Integral in the calculation Manager

Similar Questions

• The value of path as unit target in the calculation Manager

  Hello

  is there a way to define a course of treatment as unit target in the calculation Manager? I have data with unspecified units (for example, deg_Cel ° C) then I disabled the calculation of the amount in function. Now I want the result channel have the same unit as the first input channel (something like @@ChnUnit (N) @).

  Best regards

  Martin

  Hi Martin,

  You can launch the Manager of calculation without management unit (turn based on the amount off the coast).  You can set the property unit of the resulting string with ChnDim() to be of the same unit as the starting channel.  I guess you do all that with a VBScript.  You actually run the Manager calculation by hand with the mouse?

  You can add as many lines of VBScript code that you want at the end of the normal equation.  Here is an example of calculation which comes with tiara:

  P = n * (2 * Pi / 60) * M * (1 / 1000)

  If you click the button, you can add the following line of VBScript call second to run the equation:

  Calculate the call ("P = n * (2 * Pi/60) * M * (1 / 1000)", CurrSymbols, CurrValues, "kW")
  
  ChnDim (P) = ChnDim (n)

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• The calculation Manager GUI

  Hello

  In the calculation Manager GUI does not appear in FireFox (I have remote XUL addon installed and activated) and wrote a plugin is required to view this content. This plugin should be?

  Thank you

  It requires adobe flash player 10 +.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Automate the calculation against Essbase ASO through the calculation Manager

  Hi all

  Anyone know if I can automate the calculation stored in calculation on a cube Essbase ASO Manager?

  I need calculation automated directly against an Essbase cube as it is not a planning application.

  I tried to use CalcMgrCmdLineLauncher.cmd , but it seems not to be able to find the application. I'm assuming that she tries to locate a planning instead of an application of Essbase application.

  Currently I have a number of calculation parameters in the calculation Manager but I would like to automate the process, as well as on a daily basis, the cube is rebuild and recalculated.

  Any ideas if CalcMgrCmdLineLauncher.cmd should work or if there is another method, in addition to my calculations in MaxL.

  Thank you

  Jimmy

  What version? If it's so 11.1.2.3 for Essbase you use a launcher separated in % EPM_ORACLE_HOME%\common\calcmgr\11.1.2.0\lib, calcmgrCmdLine.jar file if it is an earlier version and then probably will need to use MaxL

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Cannot use Smart list postings in the calculation Manager

  Hi all
  
  I wrote the script with condition for active listings in Cal Script
  
  If ("Eligible Grade" == 1)
  'Per Diem per capita' = 3500;
  "Travel fees per person ' =' Per Diem per capita' * 'Journey' + 'Avg ticket cost per head."
  "Per diem"="travel time" * 'Per Diem per capita' * 'no. People who travel. "
  "Ticket for depreciation" = 'Avg ticket cost per head' * 'no. People who travel. "
  'By Diem travel expenses allowance ' ="' + 'Ticket for depreciation;
  
  ELSE IF ("Eligible Grade" == 2)
  'Per Diem per capita' = 2200;
  "Travel fees per person ' =' Per Diem per capita' * 'Journey' + 'Avg ticket cost per head."
  "Per diem"="travel time" * 'Per Diem per capita' * 'no. People who travel. "
  "Ticket for depreciation" = 'Avg ticket cost per head' * 'no. People who travel. "
  'By Diem travel expenses allowance ' ="' + 'Ticket for depreciation;
  
  But same Script does not work in the calculation Manager... I know in the work of Manager Smart calculation list differently... can can pls let me know how we need to change to adapt to the calculation Manager

  Hello

  The person above didn't say that [[Smartlist.value]] returns a Boolean value, so you still have a Boolean value in your IF condition.

  Use

  IF ("Eligible Grade" == [[XXGradeEligibility._1_2]])

  instead.

  Thank you
  JM

• Could not find the calculation Manager option in the menu

  Hi all
  
  I have configured the calculation Manager in my machine [version: 11.1.2].] I can't find the calculation Manager option in the menu [Navigate-> administer-> calculation Manager].
  Calculation Manager is running. Kindly guide me to overcome.
  
