INTAIN1CBP-all-in-one card reader won't work

Similar Questions

• cutting disk all in one card reader wount showup in cumputer

  only show two cd dvd players that I have. It should show an A / drive but wount?

  Hello

  -Did you change your computer, after which the question began?
  -Is the card reader in Device Manager?
  -What operating system is installed on your computer?

  Follow these steps and check if they help.

  Step 1:

  Assuming you are using Windows 7, check if there is any updated material available via windows update. Make sure that your computer is updated all relevant updates.

  
  Use the start menu to check updates
  http://update.Microsoft.com/windowsupdate/v6/thanks.aspx?ln=en&&thankspage=5

  Step 2:

  I suggest you open the hardware and devices Troubleshooter to run the automated troubleshooting services.

• All-in-one 968 printer won't work with Windows 8

  I got the XPS 8500 last week.  After hours of trying to figure out the new operating system, I tried to connect my AO 968.  Nothing prints.  I tried to implement everything.  The printer appear in devices and printers, and he says it's working properly.  My eye!  When a driver will be ready for it?

  Hi Lynnt2,

  The 968 AIO printer is not compatible with windows OS 8.

  Please click here to check the compatibility of printers. http://Dell.to/UMzvYJ

• New connection to Internet Comcast, HP All in One C410 printer won\ ' t work

  Just got a new Comcast Internet connection. The printer is connected wireless. I connect it and the macbook pro laptop to the modem and both show that the wireless connection is present. However the impression that gets saved with print jobs and do not print them. Any help would be appreciated.

  Hello

  You probably need to remove and readd the printer to print.

• Satellite C850-B635 and Win7 - card reader does not work

  My laptop came with windows 8 and the card reader was not working
  but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

  I downloaded a driver called card reader controller, but it did not work as well
  I don't know if there is a problem or there is a driver should I install and I don't know.
  Please help me solve this problem.

  In my windows Device Manager, these devices is not recognized:
  * PCI simple communication controller
  * SM Bus controller
  * Unknown Device

  I tried searching in my page to download drivers on the Toshiba Web site but could not find these
  Please help me make my card reader works again.
  Concerning

  Post edited by: domaking

  For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
  My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

  I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

  In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

  Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

  Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

• driver Ricoh SD card reader does not work after recovery/vista

  Hello

  I have toshiba laptop with vista professional.

  I did the recovery on computer

  Once the recovery sd card reader does not work.

  Yes, I did:

  Downloaded latest driver ricoh xd card disk image

  installed

  restarted

  .. .but still does not work

  does anyone have a solution for this?

  Thank you, klemen

  You update your copy of Windows as directed by my last answer?

  I tried to download driver Toshiba but it seems that there are no downloads for Windows vista for your specific model.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Check the Device Manager for the entries in the card reader under "ATA/ATAPI IDE controllers" and "SD adapters.

  Double-click on the devices to see their properties. On the general tab, note their descriptions and 'device status'.  In the Details under "Ownership" tab select "hardware ID" note the entries under "value".

  You can try to install the drivers built into Windows Vista

  1. in the Device Manager, click on your PC
  2. click on the menu "Action" "Add legacy hardware. Click next in the Add Hardware Wizard.
  3. check the box before "install the hardware that I manually select from a list (Advanced)". Click Next.
  4. under "Types of common hardware", select "IDE ATA/ATAPI controllers '. Click Next.
  5. under "Manufacturer", select "Ricoh company.
  6. in the title of 'Model' select your description of the appliance as shown in Device Manager.
  7. the full wizard.

  There are several Ricoh xD-Picture Card controller, you can try them all and see one that works.

• Satellite X 200 and Windows7 (32 bit) - card reader does not work

  Hi all
  I hope someone can help.
  My X 200-219 has been recently upgraded to Windows7 and although it works well (better), the card reader does not work.

  Do I need a driver installed?
  Various looked but can't find anything obvious?

  Bravo and thank you
  DB

  Hello

  Try to install THIS driverplease.

  It is Vista 32 bit driver for digital multimedia card reader. I hope that it will work.

  Send comments.

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• Satellite Pro A100 - card reader no longer works

  Hello

  I have a Satellite Pro A100 - PSAACE-008002EN, that I bought a month ago, its worked perfectly so far and has been fantastic to use.

  The main part that I use is the memory located on the front card reader, I have used it with SD, MMC and cards XD for my pda and cameras, until now, it worked well, but recently, I was music transfer etc for my Sony PSP Memory Stick using a Memorystick Pro Duo Pro adapter so that the card fits properly in the slot and it works very well.

  All of a sudden the laptop can no more read on my MS card, I tried the card in a usb card reader and it works perfectly with or without the adapter. The laptop card reader reads cards SD MMC and XD, still perfectly fine but when I framed my memorystick, it shows the stick as being there in my computer, but when I click on the dialog box appears and says that there is no disc?

