insufficient information,

Similar Questions

• Impossible to reset Security Questions us have insufficient information to reset your security questions.

  I tried over and over again honestly, but I forgot my security answers and finally I locked myself out of my apple ID. I tried to change my security questions, but I couldn't.

  Cannot reset the Security Questions

  We have insufficient information to reset your security questions.

  Please help me.

  I can't buy anything on my apple ID because I need to check it out, but it sends a code to an old iPad that doesn't work.

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  
  (144136)

• I need to change my security issues and said we do not have enough information to reset your

  I need to change my security but said Questions we have insufficient information to reset security of your apple ID questions.my is [email protected] I want to slove this problem please help me

  You should contact the account of Apple security team. To join, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (145174)

• I can't reset the security questions. We received notice as below:

  Hello world

  I can't reset the security questions. We received notice as below:

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  Please help me as soon as possible! Thank you very much.

  Hello

  You will need to contact the Apple Support.

  The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

  (I'm afraid that no one here can solve the problem for you - this is a user-based community).

• Cannot reset the Security Questions

  Hello my dear

  -J' forgot my account security questions, but I remember password

  And I'm changing my Security Questions, but show me this sentence

  "Cannot reset Security Questions."

  We have insufficient information to reset your security questions. "

  -I want to solve this problem as soon as possible if permitted

  You should contact the account of Apple security team. To join, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (145081)

• Where is Clean Up selection?

  Is it well enough.  Is it possible to access?  Or is it just went?

  Insufficient information provided to answer question.

• Configuration series pump syringe ONLY-1000

  Hello everyone,

  For my graduation project, I find how to connect a syringe ONLY-1000 pump (the brand is Prosense). I tried to connect through the RS-232 input on the back of the pump (one with 5 points of connection on the top line and 4 in the lower row) to the USB of the PC input.

  This PC is an ASUS EEE (not my first choice, it is pretty slow), but it doesn't have the RS-232 socket. So, it looks like this:

  PC--> USB--> RS - 232--> shoot-syringe

  The PC detects "new hardware" but impossible to install them due to lack of information. When I open MAX I can only find an unknown device, what VISA test panel can not be opened, prompting an error:

  "

  Error opening resource:

  ARSL 10: INSTR

  VISA (HEX: 0xBFFF0011) location insufficient information or the device or resource is not present in the FAT32\

  "

  The installed version of LabView is version of 2013.

  Does anyone have experience with programming series in LabView? Maybe I need a PC with RS-232 instead of the USB port?

  Any help or advice would be appreciated a lot.

  Kind regards

  San

  Hi guys,.

  First of all, thanks for the offer, but I'm not interested. I think the purpose of this forum is to find a solution for the problems that are are using LabView, rather than work around the problem.

  However, I found the solution for this problem.  After all, this is the driver for the USB-RS232 converter that could not be installed. So I bought a new converter with which I have installed the software. It is the electronic converter König (bar code 5412810074822). After installing the driver (which came with a small cd) and restart the PC Max recognized ports and there was not yet any necessary configuration.

  This topic can be closed.

• THE 10 Bluetooth enumerator error

  Bluetooth doesn't work on my ASUS Q302LA.  Settings > devices does not show same as bluetooth is available.  In Device Manager, the following error message is in the properties of the enumerator Microsoft THE.   Any ideas.

  Hi Jerry,

  Welcome to the Microsoft community.

  What operating system is installed on the computer?

  A Code 10 error is generated in the Device Manager in one of the following situations:

  • Device Manager cannot start the device.
  • One of the pilots who needs the unit does not start.
  • The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

    Note In this case, the error Code 10 can be a very generic message indicating some sort of unspecified driver or device problem.

  I suggest you follow the steps mentioned in the article and check the results.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  http://support.Microsoft.com/kb/943104/en-us

  Kind regards

• LeCroy Wavesurfer 454

  Hi everibody.

  I am new to labview and I am tryng to use the Lecroy Wavesurfer 454 with labview 8.6.

  unluckly, I'm not able to use the example of vi in the driver file.

  I launch finder example for Wavesurferand, and then run lecroy vague series acquire waveform.VI and correctly setting the tcpip with TCPIP::192.168.219.53::INSTR statement and run the VI.

  the error I got is:

  VISAHex 0xBFFF0011) location device of insufficient information or resources is not present in the system

  Although with the ping 192.168.219.53 command works correctly.

  Hello red,

  Alan and LeCroy Support here...  The problem is that the VISA resource string you are using is not correct.  For TCP/IP communications with the WaveSurfer400 series, you must install ACIP Passport LeCroy on the remote PC; He is listed as a required component for the driver.  You can download the Passport on the site of LeCroy here: http://www.lecroy.com/tm/Library/Software/LabView/VICP.asp?menuid=8.   When you use the ACIP passport, the VISA resource string to use is ACIP:.  Please let me know if you have any questions!

  Best regards

  Alan Blankman

• My screen has lost about two inches on each side.

  My screen has lost about two inches on each side. I have no idea what's going on that I just got on my computer, and the mode full screen did not come.

  Hello

  ·         What is the operating system that you are working?

  ·         The computer is a desktop or laptop computer?

  Insufficient information provided by you, please answer the questions above.

