InStr.lib missing after installing LabVIEW

Similar Questions

• Windows 7 takes 15 min to start after installing Labview 2012

  Hello

  I need help on this, is this a bug?

  The problem is that on my laptop after installing Labview 2012, it takes about 15 minutes to start, this happens every time a restart or start my laptop.

  At first I thought something with my laptop, but then my colleague also installed Labview 2012 on his laptop and has exactly the same problem, the difference is that his new laptop and is running windows 7 Professional 64-bit, mine is older and is currently running windows 7 32-bit professional.

  I tried to disable the services NOR, but has not solved the problem, but when I disable all windows services that start at startup, the startup is fast.

  Also note that I had Labview 2011 installed before and I didn't have this problem before.

  Tried also to find something in the registry, but nothing.

  Any who have this problem, or a solution to this?

  Thanks in advance

  This problem seems to be resolved, but then he come back again a few days later

  I did many tests in my laptop and found it to be in the "Service of Network Store Interface" service (INS). Disabling this service, you have your problem solved, but there is another problem, you lose the network.
  This happens because the "DHCP Client" service depends on the national statistical institutes.

  Also, this issue seems to occur only when the PC is in a domain and I'm in a windows server (Windows SBS2008) domain.

  Then I found that if you set manual this services which depend on national institutes of statistics (DHCP Client, DNS Client, IP Helper, network connections, local awareness network) and also put INS manual
  You must also disable the "Workstation" service that also depends on national institutes of statistics (why turn off? Because there are 3 services that depend on the workstation service, they will require to start, and then it will force NSIS to start, then long boot, if you really need of the dependent services on workstation, do the same as for them)
  Not also need uncheck this services in msconfig window if they are checked, and then the PC will boot normally without a network.

  When you start, you should go to services and start the DHCP Client for the network (and the other if you really need)
  This will force also NSIS to start and other services that depend on the national statistical institutes.
  The first time the PC restarts, you may need to reset these services to manual in the services window, I had to do, and then in sebsequent boots, they have been already set to manual
  If you leave right on the dependent services in automatic or automatic (delayed start) it will force NSIS to run and start time will go to + - 15 min

  Because you must manually start "DHCP Client" for the network, here's a solution to do it automatically after have connected you:
  1 - Go to control panel, and then open administrative tools
  Task 2-open Scheduller
  3. on the right click "Creat fundamental task.
  4. in the first window give a name ("DHCP" for example) and press next
  5 - Click on "When I Logon" and press next
  6 - click on "Start a program", and then press next
  7. in the "program/script" insert: net
  8. in the "Arguments" insert: start "DHCP Client".
  9 - Press 'Finish' and you're done

• Tiara 9 crashes after installing LabView 8.6

  Hello

  I'm looking for a solution a problem occurred on tiara 9.0 after installing LabView 8.6.

  The software worked fine until I installed LabView. Since that time it crashes after a few seconds I already uninstalled and installed again, no progress...

  Anyone know what is the problem and how to fix it?

  Thanks in advance,

  Kind regards

  Paul

  Hello Paul,

  I have a DLL I can share with you what might solve this problem. Please contact me by e-mail: Forget DOT otmar NOR DOT comand, I'll send it to you.

  Best rgards,

• 4540 proBook s: unknown device missing after installing windows driver 8

  My laptop is a Probook s 4540

  I installed Windows 7 to windows 8.1 and everything went well. Now after installing all the drivers updated for my particular laptop, I have a unknown device in my device manager.

  The hardware Id are:

  ACPI\VEN_HPQ & DEV_6000
  ACPI\HPQ6000
  * HPQ6000

  I don't know what it is or a driver for it.

  No matter who else knows it or know what this device and where I can get a driver for it.

  Thank you

  Hello

  Should be HP 3D DriveGuard 5 on the following link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229456&swItemId=ob_124200_1&swEnvOid=4158

  Kind regards

  DP - K

• problem with MAX after installing LABVIEW 10

  Hello everyone, I have a serious problem I installed labview 10 yesterday on 2 laptops, one of them works perfectly, however, the other gave me a two erros

  1.http://digital.ni.com/public.nsf/allkb/6CA56E2DDBCCA06086257591006141EE

  2. http://digital.ni.com/public.nsf/allkb/F24AA9FB6A3A0E9D86257539006141BE

  I tried the solutions above in the link, but it was all futile. can someone please suggest me what would be the problem? I had already LV8.0 on the laptop which is the cause of the problem. I tried to re - install the disk driver given

  for me by NEITHER, but no luck.

