Integrated WLAN not detected on my Satellite Pro M70

Similar Questions

• Satellite Pro M70 - WLAN adapter is not listed in Device Manager

  Hello!

  I just formatted my drive and reinstalled Windows xp and now I can't turn on the wifi. The light is on and the switch is on but it does not work.

  I downloaded all wlan drivers but nothing has worked. In the Device Manager I also can't find any WLAN card. In device manager there is an icon * devices * with a qustion-mark and he said * network control *.
  This is the WLAN card.

  Until I reinstalled Windows it worked fine so the problem is not mechanical.

  Help, please. my laptop satellite pro m70, don't model no psm76e/00e005g3

  Hello

  If the normal LAN card is already recognized correctly need wireless network card, then you should try to install the WIRELESS driver from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, the local network card device can be activated with the hardware switch on the computer laptop and FN + F8.
  Check it!

  Good bye

• Satellite Pro M70: ConfigFree says that WLAN is not enabled

  Hello

  I'm running on wireless on my Satellite Pro M70.
  The WiFi light is orange (yellow), then the communication is running. The internet doesn't work, no problem.

  But when I run the free app Config and search for wireless networks, I get the message "wireless communication is disabled. Enable '.
  I reinstalled the Config Free, but get the same problem.

  It seems that this application cannot see my active switch.
  In Device Manager, the wireless adapter works and indicate the wireless is turned on.

  Clearly, I can seee the networks available through the network of the Systray icon, but I wonder what's the problem with Config Free. Someone at - it an idea?

  See you soon
  Mar

  Hello

  The wireless network must be enabled using the WLan switch and in addition, you need to activate using the FN + F8 key combination.

  But why you are using the ConfigFree to connect WiFi?
  I don t use it in my opinion, that you can simply set the wireless connection using Windows own WLan options or you can use a Wlan as Intel ProSet configuration tool
  Both options are easy to use

• Satellite Pro M70-113: not possible to write on CD - R and DVD-R

  Hello

  I have a Toshiba satellite pro m70-113 laptop.
  Playback problems:
  I'm unable to read cd - r. It's really strange that a few days earlier these CD - R have been reading very well on my drive.
  and when I click on the cd drive in my computer, an error dialog box shows and says f: is not accessible, incorrect function. Here's a screenshot of the error... :
  http://img64.imageshack.us/img64/9574/1bp3.jpg

  And when I try to read my DVD-R, a few times they read very well but sometimes it does not read and the drive LED is lit when it does not read the dvd - r.
  When it reads the DVD-R, the following error message comes: screenshot here: http://img172.imageshack.us/img172/9674/2bc0.jpg

  Write problems:
  After getting reading problems, I tried to test my drive writable.
  And I found that I'm unable to write on cd - r. I used alcohol and Nero once but without success.

  Although the same content when it is burned to cd - rw, it is a success.
  I am able to burn successfully on a support DVD + RW 4 x with data amounting to close to 4.34 GB for DVD5...
  When I insert a DVD - R Virgin car doesn t detects it as a blank media and the keps LED on lighting constantly and if nero State doesn't detect my DVD even! I'm not able to write on my DVD-R media...

  In short: write to RWs is possible for both cd - r and dvd + RW not possible of writing on CD - R and DVD-R.

  Please help me.
  It is only 7 months since I bought this laptop and believe that there may be no other person on this planet who looks after the training better than me!
  Really, I have not much used this drive and never scratched/gradient/local support, only the Supermedium media inserted.

  Thank you

  Hello

  Well, based on your description it sounds like the drive cannot calibrate the lens and, therefore, it of not possible to read or write to these media.
  Usual it of not possible to fix this and the replacement drive is necessary.

  You can also consult the user manual. You will find a list with all supported and compatible media.

  I also found this topic in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13170&MessageID=48243

• Satellite Pro M70-113 does not start up - it hangs at the logo screen

  Hello

  I have a toshiba satellite pro m70-113.

  Sometimes when my laptop turns off mode standby automatically, due to inactivity and then if I press a key on the keyboard to wake up nothing happens and I have no other choice but to it stop completely by pressing the button for 5 seconds.
  But when I restart it works well, that is to say, it starts very well.

  But today, when it is in a similar situation, I restarted the laptop, the screen move after the logo screen toshiba. I have the power on several times, but without success. It crashes just on screen toshiba logo.

