentrators root USB from Device Manager. Please follow the steps below to reinstall the USB root hubs:

  • Click Start, in start search type Device Manager and press ENTER.
  • Expand Bus USB controllers.
  • Right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  • Restart the computer and check.

  If the USB ports still do not work, please click the link below and download the USB 3.0 host controller.

  http://Dell.to/PKU06y

  I hope this helps. Just reply to other questions.

• How to create a bootable Windows Vista USB drive? I can't install Windows Vista with a disk because my dvd drive does not work.

  I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do

  Please send your reply to my email id, or post it here...

  Hello

  Vista is not designed to be installed like this.

  But others led to ways to do so.

  This may interest you on this subject:

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  Google will help you in this matter.

   

  See you soon.

• USB port is powered but not working

  Hey guys,.

  One of my usb ports decided to stop working properly, I am still able to use devices that ONLY require a power supply, one example being my external fan that works very well in this port.

  However, I'm unable to use my mouse or any storage device in the port.

  The lights (as appropriate) on the devices will be turn on as normal but will not do much than that.

  I did not major changes since the last time that the port has been used successfully, it has just stopped working.

  I rebooted several times and the problem persists.

  All the other usb ports of normal work, no problem.

  Data sheet:

  Pavilion DV6-7029TX

  Running 64-bit Windows 8 Pro

  All up to date with windows updates

  If any other information is needed please let me know.

  I'd appreciate any help someone can provide to help me get to the bottom of this.

  See you soon.

  -Brendan - Hello,

  I think we should ALL drivers. The Chipset drivers are the drivers for your motherboard and other drivers for individual embedded devices. I think we should do your Chipset Drivers first, and then the pilots on your side. Like building a House we ensure that the Foundation is solid before adding home on top. What I would like to is to download and install ALL the drivers from the HP Pavilion dv6-7029tx Entertainment Notebook PC Drivers page. Make sure that you download and install the drivers for the Chipset first, after that is not matter which order you install the drivers.

  Please re-post with the results on one of the threads that you have on the go. Thanks for posting on the HP Forums. Have a great day!

• 3 USB ports on 4 does not work on Satellite A660-12th

  Hi, I have a problem with my laptop french: 3 or 4 of my usb ports does not work.

  My laptop is a:
  Satellite A660-12th
  Reference: PSAW3E-02700GFR

  I almost tried everything:
  -reinstall all drivers
  -Uninstalling the root USB controller and restart the computer
  -Finally to format my laptop and clean reinstall.

  -3 ports still does not work and I do not know how to solve them.

  I bought an of 2 TB external HARD drive and its driver is installed but not recognized by the last working USB port. I really need to fix the other 3. Could you help me?

  Wait a moment have you tested all 3 USB ports only for external 2 TB HDD?
  How USB ports do not work if you connect a USB mouse or a USB flash memory stick?

  Page plug Toshiba says that this laptop supports 3 2.0 USB ports: 1 left, 2 right
  The one on the left is a port eSATA/USB 2.0 supporting sleep and fresh.

• Pavilion 500-081ea: FRONT USB 3 PORTS don't DO NOT WORK.

  I recently had an ASROCK H61M-DG3/USB3 motherboard mounted in my not so old (18 months) HP Pavilion PC 500 - 081ea & even if original HP 3 USB ports are connected to my new motherboard that do not work.  All the USB in the BIOS settings are turned on & the right USB drivers are installed in "Device Manager" without conflicts I still can't use the two front 3 USB ports.

  Hi Jeff,

  The reference to a technician came from your other messages.  In any case, the cable USB 3 header, as previously mentioned will restrict the question.   I keep this cable in my toolbox for situations like yours when I change sets and motherboards.

• Professional Windows XP search page and the System Restore page do not work.

  I recently did a clean install of Windows XP Professional on a laptop. I then upgraded to SP 3. I wanted to update some of my drivers and when I tried to open the page the system restore to create a restore point, the page is empty.  Later when I had questions, I tried to do a search and I have basically the same question. The search page opens with the puppy in the blue box, but nothing else.  Someone has seen this before and can help you. I can do another clean install if I have to, but I try to avoid it if I can.  Thank you in advance for any help I can get.

  Jayme

  No matter what media you used to install XP.

  You don't have symptoms consistent with a need to run sfc/scannow.

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) US $100.

  That Microsoft technical support engineers constantly not to mention, is that if you have installed SP3 from a download and your XP installation CD bootable real is not SP3 (what is?) running sfc/scannow will upset you constantly to insert your installation of SP3 CD and you will last anything else than a big frustrating waste of your time.  It will not help you in any case.

  @Microsoft support Engineer Imran M: Please explain why you think the sfc/scannow will correct this problem.

  Also, you have none of the symptoms consistent with a need to run the fix it.  Next, you need not to "check if it helps" - you need your fix.

  In fact, I've recreated the problem on my system and run the fix it and here is what he said:

  We did not identify any problems and that's why no fixes have been applied.

  Here is my usual full answer to the symptoms you describe.  If you have not been on the Internet with your own installation, your system should not have malware on it (yet), but I have at least "would fix the immediate question" as shown below by the three mentioned DLLs:

  If your system restore page display only the title bar 'System Restore' or your user accounts settings page don't watch the title bar of "User accounts" and the screen where information needs to be is an empty white box, and/or your Windows Search function shows just Rover (the animated search dog)...

