Integrated e-mail client: never add more than one account

Hello

User of Z2 Tablet here. I would really like to be able to use his email Client because I think it's rather a good search. But I can't add more than one account. Whenever I have add a new one, in this case:

I enter all of my information, they are correct, no error, I type the account name and my name of the sender in the last screen. And then, when I click on 'Next', poof, it's gone. There is a small bubble near the bottom of the screen that says "account not found. It may have been deleted"(in German, this is a rough translation). And faithfully, it not there no other account e-mail anywhere in the application.

What can I do?

Thank you!

Old thread, but still just want to share my experience.

I had the same problem. After the upgrade to the lollipop everything worked fine, but then I had to clean the cache and reset the email client and after that, I could not add more than one account... until I cleared the cache partition.

To do this, follow these steps:

-On the home screen, press volume up and hold

-At the top by pressing volume, press the power button and hold the two keys until the phone turns off (you will feel a slight vibration when stopping)

-Switch on your phone as usual

Tags: Sony Software

Similar Questions

  • How to add more than one electronic signature on a model

    Hi, I searched online and on the Bulletin Board in regard to trying to add more than one additional signature area to the I am working on a form template, which requires more than one signature. I went through the whole process and placed all the boxes of signature for each participant (3 in total), but whenever I send on should be dealt with by my colleagues and we have try to sign, it only allows us to do an e-signature and not the other 2 signatures that must be included with the paperwork. Please can someone advise if there is a step that I might be missing?

    Thank you.

    Hi karlac94348387 ,

    Please provide the application & version of the OS installed on your system.

    Also share you workflow & name of the application using what document is signed.

    If you submit this form using Acrobat application place digital signature fields, make sure that save you the form with Reader features Extended so that if other users have only the Reader app they can fill out the form as well. (File > save as other > Reader Extended PDF > allow more tools)

    You can also place electronic signature fields after the role definition for all participants for the respective fields using "send to the signature" (if you have Acrobat Pro DC continuous version), more on this please refer to the article:- adding form fields. Tutorials

    Send agreements and collecting signatures

    Let me know how it goes.

    Kind regards

    Christian

  • How can I add more than one animation to a charater?

    When I create a character in the fuse or Maximo and then export to Photoshop, what I would like to know how to do, is to add more than one animation to the time line. For example, in the chronology of Photoshop that frightens my character, then dance and then run. All I can add is an animation on the timeline, what I am doing wrong.

    If for any reason, it cannot be done in Photoshop, and then tell me how to do this in C4D or what ever.

    Thank you

    Kazue salvation!  To present Photoshop, fuse and Mixamo does not have complete robust mixture and animation timeline features required to do this.  You certainly need to combine them into a 3D application 3rd in group, but we don't have tutorials to do that for the moment.  I recommend to check the documentation for the software you want to use (Cinema 4 d, for example, as you mentioned) and watch their animation mixing or layering of animation systems.  Unfortunately, it is difficult to provide documents for each package there.

  • Is it possible to add more than one customer in net agreement R12

    Hi Experts,

    Is it possible to add more than one customer in net agreement R12. Please suggest me as soon as possible.
    System does not show more than one customer during the creation of the compensation agreement.

    Kind regards
    Rahul

    Hi Raju,

    Currently, there is no functionality to import compensation via the interface conventions.
    There is a demand for improvement raised for the issue.
    Bug 7441955: NEED of API FOR CREATING programmatic from NETTING AGREEMENTS

    Reference-
    Interface or API required to load of AP/AR NET agreements [ID 1417380.1]

    Kind regards
    Ivruksha

  • Add more than one item in a cell of h:panelGrid

    How to add more than one item in a cell of h:panelGrid in jsf?

    Put them in a h:panelGroup.

  • Is it possible to add more than one constraint for a column?

    Dear team,

    Is there any possible to add more than one constraint for a column?
    I add a unique for a column, but I try to only add is not null for the same coloumn.
    His throws error

    ERROR on line 1:
    ORA-01430: column being added already exists in the table

    Thank you
    Augustine

    You can see here

    SQL>CREATE TABLE test_cons( N1 NUMBER);
    
    Table created.
    
