Installed Windows on a new hard drive with an old processor, the video controller, there are no drivers

Similar Questions

• How to install windows on a new hard drive

  I lost my hard drive and buy a new.  I do not have my disk but have a product code valid for my computer.   How to install windows on a new hard drive

  OT:

  Windows 7 home premium edition

  You will need to borrow a disc of Windows 7 Home Edition Premium or borrow a disk upgrade or full version retail and create a bootable copy with option to select Windows 7 Home Premium during installation. To learn more:

  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

• Can I transfer creative suite adobe in a new hard drive with time machine if the current hard drive failed?

  My drive hard mac failed and I got a new drive to come. I save the news a few weeks before the accident with time machine.

  Can I transfer creative suite adobe in a new hard drive with time machine if the current hard drive failed?

  Hello

  Transfer of the installed application would not work properly.

  I advise you to install the application again.

  Kind regards

  Sheena

• install windows on a new hard drive

  Hi, my laptop has been commissioning so I bought a new hard drive and installed myself. The problem is that I don't have the recovery disks that came with it when we bought it. How can I install windows 7 or vista on the new hard drive.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Install windows 7 on new HARD drive without dvd/usb?

  I have a laptop (windows 7) which is the HARD drive has failed. I want to buy a new HARD drive and replace the failure, but I have no DVD or USB with windows 7 to install on new HARD drive. I have the product key on the lower part of the machine.

  Could someone please offer some advice on how to go about loading the operating system on the new HARD drive. Thanks in advance.

  Hello

  You will need to make a DVD or USB key to reinstall the operating system or of order recovery disks

  You can contact the manufacturer of your laptop and ask them to send you a set of recovery disks.

  Manufacturers that make normally for a fee.

  ________________________________

  Or download the correct ISO file and make your own drive and use the product key located on the COA sticker.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  Then do a clean install:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  The COA sticker is either on the underside of the laptop or in the battery compartment (you did already).

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  By using the downloaded ISO file method can require the Activation of phone.

  If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

  The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

   

  ________________________________________________

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  See you soon.

• How to install W7 on a new hard drive with an upgrade disc

  This issue was published and responded differently and I'm looking to help determine that I'm not just doing.

  I have a desktop dell Inspiron 540 initially installed with vista and upgraded to w7 with upgrade disk.  PC currently has a raid 0 on two drives configuration.  I want to do a clean install of w7 on a new 2 gig disk and remove my raid disk, so I unplugged my raid drives and plugged the new drive with the boot sequence set on DVD as priority to start.  When I put the drive of W7 the PC starts and begins installation of W7 and passes by a couple of reboots before it comes to rest on and the screen eventually white.  My questions are the following:

  (1) is the w7 stall out because it's only a upgrade disk.  I've read that even an upgrade disc must fill a system knowing that I finally needed to authenticate the license but this not yet get there.

  (2) or is the problem that none of the original pilot was loaded onto the new drive before trying to install w7?  I don't know if I have the disks just as the PC was rebuilt with new hardware warranty, so I don't know the Dell disks I have are no longer valid and if I install w7 without them.

  (3) if I do not have the right Dell driver disks is there a way to only install drivers without having to install as I prefer to do a clean vista w7 install.

  (4) when my pc normally starts in a raid 0 configuration and passes to the bios Setup screen, there will be an another intel matrix storage screen which is where I need to enter CTRL + I to enter the raid configuration...  After that I disconnected my original discs and installed a new this screen intel never presented itself - is that because I have not installed the drivers from dell?

  (5) others have suggested that I should keep the original discs in place for now, install my new hard drive, install W7 on the new drive and then delete older readers.  However, if I do and if Miss me the physical disks, if I remove the old drives, which allows W7 still starts it correctly once I deleted the old hard.

  THX,

  The disc itself is a full install of W7, it is key that defines as an upgrade and the normal solution to a blank disc is not enter key questioned at first, but to call the Activation Center later. That's because Windows 7 is a completely new system and use nothing of Vista/XP even if the upgrade should be complete.

  If the system restarts once again successfully during the installation, then it booted from the HARD disk as the installation tasks are all made from there. As JW suggests to test the HARD drive, most manufacturers offer on their website diagnostic utilities that are in the CD or bootable USB format then not dependent on the installed o/s. In addition, a contender is memeory questions, either swap autour, replace or reduce the system to a stick to eliminate the problems.

  Make sure RAID mode has been disabled in the BIOS for Windows 7 AHCI or SATA mode should work well when a single drive is equipped with RAID should disable auto. The keys Ctrl + I is a precursor of the o/s drivers so a function RAID BIOS Setup screen is not apply to it is not there. He disappeared because there is a single disc and you can't build a matrix on a single disc.

  All compatible motherboards in PC today have all the installation of Windows 7 no driver needed. They are normally added after the initial installation. If it's still a Dell Mobo, then the same driver drive should work as it will identify all required driver.

