Integrate with IBM RQM Teststand
Hello
I'm trying to implement the 'NI Test integration adapter for IBM Rational Quality Manager' and so far the adapter connects to the RQM Server successfully but throws an error saying that it 'Impossible to detect NI TestStand' but then proceeds to open TestStand and run the verification sequence once the dialog box is closed. Then, it presents itself as a registed RQM adapter but is listed as "refractory".
Someone else has had this problem, could you address them and if so, how? Thank you.
-Va
Dan,
It turns out that the latest version fo the adapter does not support the most recent version of TestStand without a bit of a hack job.
From what I can tell, the RQM adapter starts TestStand using either a path or windows registry may be hardcoded to specific versions of TestStand (just guessing) because when I installed TestStand 2013, I have not had any problems.
I was actually able to operate using the tool of selection of NI TestStand engine version, the version active by setting in 2013. Then I copied the contents of the directory of the program of TS 2014 to the TS 2013 (after making a backup) so when the adapter goes out and calls TS 2013, it actually launches 2014.
Like I said I am guessing on the underlying mechanism used by the adapter, but it seems to work as expected.
Ultimately, however, it is best to use only 2013 to 2014 is supported technically.
-Va
Tags: NI Software
Similar Questions
-
Logic Pro will integrate with Alesis adat?
Logic Pro will integrate with Alesis adat? If so, how?
Do not take into account statement below
Define integrate them, there are several scenarios, I think how you want to integrate the ADAT machine with logic.
To record 8 ADAT tracks simultaneously in Logic, you'll need...
1. an audio Interface 8 input analog
or...
2. an audio Interface with an ADAT i/o.
-
I have a problem with IBM Lotus Symphony - the program crashing several times every 5 seconds
Original thread - I have a problem with IBM Lotus Symphony. I am trying to edit a document, and I can't get any task done without the program crashing several times every 5 seconds. What can I do to fix this?
The program crashes every 5 seconds. I started having this problem last night, but I didn't even know that first of all, there was a problem until today.
Hello
You receive an error message/code when you edit a document in IBM Lotus Symphony?
I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.Note: when you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.How to solve the problem by running the clean boot in Windows 7:
http://support.Microsoft.com/kb/929135Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.If the problem persists please contact the IBM Lotus Symphony support for assistance. See the link below.
http://www-03.IBM.com/software/Lotus/Symphony/ForumnsHome.nsf/homeIt will be useful. -
Version of Cisco ACS 5.1.0.44.3 integrate with active directory Microsoft windows 2012 R2 server?
Unfortunately, it does not support R2 2012
5.1 ACS supports all editions of:
Windows Active Directory (AD) 2000
Windows AD 2003
Windows AD 2003 R2
Windows AD 2008
Windows AD 2012 R2 is supported after ACS 5.5 patch 1 and following.
Please find below the steps to go from 5.1 to 5.5 hotfix 1:
STEP FILE COMMAND Apply the 5.1 patch 6 5-1-0-44 - 6.tar.gpg ACS patch install repository 5-1-0-44 - 6.tar.gpg ftp_repository_name Apply 5.3 ACS_5.3.0.40.tar.gz application upgrade ACS_5.3.0.40.tar.gz ftp_repository_name Apply the patch 5.3 8 5-3-0-40 - 8.tar.gpg ACS patch install repository 5-3-0-40 - 8.tar.gpg ftp_repository_name Apply the sharp Patch Pointed-PreUpgrade-CSCum04132-5-3-0-40.tar.gpg ACS patch installs Pointed-PreUpgrade -CSCum04132- 5-3-0 - 40.tar.gpg repository ftp_repository_name Apply 5.5 ACS_5.5.0.46.tar.gz application upgrade ACS_5.5.0.46.tar.gz ftp_repository_name Apply the patch 5.5 1 5-5-0-46 - 1.tar.gpg ACS patch install repository 5-5-0-46 - 1.tar.gpg ftp_repository_name Best regards ~ jousset
-
Hi all:
I'm looking for compatibility / information on the certification of database Oracle 11 g and 12 g Messaging Gateway with IBM WebSphere MQ 8.0.0.