  When I started the laptop for the 1st time, there was a mistake in saying DOS command prompt: DATABASE ERROR and I cancelled the error!

  In addition, Labview works fine, its only MAX who has problems. is there a way I can only MAX to uninstall and reinstall? Please help me...

  Thank you

  Sorry CrackJack

  Try this one http://digital.ni.com/public.nsf/allkb/86256F0E001DA9FF86256FFD005B827C?OpenDocument    

• Disc Association file missing after installing windows 7 SP1,.

  After installing windows 7 SP1, trying to open the drives C, D, F, I get error message cannot open, lack assocition file, can someone tell me how to solve this

  Restore the Type Associations by default Windows 7 file Extension:
  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Change the programs that Windows uses by default:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• files missing after installing updates

  I updated one of the pc to my work and downloaded updates. After restarting the pc installed updates, about 32. After installing many important issues seemed to lack, including the application of drop box. We have a server to the installation that this PC is connected to. would it be possible that the erasure of files updates, but they are stored on the server?

  Hi Clint,.

  Thank you for your response.

  As I informaned you in the previous answer, I would season you post your question on the TechNet Forums as the issue related to the field.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

  I hope this helps.

• No option to simulate the peripheral cRIO after installing Labview and RT/FPGA Modules of downloads (lack of driver support?)

  Hi guys -.

  Basically, I need to simulate a cRIO device without yet having equipment on-site, like this:

  How to simulate the FPGA hardware target using with LabVIEW Project Explorer

  Instead, I only get the options presented in the attachment "Add Target Options.jpg.  I guess it's because of missing drivers, which I assume is due to an error that I made during a recent new LV installation installation went like this: I downloaded (not diskettes) and installed the following (in this order, the latest versions all around):

  (1) LabView development system

  (2) real-time module

  (3) FPGA module

  (4) NEITHER-RIO (previous installation-by-installation)

  (5) DAQmx

  At the end of (1) and (2), I got the screen shown in the second attachment ("Drivers Installer Message.jpg"), but could not able to recognize the folder "device drivers OR" (I also downloaded), or one of its subfolders.

  According to me, I'm missing an obvious option to load the necessary drivers after installation, but can't seem to find reference to it in the forums.  Could someone give me a little help in the right direction?

  Thanks a lot and have a nice day.

  
  

• XZ029UA #ABA: missing after installing windows device driver 7

  Hello

  I installed windows 7 on my HP dv7-4285dx.

  The wireless network connection does not work.

  The following devices under 'Other devices' indicates that the drivers are not installed:

  1 Intel Centrino Advanced-N + WiMAX 6250

  Hardware ID:

  USB\VID_8086 & PID_0187 & REV_0000

  USB\VID_8086 & PID_0187

  2. network controller

  Hardware ID:

  PCI\VEN_8086 & DEV_0089 & SUBSYS_13118086 & REV_57

  PCI\VEN_8086 & DEV_0089 & SUBSYS_13118086

  PCI\VEN_8086 & DEV_0089 & CC_028000

  PCI\VEN_8086 & DEV_0089 & CC_0280

  3 PCI Simple Communications Controller

  Hardware ID:

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_163D103C & REV_06

  PCI\VEN_8086 & DEV_3B64 & SUBSYS_163D103C

  PCI\VEN_8086 & DEV_3B64 & CC_078000

  PCI\VEN_8086 & DEV_3B64 & CC_0780

  4 unknown Device

  Hardware ID:

  USB\VID_138A & PID_0005 & REV_0 < 90

  USB\VID_138A & PID_0005

  4 unknown Device

  Hardware ID:

  ACPI\HPQ0004

  * HPQ0004

  Could you please share links for the above drivers?

  Thank you

  FADD

  Hello

  Please download and install #3 first, then restart. After that, install 1,2,4 and 5.

