Installing drivers for HP M1319f on Windows 7 Pro 64 bit

I upgraded a client to a new office of HP with Windows 7 Pro 64 bit OS. She has a HP Laserjet M1319f connected via USB. When I download and run from the driver download site on HP or download, save, and make the installation of the C drive, it gets to the point says "Adding printer drivers" and it crashes at two or four bars, so I have to kill it in the Task Manager. I tried to install it with the printer unplugged and got the same result. Windows OS printer drivers work fine.  What's up with the HP driver installation?

Hi dpgerhardt,

  1. Open my computer
  2. Navigate to the location of C:\Program Files (x 86) \HP\HP LaserJet M1319 MFP Series\Scan To and then create a shortcut on your desktop for hppscan0.exe

Tags: HP Printers

Similar Questions

  • BIOS 4.03 for workstation xw9400 running windows 7 pro 64-bit

    None does not know where and how can I update the bios on a running windows 7 pro 64-bit xw9400 (HP does not list in the drivers section?) currantly only got bios V3.13 and im sure it should be on atleast v4.03?

    see you soon

    Oh well all good now, worked to followed her the road to iso cd and managed to update the bios to version 4.03.

    Once again thanks for the support...

    Concerning
    Chardsky...

  • Cannot install microsoft visual C++ 2005 on windows 8 pro 64-bit

    Hello to you all,.

    I recently updated my computer to windows 8 Pro 64-bit and today I had to install Matlab as I need it for my work.

    The first step in the Matlab installation process is about installing Microsoft Visual C++ 2005 Redistributable, but the progress of the installation stops with the bar very near the end. The progress bar stops moving (but continues to work the animation on this) and it is just there for something like 10 seconds, but there also two or three minutes. Then the installation window closes without any error or confirmation that the installation was successful. In the control panel appears an entry "Microsoft visual c ++ 2005" but it is, in fact, does not work. Installation of Matlab does not and if I start it again it's the same thing again.

    I tried to install C++ by Microsoft Web site directly, but the same problem occurs, and more no error report is given.

    any idea?

    Thank you very much

    Filippo

    P. S.

    Installation of a later version as the C++ 2010 or 2012 works very well, but Matlab seems very stubborn on the installation of the 2005 version...

    I have did this after 2.5 hours of web searching and try and - in case of failure.

    In the end I found a similar position here on the community where a 'fix it' program was proposed, a fact to solve the problems of installation/uninstallation. I don't have the page open more, but I'll post again here when I find.

    It should be noted, however, that the 'fix it' program did not find any problem on my machine, and he says that nothing has changed, but then I restarted the computer and ran the Setup again and this time it worked.

    At the end of the day, I don't know how this problem has been solved, it surely wasn't the reboot only as I restarted several times during the 2 hours that I've been sitting here, but nevertheless, it seems to be ok now.

  • Maximum supported size of HARD drive for HP Elitebook 8440p Windows 7 Pro 64 bit runing

    Hello, I just bought a HP Elitebook 8440p "off lease" of Tigerdirect and seeks to upgrade the two memory (from 4 GB to 8 GB) and put in the eligible of the biggest HARD drive I can. Either a 512 GB SSD or a 1 TB WD hybrid WD BLACK2 (1 TB HDD / 120 GB SSD Combo drive in a single package!). I would like to see more large disk addressable by using Windows 7 Pro 64 Bit OS since I don't seem able to find this info on the web. HP offers only only a 256 GB SSD in its specifications. but I didn't know if it was do limitations of BIOS or availability at the time of production, even for the HARD drive to 512 GB.

    Also, I would like to know if 9.5 mm compliant Bay that it needs to be for the WD drive. Can't find that either, and while the new laptop has not yet happen, all measure exactly the same way regarding what works and what simply cannot be "cheated".

    Thank you for taking the time to read this and NO information to that effect would be Greatl appreciated!

    Essentially the reason why you do not have a maximum size of hard drive is because there is not everything. Between SATA and 64-bit OS', worrying about maximum size of hard drive is a thing of the past. Are the biggest readers found in the manual, as you suspected him, just a function of the market at the time of manufacture. It was a few years ago now, it is so understandable that the offerings were "at the time" more thin than now.

    Here is the Service Manual:

    Manual

    Page 4-9 shows the procedure of the Bay and the replacement of the hard disk. The Bay is made for a 9.5 mm thickness 2.5-inch wide SATA hard but the new 7 mm readers also works. The black hybrid drive requires some software (included in the package) to treat the two drives in Windows and I read a modest amount of disappointment in the documentation about them. If you can afford the 512 GB SSD go in this direction and you will not be sorry. I use a Samsung 840 Evo and it has worked perfectly for me for almost 2 years and the most recent 850 I hear is even better.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Cannot install drivers for Deskjet 3650 in Windows 7 XP

    I have a HP Deskjet 3650 which is connected through the USB port on my primary computer running Windows 7.  I can print without problem, I have problems sharing this printer with 2 other computers running Windows XP.  I downloaded the drivers for XP and excerpts on the Windows 7 computer.

