Installed Windows 7 - Second monitor not detected

Similar Questions

• Second monitor not detected Windows 8

  Hi all

  The title pretty much everything said. Windows 8, two monitors to flat screen of ACER, HP pc, worked fine. I went to the control panel and although both monitors are on and work the 2nd is not detected. By clicking on "detect" a small window shows "another view undetected."
  The display on the second monitor as I said is on, but the mouse pointer does not move on the 2nd monitor and my desktop icons that were there is now on my 1st monitor. I tried to update the software for graphics card and monitor software as well, both are up to date.
  I tried to contact Microsoft Support, but I guess that there was a problem of mass with the update because I can't seem to online or over the phone.
  I tried to restore the computer to its last restore point, but that did not help.

  Can anyone suggest a solution?

  Thank you very much

  Original title: update 2nd monitor is not recognized after the last windows of nights.

  CORRECTION *.

  Reinstall the drivers worked. I didn't know what I had to do was desempilement monitors and place them side by side in the Panel. (Right-click on the display, the screen resolution, drag a monitor so that it is next to each other instead of one on top of the other)
  There is just a nut loose on the keyboard here. (ME)
  Thanks for your help.

• HP Pavilion a6750f: problem dual monitor (Second monitor not detected in DVI input)

  Hello everyone, I'm going to by a problem of not being able to setp toward the top of my second monitor.

  I own a HP Pavilion a6750f with an ATI Radeon HD 3200 card on board running on Windows 7 Ultimate 64 bit operating system.  In the back, I have two VGA and DVI inputs, VGA works, but when I connect the other monitor which is connected to a DVI adapter on the back, Windows does not detect any.

  I tried to go the DVI adapter to the other monitor and noticed that it refuses to work. I will note that my display drivers are all updated and I activated the option of customization to detect the second monitor, nothing shows up, it will not be the same acknolowdge that there are several screens.

  I think it's weird that I don't see this problem being issued when I was searching for a resolution on google for hours now. If someone can help me here please I would be very happy.

  Just to remind you try to connect a VGA (analog) monitor to a DVI - D (digital only) output on the computer. This is never going to work as analog and digital are two completely different incompatible signalling methods. With the help of an adapter DVI / VGA passive is the problem that these cards may work with DVI - I or DVI - A output... not DVI - D.

  Wikipedia - DVI;

  "More digital, the DVI connector includes pins that carry an analog signal compatible with RGBHV signals in a VGA connector. This allows a VGA monitor be connected to a passive adapter and offers a universal solution for the DVI interface. The analog pins are the four that surround the apartment or cross the blade as shown on the right side of the diagrams below. »

  

  8 analog vertical sync

  C1 - analog Red
  C2 - analog Green
  C3 - blue analog
  C4 - analog horizontal sync
  C5 - analog ground

  Note the absence of the pins on your computer and your so-called card C1, C2, C3 and C4. Without these pins is not just going to work. Still, there is no way to get an analog VGA monitor to work with your digital DVI - D only output using a so-called DVI - D to VGA. You may be able to buy an asset DVI - D to VGA Converter, but this will be expensive and cannot provide a poor video image quality.

  As you said, the HP f1703 monitor supports only VGA. However, based on the specifications, your HP w2207h 22 inch LCD monitor supports the entry to a VGA and a HDMI input. HDMI and DVI - D share the same signage and using a HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable will solve your problem. For two monitors running on your computer, please connect as follows:

  Computer > HDMI-DVI cable or adapter HDMI-DVI and HDMI Cable > HP w2207h monitor

  Computer > VGA cable > HP f1703 monitor

  Please send Bravo

• When you try to re - install Windows XP, it does not detect the hard drive.

  Hi all. I tired to do a reinstall of Windows XP today. It seems to take a lot of time, and then I did a very stupid thing. I turned off the laptop that I had to go. Now when I try to start the laptop on the cd, I get as far the screen where I have to press on enter to install Windows XP pro on the system or press R to repair. The problem is that there is now no facilities to choose from in the box below and the system is not recognizing the hard drive. I can't even as much as the screen to format the drive. When I press ENTER to install windows xp, then I get a blue screen telling me that the system shuts down to protect my pc. Is anyone able to tell me what to do to solve this problem please. Thank you very much in advance for your help. Noel

  original title: I did a stupid thing... Windows XP Pro

  Sounds like a hard drive problem then. Your drive is maybe defective. First of all, you can use the partition of diagnostic Dell (F12) for its determination.