  1 and 2: article 6 of the following link:
  https://Downloadcenter.Intel.com/SearchResult.aspx?lang= & ProductID = 3199 & ProdId = 3199
  
  3:  Intel Management Engine Interface (MEI) driver
  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng & DownloadType = drivers & Keyword = Intel + Management + Engine
  
  4. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us & lc = on & softwareitem = ob-105093-1
  
  5. HP 3D DriveGuard Software:
  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

  Kind regards.

• Satellite A100-912 (PSAA9E) a device is missing after installing Vista

  Dear,

  I recently received a Satellite A100 - 912 (PSAA9E). Windows XP Home was preinstalled operating system. But when I installed Vista Ultimate, the Device Manager shows that a device is missing pilot. Its properties show that it is located on PCI, device 6 7 Bus and function 3.

  I downloaded the drivers all listed for the toshiba site system. So, can someone tell me what device it is and where I can find the driver for it? All devices such as the display, sound, modem, lan/wlan, player card, fingerprint reader, buttons of media multi burner Super multi and touch to touch work well.

  Hey Buddy,

  I Don t really know what device it is, but you can for example try a linux live cd. The live cd lists you start a list of pci devices so you can find that materials are in your machine.

  Alternatively, you can perform a search in google for 'list of pci Vista' and you might find some pci list of tools that can help you get information about unknown material thjat.

  Welcome them

• Software of HP missing after installing Windows 7

  I have a HP Pavilion dv7-1245dx which had Vista 64 bit OS installed.  When I upgraded to Windows 7 64 bit OS I ended up having to do a clean installation of the operating system due to errors during the upgrade process.  Now it works correctly but I have no HP software other than the one displayed for Windows 7, I downloaded.  How can I get other software?  When I boot from the recovery cd or partition of disk option is to recover the original operating system I don't want to do.  How can I get the software because I don't have the HP recovery software more on my c drive?

  Thanks, I have now received all these.  The only thing that miss me is the HP Recovery Manager, where can I get it?

• Beats Audio Control Panel missing after installing windows 8

  Hello
  I have HP h9 - 1185 at the office and I have recently installed windows 8 on it after removing Windows 7 and HP Beats Audio Control Panel is absent since then. How can I get that back?

  Hello

  Download and install the IDT HD Audio driver from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59424.exe

  When the installation is complete, restart the computer.

  Kind regards

  DP - K

• Acrobat 9 Pro missing after installing CS6

  Installed Acrobat Pro 9 (full version) on Win7 64 bit pc ago about a month everything was working well. Then I installed CS3 last week, everything works still fine. So yesterday I installed CS6 and now my pdf is opened with Acrobat reader. So I went to associate Pro 9 to open my pdf files and Pro 9 is missing.

  I looked on the hard drive and done searches for the executable and the only thing I can find is this folder C:\Program Files (x 86) \Adobe\Acrobat 9.0, but it does not contain an exe file. All I see in this directory is two files, a "Acrobat" with plug in folders and a javascript file and the other is a resources folder with files of police and the card inside.

  So the question is re - install Pro 9 at this point?

  Thanks for your help.

  AA 9 is automatically uninstalled with CS6, I recall. There may be an option to not uninstall, but most people rush through the Setup process and do read these details and which can happen for you. In any case, you probably need to reinstall AA 9.

• Satellite Pro 4600 Sound missing after installing Windows 98SE

  I have installed Windows 98SE on my 4600 whose specifications are:
  Model PS460A-04163
  P850 14TX 128M 20 ML DVD

  I have no sound at all and all the sound options are grayed out. I have downloaded a driver from Toshiba (Yamaha AC - XG?), but it wasn't correct. Can someone point me in the right direction for the correct audio driver. I'm also not sure what "series" falls under this model. Thanks for your help. 7.

  Hello

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=84983

  you will find the link to the page of the Toshiba driver where you can download a driver for this device.

  Good luck

• Beats audio software missing after installing windows 8.1

  Hi all!

  I have a problem I would like help with. I just upgraded to windows 8 to 8.1, but now the beats audio/software interface is missing, and I can't get it back. What should I do? I have a HP ENVY m6-k088ca Sleekbook.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61792.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, turn off the phone by holding down the SHIFT key when you click on close to temporarily prevent a "boot hybrid.  Then disconnect the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click set as default.

  Restart the computer again, then check if the Beats audio Panel is now listed in the control panel.

  Kind regards

  DP - K