    On the properties of the printer HP Deskjet 3600 series, I clicked on the sharing tab.

    Share this printer and rendering of printing on client computers are both checked.

    When I click on additional drivers, only X 64 is checked and said yes less installed.

    The two other options (Itanium and x 86) are both unchecked and say no less installed.

    I tried x 86 control and clicking on OK.  Then I am asked to install print drivers and browse to where are printer drivers.  I navigate to the 3600, enu, pilots, win2k_xp folder and see hpf3600k.inf when I click Open, then select OK, I get a selected printer driver not found error that indicates the specified location does not contain the driver for hp deskjet 3600 series (BOBO) on the architecture of processor required.

    On one of the XP machines, I installed the printer software and am not able to print if I physically plug the printer on it.

    On another XP machine, I have installed the printer software, but I download and extract the drivers.  When I click on the Add Printer Wizard and select the printer on the network, it tells me that I'm about to connect to a printer on the computer Windows 7 and says that it will automatically install a print on my machine driver.  I click Yes to allow him to continue and he told me that the server for the hp deskjet 3600 printer doesn't have the installed printer driver and I can click OK to search for the correct driver.  I click OK and navigate to the folder I extracted the drivers to and see that hpf3600k.inf is located in the folder and click OK and I get a window of driver error install that says that Windows cannot locate a suitable printer driver.  To help locate and install a suitable driver, contact your administrator.

    So, it seems to me that the driver that I downloaded on the site of hp for Windows XP is not the correct driver, am I wrong here?

    How can I get this printer to print on all 3 computers work without having to move from one to the other.  The printer must be physically connected to the Windows 7 computer, as the other 2 are in children's rooms.

    Try the following: on the machine XP go to the printers and Faxes folder, add a local printer, printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the shared computer and printer), OK, and then click disk and point to the directory where you unzipped the driver XP.

    On the XP machine, you have already installed the driver do the following: go to the printers and Faxes folder, right click on the Deskjet 3650, select Properties, Ports, the port, Local port Add, new Port, \\Computername\Printername (use the name of the shared computer and printer), OK.

  • Cannot install drivers for HD Audio win 7 64 Pro Windows default for generic HD driver

    Hi all

    I pray that someone can enlighten me as to how to install the correct audio drivers HD in Win 7 Pro instead of generics.

    The motherboard is an Asus Rampage Extreme and the sound card is a PCIe that accompanies the Board of Directors. The manual calls what it a 'card SupremeFX X - Fi' my system is a dual boot with XP on another partition, the sound works fine, XP, with all the extras, I need.

    If I go to Device Manager and remove the existing driver, and then when I try to install the ones I want, I get a message saying ' cannot find a device supported on this machine. "and the installation program quits.

    Of course when I reboot 7 wants to reinstall what he thinks is right. I'm at square one!

    Once the proper drivers are installed, I can then install the Creative Sound Launcher located in the Tools menu. It gives me a graphic equalizer, a Crystallizer and many other controls for the sound card. I can install these items listed, but none of them will any work without the correct driver.
    They have simply open and refuse to work saying "Device supported by this application is not found on this computer."

    I need a way to install the Asus / drivers Creative instead of the 7 seems to think are "correct."

    Nowhere for the MB manual called the card its a 'creative', but it is quite possible that the software package that comes with it has creative name on it in the world.

    A search of the site Creative shows no drivers for a card with the name that I mentioned above.

    Asus forum do not know more so here!

    Thank you all in advance!

    The dual boot is your problem. Why do you always need XP?

    And you're going to have things the wrong way!

    You need specific drivers XP on this partition and specific drivers W7 on that partition.
    See you soon,.
    Jerry

    HI Jerry,

    Thanks for the reply. I don't know how I mislead you with my ad. I said that the sound is FINE under XP it's W7 who "was" that is rampant in me.

    I eventually found the drivers from the Asus site and program utility that controls the different things like the EQ and others. Note that some of them were not in the right directory and I would have never thought to look under the heading where they have resided!

    I use XP because I have so much software that doesn't work on 7. I am also on disability and can't afford to start replacing and material. At the moment the dual boot is a solution very, I see using a virtual machine in W7.

    Problem solved, I had needed was someone to Asus who has understood my dilemma.

    See you soon

    J T

  • Laptop HP 4530 s: wireless network drivers for hp 4530 s windows 7 ultimate 32 bit

    Hi guys,.

