Instant hotspot is a problem for families

Similar Questions

• The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are security protected.

  Access to the BT hotspots.

  The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are protected from security and only the nearest BT hotspot is displayed. There are many others, but they are invisible. I think that there is a software that allows you to see several hot spots the. BT are unable to give me the details.

  This is probably a function of the driver for your wireless card.  I would check with the manufacturer of the computer or adapter.

  Good luck.

• Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.

  Recently upgraded to El Capitan, I had that problem for Mail stop unexpectedly when I saw some posts.  I followed the steps and was able to remove the trouble messages.   Now I can't restore the mail window message viewer component.  When I try to catch the separator bar to go back to the left, only half of the small arrow icon and line appears, and it cannot be moved.   Can open the message by double clicking a message viewer.

  Hi there, alicefrompa!

  Thank you for using communities Support from Apple. From your post, I understand that you do not see the Message Viewer box which allows you to read your e-mails; only see you the Inbox that includes a brief overview of the message and are unable to restore access using the separator bars. I have had this happen to my own Mail app and am happy to let you know how I could fix!

  You are really on the right track - you want to roll your mouse over the divider between the Inbox and sections Message Viewer (which should now be on the extreme right edge of your mail window) and drag it to the left.  When you click on the receipt/Message Viewer box, the cursor turns into a line continuous black with a single arrow pointing to the left. When you see the cursor change, click with the left button of the mouse and (while holding down the mouse button in) drag the combination line / arrow to the left. You may need to drag a little further than before to get it. I had to hang mine almost completely in the middle of my Mail app before the display of the message box appeared.

  From there, you should be able to adjust the boxes to your widths you want as expected.

  If you are still not able to get the display of the messages visible after have try this, here are a few more things that you can do.

  1. Press command + O on your keyboard.
  2. Exit the Mail application, and then press on and hold the SHIFT key on your keyboard while reopening.
  3. Restart your Mac by selecting the menu  Apple in the upper right of your screen restart from the menu drop down.

  See you soon!

• Google Calendar becomes inactive in Firefox. Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.

  Google Calendar becomes inactive in Firefox. Can not navigate, cannot change the appointments, can only view an appointment, then freezes and nothing is more possible.
  Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.
  Firefox 28.0, Windows 7.
  Google Calendar is OK in Android and syncs with my PC OK.
  Works fine in Internet Explorer.
  Please notify.

  The extension Freeven pro is probably the problem. Only that disable and check again.

  If you have the same problem after having disabled the extension pro Freeven then, disable graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  In safe mode hardware, acceleration is disable by default.

  Thank you.

• connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  connection via bluetooth to the laptop problems for laptop.error code 0 x 80070057

  Best regards: John

  Hello

  -Do you have Bluetooth devices internal or external connected to the laptop?
  -Have you checked if all the Bluetooth drivers on two laptops are very well installed?
  -This work was fine before? If so, what are the hardware/software changes made on the computer before this problem started?
  -Is a problem only when these 2 laptops connecting or is that when you try to connect these 2 laptops at any other laptop too?

  I suggest you to go through these below items that could help you to fix this problem.

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices
  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this information helps you!

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Adobe Reader crashes when you try to print to the printer? Why? Any ideas would be great on how to solve this problem for my clients...

  Adobe Reader crashes when you try to print to the printer?  Why?  Any ideas would be great on how to solve this problem for my clients... This seems to be a problem once the latest version of windows update 03/08.  I don't know if it's a real problem Adobe, IE question, question of operating system or printer/printer driver problem.

  Someone please help!  Thank you

  In fact, I have not... However, I have to go change the preferences of Adobe and to take do not open in the Internet Explorer browser and that seems to have solved the problem for now.  However I am still confused about whether it is a matter of IE8 or Adobe 9 and X... Because it's not all my clients with that number only some of them...

• I had this problem for a few days now, everytime I turn on my computer, it immediately goes into recovery.