  I tried to install the latest drivers but it does not work, any help is appreciated

  Thank you very much

  Rich

  I found this information and first of all, I want to put a list of supported cards:

  SD (support of multiple Digital Media Card slot) capacity 8MB - 2GB
  Memory Stick (supported by several Digital Media Card slot) capacity 8 to 256 MB
  photo 16-1 GB xD card
  Memory Stick 8 to 256 MB
  Memory Stick Pro 256 MB to 2 GB
  MultiMediaCard 8 MB - 1 GB

  According to this list, the Memory Stick Pro Duo is not supported. But you used an adapter.
  But maybe this is a reason why the card reader cannot read the MS cards more.

  What you can do is to remove the card from the Device Manager reader, and after new restart try to install this new device

• HPE - 590t: 15-en-1 card reader no longer works

  Hi all

  Today, I noticed that my SD card reader stopped working in my HPE - 590t.  I noticed that Windows 10 assigns generic drivers at the following as shown in Device Manager:

  All other players are working perfectly, only the 15-in-1 card reader does not work, which leads me to believe that the generic drivers that has installed 10 Windows are not compadible with this device.

  My HPE - 590 t initially provided with drivers for 15-in-1 card reader and worked well with Windows 7. Anyone know where I can download third-party drivers 3 for this device? I read that some users who have realtek devices are able to use the realtek drivers.

  My HPE - 590 t has a card mother IPMTB-TK Pegatron Truckee - UL8E.

  Given that the specs on my system does not identify the manufacturer of the card reader - 15 in 1, I am at a loss to know where to go for the drivers for the 15-in-1 card reader.   If anyone has any suggestions, I would be very happy!

  HP DV9310 Windows 7 Professional 4 GB RAM

  DV7t-6100 Windows 7 Pro 8 GB RAM

  Hi all

  I just wanted to point to my own son I found a solution.  15 - in a single card reader had apparently dust causing the drive only reads do not my SD cards.  In which case I solved this situation by spraying a can of air into the slots and now the 15 - in-1 card reader works fine without problems.

• My ACER Aspire M5100 9-in-1 card reader does not work. Green light does not illuminate.

  The 9-in-1 card reader no longer works.  The Green led lights when I insert an SD card.  I tried to restart.  Cannot find the driver for the card in the Device Manager.  Does anyone know how to fix this?

  Thanks for all your help.  I solved the problem by turning off the computer, open the computer case and disconnect the cable card 9 in 1 black of the motherboard.  Then I restarted the computer and it re-installed device drivers (message Windows came).  For the first time, card reader devices actually appeared in Device Manager.  Then I turned off the computer, reconnect the cable black and rebooted.  Now everything works fine.

• My built-in memory SD card reader does not work on Windows 8

  I installed Windows 8 on my new Acer AspireOne AO756 and the SD card reader does not work. I looked for some drivers and drivers Acer only give x 64 for Windows 8, but I only have x 32.  Everyone knows about this problem, and if so how to solve? Thank you

  Hello

  I understand that the casting of card reader does not work on your laptop.

  1. you get any error message?
  2 have you tried with different memory cards?

  I suggest you follow the steps mentioned below and check if it helps.

  Method 1:

  You can try to run the hardware and devices Troubleshooter and check if it helps.
  a. press the Windows key + R, type Control Panel.
  b. type troubleshooting in the search bar, click Troubleshooting.
  c. click on hardware and sound, click hardware and devices.
  d. follow the steps in the wizard to run the troubleshooter.

  Method 2:

  You can download the driver for the reader from the link below and install it in compatibility mode.

  http://Acer.supportscentre.com/driver-of-Acer-Aspire-one-ao756-Windows-7-32-bit.html

  You can follow the link given below to install the driver in compatibility mode.

  What is program compatibility?

  http://Windows.Microsoft.com/en-us/Windows-8/what-program-compatibility

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post, we will be happy to help.

• The right side and express USB card reader does not work

  Hello

  The USB 3.0 right on my rMBP does not work. I have can´t to connect any device to this side. No connection or power.

  Express card reader doesn't work or the other. Finder or disk utility will not show map of mountain.

  I can´t find the card express under system reports reader.

  I ran a test for diagnosis of Apple without any problem.

  I have reset the SMC & LANDAU.

  I reinstalled the operating system without success.

  Anyone who knows how to fix this?

  MacBook Pro with OS X El Capitan 10.11.5, Retina display

  Can someone help me here, please!

  Based on what you have tried and if can't see any device in disk utility, you are dealing with a hardware problem.  Your best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• The M70-267 Satellite internal memory card reader does not work

  Hello

  Internal memory card reader no longer works on my M70-267.
  Device Manager reports the error with the driver of the bus PCI 6 mass storage controller, device 4, function 3.
  The first problem, the result of this is?

  Help, please
  thanx

  Hello

  Yes, this mass storage controller could be the card reader. So, you can try to reinstall the drivers, which can be downloaded here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  or you can remove it from the Device Manager and restart your machine

  or, if that didn't help then you should send your machine to a service partner chartered for an assessment of health/repair of equipment.

  To find the closest, you can check out this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  See you soon

• SD card reader does not work

  1 hp Pavilion Dv7-7002el

  2. Windows 7 64 bit

  SD card reader does not work

  Thank you

  Welcome to Brunn.

  Try to run this driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102462-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5254140 & sw_lang=.

  Let us know how things will go.

  REO