Instructions for the replacement of 1 TB of HDD with Samsung EVO 1 TB SSD in XPS 15

Similar Questions

• Settings of VoIp for the replacement of a Cisco 3550 button with a SF300 - 24 p

  I add the SF300 - 24 p to an existing set of switches.  My spine is a 3560.

  The 3550 I'm replacing has this config for each port that supports a Shoretel phone

  switchport trunk encapsulation dot1q

  switchport mode trunk

  MLS qos trust dscp

  include global parameters

  pvst mode Spaning tree

  spanning tree extend id-system

  VLAN spanning tree 1 200 priority 28762

  internal allocation policy of VLAN ascendant

  all other settings are default

  Any ideas how to reproduce it on this new switch?  I added the Shoretel mac address range (00-10-49) in phone YES program.  The phone is supplied with power, I think he gets a 192.168.6.x address (local subnet), but then he should get a 10.6.0.xx on his IP VLAN - but it doesn't.

  Some configs of the spine are attached.  I don't have to configure it in the 3550.

  Any ideas?

  Fred

  Hi fred,.

  Backup on my PC should be the same as the screenshot taken on my SG300 - 28 p as shown below.

  

  try to use wordpad to adjust settings and then upload the configuration to a new machine.

  Let me know how it works. I don't really have multiples of the same switch to try it.

  Best regards, Dave

• SAT S1800-614: need for education for the replacement DVD-Rom

  Hello

  can someone tell me if there are the replacement instructions on the net for the replacement of the parts for computers laptop toshiba? And where can I find them?

  Or can someone tell me how to replace the DVD - Rom drive in a Satellite S1800-614?

  Thanks in advance,

  hubertusbee

  Hello

  I put t think that you find on the Web from Toshiba sites instructions how to fix a laptop or readers. ASP (certified partner) is responsible for the replacement or repair equipment. In this case, you can ask for opinion or statement ASP.

  Good bye

• question of northbridge nw8440, looking for the replacement of good mobo

  Hello
  I'm my nw8440 mobile workstation (T7400, FireGL V5200, 15.4 "WUXGA) seems to have some problems of northbridge and I'm looking for the replacement of the mobo.

  I can read "Maintenance and service guide" he shares the same mobo (SPS-416397-001) with nc8430 and nx8420. But is it really the same thing? Because my nw8440 is equipped with a welded gpu FireGL V5200 those others have rather a X 1600.

  Thank you

  Mac.

  http://www.eBay.com/ITM/grade-A-HP-Compaq-NW8440-motherboard-Assembly-ATI-416397-001-242A-/151323954802?PT=motherboards&hash=item233b9c4e72

  REO

• I have a HP Photomart 5520 printer and I need a book of instruction for the CopyOption parameters

  I bought my first computer at the age of 81 years five months ago.  The provided installation manual

  with the printer has not all the instructions for the different parameters of CopyOption.

  I was wondering if there was instructions that could be sent by post or by e-mail to me?

  Norman Pencille

  [edited by Moderator]

  Hello norman - 99,.

  Welcome to the Forums of HP Support! Congratulations on your first computer, which should be exciting and scary at the same time!

  I see that you are interested in a guide to all the different copy settings and options for your Photosmart HP 5520, there is a User Guide that has information about the copy feature, you will find that here: HP Photosmart 5520 series User Guide on pages 21-24. I know you are probably looking for more information, although not available in the manual, I took the lead and went through the front for you and made a list for you, you'll find it attached (at the bottom of this post) in this way you can keep it for future reference.

  I hope this has been helpful, please let me know if you need more help.

  Thank you

• What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  What are you doing for the era code 80151012. I spoke with Xbox live support could not fix it.

  Hi, Jason.

  the only way to fix this is to talk to xbox support, if they suggest you to do something you have already been told and they will suggest something else.

  phone numbers:

  * In the United States, to the Canada or Puerto Rico: 1-800-469-9269 or 1-800-4MY-XBOX

  See also this forum account issues:

  forums.Xbox.com/.../12.aspx

  Have you tried using another browser?  Google Chrome, Firefox?