  OK, so I've had this problem for a few days now, everytime I turn on my computer, it immediately goes into recovery.

  It says: "Please choose an option:

  Start the repair Microsoft Windows environment

  Reinstall Windows

  Advanced options

  "Exit and restart the computer"

  I tried all the options, the demand for my keyboard and language input method, and then he says: "use recovery tools that can help solve the problems of Windows startup. Select an operating system to repair. If your operating system isn't listening, click Load Drivers and then install the drivers for your hard drives. »

  There is no operating system listed and when I click Load Drivers, everything that happens is a folder called "System32".

  There is another option, which is "Restore your computer using a system image you created earlier."

  This does not work either.

  So now the second option has two ways to sort, 'Start Windows System Restore' I tried before and now does not work. There are also "Start Full destructive recovery" which I also tried, but there passed the first hurdle, even if she says it should take 30 to 60 minutes.

  Advanced Options I can't use, because I'm not a user of advanced computing. It offers 3 options, although "Chkdsk", "Notepad" and "Command Prompt".

  Even when I put in the Windows 7 disc, it does nothing.

  This has all started after I had a few problems with the Sims 4 and since I changed my keyboard, but I don't know that could be the problem.

  Hello

  Thank you for the update.

  You can use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)

  • A boot sector

  • A Boot Configuration data (BCD) store

    Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

    
    Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  Let us know the results.

• The application youtube for the ps vita is the source of many problems and all sorts of problems for me

  The application youtube for the ps vita is the source of many problems and all sorts of problems for me... the main issue he won't let me write reviews... Please solve this problem as soon as possible... Please.  I can't take more of this nonsense that youtube app gives me... and it's even for the ps vita... It's very annoying that I can't make comments... it just says: when I try cannot do this action or something... It has * ing me off and many others also. :'(

  Hello David,.

  As much as we would like to help you, our colleagues in Playstation is best placed to help out you. Discover their community at http://community.us.playstation.com/ or visit their Web site to support https://support.us.playstation.com/app/contact_options for more information on contacting them.

• After pressing F2 when I enter setup it resets date August 20, 2009 12:00 am one here it shows also the bios: video bios with a shadow: obscured. What is a problem for me?

  Hello

  I have a dell studio 1558 laptop, core i5, 7(home premium), 64-bit, 4 GB ram operating system windows, I bought it in 2010.Now I get a poblem when starting after each time that I stopped him. It shows a msg for installation or recovery and after pressing F2 when I enter setup it resets date August 20, 2009 12:00 am one here it shows also the bios: video bios with a shadow: obscured. What is a problem for me? and why the date changes it self with the precedent1 every time at startup? How solveb this problem?

  Original title: shady BIOS, video bios with a shadow

  You must reset the default BIOS and change the BIOS utility setup time. In most cases, it will solve this problem.

  More information about the BIOS: http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_148562

  If this does not resolve the problem, I think that the main problem is the battery from motherboard or Ram problem.

  It is best if you go to the Dell service center and tell about this problem.

• New Member has exactly * a * problem for a long time with system! ***

  first of all, I want to say hello to everyone... I just registered today... actually I just discovered today these forums exist even ;^>

  Features: 6 months ago I bought a HP Pavilion a6600f... I love it and have bought things for her from the beginning... find it me easy to use and * beep * hard to turn off ;^> I always check to make sure that I have the latest drivers for everything, cleaning the registry, etc..

  I had exactly * one * problem for the last few months and it's bugging me enough now to do something.

  System details: the bureau a6600f Pavilion has a Pentium dual core E2200 clocked at 2.2 GHz... I put 4 GB of memory in it, and it runs Vista Home Premium w/Service Pack 1 (64-bit).  the rest is probably not important to this question.

