Instructions keyboard replacement HP ENVY 15 t-j000 quad

Similar Questions

• Replace drive HARD laptop computer HP ENVY 15 t-j000 Quad Edition SSD

  I would buy a HP ENVY 15 t-j000 Quad Edition Notebook PC and HP v300a 120 GB SATA Solid State Drive with Upgrade Kit.

  Now, the SSD has a thickness of 7mm.

  My question is if I can replace the HDD with that SSD? The thickness is the HARD drive Bay in the laptop.

  If it is greater than 7mm from the DSS moves inside?

  Thank you

  Hello

  The old HDD on your machine is a little thicker, but at least 4 screws I do not think that new SSD will circulate in the case. I have actually put new SSD in one of my laptop (not HP) and no problem, BUT I don't move this laptop. If so, blue tac can help.

  Kind regards.

• HP ENVY 15 t-j000 Quad Edition: HP ENVY 15 t-j000 Quad Edition Notebook PC - white screen

  Hello

  I have a HP ENVY 15 t-j000 Quad Edition Notebook PC. Recently I started to notice a problem on my laptop.  I have some...

  Help, please!

  Hey @HPENVY15t-j000,.

  Unfortunately your laptop is not setup for a touch screen. This is a link to your page 27 manual replacement parts.

  I hope this helps.

  Thank you.

• ENVY 15 t-j000 Quad Edition disk hard thickness

  I'm looking to replace the hard drive in my ENVY 15 t-j000 Quad Edition with an SSD. HP site is not currently in the thick of the preinstalled hard drive. I'd rather get an ssd that leaves no extra unused space in the computer. What is the thickness of the hard disk installed in the ENVY 15 t-j000 Quad edition so I can pass to an ssd the same size? Thank you.

  Hello

  It is very safe to use 7mm thick, as mentioned in my first answer.

  Kind regards.

• HP Envy 15 t-j000 Quad Edition: screws fell off the bottom of the HP ENVY

  Hello. Anyone know the size and type of the screws from the bottom of the HP Envy 15 t-j000 Quad Edition ? These are the small screws that hold the bottom cover of the laptop basically. Somehow mine fell and it is causing many problems. The tilt is extremely limited to a specific position. Disturb the position of the laptop while it is will cause a weird vibration because of the fan on the left side.

  If someone could let me know what is size and the type of screws used to lower cover , and where I could find them, I would really appreciate it.

  Thank you

  aquafemi wrote:
  

  I took the screws a few months ago to see if I could fix it something. I didn't want to dirty things too so I just put them back.

  HP Live Kit P/N: 720560-001

  This includes the screws for your laptop.

• HP ENVY 15 t-j000 Quad Edition: 50 + HP driver/software downloads are absent from the CTO Quad HP ENVY 15 t-j000 Product Support page

  What happened to the HP Software and Driver Downloads for my HP ENVY 15 t-j000 Quad Edition CTO Notebook Model # C8P48AV built in July 2013? There were 58 results software and driver for Windows 8.1 64-bit last week when I printed the list last week. Today, I received the following message when I tried my laptop:

  We were able to find the drivers for your product. Pilots may be developing, so please, check back at a later date or visit the product home page.

  How the hell could all disappear? I hope it's temporary! Extremely disappointed with HP support.

  Thank you banhein! Support page for the software and drivers for my model is back! Happy, it was only a temporary problem.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-J000-Quad-Edition-Notebook-PC-series/5387620/model/5388029

• Lack of controller driver PCI Communications Simple - Windows 8 x 64 - HP ENVY 15 t-j000 Quad Edition

  I downloaded and installed all the drivers for my product - HP ENVY 15 t-j000 Quad Edition (E4T17AV) - and it still shows a lack of PCI Simple Communications Controller Driver. Can someone point me in the right direction please?

  Is the hardware ID

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C & REV_04
  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C
  PCI\VEN_8086 & DEV_8C3A & CC_078000
  PCI\VEN_8086 & DEV_8C3A & CC_0780

  Nope.

  That is probably why it is not installing.

  The driver is designed for RAID configurations.

  I know it does not install not in IDE mode, but I wasn't sure of the AHCI mode.

  If you want the latest AHCI driver for your configuration, you can get it directly from Intel on the link below.

  The first file listed.

  Download and unzip it into a folder.  Do the manual update method by going to Device Manager, and then click to expand the IDE ATA/ATAPI controllers category.  Click the listed SATA AHCI controller.  Click on the driver tab, click on put up-to-date driver, reselect the thing browse and navigate to the folder that you extracted the drivers to.