  Thanks and greetings
  Alizée

  If calc manager has been installed after the configuration of the web, re-run the web comfiguration step. You may also cycle in the service of SST on the Foundation subsequently.

  Kind regards

  John A Booth

• Cannot access planning applications after you have added the calculation Manager

  Hi guys,.
  
  I have recently added/installed the Manager calculation on an environment running (EPMA, HPL, BSE) (11.1.2.1/win 2008r2 64 bit), which had prior to installation of the Calc Manager. EPMA and planning applications in classic and running.
  
  After that, I deployed the calc manager and configured the Web server on the server of the Foundation/epma only, I have 3 servers (Foundation, Manager of epma and calc), Essbase and planning.
  
  I have restrated the services and I can open the calculation Manager.
  
  When I try to open the existing applications of EPMA I get:
  
  [launch the journal]
  [< BEA-101020 > < [path of the module: HyperionPlanning ServletContext@6352948[app:PLANNING: / HyperionPlanning spec-version: 2.5 version: 11.1.2.0]] Servlet failed with Exception
  java.lang.ClassCastException: java.lang.NoClassDefFoundError
  at HspLogOn.Handle (unknown Source)
  at HspLogOn.doPost (unknown Source)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at HspValidationFilter.doFilter (unknown Source)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  >
  [End log]
  
  I tried to transfer the applications of EPMA exisitng but it has been abandoned with (HTTP/1.1 500 Internal Server Error)
  
  I checked the ohs_component newspaper and saying some file is missing:
  
  [launch the journal]
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/bpmui/resources/bpm_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/wspace/resources/wksp_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/cds_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/tools_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/reporting_analysis/resources/fr/fr_web_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/planning/resources/hp_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/awb/resources/awb/awb_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/aif/resources/aif-global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/calcmgr/resources/calcmgr_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/raframework/resources/changeManagement_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  File does not exist: D:/Oracle/Middleware/EPMSystem11R1/common/epmstatic/webanalysis/resources/resources_global_en-US.js, referer: http://[server]:19000/workspace/index.jsp
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet? action = validate_workforce_or_capex & license_type = all & lang_id = en, Resp Code: [500]
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet? action = validate_workforce_or_capex & license_type = all & lang_id = en, Resp Code: [500]
  ....
  File does not exist: D:/Oracle/Middleware/user_projects/epmsystem1/httpConfig/ohs/config/OHS/ohs_component/htdocs/favicon.ico
  Failure for the request: / HyperionPlanning/servlet/HspAppManagerServlet, Resp Code: [500]
  
  [End log]
  
  
  Appreciate any help! and thanks in advance,
  Omar
  
  EDIT:
  I found that all the. JS files that are missing are actually there only without "-U.S.»
  
  Published by: Omar on January 23, 2012 15:17

  Have you tried to redeploy planning again?

  In theory, you should be able to install/configure additional products at a later stage if because they are produced of foundation it may have caused problems.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Constants in the calculation Manager

  Hello, is there a way of constant output in calculation Manager?  I tried to generate a value, but I get an error (object required: 'CurrCalculationValues').

  Specifically, I want the molecular weight of carbon output.  Since it is a constant 12,011 g/mol, that I do not see how to set the value to use in other calculations.  I don't want to enter the constant in each calculation that uses it as an input, I prefer to use the dependency.  (There are other constants which are a little more complicated than this one).

  I guess I can sum up my question like: "How you use constant OUTPUT calculations as INPUTS to other calculations channel."

  Hi Russell,

  I recommend that you export each constant to a property attached to the root level, group or channel (depending on which is most appropriate based on the scope of the constant).  Then, you can reference this property as an input in the subsequent calculations.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Manage columns in the calculation Manager

  Good morning guys,

  Is there a way to define the calculation always Manager show all columns (including deploy and validate the columns).