  QUESTION: when I opened the health security & in the hp Advisor, I always have yellow exclamation in a triangle "PC Update," and also a exclamation point red in a square under "PC Health".  both are caused by the same problem... the fact that I continue to say there is a new version of the "HP health check' and I need to download/install.

  problem is that I can't do.  Here is what I get.

  at first, everything seems fine.  He considers it, download it (it's about 13 MB), and I get the message 'the active support HP library configure your new installation of the software.  * That's * where the problems begin.  I get:

  «HP Active Support Library error: Error 1316.» "A network error occurred while trying to read him comes from the file C:\windows\installer\HP Library.msi of active support" (note: I checked and I don't even have this file present in C:\windows\installer... that's the problem?)

  then I get "roll back the installation.

  and finally, "error:-1603 Fatal error during installation."  Consult the help of Windows Installer (msi.chm) or MSDN for more information"

  so I can't update the HP health check and I still have these two errors (the yellow triangle and red square) present in HP CAW - PC Health & Security.

  I searched these forums and found a few issues related to the CAW of HP, and I understand that some people even turn off... but it never gave me a problem outside of it, and I want to keep around if I can.

  I'm sorry if this post is on the long side, but I wanted to provide as much information as I could.

  so, my name is Michael King and I hope to be a regular contributor here, and I don' t mind if someone wants to email me, although I understand problems of this kind are better publicly displayed where they benefit from the community as a whole.

  Thank you

  -MK

  Message edited by Michael_King on 05/16/2009 20:06

  first of all, I would like to thank the three of you who tried to help me with this problem.  This means that you, dmhoo29, anon, MrFixIt.  and as a gesture of goodwill, I would like to give Kudos to you, being a new Member and all three.

  you all had great suggestions, and based on these suggestions, I tried a few variations based on these suggestions.  Unfortunately, nothing has worked... She is always back to the same error messages, no matter what I did.

  In fact... HP * own * suggestion... which is essentially reproduced in this thread... does not work either.

  I had already spent hours on this ridiculous thing, and tonight I spent 3 hours on the subject.  I finally solved it, and the solution may benefit others who I see can easily run through a similar problem with other improvements... BECAUSE THE PROBLEM IS A RIDICULOUS OVERSIGHT ON THE PART OF HP that we can correct easily manually.

  THE SOLUTION

  What annoyed me early on, was the fact that I kept getting the message about the "HP Active Support Library.msi" file, which was looking for the installer in C:\Windows\Installer.  It seemed to me that the real problem was that he was looking for a file that simply wasn't there.

  Well, during my hours 3 screwing around with tonight, guess what I found?

  There's a right called "swsetup" subdirectory under the root of the C:\ drive.  and inside C:\swsetup, I found the following two subdirectories:

  C:\swsetup\sp36082 - and -.

  C:\swsetup\sp41377

  I knew of the many, many times I tried update HP Health Check that he was downloading sp41377. (don't remember the extension) via FTP from HP.  so I checked what was in C:\swsetup\sp41377 and guess what I found?  Well, a few things, but the only thing that concerns us is (drum roll please) THE FILE "HP ACTIVE SUPPORT LIBRARY. MSI!

  simply, I opened another window, surfed to C:\Windows\Installer and drag-and - drop "HP Active Support Library.msi" here (I pressed the 'Ctrl' key in order to make a copy of it rather than a civil rights movement).

  so now I had this annoying file in the right directory.  so, since my C:\swsetup\sp41377 window was still open, and since there is a file 'setup.exe' in there, I ran it.

  and the Holy Mother of God, it has actually worked.

  which means that what had happened was, when I tried to update the health check, that would create a subdirectory in C:\swsetup... in this case the C:\swsetup\sp41377 subdirectory... all he needed for the update here... and then ran "setup.exe" dump...

  . . except that the HP person who wrote 'setup.exe' forgot to include an itty-bitty statement in the code...

  to copy 'HP Active Support Library.msi' in the C:\Windows\Installer directory first.

  then pay attention to that sort of thing, my friends... If you try to update this HP wrote and that you get a 'cannot find file such and such in such and such directory' type of error msg, see if you can locate on your hard drive... maybe in C:\swsetup, perhaps elsewhere, I know... and if you find, just manually copy it in the required directory and run Setup again.  This might be the only time where HP committed this Sin right; ^ >... or even once, it cannot!