  It seems that the screen resolution is incorrect. Try changing the screen resolution to fit the screen. The link below will guide you on how to change the screen resolution.

  For Windows Vista and 7:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  For Windows XP:

  ·         Click Start, click Control Panel, click appearance and themes, and then click on view

  ·         On the tab settings in the screen resolution, drag the slider, and then click apply.

  ·         When you are prompted to apply the settings, click OK. Your screen becomes black for a moment.

  ·         Once your screen resolution changes, you have 15 seconds to confirm the change. Click Yes to confirm the change. Click No or do nothing to return to your previous configuration.

  I hope this helps you.

• Response of the SMTP Protocol: 5305.7.0 must issue a STARTTLS command first.

  Insufficient information provided in the error message generated by the error of MSN O.E. advises: Message could not be sent because the server rejected the sender's e-mail address.

  ISP is Sympatico.

  Response of the SMTP Protocol: 5305.7.0 must issue a STARTTLS command first.

  Q: what is the Protocol, and to «Who» the STARTTLS command is sent?

  Your server wants to TLS encryption and you have not enabled in the properties of the account.

  The client sends the STARTTLS command to the server.  See this: http://en.wikipedia.org/wiki/Transport_Layer_Security

  Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• Need to see all the settings in the bios!

  I have a laptop HP G60 - 247CL

  I just put in 4 gigabytes of ram from corsair gaming super fast! Make sure that the settings are correct on the clock on the cylinder speed. Need to see all the settings in the bios but shows no not the memory clock speed!

  How to unlock bios to display all the freaking parameters. If I knew that HP has locked the bios, I would not have bought this piece of shit!

  I can't get CPU - Z no much, but that does not give me the ability to change speeds of memory. I need to make sure that they correct r. I need to be able to enter the wood to make changes. Locking the BIOS settings is really stupid!

  Message edited by hozer on 10/27/2009 16:26
  Message edited by hozer on 28/10/2009 09:06
  Message edited by hozer on 28/10/2009 09:07

  While the Insyde BIOS that is supplied with the units of G60 is insufficient information, there are other routes, you can take to check your ram timings. I found that the timing of the memory itself with enough accuracy on my G60-235 and was able to check it with CPU - Z and Everest Ultimate. (Which are both a freeware or a functional demo.)

  In particular, I noticed that the adjusted to 5-5-5-15 timings (OCZ DDR2-6400) after replacing the modules Kingston stocks. (Which seems to me to remember turned to 6-6-6-18).

  I hope this helps.

• Teredo Tunneling Pseudo interface displays the code 10 in Device Manager

  I have a code 10 on it. I went into the Device Manager and it says that my drivers are up to date for this device. I still have the yellow sign on it?

  Hello William,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  This problem can occur when the device driver is missing or damaged.

  Code 10 is displayed for the following reasons.

  -Device Manager cannot start the device.
  -One of the pilots who needs the unit does not start.
  -Device Manager has insufficient information to recognize the error shows this device driver.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  http://Support2.Microsoft.com/mats/hardware_device_problems

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
  https://Support2.Microsoft.com/kb/943104

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Message "USB Mass Storage Device does not work properly"

  Ran AVG PC tune up and referred the problem message "USB storage device work does not correctly. I went to Device Manager, clicked on "bus USB controllers. He showed the device with a yellow exclamation point USB mass storage. I have double clicked on it, went to the drivers and updated the driver. I received a message that the driver was already updated and got a message "device cannot start (code 10).»

  I thought that maybe he was looking for the storage device of mass external and plugged on the USB port. He has shown in the Device Manager under the other mass storage device but had no yellow exclamation point (I guess that means it's very good).

  Is there an internal procedure and what can I do about this problem? My development program, said that this mistake could cause my computer crashes often or he can go for a long time without replying (which it does).

  Hate to be chatty but I wanted to present all the facts.

  Can someone please help me get this figured out? Thank you in advance.

  Hello Sammy,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause and to check the health of your system, to solve the problem permanently.

  Microsoft does not recommend using third party software melody. That running these software can damage records.

  For the problem with the error code 10, I would ask you to try the steps below:

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. Device Manager cannot start the device.
  2. One of the pilots who needs the unit does not start.
  3. The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

  Note: In this case, the Code 10 error can be a very generic message indicating some sort of unspecified driver or device problem.

  Error Code 10 is mainly related to devices and hardware driver problems or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  I suggest you to follow the steps described in the following Microsoft article and see if it works for you.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Why my 3 adapters in network file going to code 10?

  How to uninstall and reinstall?  It does not work when my computer crashes by previous comments, and then I find that the 3 (Teredo tunneling, ISATAP, 6to4 adapters) are on code 10

  Hi James,

  Thanks for posting your question on the Forums of community of Microsoft.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. What you are trying to access when your computer crashes?

  A Code 10 error is generated in the Device Manager in one of the following situations:

  • Device Manager cannot start the device.
  • One of the pilots who needs the unit does not start.
  • The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

  However, error Code 10 can be a very generic message indicating some sort of unspecified driver or device problem. In this case, I suggest you to try the common steps to solve the problem as described in the following Knowledge Base article.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  From now on, I would suggest that you try the troubleshooting steps carefully the suggested link and let us know if you need additional assistance.

  We will be happy to help you further.