  In case there is a SATA problem, press F2 to enter the BIOS and change the setting of hard disk SATA to legacy. (Might as well try this first.)

• Second monitor not detected via the dvi - d port

  Hi I have a Hp slimline s5610y. Windows 7 64-bit. It is a new system with 3 ghz ram and more than 600 gaeremynck ram so I know that this is not a problem of performance, (duty handling system), I am looking to hook up two monitors, product sheet page on H.P. States that ports Vga and Dvi d may be used at the same time. I have the converter dvi-d/VGA, hooked to a monitor via the Vga port on a single computer (which doesn't work). The Vga port to vga works fine (the first monitor. I already check the easy as stuf "carrier dual monitor", unplug the monitor, update the latest driver for radeon 3000 and restart windows. I hooked two monitors before without any problem. Any ideas out there?

  Thank you

  Manny

  Hi again,

  If it is a dvi - d, you need a computer screens which have dvi - d.
  A graphics card with a dvi - i port also supports vga monitors.

  OK - page of your product (return i/o ports):
  http://support.HP.com/us-en/document/c02552467

  It is a true dvi - d - then Yes, you need a digital monitor with a dvi - d port.

  C.

• Windows Phone 8 is not detected by the computer

  Hello

  Recently I tried to connect my phone to my computer windows, he chrges but didn't appear on the computer.ive tried to connect my ch yoke, but it will not pick up. Ive tried uninstalling the usb device controllers manager but whil im making it run on my keyboard and mouse.

  Help, please

  Original title: Usb port giving power but not showing devices

  Hello

  Thanks for posting in the Microsoft Community Forum.

  I appreciate your efforts to resolve the issue. According to the description, I understand that you can not see your phone in windows Explorer when you connect to the USB port. This could happen have come into conflict with the existing application in your computer. I can understand the frustration when things don't work as expected.

  I would like you to provide us with more details so that we would be able to find the root cause of the problem:

  1. What is the brand and model of your computer?
  2. What is the brand and model of your phone?
  3. Were you able to see your phone under Windows Explorer before?
  4. You have recently made any changes to your computer?

  In the meantime, I suggest you try the method:

  Method 1:

  Try running Microsoft fixit to hardware devices do not work or are not detected in Windows.

  Follow the link:

  http://support.Microsoft.com/mats/hardware_device_problems

  Try to connect to another USB port as well and check if it is detected.

  You can also read our article on Windows Phone 8 is not detected by your computer

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Impossible to install custom Windows 7 like drive not detected

  Hello! I have a problem with my installation of windows, I can't select partitions because s does not exist. Only see the drivers are my usb device and start: (...) I tried to format the partition with cmd but does not score was only 3600 MB (my usb memory), and I deleted my windows! any suggestions? THX

  Original title: installation of Windows 7

  Hello

  Sorry for the delay in responding,

  Thanks for the update and send the screen shot for the same thing. According to the screen shot, it seems that you have chosen the wrong option (Ex - like load a driver) because you do not receive the displayed records.

  Please follow the steps below and check if it helps.

  (A) start the computer from your Windows 7 installation DVD.
  (B) when you are prompted, Press any key to boot from the installation DVD.
  (C) select your language preferences and click on the Next button.
  Click the install button to start the installation.
  If you did step 1, then uncheck the I want to help make Windows installation better area (unless you want), and then click the go online to get the latest updates for installation option.
  If you did step 1, Windows 7 will now check online and install the available installation updates.
  Check I accept the license terms box, and click Next.

  Click (Advanced) custom option. (See screenshot below)

  

  Select the hard drive or partition for the installation of currently installed Windows you want to install Windows 7 on and click on the Next button.

  Click OK.

  Windows 7 installation will now begin.

  It will be useful,

  Concerning

• Then monitor not detected on win - 7, but works on Vista

  Background: Dell Vostro 1500 pc.  Acer HD 2nd monitor.

  I am trying to add Windows 7 Home Premium to another disk partition (d :)).  Now, I have win 7 and Vista dual bootable.  My second monitor, connected via a port SVC (?) 9-pin, is detected and works well on Vista, but Windows 7 does not detect.  I tried both the and-> screen resolution detect methods.  What is my next step?

  Thank you

  Jim

  The fix for the problem proved to be to download the latest driver for my NVIDIA graphics card.

