integrated macOS Sierra Cisco IPsec VPN does not work anymore (impossible to validate the server certificate)

Similar Questions

• I use a VPN in AirPort Express. I've updated firmware for 7.7.7 and DNS assigned by my VPN does not work anymore. Upon entry, the icon 'internet' in utility Airpot turns brown, and the internet stops completely. Anyone have any idea?

  Why my internet connection dies? I use a VPN to my internet at home. I put the DNS numbers supplied by the company VPN in my airPort extreme, which, in turn, provides wireless for home. It worked perfectly until I updated to firmware 7.7.7. Suddenly the green light next to the 'internet' in airport Utility icon went Brown, and it is therefore most all internet. I put numbers in DNS to my ISP, and internet provider is displayed again. All the other numbers in DNS, whether it's Google, OpenDNS or VPN to stop the dead from the internet. Anyone has an idea about this?

  Airport base stations, are at best, a VPN-well past that device. It is a server or a VPN client. Upgrade to the latest firmware does not change this fact.

  To create a VPN tunnel using the AirPort Express Terminal, your computer must be running a VPN client that connects to a VPN server somewhere on the Internet. What DNS servers you use should make no difference with VPN.

  If the ISP-supplied DNS servers do not work, I would say that you contact your ISP to find out why they don't allow you to use them.

  What we need to study is more why you lose Internet connectivity when changing the DNS servers of your ISP. Please check with them and to report back, then we can try to help.

• Cisco Anyconnect VPN does not work in windows 7 64 bit

  Hello
  I found that the cisco anyconnect (version 3, any series) does not work in windows 7 (64-bit).
  The vpn is connected, but there is not any internet access.

  I tried to solve the problems of:

  -Disabling the firewall.

  -disable the anti-virus etc.

  But while I tried using with 32 bit, it works very well.

  Also, I found that there is not a specific version of anyconnect vpn for only 64-bit.

  Do any body have the idea how to solve this problem, either it's a bug of cisco vpn itself?

  Certainly, you just need to install a later version of AnyConnect.  You need a Cisco, for example a SmartNet maintenance contract, to download the new versions.

• After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

  After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

  This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

  Thanks, Nick!

  Rick

• My Apple music does not work it takes me to the application once I click on a song it will break the app

  My Apple music does not work it takes me to the application once I click on a song it will break the app

  I had to factory reset my phone twice. So once when I graded down to beta 10 to 9.3.2. One then once more and then my music application has started working again. I hope this helps.

• Single-pass does not work for Web sites after the last update of firefox

  Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

  You may need to exit Firefox and start it again before it takes effect.

  A little luck?

• On another PC I want to save my favorites, but my browser Firefox does not work how can I make the backup, before I reinstall Firefox

  On another PC I want to save my favorites, but my browser Firefox does not work how can I make the backup, before I reinstall Firefox.
  Firefox cannot renew its tabs and now won't run and let me do a backup

  This may be considered to be solve my problem.
  I decided to uninstall the rogue program Firefox download and reinstall the same version (No. 8). I used Windows XP Add Remove programs who asked if I wanted to save the settings of Firefox until I uninstalled Firefox. I said yes and operated with the uninstall. I couldn't find a Firefox 8 so I went for the 12 version and installed on the laptop. This version 12 now works with all the passwords one favorite of the uninstalled 8.
  Thank you for all your help and advice.

• Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

  Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  • Browser.Gesture.Pinch.in -> cmd_fullZoomReduce
  • Browser.Gesture.Pinch.in.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.out-> cmd_fullZoomEnlarge
  • Browser.Gesture.Pinch.out.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.Latched-> false

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• I am now on iOS 9.2 Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the settings, it freezes and then crashes. Please Apple can solve this problem of Game Center iOS 9.2.

  I am on iOS 9.2 and Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the Middle it hangs just. For this reason, I can't back up my data on my games. Please Apple can solve this problem of iOS 9.2.

  Hello Vaishnav,

  Thank you for using communities of Apple Support.