  Whenever I come home manager calculation I need to go to view-> columns-> show all to display the columns that mean the most to me. For instance, I always prefer to see validate and deploy the columns instead of the Description.

  Is there a way to set this column is always visible, when I enter Calc Manager?

  Thanks in advance guys!

  Best regards

  Eduardo Almeida

  I do not believe that the information is stored so that when you connect to the Manager of the workspace and calculation it will reset.

  See you soon

  John

• Cannot run business ruleset using the Launcher command line for the calculation Manager

  Hello

  I use the Hyperion 11.1.2.2 planning version. I am trying to execute a business rule defined via the calc Manager command line utility. Please see the order form below,

  D:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1 > CalcMgrCmdLineLauncher.cmd /U:HBRadmin D:Capex /A:CORP S:Capex_Nightly

  At the launch of the above command, the utility starts and ends without triggering the rule in the database. See log info below,

  Local planning: en_US

  using java.library.path: D:\Oracle\Middleware\EPMSystem11R1/products/Planning/lib64

  EPM_ORACLE_HOME (D:\Oracle\Middleware\EPMSystem11R1) has the value of the property 'EPM_ORACLE_HOME' of the JVM.

  using the property of Java for Hyperion home D:\Oracle\Middleware\EPMSystem11R1

  For the non - RFP app, ask size is not necessary

  EPM_ORACLE_INSTANCE (D:\oracle\Middleware\user_projects\epmsystem1) has the value of the [EPM_ORACLE_INSTANCE] property of the JVM.

  Support RTC Essbase Version: 0xb1221

  null

  But if I try to execute a business rule with the calc Manager command-line utility, it works well. It is only rules base which poses problem. Please note that this set of rules is to have business rules that belong to a database that is Capex.

  Any help on this request would be much appreciated. Please notify.

  Thank you

  AP

  Please ignore this request,

  I found the KB article below

  Hyperion Planning Rulesets cannot be launched using the CalcMgrCmdLineLauncher planning (Doc ID 1453630.1)

  Thank you

  Arun

• Location of the log of the calculation Manager?

  I have searched everywhere for it, anyone know? I have "you're looking for the equivalent of what was the HBRLaunch of m log for business rules that I can see asks what time of execution have been entered, how long the rule Manager calc took etc...
  
  Thank you!

  11.1.1.3, page 31 version: http://docs.oracle.com/cd/E12825_01/epm.111/epm_install_troubleshooting.pdf
  11.1.2.1 version, see 36:http://docs.oracle.com/cd/E17236_01/epm.1112/epm_install_troubleshooting_11121.pdf

  See you soon,.
  Mehmet

• Rule Variables display business as Undefined following import for the calculation Manager

  On the Variables tab in a source system Calc. Most of our business rules Manager have defined variables.

  However following export / import in a Calcualtion System Manager target the same variables appear as "undefined". Therefore, I am unable to validate the rules in the target calculation System Manager as it requires me to enter valid values for each variable before doing so.

  It is a section of the xml file used to export/import showing a particular variable and its reference in a rule:

  < variable id = "107" name = "FCOrtpBudgetHolder" product = 'Planning' type = 'Member' use 'const' = >

  < property name = "description" is used to specify the support Budget, can be level 0 or/Property parent >

  < property name = "application" FCO/Property >

  < property name = / false Property "allowMissing" >

  < property name = / false Property "useLastValue" >

  < property name = "convert" / Real Property >

  < property name = / Property select Budget holder "prompt_text" >

  < property name = 'dimension' BudgetHolder/Property >

  < value / >

  < / variable >

  < rules

  < rule id = "320" name = 'FCO_3YrAdjBud_AdminRec' product 'Planning' = >

  < property name = "description" BusAmend_HBR_001: THIS RULE WILL COPY DATA to ENTRY AGAINST INPUT_TOTAL_SECTION to no. SECTION if USERS SELECT INPUT_TOTAL_SECTION, OTHERWISE IT TO THE/Property SECTION 'TOTAL' MEMBER AND COPY IN INPUT_TOTAL_SECTION >