• Wrong side of Windows 7 second monitor.

  Hello

  I have Windows 7 RC installed with two monitors, works fine... the only problem is that to access the second monitor I need to move the mouse to the left.
  I hate this... I would like to move the mouse to the right to access the second monitor.
  Anyway, is that you can change the direction to access the second monitor? As I am wright handed, I found annoying feature to move the mouse to the left to access the second monitor. I used VISTA previously and the second monitor was accessed by pointing the mouse on the wright. Is a specific reason that the mouse needs to be directed to the left in Windows 7?

  Hi... Control Panel > display > then click on change display settings > and from there you can drag the screens to position them as you wish.
  (do to swipe the screen left click and drag at the same time)
  I had the same problem, but here, I played with it until I got it like I wanted...

• Windows 7 Enterprise does not detect DVD

  Hi, I recently installed a trial version of windows 7 Enterprise on my Macbook with the help of VMware Fusion. When I insert a DVD into my Macbook the DVD or its contents appears in Windows 7 'Computer' where the disks.  I had already installed Windows 8 using Parallels and I could see the DVD and its contents in 'computer '. The DVD and its contents appear also on the MAC desktop as usual. Please provide me the solution to this because I want to run a program that is not compatible with Windows 8.

  Hello

  The unit itself is detected? You see the drive letter?

  Method 1:

  If you do not see the drive letter, I suggest to open disk management, then make sure that you assign the drive letter for the drive.

  
  

  Reference:

  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/is-is/Windows7/change-add-or-remove-a-drive-letter

  
  

  
  

  Method 2:

  If you are able to see the drive letter, I suggest you to remove the filter upper and lower registry filters.

  
  

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  Method 3:

  
  

  If the problem persists, I suggest to run the troubleshooter of material

  
  

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  I hope this helps.

• I installed windows 8 and can not find all my favorites etc. I tried to reset, but it did not help. How can I restore my old info?

  I tried to find my old firefox database files on explorer 7, but the old files I tried came because can not open or cannot be found. I tried the suggestions of mozilla help on what files contain the news but got the same results. I have reset but it did give me a few new things I've done since the installation of windows 8.

  Hello, have you installed windows 8, more an another operating system on a single computer and you have any form of prior backup available?
  one thing you might try is to search the whole file system (make sure to include also hidden sites) for the term bookmarks*.json - if all results appear with a date in the file name that is before installing windows, then you probably import them into your firefox profile.

• OfficeJet 6230: After installing Windows 10 printer does not work

  I installed Windows 10 yesterday and now my HP Officejet 6230 does not work. First there was the message "print head problem. After going through steps to correct the problem, control list shows all green checks but does not always print and now I get the message that my printer has a serious problem. I had this printer less than a year. Help, please.

  Hi, thanks for your comments. Please contact the support. Thank you.

• After installing windows XP sp3 do not work my motherboard drivers intel

  After installing windows XP sp3 my motherboard drivers intel do not work. My mother board D845 GLAD. What could be the problim?

  Try reinstalling the drivers for your motherboard chipset, you can check this link to download the chipset driver:http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Desktop+Boards&ProductLine=Intel%c2%ae+845+Chipset+Family+Boards&ProductProduct=Intel%c2%ae+Desktop+Board+D845GLAD

  Also, try to download the drivers from your computer manufacturer site... Their number is 800-936-5700, and they are open Monday - Friday, 05:00-21:00 Pacific, Saturday & Sunday, 06:00 - 15:00 PST. XD

• Windows Vista recovery failed, then I install Windows 8 on the not Bootable Windows Vista.

  I bought a PC from a friend, Windows Vista Home Premium.
  Has tried to run a system recovery, but stopped by error 0xd0000017.
  I then created USB boot killdisk to wipe and clean my hard drive, but I think I accidentally delete the wrong volume.
  Not to restart the PC indicating that the file is missing please insert the disc of Windows Setup.
  I downloaded and burned Windows Vista Recovery ISO but could not run the "repair", not re - install.
  I guess the only solution is to buy an upgrade of Windows 8 and clean install it.
  But what bothers me is:
  I don't know if I have a prepared partition when Windows 8 invite "where you want to install windows 8. Help, please. Thank you very much.

  "It's true that the product key is no longer valid with this particular brand? or I can activate the product key for 2 years with any Installation of Windows Vista DVD? »

  Reread my original answer.

  I gave you the information about what you are now on.