The only information I have found so far is in Doc 219410.1 ("What platforms and Versions of Oracle is the available Oracle e-mail gateway?"), where it is said:
MGW v9.2 and 10g is certified with IBM WebSphere MQ (formerly MQSeries) v5.2, v5.3, and V6 in accordance with the following table.
MGW 11.1.0.7 and 11.2.0.2 is certified with IBM WebSphere MQ V6 and Websphere MQ V7.0.1.
But I can't find all the information related to Websphere MQ V8.0.0 or on the compatibility of version 12.1. Do you know where I can find it?
Thank you!
Hello
I had already looked at in this document, but there is no information on MQ 8.0.0 or certification with Oracle Database 12 c. I opened a SR asking about it and they confirmed that the latest version which is currently certified is 7.0.1, but MQ 8.0.0 might work as well.
We test MQ with 11.2 release 8.0.0 and it works well so far, so maybe that oracle certify it with 12 c...
Kind regards.
-
Tell Oracle webcenter 11.1.1.8 integrate with oracle EBS 12
Dear friends,
I use content oracle web center 11.1.1.8.0 and I want to integrate with Oracle EBS R12 1.3. I'm unable to find any step guide / tutorial from any side. Each of you would provide all my prior instructions and step by step to perform this activity successfully.
Thank you
Kind regards
Riaz Ahmed
Anand, should I have any /patch fixpack to exercise this activity.
Kind regards
Riaz Ahmed
-
I want to allow my subscribers of the site the ability to upload their own content and save it in a repository that is clean. Maybe even integrate with Dropbox. Any ideas to do with BC?
This type of installation may be feasible. After the client in a secure area log, they can download files under their own account using case (Web Forms with file attachment fields) or webapps. Everything really depends on the level of complexity you need.
Hope this helps,
Mihai
-
I currently use PS5 and LR5. If I subscribe to CC PS these new programs it integrates with my older versions, or I would have then two versions of each program on my computer?
If you install the creative Cloud versions, you will have then two versions of the two. You can uninstall the old ones if you don't need two versions of each, but you must first disable them if you ever want to use them on another computer.
-
VMware SRM with ibm midsize V3700
Hello
I need to deploy MIS Program with ibm midsize V3700. I have to use storage replication (table). There is a feature called mirrored that allowed this replication on the remote storage. But vmware Web site I've not seen corresponding SRA. have someone deployed this kind of config? What SRA can I use?
I thank in advance
You must use the card replication IBM SVC storage version 2.2.1 You can download from the VMware site. For more information, see IBM Storage Host Software Solutions Information Center
-
Hi all, I of build my lab with IBM x 3690 x 5 with 128 GB RAM, the problem j’ai is I have two VM machines on IBM with esxi and it works perfectly, but go up another vm that vcenter and it does not recognize my network card
IBM X 3690 WITH ESXI 5.5 = ESXI01 + ESXI02
= =
= =
= =
vCenter winxp
any idea?
On your VSwitches promiscuous mode.
Datto
-
Can new Acrobat DC integrates with Word 2010 to merge to PDF?
I have a form of fusion and mailing that I use every month to send certificates. Currently I have Acrobat X Pro that integrates with Word 2010 to allow me to click on a button to merge all my folders individual documents in PDF format and send everyone on the appropriate recipient. (It's amazing)!
Does this feature exist in XI Acrobat or Acrobat DC?
According to this page (web browsers and applications of PDFMaker) the PDFMaker plugin of XI and DC is compatible with Office 2010, while this feature is still available, even when you upgrade to these versions.
-
What a blog can integrate with Muse
What a blog can integrate with Muse
I tried tumblr and disqus, I need to know is there any good widget that can be used to achieve the same.
Also bought qooqee tumblr widget but better to use the iframe...
I also want to make an area safe for a client connection, it is desirable that any advise.
Ashraf Ali
Sounds like you might want to take a look at the host plan Web Marketing Business Catalyst. Blogs and secure areas are simple enough with Business Catalyst.
-
Hyperion 11.1.2.3 integrate with Obiee 11.1.1.7.1
Hi all
I installed Hyperion 11.1.2.3 and Obiee 11.1.1.7.1 then try to integrate with hyperion obiee.