  Bravo and thank you again to all who have contributed.

  -Michael King

  Message edited by Michael_King on 05/17/2009 23:37

• Uninstall problem for Adobe photoshop CS and image ready CS.

  HI, I'm running windows 7 ultimate problem with the uninstall Adobe Photoshop CS and CS image ready. When I try the uninstall from the Control Panel, it shows that uninstall Adobe Photoshop CS and image ready CS completed successfully. But it has not been uninstalled. After uninstalling, I restart the computer but it always in the programs and features. Please help me.

  You have an installation CD that can run the uninstaller for you?

  Removal of Windows process «»

  Insert the Adobe Photoshop CS2 CD in your computer's CD drive.

  1. start the removal process.

  As with installation, the first window that appears requires you to choose a language for the installer. After you select a language and click OK, the software license agreement appears. Read the software license agreement. If you agree, click on accept. If you click on decline, Setup will stop.

  Click on install Photoshop CS2 in the main installation screen, click on next to the Welcome screen.

  2 disassembly and repair.

  When Photoshop CS2 is already installed, you have the option to repair the current version, which solves any problem that may have the version installed, or you can remove the currently installed version. Click on delete and click Next. »

  Photoshop help / install/uninstall Photoshop CS2
  http://helpx.Adobe.com/Photoshop/KB/install-uninstall-Photoshop-CS2.html

  http://www.Google.com.au/search?q=uninstalling+problem+for+Adobe+Photoshop+CS&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = atJYUJKGJYiwiQfnr4HwDg

• Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

  It sets obtained :-) Sorry for the delay

  Thank you very much! has worked perfectly!

• I dealt with this problem for months. Even hired a comp tech to fix it and still have the same question. There, nobody helping me?

  I dealt with this problem for months.  Even hired a comp tech to fix it and still have the same question.  I had my computer wiped and windows 7 and 8 then reinstalled by a professional.  This all started when I upgraded form 7 to 8.  After 7 to 8 my computer kept getting this error. . kept crashing.  He was supposed to be fixed and it still does the same thing. I was told then move to 8.1.  I have always the same coming error.  I'm not on computer.  IS THERE ANYONE WHO KNOWS HOW TO FIX THIS?  Someone who can explain to me step by step how to fix?  I've tried everything.  Error 0x0000005c [settings 000000000000800 0x000000000000000B x 0 0 x 0000000000000000 0 x 0000000000000000]

  Hello

  The upgrade to 8.1 was perhaps not the best thing to do...

  A lot of people are having problems with it also.

  If it is a desktop computer, have you checked the wall outlet and the plug on the back of the computer?

  Your point about starting the tone certainly as a power or a hard disk problem...

  The problem with you mouse pointer could be related to a feature called quick start...

  Your other problem also, perhaps... Try to turn it off and see if it helps...

  This feature works only when you make a STOP and then start.

  It is not perform a RESTART.

  Turn on or off...

  Go to the control panel... Power options, and then select choose the power what buttons on the left.

  Then select change settings that are currently unavailable near the top center of the screen...

  Lower on the window, uncheck the quick start.

• Mac OS 10.6.8 - Photoshop CS5.1 after years of perfect use, suddenly I'm unable to select a layer by clicking on the image and select it in the layers palette.  Solve this problem for me and I'll buy you a new car.  With our thanks, David Heidelberge

  Mac OS 10.6.8 - Photoshop CS5.1

  After years of perfect use, suddenly I can't select a layer by clicking on the image and select it in the layers palette.

  Solve this problem for me and I'll buy you a new car.

  With our thanks, David Heidelberger

  Hi David

  Have you checked your settings to automatic selection in the upper left of the workspace?