  I see that you are having problems with Game Center on your iPhone. I have a number of things for you to try.

  First force quit Game Center.

  1. Press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. Swipe to the left to find the Game Center app to close.
  3. Swipe up on the preview of the Game Center to close.

  Force an app to close the iOS

  If this does not work, then the next step would be a restoration. I recommend restore like new, without backup restore and everything first. If it works there, you can restore the backup.

  Use iTunes to restore your iPhone, iPad or iPod to factory settings

  Best regards.

• Scanner does not work for all users on the computer Windows 7

  Photosmart 7510 Scanner does not work.  My scanner has the habit of work.   Now it does not for one of the three users on my Windows 7 desktop.

  I spent over 3 hours on the phone with HP.   They had me restart the computer, Plug and unplug the printer, reinstall the software twice under different names. The software depending on what user id, it is installed under allows access to the scanner/printer to one or more users.  The scanner works with Windows Paint software for all three nicknames.

  HP response is that some user control prevents the scanner software, who used to work on all three nicknames on the computer, which now works on one or more of the users.  They couldn't tell me which user control need changing.

  The HP solution is to restore my system when I could scan for all users of three.   I don't want to do that.   Does anyone have a better solution?

  The real problem is HP error messages.   When I click on scan a document, there is no answer.  Nothing happened.

  Then I tried to scan using Windows Fax and Scan.   I got an error message which helped me locate the source of the error.   I was able to fix the problem without creating a new user account.  I had deleted bu error the file MY Document.   Restore this file fixes the problem.

• Automatic update does not work anymore

  My problem is that automatic update does not work anymore and when I try to next turn to the I get some really long file name is missing. I can not down load and reinstall Security Center because it will not only because it is included in Vista. I can't load it updates as the software that is designed to do this does not work. I can't copy and paste the error message due to the fact that I am not given the choice.

  Is enyone knows how to get around this problem.
  The message I get is that Windows does not find:-': {26ee0668-a00a-44d7-9371-beb064c98683}\5\::{36eef7db-88ad-4e81-ad4...     I think that there is more than that, but it does not fit in the window.

  I am running Vista sp1

  Ian Robins, what are the errors that you receive with this procedure? What step gives you access denied? You can attempt to acquire the files listed for a known working machine, but let us try the following:

  It is a simple procedure of rearmament and included are the steps to paste the result of the command prompt, so we read what it gives you:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. At the command prompt, type the following command and press ENTER:

  net stop wuauserv

  net stop bits

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 Catroot2.old

  net start cryptsvc

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

  regsvr32 c:\windows\system32\wuapi.dll

  regsvr32 c:\windows\system32\wuaueng.dll

  regsvr32 c:\windows\system32\wucltux.dll

  regsvr32 wups2.dll

  regsvr32 c:\windows\system32\wups.dll

  regsvr32 c:\windows\system32\wuwebv.dll

  net start bits

  net start wuauserv

  net start Eventlog

  1. Click the icon in the upper left of the window, click on edit, then click on select all, press the Enter key.
  2. By pressing CTRL + V on your keyboard to paste the content in your response.
  3. After a validation or record your response, close the command prompt and restart your computer, and then test Windows Update again.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

  Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

  I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

  Simon

  Hello

  First download the audio driver by using the links below and save the installer to your desktop.

  Audio driver - Windows 7

  Audio driver - Windows Vista

  Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Restore not working - the option to restore on my machine does not work. I've highlighted the dates. Does not work in safe mode

  Original title: restoration works not

  The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.

  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.

  It works for some configurations.

• My cd rom device does not work because its configuration in the registry is damaged, (error Code 19).

  My cd rom device does not work because its configuration in the registry is damaged, (error Code 19). Tried all the easy solutions (update - was active), any ideas? Thank you

  Hello

  ·         What is the accurate and complete error message?

  ·         You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  Race fix from the following link and check if the problem persists:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/929461

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://TechNet.Microsoft.com/en-us/library/cc772156 (WS.10) .aspx