  Contact for chat

  http://support.Xbox.com/en-us/contact-us?XR=footnav

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• "Can not open AsIO.sys (2)" I get this message when I log in after a reboot. I have search for the file, but can't find it with the research or the command prompt. What do do in this file, and can be created and put into the appropriate folder?

  "Can not open AsIO.sys (2)" I get this message when I log in after a reboot.  I have search for the file, but can't find it with the research or the command prompt.  What do do in this file, and can be created and put into the appropriate folder?

  Hi Jack,

  This driver belongs to AsIO.sys Asus Probe. Try to uninstall Asus Probe and if you need, install again. If this does not help, uninstall Asus Probe and other tools of control such as Speedfan. Open the registry (regedit.exe) editor and search for AsIO.sys and remove all the entries that you can find.

  André
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black

  When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black and stays black even after a reboot. I turn it off to go back to my office. nothing will be displayed, but the screen is powered.

  When I update my driver for the card ATI Mobility Radeon HD 3650 with live update my screen goes black and stays black even after a reboot. I turn it off to go back to my office. nothing will be displayed, but the screen is powered.

  Hello

  When you say "live update" are you talking about Windows Update?

  If so, you can go to the ATI site and download the latest driver for this video card. Here are the download links for the drivers later, Windows 7, 9.9 32-bit and 64-bit version for the Mobility Radeon 3000 series.

  ATI Catalyst Mobility Radeon Display Driver 32-Bit

  ATI Catalyst Mobility Radeon Display Driver 64 bit

  Hope this helps

  Thank you for using Windows 7 Ronnie Vernon MVP

• Hello, I've just updated my Photoshop for the most recent version, Im having problems with flow tool, is - that someone is having this problem too?

  Hello, I've just updated my Photoshop for the most recent version, Im having problems with flow tool, is - that someone is having this problem too?

  Hi tonyc75479545,

  Greetings.

  Please check this thread - Photoshop CC 2015.1 liquefy lightens the result on the 16-bit per channel images

  Concerning

  Rohit

• are the same instructions for the migration of outlook 2003 data as they are in your instructions for outlook 2007

  The site gives instructions for mobile information e-mail from Outlook 2007 to Thunderbird, are these instructions applicable to Outlook 2003? In other words the instructions will work on Outlook 2003, that I have, or are there different instructions to move the contents of Outlook 2003 to Thunderbird?

  All versions of Outlook import in Thunderbird the same way.

  They need for Outlook must be installed and only the PST files in the default outlook defined and loaded in Outlook will be imported.

• I followed the exact instructions for the installation of the latest version and still when I open I'm always told that I don't have the latest version. I did it 10 times.

  I support the latest hanging out in applications and then toward the dock saying replace the old version and when I open Firefox, the next time it says that I have the old version.
  I dragged the old version in my trash, but he returns. Please notify.

  Do you not see that the message on the site www.google.com/firefox

  The site www.google.com/firefox has been used in versions of Firefox 3 for the home page.
  
  The current versions of Firefox 4 + is no longer use this website from Google as home page, but use the build-in on: home page as the home page.
  
  Google is no longer seems to keep this page and assumed that you are using an older version of Firefox, if you visit again you and this site warns that you are using an older version of Firefox and invites you to update.
  
  You can ignore this message if you are running the latest version of Firefox, as shown in the window "help > About" (Firefox is updated).
  
  You can use a different page than the homepage as subject: House or www.google.com or www.google.com/ig (iGoogle).

• Tips for the replacement of DVD burners on Tecra series

  I think I need to replace my DVD burner. I used a carpet * a UJ-811 t came with the laptop, but it is no longer Burns correctly, although he continues to play well. Initially, I thought it was a problem with Nero (calibration error), but it doesn't matter what burning program I use. I spent a weekend through various forums looking for a solution: I ran a lens clean and updated drivers, looked for the firmware updates (nobody seems to be able to find for the carpet *, including on the Firmware Page), tried the brands of different media (although I initially using Sony and TDK in any case). All with no luck. So I think that he has reached the stage that I need to replace the burner itself.