  Make sure that the include subfolders is selected and should install the updated driver.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&Keyword=Intel+Rapid+Storage+Technology+(Intel+RST) & lang = fra

• HP ENVY 15 t-j000 Quad Edition CTO Notebook PC Audio

  I have a HP ENVY 15 t-j000 Quad Edition CTO Notebook PC e ele formatei e coloquei o windows 7 but after that coloquei o windows 7 Beats Audio REALLY works would any sem Solução o ter as voltar o windowws 8

  Try this driver:

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64958.exe

• Updates for HP Envy 15 t-j000 Quad Edition CTO Notebook PC windows 8.1

  I have updated the system and returned to original Windows.

  Them I have updated to 8.1 windows 64-bit. But I can not find several updtaes as Col. simple 64B? and others who still work in 32-bit.

  How can I get updates for HP Envy 15 t-j000 Quad Edition CTO Notebook PC? 64B?

  Windows 64 b 8.1 is not simple pass 64B? Software updates for 8.1 64B?

  Hi @jezhael

  I understand that you have trouble finding drivers and software for your computer now running windows 8.1 (64-bit).

  You can find the drivers Hp custom laptop from this page, just be sure to select WIndows 64 - bit of 8.1.

  Drivers HP ENVY 15 t-j000 Quad Edition CTO Notebook PC

  See the following download SimplePass if necessary:
  HP SimplePass Identity Protection software

• Hiding HP ENVY 15 t-j000 Quad Edition w/SSD and hybrid propulsion system. Swap disk for one SSD Question.

  Hi all!

  I bought the HP ENVY 15 t-j000 Quad Edition and opted for the WSSD 24Go cache as well as the hybrid drive 1 TB. Do I have a problem just buy a kit of cloning and spend the hybrid propulsion system to a full on SSD in the future if I choose to?

  I did some research but I can't isolate an answer if yes or no I might encounter problems on account of the Intel RST be "associated" with the traditional HARD drive caching.

  So I wonder if I can't just simply disable acceleration of RST, clone HARD drive for an SSD via a cloning kit, remove the HARD and the SSD drive and call it a day?

  Any help with this is appreciated!

  Purgingomen wrote:

  Thanks for the info but I was even more so, I was wondering if I would have a problem Exchange with a new SSD hybrid drive later by cloning.

  I thought that I would stick with the 8 GB of RAM and WSSD combo of cache/HDD for now and sometimes down the line (as in a year or two) to get rid of the HARD drive for a full on SSD, disable caching and at the same time move to 16 GB of RAM.

  But I don't know if yes or no the WSSD cache/HDD combo makes it difficult to clone and swap the HARD drive and then just leave the disc of "cache" of 24 gigas (which is more a cache drive) there to be upgraded later.

  -Rob

  Well, I think a pure 2.5 "SSD should work on the system but make sure the cache is removed. For the purposes of cloning, I suggest using the DD command:

  http://en.Wikipedia.org/wiki/DD _ (Unix)

• ENVY 15 t-j000 Quad Edition Type of Ram for upgrade

  I try to add a stick of ram to 8 GB for my ENVY 15 t-j000 Quad Edition. Site HP Web does not list the type/size of ram to find the stick of ram suitable for upgrade. If someone knows this information, it would be a great help. Thank you.

  henry_mb wrote:

  I try to add a stick of ram to 8 GB for my ENVY 15 t-j000 Quad Edition. Site HP Web does not list the type/size of ram to find the stick of ram suitable for upgrade. If someone knows this information, it would be a great help. Thank you.

  Hello

  What is the new portable Haswell? This laptop supports modules SODIMM DDR3 1600 MHz, but take a look what original config is. HP uses memory especially two modules config so if there are already 8GB it will be probably 2 x 4 GB modules. I recommend this one:

  http://www.Amazon.com/Corsair-vengeance-laptop-memory-CMSX8GX3M1A1600C10/DP/B0076W9Q4Q/ref=sr_1_3?s=PC&ie=UTF8&QID=1373665809&SR=1-3&keywords=vengeance+SODIMM

• HP ENVY 17 t-j000 Quad Edition: back to Windows 8 for a clean install of Windows 7

  Hello

  My machine came with windows 8. I created the recovery using HP Recovery Manager and then CLEAN Media installed windows 7. Now, I want to take the ferry for windows 8. USB recovery I created got no .exe file. And on Windows 7 there is no HP Recovery Manager.  What should I do?