    I really need help here. I tried the wireless drivers for my notebook without success.

    I formatted it and loaded with windows 7 ultimate 32 bit, get this off message "WLAN".

    Help, please

    Thank you

    Hello:

    You need this driver for this model of the wireless card:

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060882&swItemId=ob_105197_1&swEnvOid=4053

  • Drivers for laptop MSI using Windows 7 Ultimate 64 bit

    Hello, I buy a variety of this notebook by MSI http://www.msi.com/product/nb/GT70_2PE_Dominator_Pro.html#hero-overview

    It doesn't include any OS so I buy Windows 7 Ultimate 64 bit SP1 to it. The thing is, I'm curious to know where to find the drivers on the computer.

    I found the drivers on MSI Web page, but they seem far too little to make all the http://www.msi.com/support/nb/GT70_2PE_Dominator_Pro.html#down-driver&Win7 64

    Where can I find all the drivers concerned? In addition, should I update the BIOS and the firmware (which can be done on the MSI site)?

    Hello

    Yes, I would setup the last BIOS, chipset drivers and all other drivers relevant to your
    system available to MSI (I always do this on my new systems.) That looks like a complete
    list for embedded devices.

    List of 64-bit Windows 7
    http://www.msi.com/support/NB/GT70_2PE_Dominator_Pro.html#down-driver&Win7 64

    Here are a few other links contact help:

    Support MSI
    http://www.msi.com/index.php?func=service

    MSI - Downloads (drivers and BIOS)
    http://www.msi.com/index.php?func=downloadindex

    MSI - Forums
    http://Forum-en.msi.com/

    MSI - Service
    http://us.msi.com/index.php?func=service

    MSI - Live Update online
    http://www.msi.com/index.php?func=downloadindex

    MSI - Contacts - USA - North America value
    http://www.msi.com/index.php?func=HTML&name=aboutus

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How to install drivers for the installation of Windows 7?

    Hello. Try to upgrade to Windows 7 with a USB key. Is there any where that I can install the drivers? Thank you

    You can use the manufacturer's Web site or an online tool named Driver pack online to install the drivers.

    The link for Driver Pack is here.

    Just select the online installation program.

    It will be useful.

  • Aurora running, but can not be played on Desktop Windows 7 pro 64-bit

    I've been using Aurora for several years with Windows 7 pro 64-bit with the two latest major 28/29 Auroa just missing from my desk after clicking on the icon on the desktop, I tried to uninstall, but the system told me I had still Aroura running uninstall so I had to reboot my PC, I could uninstall I then reinstalled Aurora and a pinned icon appeared in the taskbar, but when I clicked on the icon on the desktop the hourglass turned but no Aroura started on the desktop, so I went through the whole thing again and uninstalled Aurora and installed Firefox V26 and now it has progressed to the last version that has disappeared as exactly the same way.

    What can I do if I use Aroura again because it is very good and safe to use?

    I can't use the troubleshooting info as I can't see Aurora/Firefox to view or copy/paste the info shown.

    Pete

    Thank you solved the problem, I restarted the PC and now Aurora works again thanks.

  • Reinstall Windows 7 Pro 64 bit after failure SSD

    The SSD in my HP laptop is not this weekend. He had installed on it when I bought Windows 7 Pro 64 bit. How can I reinstall the operating system, because I don't have the original OS installation key? Surely I don't have to buy a new OS. In fact, I plan on upgrading Windows 10 once that I get it upward and running.

    At the same time, I remember being able to call a technician at Microsoft, explain the situation and get a new key issued. Is it still possible?

    Dennis...

    Check the product key battery.

    How to: What are my options for Windows 7 reinstall media?

    Make sure you scroll down and read the section:

    What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

    then

    https://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

    If these options are not available, its best you request HP recovery media:

    HP/Compaq

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00810334&LC=en&DLC=en&cc=us&OS=4063&product=4057208

    1-800-474-6836

  • How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

    How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

    XP drivers for XP, NOT of Windows 7...

    Go to control panel > devices and printers > click on "add a printer".

    The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".

    A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.

    Click on 'NEXT' and follow the installation instructions...

  • Re: Satellite C855 - how to install drivers for devices without wireless Internet?

    I had to reset Toshiba C855-1pj my son yesterday.

    Bought a month ago and windows 7 is pre-installed.
    I have upgraded to Windows 8 Pro via a download online.
    I was able to reinstall Windows 8 via USB, but when I turn it on now, it's completely empty of programs and applications.

    I realize that I need to download the device drivers of Windows 8 for the model in question (write this since another laptop), but do not know how to do what the wireless device is not recognized and I am told to connect via ethernet. Is it just a matter of buying a cable and connecting the laptop to router?
    Establishing an ethernet connection will allow me to download the drivers concerned?