When I try to do the follow-up,
HSSConfiguration.bat registry
getting below error:
Exception in thread "main" java.lang.NoClassDefFoundError: com/hyperion/css/ESSC
Xception
at oracle.bi.server.hssregistration.BIEERegisterer.execute (BIEERegistere
r.Java:70)
at oracle.bi.server.hssregistration.BIEERegisterer.main (BIEERegisterer.j
AVA: 138)
Caused by: java.lang.ClassNotFoundException: com.hyperion.css.CSSException
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged (Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
... 2 more
CSS.jar and registry - api .jar files copied from way of Hyperion obiee as mentioned below in the blog of John:
http://John-Goodwin.blogspot.in/2013/05/EPM-workspace-integration-with-OBIEE.html
If someone has this problem, please comment.
Thank you
Mady
Did you really follow all stages of http://john-goodwin.blogspot.co.uk/2013/04/epm-workspace-integration-with-obiee.html
Did you properly tracking registration.properties, did you update ORACLE_BI_HOME, ORACLE_HOME, JAVA_HOME in HSSregistration.bat, is the correct reg.properties being produced in the same location as the HSSregistration utility.
Yes, you enter the user name of the Shared Services password, as is the register HIT.
See you soon
John
-
Hello!
Please help me to solve the problem:
While I run the test of the recovery plan, I got an error:
Prepare for Test storage: information about the recoverable error reported during execution of the SRA: failed to create a snapshot of lun.
Some information about my infrastructure:
SiteA:
vCenter 4.1 U1
ESX 4.1 U1
SRM 4.1.1
SRA - IBMSVCSRA_v1.20.10713
IBM midsize V7000 - (6.1.0.7 Firmware version)
SiteB:
vCenter 4.1 U1
ESX 4.1 U1
SRM 4.1.1
SRA - IBMSVCSRA_v1.20.10713
IBM midsize V7000 - (6.1.0.7 Firmware version)
Use this guide to set up RS: http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP101765
DatastoreA replicated to SiteB to SiteA (used Global Mirror - asyhronious replication). Replication status: synchronized coherent.
Beautiful work of connection between the SRM, Array Manager on SiteA servers configured successfully, Array Manager Configuration SiteB completed with WARNING: cannot display the data store groups. Replicated devices could not be matched with warehouses of data in the inventory, the inventory on SiteA configured successfully mapping, inventory Mapping on unconfigured SiteB, stimulus package on SiteB created successfully.
Replicated LUNS mapped to ESX on SiteB. In the storage adapters (vSphere Client) configuration window that LUN is listed as a device, but VMFS replica LUNS do not appear in the windows of storage as data store configuration.
Logfile of attachment of the SRM.
Thanks for your help!
Hello
I have no experience with IBM Storage, but replicated LUN must not be mapped to the ESX host on the recovering site (site B). SRM should do the mapping when you perform a failover (or create and map the snapshots when test).
Check again your configuration of the SRA. I think you missed something.
Michael.
-
3rd party Software to integrate with the current application
Hi all
Could you please me (simple steps-;)) how to use 3rd party software to integrate with current (ATG) application.)
Example: cybersource (validate the address and the credit card), for this what are the steps we must follow and we need create components to configure the software.
I'd appreciate if you share the resolution, it will be useful to others too.
Kind regards
Jyothi.MJI think it would be a good start
http://www.Scribd.com/ron_gelinas/d/64173966/41-integrating-CyberSource-with-ATG-Commerce
Thank you
Maybe you are looking for
-
There is no feature of "-non-piste" on my version
I have Windows XP and update my Firefox. However, there is no feature of "-non-piste" in the menu options.
-
Error in the product recovery CD
Hello I have Toshiba Satallie A110-195Today, I tried to use it to shape the product but when recovery reached 66%, he is arrested and this message ((ERREUR: ne PEUT PAS LIRE DE COMPRESION FILE (1).)) What is the problem?Is the CD or CD drive problem?
-
Re: Toshiba l450d touchpad
Touchpad is very sensitive so, how do I change the settings please?
-
I am running Windows xp (32 bit) and when I try to play a video slip from my library on Media Player 11, the reading is terribly nervous and irritating. What can we do about it? I tried to expand the buffer zone, but this does not seem to make a di
-
What is my incoming and out going mail server
When I go to craigs list to apply for a job, I try to answer an add-on and outlook express tells me the incoming and outgoing server is incorrect. I put my pop3and server is smtp. What are the correct servers, I have windows xp?