    SQL>ALTER TABLE test_cons ADD CONSTRAINT UK_TEST_CONS UNIQUE(N1); 
    
    Table altered.
    
    SQL>ALTER TABLE test_cons MODIFY ( N1 NOT NULL);
    
    Table altered.
    
    SQL>
    

    Concerning
    Arun

  • How can I associate my rt surface with more than one account of sky drive

    How can I associate my rt surface with more than one account of sky drive.

    You will need to create a new account on the computer by using the Microsoft Account associated with the other SkyDrive.

    To create a new user, open laptop settings, in the general section, click 'add a new user '.

  • How can I get rid of the coding that adds more than one page to print email?

    I now get more than just the sender, date, and issue information in emails. What information from "source"? Is it possible that I can print the email without printing the part "source"? I tried to copy what I would get if I printed the e-mail, but it's beyond my skill level. I hope that there is a switch somewhere that I can change to fix this problem.
    Thank you

    View | Headers | Normal

    I think that yours is set to "All".

  • Can I add more than one license in a single Adobe account?

    Need to know if I can buy several licenses in my Adobe account, to manage properly

    Hi Luis,.

    Welcome to the Adobe Forum,

    You have CC for individual bought on

    March 4, 2014

    which can be activated on both machines with the same Adobe ID.

    How ever if you want to use more than two machines, you can cancel this order & get it paid off because it is within 30 days of the purchase & buy the creative cloud for the team, in which you can buy seats & assign to the user as you want to.

    Each user can activate twice with 100 GB of space compared with 20 GB of space to the CC for anyone.

    Kind regards

    Baudier

  • I want to know if we can add more than one network card and maximum how we can add?

    Well, if I want to add a network card or two at - it a possiblity of external cards containing those integrated? If so what to do with it?

    This would be only limited by the number of slots or ports for the cards.  What exactly are you trying to accomplish?  These types of configurations are generally only used on servers and, depending on what you are trying to accomplish, the use of multiple network cards usually leads to two simultaneous situations:

    1. Headaches size Texas!
    2. Size of Texas PITA!

    Shortly after affected by these events of size of Texas follows a sudden want to break the computer with a hammer usually...

    John

  • How can I add more than one virtual network card?

    I am running Small Business Server 2003 as a virtual machine, there is only one NIC given by VMWARE, I want it 2 because it is a requirement of SBS. How can I do this?

    Thank you

    Jane

    One of the known limits of the VI Client is that it won't change VMs virtual hardware is a greadter of the version 4. Server 2.0 creates VMs version 4 so it looks that you have upgraded the hardware, possibly for support of USB 2.0, which means that you can change only the user Web interface unless you want to do this via the directly .vmx file manually editing.

    You can add the material in the web user interface, you select the virtual machine in the left pane on the left by clicking on it and select "Add Hardware" as directed by the attached screenshot.

    There are ways to downgrade to a hardware version 4 - I only if necessary upgrade for most of my virtual machines are 4 so that I can use the VI Client.

  • Can I add more than one horizontal separator to the PanelUI (new menu panel)

    Steps to follow:
    1. click on the new menu panel button (hamburger)
    2. click on customize
    3. on the left, drag 'Separator (for the Panel menu)' of 'Tools and additional features' in the Panel on the right. Appears in a horizontal separator. "Separator (for the Panel menu)" no longer appears in the 'tools and additional features.

    I can add the many 'separator' (vertical separator) on toolbars, but it seems that I can only add a "separator (for the Panel menu)" (a horizontal separator) in Control Panel.

    I would like to add additional horizontal separators in the Panel. Is it possible to do?

    Firefox version: 33.1.1

    Firefox does not come with a separator element in the palette to customize.

    You have the extension classic restaurateur theme?

  • How to add more than one VPN in an existing VPN config

    Dear team

    I would like to ask your help fast... am not a Cisco guru, but I would like to know if I can get help on how to add a VPN to an existing one. My company already implemented a VPN site to site with a dealer or partners where they are or sharing some data them and make transactions, but the question is, I am now about to add 2 several other company so that I can create another tunnel VPN to each of them without risk of breakage or unplug the old one that is running. How can I do, can someone help me to implement it?