  System Restore is a frequent target of attacks by malicious software.  If SR was working before and is now afflicted, run some scans and then fix any problems.

  Remember that the system restore is not a time machine.

  Your system is currently or has been reached by malicious software.

  You can now fix the symptom and scanning for malware later, or you can now find malware and fix the remains later.  I recommend just fixing the symptom of the empty page and forget to do the scans.  The symptom of the problem of fixing and fixing the problem are two different things.

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

  Just fix the immediate question:

  Looks like your file jscript.dll became somehow not registered so you can re-record it.

  There are probably a few other things that do not work you know yet, so fix them all at once.

  Re-registration of these DLLs is correct, even if they do not need renewal.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time.

  regsvr32 jscript.dll
  regsvr32 vbscript.dll
  regsvr32 /i mshtml.dll (it's a look of slash)

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

• Install windows on old laptop Got 8 new replacement battery-sector not work problem

  Hi all!

  I have an old laptop Vaio VGN-SR130E. A few months back, I installed windows 8 on it. Microsoft compatibility check approved. Everything was working fine until yesterday, I installed a new spare battery (former it was is unloaded in minutes).
  That is to say "57% (plugged not supported).
  I don't have on this laptop Vaio Control Center and all other services Vaio reason clean installation of windows 8. So I can't say it's the origin of problems battery care function. Already tried to shut down the computer laptop and now the power button / stop after removing the battery. Did not work.
  Can not turn on the laptop without the AC adapter / CC, but after that windows is on I can remove the adapter and system works very well.
  Any help would be appreciated.
  Thanx.

  Thank you, Mr. Ganesh

  I tried to install the software from the disc without success. So I contacted the seller, and they were sent to me by e-mail. Now, I installed it, it was an update for the bios and the battery works perfectly fine now. Thank you very much for your help.

  Concerning

  Abrar Ahmad

• Installed a new wireless router and now the wireless printer does not work

  We installed a new wireless router and now our Dell V305 will communicate or print with our laptops.  Any help apprecaited!

  You re-configured the printer to work with the new router wireless? Boulder computer Maven
  Most Microsoft Valuable Professional

• I installed windows 8 on dv6-6023tx. HP support Assistant does not work.

  I installed currently windows 8 on my dv6-6023tx, there seems to be a problem with my hp support assistant and there is also an error message saying pc questions firewalla nd spyware does not (I have norton 360).

  Please download the latest HP Support Assistant compatible with Windows 8 from following link:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

  Please provide the full error message.

• I had to reinstall the operating system on the computer of my cousin... Windows Vista Home Premium and now the activation key does not work... Message is already key indicators

  the computer in question is anAcer Aspire 4720Z activation key is: * Remove *.

  Hello dandy175,

  This is perfectly normal. Using just the telephone option to activate.

  See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm

  Either way, edit your message and remove the key data product until someone steals! Never enter the details key product or email addresses in the messages of the forum. It's for your own safety.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I just installed windows 7 ultimate. now my hp business inkjet 1100 does not work.

  Get the print error message
  I used the substiture suggested driver for hp business inkjet 1000 and it doesn't work. He sees the printer but I get an error when I try to print. It worked fine on Vista Home Premium.

  Hello
  Check this box:printer HP Business Inkjet 1100 under Win7 .

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• USB Port Dell monitor does not work

  Hai All,

  I use the monitor LCD Dell dell optiplex 330 CPU. If I am Connect USB keyboard or mouse to control the USB it does not with us. It has a setting to activate the USB Monitor?

  Hi Dinesh.P,

  Can I know the model number of monitor?

  Check if the upstream USB cable is connected to the monitor. For more information, see the image below:

  

  Waiting for your answer!

• I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet

  I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...

• Driver files that run the parallel port and USB port

  In the system information utility where to look to find the parallel port and the port driver USB, name of file that manages these?

  Know the drivers specific, is only half the story.  Why you looking for these drivers?  You have problems with your parallel port or USB port?  This can be caused by problems with drivers or it could be a hardware problem (hard to diagnose a hardware problem without good parts to swap and test).  If you need to update the drivers, you must use device (not msinfo32) Manager - or maybe clicking on an executable file that loads the drivers automatically (depends on how it is sent by download).

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need drivers (I assume that you want to the parallel port and USB ports), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.  Or run the Setup program of driver provided by the vendor of the computer or the manufacturer of the device.  Be VERY careful get Vista compatible drivers for these devices are difficult to identify (they usually come with the numbers of model or something like that if they can have serial numbers) and using the wrong drivers could make the problem (whatever that is) worse.

  If you update the drivers succerssfully and the problem persists, then it is probably a hardware problem.  In this case, contact the manufacturer of your computer for technical support (hopeully it is still under warranty) or bring it to a professional computer repairman (NOT Geek Squad or one of those big store centers because they don't really know what they're doing and charge a lot for this level of expertise) to have the components tested and possibly replaced.

  I hlpe that aid.

  Good luck! Lorien - MCSA/MCSE/network + / A +.