  < property name = "application" FCO/Property >

  < property name = "plantype" FCO/Property >

  < property name = "display_label" FCO_3YrAdjBud_AdminRec/Property >

  < property name = "comment" / >

  < variable_references >

  < variable_reference id = "107" name = "FCOrtpBudgetHolder" >

  < property name = / Property "seq" 1 >

  < property name = "application" FCO/Property >

  < property name = / false Property "useAsOverrideValue" >

  < property name = "scope" FCO/Property >

  < property name = 'type' 3/Property >

  < property name = "hidden" / false Property >

  < property name = "sΘcuritΘ" use by default/Property >

  < property name = "nom_regle" FCO_3YrAdjBud_AdminRec/Property >

  < / variable_reference >

  Rest of rule etc...

  
  

  All the

  Forget that - I showed me the error of my ways. The simple clearing browser solves this problem - never thought!

• Graphic designer does not display in the calculation Manager

  Version running on Windows Server 2012 11.1.2.4.  I tried on Firefox and IE11.  Research has made me to install flash player.  Windows 2012 has built, I enabled flash player in 2012 Windows thanks to the desktop experience but it still does not work.

  Maybe there is no solution at this stage, but I wanted to see if someone has met/fixed it.

  I was able to make it work in windows server 2012 R2 (I guess even could help in 2012)

  I installed the desktop experience, but had to install flash, use the standard install flash website https://get.adobe.com/flashplayer/ , but you must make sure that you disable IE Enhanced Security Configuration to do the installation.

  to do this, go to Server Manager-> server room next to properties for IE Enhanced Security Configuration, set it to OFF.

  After installing flash and ensuring that everything is working you can reactivate security improve if you wish.

  I use Firefox, cool by default install the latest version.

  a last step, you can try would be to make a reset in Firefox, then re - install flash again.

  reset instructions for Firefox here: https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings

• Calculation Manager does not start after the 11.1.2.3.500 patch

  Hi all

  Before the upgrade with the patch 500 the EPM environment worked very well.

  After you apply the hotfix (17529887) and later (19142919), I am facing a strange error.

  After restarting the services, Manager of calculation does not work. All other components of EPMA operate correctly.

  When trying to start the calculation Manager, the window becomes like a Web page when there is no internet connection. Internal error in the server with instructions to check your internet connection, etc..

  I looked in several log files, but did not find anything.

  Where to look?

  Kind regards

  Philip Hulsebosch

  Hi Philippe,.

  We had the same problems with our manager of Calc, but our environment was on a SSL using SST. To apply a patch 18880328 on 17529887 to get this working. Don't know if you're on SSL, but its value give a try.

  From the Readme:

  18814874

  After the application SSL using SST, sailing Manager of calculation, may show a blank page.

  https://updates.Oracle.com/Orion/services/download?type=Readme&Aru=17802865#_Toc391649535

  You also have to apply 11.1.2.3.501 Hyperion Shared Services (18672071) If you are on SSL.

  HTH

  Thank you

• Calculation Manager is not available from the workspace

  We have recently installed Hyperion Planning v 11.1.1.1.0 to a customer. The installation consisted of EPMA. Everything works fine (app created, responsible for dimensions, forms of work, etc.) with one exception. We cannot step Manager appears as an option in the menu under "Administer" in the workspace. We installed the calculation Manager Finally, after that everything was in place. We have configured in the EMP system configurator. The calculation Manager service is running and everything seems to work in EPMA. I use the user ID is a shared services administrator with administrator rights Manager calculation.
  
  I have to do something stupid, but unfortunately the calculation Manager is new to me. We tried to restart all services.
  
  Any ideas?

  Hey Jake,.

  You redeploy workspace and re-configuration of the web server after the installation of the Calc Manager?

  Just like all the other components workspace does not recognize if it was installed after the deploy/web server config workspace - poor design in my mind.

  Kind regards

  -John