    Thanks in advance for your help.

    use Cisco 1841 version 7.

    1. now I want to know, is who should I ask for an IP access list? Should I create or I have to ask my partner to put it for me so I can put it in.

    The access list consists of the IP / subnets on your local network and the Remote LAN.  If the source of the ACL will be your local LAN and destination will be the Remote LAN.

    access-list 101 extended allow ip

    2. is the name given by my partner transfer or I have to create it myself.

    The name of game of transformation is locally important.  However, it specifies the encryption standards 2 phase so this part will have to be coordinated with the peer.

    Crypto ipsec transform-set RIGHT aes - esp esp-sha-hmac

    in the foregoing turn together, RIGHT is just a big local name so you can reference it in a card encryption.  ESP esp-ae-sha-hmac is the part of encryption that should be agreed between you and your counterpart. According to the image that you posted would use you esp-3des esp-sha-hmac.

    3. because I see that the strategy of the first customer VPN (partner) is set on 10 policy should I do also each VPN on 10 policy or the policy number is not serious.

    The policy number is a sequence number and is matched in a top to bottom fashion until a match is found.  If no match is found, then Phase 1 will not end and establish the tunnel.  This is important if you have several peers and some of them use different phase 1 settings.  If this is the case, you will need to use different sequence for each policy numbers.

    4. I have also seen that we have life time security association 2 phases one to use?

    Both are used, and they are both at their default values, you don't need to do any configuration for those.

    --

    Please do not forget to select a correct answer and rate useful posts

  • Cannot add more than one script function to my HTML5 Canvas to animate CC

    I built my project using HTML5 canvas. Everything worked fine until I tried to add a proofreading function to the announcement. Not only it doesn't, actually if I can no longer see the announcement (specifically a gray area appears on the announcement and shows nothing). I was able to add the function stop easily, creating a layer of separate action, make a keyframe and adding the this.stop () to the action.

    The problem when I try to add another code in after it. At first I thought I was just add inefficient code, so I tried to do a simple click to go to the webpage for action, but that would not work either. Any code I want to add this.stop () in addition to the code would kill the ad.

    Does anyone have any suggestions as to why this is?

    Using animate CC 2015.1 edition. Windows 10.

    albertos77769384 wrote:

    function fl_ClickToGoToWebPage_6(event:MouseEvent):void

    {

    navigateToURL (new URLRequest ("http://www.adobe.com"), '_blank');

    }

    It was just the basic action script that should have let me add a link to a button.

    ActionScript does not work using HTML5 Canvas, for what I hope are obvious reasons. There is no such function as navigateToURL() in JavaScript. The equivalent in JS is window.open() to create a new window, or window.location.href = "bla.com" to replace the URL of the current page.

  • Can you add more than one photo for a draw image layer draw?

    I can't seem to find a way to add several photos or photo layer to an image to draw, but the draw on Adobe page seems to imply that several pictures can be added. How would I achieve that? Thanks for your time.

    Unfortunately, the draw is currently limited to a single photo layer and only one photo within this layer.

    Hope that helps,

    Frank

    Engineering drawing

Maybe you are looking for

  • bug fullscreen Sierra

    Alert of potential bug for Sierra. Just upgraded mac mini and when you watch videos (YouTube, etc.) and switch to full screen: the Mac is not in full screen but goes to the lock screen, wanting to connect. I also tried with Ctrl + cmd + f and it does

  • automatic generation of entries

  • c:\windows\uyepozan.dll error message

    Can you help me with system restore.  I tried to find the file but couldn't.  In my view, it can be entered the Trojan horse, but not sure?

  • Installation of Radeon 9800 Pro in Dimension 5150

    I have a Dimension 5150 with 3.0 Intel Pentium 4, 1 GB RAM and Intel graphics. I have a Radeon 9800 Pro a 8300 Dim now deceased and want to install it in the Dim 5150. I have two questions: 1 - is the 9800 Pro compatible with the Dim 5150? (I guess i

  • use the windows key 8 to activate windows 7

    As I bought a windows original 8 and I do not use it, is it possible to use the windows button 8 to activate windows 7? How can I do?