    I don't know which driver to download wireless is, like the 4 different options are to come (is it because I'm looking for another computer?)

    Could someone list the hardware specification for the C855-1pj here so I don't know what drivers to download?

    Thanks in advance and sorry for all the questions!

    Hello

    Why you n t use the computer to download the driver WLan and it save on the USB.
    Then connect the USB to the laptop Satellite C855 and install the driver required Wlan. :)

  • Cannot find drivers for hp 14-d008 windows 7 32 bit

    Help me, I can't find drivers for hp 14-d008 windows 7 32 bit.

    Here's my hardware ID

    Ethernet controller

    PCI\VEN_10EC & DEV_8136 & SUBSYS_2191103C & REV_07
    PCI\VEN_10EC & DEV_8136 & SUBSYS_2191103C
    PCI\VEN_10EC & DEV_8136 & CC_020000
    PCI\VEN_10EC & DEV_8136 & CC_0200

    network controller

    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
    PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
    PCI\VEN_168C & DEV_0036 & CC_028000
    PCI\VEN_168C & DEV_0036 & CC_0280

    PCI device

    PCI\VEN_10EC & DEV_5229 & SUBSYS_2191103C & REV_01
    PCI\VEN_10EC & DEV_5229 & SUBSYS_2191103C
    PCI\VEN_10EC & DEV_5229 & CC_FF0000
    PCI\VEN_10EC & DEV_5229 & CC_FF00

    SM bus controller

    PCI\VEN_1022 & DEV_780B & SUBSYS_2191103C & REV_3A
    PCI\VEN_1022 & DEV_780B & SUBSYS_2191103C
    PCI\VEN_1022 & DEV_780B & CC_0C0500
    PCI\VEN_1022 & DEV_780B & CC_0C05

    Serial bus USB

    PCI\VEN_1022 & DEV_7814 & SUBSYS_2191103C & REV_01
    PCI\VEN_1022 & DEV_7814 & SUBSYS_2191103C
    PCI\VEN_1022 & DEV_7814 & CC_0C0330
    PCI\VEN_1022 & DEV_7814 & CC_0C03

    Please help me, its urgency.

    Hello:

    First install the amd chipset drivers and reboot.  You want the first file on the Web page.

    This will install the smbus and usb 3 controllers.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

    Then, install the beta amd radeon catalyst graphics driver.

    http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

    If the amd chipset driver does not install the usb controllers as advertised 3 that he would, and then download and install these two...

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

    Ethernet controller: DL and install the 2nd driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

    network controller:

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_128686_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    PCI device: DL and install driver 1st on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  • Drivers for laserjet 4 on Windows 7 without using Windows update

    I want to install drivers for my Laserjet 4 on my Windows 7 computer.  I saw your instructions and the "windows update" button does not appear on my computer.  It is probably because it is a Government computer and they like to control the updates of windows.  I am an administrator on my machine and logging an admin does not help.  Can you give us just the driver directly?

    Hello:

    Please see my solution to the question in the thread below.

    http://h30434.www3.HP.com/T5/desktop-hardware/HP-LaserJet-4-cant-find-W7-32-driver/m-p/5273747/highlight/true#M103503

Maybe you are looking for

  • Why my iPhone 5 Headphone Jack does not work?

    I tried to fix it but I can't, I'm running on ios 9.3.2 and my Siri does not collect my voice. If you know what is Anseer PLEASE TELL ME!

  • Satellite P300 - 20 H (PSPC8E) - totally gel

    Hi all I bought the above P300 model and I have freezes when I try to stop the laptop (or sometimes when the system is restarted). Is a total freeze which means that nothing does, and I have to disconnect the AC (when no battery in) or hold the power

  • Re: Satellite P870 - how to change the keyboard backlight ON?

    We can see from the Web from Toshiba as Satellite P870 site (and other series like P850, L870, etc.) are NEW backlit keyboard. How to service this backlit? FN - Z does not work. Also, I do not see any symbol associated with this function on the keybo

  • Lenovo Z460 stops frequently

    It started last month when it shutsdown often... I brought to the store where I bought... advised me to buy a new antivirus... then I did... but the problem persists... 5 x, I went to the store to have it checked, but they don't always say theres no

  • EliteBook 8760w: can I put my EliteBook 8760w with an mSATA SSD hard drive using the slot mSATA

    I wonder if it should be possible to use an mSATA SSD by installing it in the slot mSATA? Product number: LG673EA #AK8 (EliteBook 8760w) I inserted an mSATA SSD and it fits, but after booting, the computer gives the following message: No wireless mod