  So, advice on brands and type? I want something that is internal and easy self-installation. I would like to also buy online and get fast shipping (I'm leaving Ireland in about a month) so also website suggestions welcome. Please keep your relatively simple tips; I am a relative novice who learns quickly.

  Thanks in advance.

  Hello

  It's a shame! It of always frustrating when the player no longer works!
  But there is not much to do! You said that the calibration error message appears.
  Well, it seems that the drive cannot calibrate the lens correctly and this leads to problems of engraving!
  As you already assumed the replacement drive is required!

  Usually, the user that was preinstalled on your laptop manual should provide some compatible readers and supported!
  Check it! My user manual contains this info!

  But if you don t find anything, I recommend you contact the ASP in your country for the disk drive!
  You should know that not all readers are compatible because of the master/slave/c-salt settings.
  If the drive supports bad settings of the BIOS does not correctly recognize this device!

  So, make a call to the service provider and ask for more details! Good luck

• What kind of card do need me for the replacement of mini

  Hi - First of all some context.   My husband has dementia and the only thing he can still do is some art works and send them to friends and surf the internet.   He spent hours on his old Mac Mini up to last week, when the hard drive is dead.  I took it to the Genius Bar and they said it was really dead.   The good news is that we have Time Machine and Time Capsule backup and my step son has sent us one of her old Mini as a replacement.  The problem is that the port for the monitor is totally different.  The monitor is an apple screen, but it does not replace Mini

  So I'm a bit confused as this kind of cards that I need to do all work.   Attached are some pictures of my problem:

  1 is the oldest mini back showing the port on which we used on it to connect the screen

  2 is the replacement sent by the son-in-law mini.   Display port is circled.   This is what it takes to go in.
  3. is the wire at the back of the Apple screen we have.   It is an older display.   He has three sons (one is a USB cable that we never used) the wire we used is circled.  I don't know what about the other wire.

  4 is a bulk of the wire have been used and the other wire of mystery.

  Can someone help me understand what I should buy?  Thank you!

  

  

  If I am accurate, your Mac Mini replacement is older than your previous Mac Mini; so, you will need to buy an older cable/adapter to connect to the computer with your screen. I don't know the model number of your monitor, but on the side of the computer, there must be a kind of "DVI". (Not Mini DisplayPort, Micro-DVI, or Mini-DVI)

• Instructions for the removal and reinstallation of .NET Framework on windows xp 32-bit

  I need full instructions with links of web page to remove all versions of net and then put it back.  I have a copy of an e-mail that has it all, but I don't know how to get my copy in a document where I can use the web links.

  You must may (or may not) .NET Framework 1.1.

  Of http://blogs.msdn.com/b/astebner/archive/2009/04/20/9557946.aspx

  Most of the applications that have been created for the .NET Framework 1.0 or 1.1 will automatically use the .NET Framework 2.0 instead if it is installed on the system.  In most cases, this means that you do not need to keep the .NET Framework 1.0 or 1.1 is installed on your system if you have already installed .NET Framework 2.0.

  However, there are some applications that are configured to require a specific version of the .NET Framework, even if later versions of the .NET Framework installed.  If you have any application like this on your system and try to run without having to install the .NET Framework 1.0 or 1.1, you will get an error message that resembles the following:

  ---------------------------
  MyApplication.exe - .NET Framework initialization error
  ---------------------------
  To run this application, you first must install one of the following versions of the .NET Framework:
  v1.1.4322
  Contact your application Publisher for instructions about obtaining the appropriate version of the .NET Framework.
  ---------------------------
  Ok
  ---------------------------

  In the above error message, the version number will be v1.0.3705 if you install the .NET Framework 1.0, and it will be v1.1.4322 if you need to install .NET Framework 1.1.

  If you end up seeing error messages like this one, you can re - install the .NET Framework 1.0 or 1.1 in order to fix the errors.  If you end up seeing errors like this, then you don't need to worry about re - install the .NET Framework 1.0 or 1.1.