• Install XP on a new hard drive using my old cd key

  My current hard drive gives me a lot of trouble so I decided to buy a new.

  But im worried if I install xp with my old cd key on a new hard drive would cause it to be not genuine.
  BTW, my version is an OEM xp professional

  You can install OEM XP Professional on a new hard drive on the same computer using the same CD key.

  If Windows XP asks you to activate the product, start the activation process via Internet.  If that says that the CD key has already been installed on another computer, activate by phone and explain the situation to the person at Microsoft.

• problem with connection to the internet after installing Windows 7 on new hard drive

  I have problem with old hard drive, so I change. I replace it with a new drive of the same size, so I download the Windows 7 disc to reinstall it. I received the product from the bottom of my laptop key. all look good, until when it is I can't connect to the internet. I can't find also manage network connections on my computer. When I go to "change the map settings" nothing is there. "when I go to connect to the network, not connected to the top pop, then I'm going to shoot bad to say" windows did not detect a network card installed properly, if you have a network card, you will need to re install the driver. "windows can't find a driver for your network card. Please help my fix to this problem. Thank you.

  You must download and install the driver for your network card.  It is best to get it fron the computer manufacturers web site.  You will have to get on another computer and copy it to a Flash DRIVE or a CD to run on your.

• Cannot install Windows 7 on new hard drive, it says that it cannot parition it nor did he have any predefined partition.

  Original title: I am replacing a hard drive in a laptop Toshiba L670 with a seagate ssd.

  I am replacing a hard drive in a laptop Toshiba L670 with a seagate ssd. . The hard drive was dead, so I have to load windows from a flash drive. I am trying to load windows 7 on the new drive, but the software does not recognize.  It is said that he can not parition it nor did he have any predefined partition. Anyone out there have any suggestions? When I try to find a driver there doesn't seem to be all for this issue. Any suggestions will be appreciated. Scott

  Hi Scott,.

  The cause of this issue with all of the troubleshooting steps to resolve this problem, are suggested in the link mentioned below. Please refer to him and check if it helps.

  You cannot select or format a disk partition hard when you try to install Windows Vista, Windows 7 or Windows Server 2008 R2.

  http://support.Microsoft.com/kb/927520/en-us

  CHKDSK WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  If you receive errors that your Windows 7 is not genuine, please turn it on.

  Activate Windows on this computer

  http://Windows.Microsoft.com/en-in/Windows/activate-Windows#1TC=Windows-7

  Hope that the information provided is useful. If the problem persists, please answer and we will be happy to help you.

• Install Windows on a new hard drive while maintaining the files on the old?

  I have Windows 7 64-bit on my stock 500 GB hard drive. I have a 64 GB mSATA which I would like to do a clean install of Win7 on. Regarding the 500 gig HD, I would like to wipe and partition (it is loaded with bloatware and probably malware) but if possible, I like to keep a few photos and mp3s. I have to wipe everything, or can I just install Win7 and start-up of the SSD, then delete what I want on the other hard drive?

  I suggest at the very least, you back up your personal folder in C:\Users\Your_AccountName on a hard drive external.

  Proceed to install Windows 7 on SSD, reactivate so you keep the 500 GB attached as a slave drive and format it. You could even redirect your personal folders to it after formatting it.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  How to redirect your personal Folders in Windows 7 : Notebooks.com

• Satellite L500 - how to install Windows 7 on new HARD drive

  I just bought 2 satellite L500 1xl/1xj second hand to re sell one and keep the other.

  It's both fired their HARD drive and I have no installation CD re install Windows 7.
  How can I do this without the CD or the original HARD drive?

  > I have no CD installer again to install windows 7, how can I do this without the CD or the original hard drive?

  Get Windows copy disk and installation, all the drivers are available on the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] you can also buy a [recovery disk | https://backupmedia.toshiba.eu/landing.aspx] I see no other options to do so.

• Image vs cloning on the new HARD drive with an operating system already installed.

  First of all, I'm NOT tech savvy.  I apologize in advance.

  After several warnings error that my hard drive was in danger of failing, I was finally able to install a new HARD drive.  Windows has had some difficulty in installing Windows 7 to new HARD drive, but I finally found a solution.  So here's my current situation.

  I have the main drive (old) (C:\) which has Windows 7 and all my data on it (it is a Seagate 1 TB HARD drive that came installed on my Dell Studio XPS 8100).  I installed a new WD Black 1 TB HARD drive and was finally able to get Windows to download on it (it reads now like two distinct? score?) E:\ and F:\) see photo.

  

  Now, my question is this...

  I want to save all my data from my old HDD and put it on my new HARD drive.  One that I have this, I would like to remove the old Windows 7 HDD and use it as "extra" space

  Make a clone of the old HARD drive to the new since I have already installed the new Windows 7 HARD disk?