  Thank you!

  Hey @Omar92,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in on your HP ENVY 17 t-j000 Notebook and your issues with HP Recovery Manager. If she has deleted this partition completely, you will need to use your recovery CD or USB key you created when you bought your laptop. Here is a link to use the HP Recovery Manager.

  Here is a link that shows you other ways to restore the laptop back to 8.1 for Windows. The selection shows how to use a USB device.

  Hope this helps you.

  Thank you.

• ENVY 17 t-j000: some keys on the keyboard do not work. ENVY 17 t-j000 Quad Edition CTO

  I checked the status of my keyboard in the Device Manager, and it indicates that the keyboard works correctly. I also checked for updates, but it is already up to date. The keyboard has done this before and I sent it back once to fix, but why is - doing this again?

  I decided to buy a USB keyboard and of course, it works fine. As I suspected, the problem is in the built-in keyboard, but unfortunately, my outdated warranty.

• ENVY 15 t-j000 quad edition cto: outputs audio switching does not work in windows 10 birthday when the headset is connected

  Hi guys.

  As you know in 10 anniversary update windows, you can switch between outputs sound when the headphone is plugged directly from the sound icon in the taskbar, but it does not work as it should. If the headset is unplugged then the sound comes from the speakers and they are plugged in when the noise is coming from the headset and I can't select speakers. It shows two devices, but when I select one of them the speakers are selected. Also I tried to playback devices, but still, I can't put the headset as default playback device. She is forced to be like the only communication device. I've updated the audio driver but nothing has not improved. My audio driver is codec IDT high-definition. In addition, I tried the generic driver from the sound of microsoft, which is called "codec high definition audio" and it shows a device like speaker and it doesn't detect any helmet or communication device. So, what's the problem? I am able to use this option of windows 10 birthday or not? If yes how? I need this option because I use a headset a lot and I don't want to plug them each time. Thank you for your attention. I can give additional information if it is needed and I'm hear to help.

  Hi David,

  If you remember, I had problem with the IDT driver after upgrade to windows 10 and other updates. I'll be back to tell you good news. Finally, I solved the problem partially and I'll explain what I did.

  Today, I found that there is some audio drivers in the microsoft catalog site, so I went out there and looked for a codec high definition audio. A list came and saw that there are three tempo IDT Audio driver that are compatible with windows 10. They are all IDT Audio driver version 6.10.6504.0 and they are made in 2015. I downloaded all the drivers of three and tested. The first two of them does not solve my problem but the last which is "Tempo driver update for codec IDT high-definition" made in 08/05/2015 with 13.1 MB did the job. I must mention that you need to install this driver on generic windows sound driver for good results. If you install hp IDT drivers probably do not get good results. After installing this driver now I am able to switch between outputs audio (headphones and loudspeakers). The driver can detect my headset exactly as what it is. He shows me an output until I plug in my headphones and it then adds another exit in the helmet. I put my headphones or internal speakers as default playback device which I couldn't do with other drivers. There are just two problems that does not matter much to me, and I can't ignore them. The first is the light of the button mute on the keyboard does not work with this driver which is not very important, and the second is that there is no Equalization of beats in this driver and instead there is an audio driver IDT, which is very similar to the equalizer, but it beats not affect only the internal speakers the headphones that is more important to me because the sound via the headphones is very clear and good. If there was some ablity to HP to change this driver and add audio beats and allow also the light on the button mute then it would be perfect. The link for this driver is here:

  Driver IDT tempo for windows 10 and put on subsequent day

  Just download the latest driver with 13.1 MB size and enjoy.

• Upgrade Envy 15 t-j000 Quad Edition CTO to widows 8.1 Pro

  I just rebuilt my notebook of Quad Edition CTO Envy 15 000 t for Windows Professional 8.1 but under other devices, I have a PCI of Simple COmmunications controller by mistake with the following hardware ID:

  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C & REV_04
  PCI\VEN_8086 & DEV_8C3A & SUBSYS_1963103C
  PCI\VEN_8086 & DEV_8C3A & CC_078000
  PCI\VEN_8086 & DEV_8C3A & CC_0780

  I can't know what device drivers to install for this question.

  Any help would be greatly appreciated.

  Thank you!

  Hello

  It's the engine Interface Intel Managent driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63410.exe

  Kind regards

  DP - K