  Please advise and please keep in mind that I might say things correctly and I can't understand though if the answers are on my level.  I appreciate any help!

  OK, so here is what I would do to try to avoid problems of compatibility or driver, as far as I can:
  -Turn off your system completely and unplug from the power outlet wall
  -Disconnect the old drive in your system (SATA and power cables)
  -Place the new WD Black on the main port SATA (should be labeled SATA0)
  -Turn on your system and put your OS drive you can do a completely new installation of the operating system.
  S ' ensure that you have updated all the drivers and the operating system after the installation
  -Turn off your system and plug your old drive
  -Turn on the system in the BIOS and make sure the WD Black has the priority starting on the old HDD
  -Boot into the operating system and copy all data from the start of your old disk partition that you want to keep for the WD Black
  -Go to disk management and delete the old boot partitions and the old drive system
  -The old HDD should be your secondary drive now and you can freely move files between the two disks
  N ' have in mind that due to the new copy of the OS, you must reinstall all the games and programs in order to operate because of the new system registry

  This should put you on the safe side and prevent any compatibility issue or driver which is possible during a clone or restore procedure. :)

  Captain_WD.

• Install Windows 7 on the new hard drive with USB operating system recovery?

  I have an Alienware 2015 15 which does not come with a CD player. I install a new hard drive (SSD 2280 m2), so the question is how to install WIndows 7.

  While Microsoft offers an OS IOS for WIndows 8 download that you can put on a USB (with dell, I think that it automatically pulls the product key of BONE off the coast of the motherboard?) this IOS download is not available for Windows 7.

  So the question is the recovery USB OS offered by dell will allow me to do a fresh install of Windows 7 on a new hard drive in the laptop even USB from recovery of the BONES came with. My last resort is to buy a new copy of windows 7 and a USB external CD/DVD drive.

  TLDR: OS Recovery USB offered by dell will install Windows 7 on a new hard drive.

  The factory restore USB will work on another drive. I did this procedure with the media created from the latest version of Dell backup and restore on my Inspiron 13 7347 and demonstrated the creation of media and installation on a new SSD:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

  Since you are using use Alienware Alienware Respawn. Alienware respawn is very similar to Dell backup and restore.

• Installed new HARD drive with the new installation of XP, old HDD ShowAs saw as the active partition, how to change this?

  I installed a new HARD drive with a new installation of Windows XP Edition family. I want to keep the old HDD and reformat the drive, but I can't because the second HDD is listed as active in the management of the computer. Why? It's not the drive that contains the operating system (Windows XP) that is initialized from.  I put the BIOS such that the new HARD drive is the boot drive. The old HDD has Windows XP on it, but isn't the startup disk. I just don't understand.
  If only the new HARD drive is installed, the computer management doesn't show that it or any other of its partitions are the active partition (C drive is listed as the system partition, of course).

  How can I get an active partition and no active partition when the new HARD drive is installed on a HARD drive that is not the boot drive, when I have two hard drives installed?

  In case it is necessary, the new HARD drive is a SATA and the old HARD drive is IDE with the cavaliers as a slave.

  The system partition is the Active partition. The system volume contains the system files needed to start Windows, Windows XP, these system files are:

  NTLDR
  Boot.ini
  NTDETECT.COM
  Ntbootdd.sys (present/used only with older SCSI controllers)

  Windows files are not necessarily on the system volume, they can reside on another volume, when on a different volume this volume holding Windows files is called the boot volume.

  When you install Windows on a computer, playing a mixture of IDE and SATA setup discs tends to favor with IDE drives on SATA drives and tends to use the IDE drive to house the system partition, (even if Windows is installed on a different drive).

  Running the command SYSTEM SET at a command prompt may shed some light on the problem...

  John

• Hard drive has been corrupted and replaced it with the new hard drive but couldn't get the windows genuine back 8

  Original title: recovery of original windows 8

  When I bought the new device, it was loaded with windows 8 but a few days before my hard drive has been corrupted and replaced it with the new hard drive but could not get the real Windows back 8.

  Please help me to get my windows genuine 8 back so I could get additional updates downloaded.

  Hello Vishal,

  Welcome to the Microsoft community. I appreciate your efforts to resolve the issue. I will certainly help you with the problem you are experiencing.

  If you purchased a computer with installed OEM Windows 8 on it, there could be a sticker on the Tower, or in the back (in the case of a laptop) with the product key to this topic. If there is no sticker, he can be preinstalled on your system BIOS.

  See the suggestions posted by Andre Da Costa replied on March 7, 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/how-to-get-Windows-8-product-key-in-preloaded/ea0e53ae-3506-4ba2-a092-f266ece7072f?auth=1

  In addition to this, see:

  Product key lost or misplaced (certificate of authenticity) for Windows

  If the problem persists, you can contact the manufacturer of the hardware for the same thing and check.

  Hope this information was useful.