  After a few restart I pressed ESC while restarting and the toshiba logo changed to the texts POST bios screen.
  And I found that the text will not go forward after having reached:
  Find disk 0:
  Maybe default feel HDD initialization...
  The captured image is here:
  http://img144.imageshack.us/img144/9986/image007sp2.jpg

  Note: this is a capture when, I don't know how the system has just begun works very well and can be seen that the HARD drive is detected normally this time. While the earlier version, it will not proceed after having reached "Found Disk 0:

  So, the problem is that at the time of the problem, the hard drive was not read / initialized or something like that.

  And I remember that when I tried to reboot my laptop and it did not work. It was running on battery and when I switched power supply that worked.

  So it is a problem that has been fixed in a bet to update BIOS, but for another laptop (see laufendspass post) his link on this forum is here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13143&MessageID=48143

  And my current bios version is 1.1 and an update is available for v1.30... (But I have not yet updated)

  Another problem I had met some time was same this post mentions to be corrected during the update of the bios.
  i.e. "corrected: a computer that is turned on to State power and running on battery power, may crash if the user is connected to the AC adapter while it is start.»

  So, for this, all mean that these problems can be solved by an update of the bios v1.30 which is available for my Satellite m70-113?

  Please answer.

  Hi Ashish,

  The fact that the initial POST process cannot access your hard disk suggests you that there is a possible problem with the drive, maybe he is not in place correctly when power is applied to it. The contents of the disc should be OK, then I suggest you take a good backup of your system (or at least your personal data) If you manage to get your notebook to boot successfully.

  I do not think that an update of the BIOS will affect any on that since the problem does not seem to have a certain 'trigger', and if the BIOS cannot access the hard disk then no matter what version of BIOS you are using.

  Kind regards

• Satellite Pro M70: removal of the USB device causes other peripheral USB does not work

  Withdrawal/use of a USB for a USB device causes devices on USB port to get affected.

  Satellite Pro M70-199 (2 GB RAM)
  Windows XP Pro (SP2) with all updates of Windows installed until end of October 2006.
  This laptop has 3 USB ports.
  An Eicon Diva ISDN USB modem is connected to a USB port.

  When certain devices connected to a different USB port are deleted (even if removed safely with "eject" or "remove device safely", it causes the ISDN modem to file either a double channel (64 k + 64 k) ISDN, or for the ISDM modem to disconnect completely.)

  Cause this include any memory stick USB, MP3 player (ipod and creative zen) and so on.

  Do other devices, such as USB external hard drives & sometimes external DVD USB drives, and sonetimes do not produce this problem.

  Is this a known issue?
  If it is a hardware interrupt problem, how to solve it?
  This problem is related to the modem and the laptop?

  As a note, in addition, intermittent (random) times (cannot reproduce all the time, but it happens once or twice a day) when a USB device is accessible it causes the modem USB ISDN to drop a single channel, even if the lights on the modem still show it as it is connected. In this case and the case above, the only way to get the modem ISDN USB running again is physically disconnect and reconnect.

  The reason why it is a crucial issue is that:
  (1) the modem speed is halved or disconnected
  (2) the ISP continues to full rate for a double load connection even if a channel has been dropped.

  Any help will be greatly appreciated.

  Here is some information on USB devices, followed by some information about IRQ settings.

  Driver date 01/07/2001
  Version of the driver 5.1.2600.2180
  Driver provider Microsoft
  File INF usbport.inf

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  Location Information PCI bus 0, device 29, function 0
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 23
  Port 1800-181F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  Hardware ID PCI VEN_8086 & DEV_2659 & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 1
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 19
  1820-183F port

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  Hardware ID PCI VEN_8086 & DEV_265A & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 2
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 18
  Port 1840-185F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  Hardware ID PCI VEN_8086 & DEV_265B & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 3
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 16
  Port 187F-1860

  Description of the driver Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  Date of the driver 06/01/2002
  Driver Version 5.1.2600.0
  Driver provider Microsoft
  File INF usbport.inf
  Hardware ID PCI VEN_8086 & DEV_265C & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 7 function 29
  PCI Device Intel 82801FBM ICH6-M - Enhanced USB2 Controller [B-1]
  Device resources
  IRQ 23
  Memory B0000000-B00003FF

  Description of the device resource sharing
  DMA 04 exclusive Direct memory access controller
  IRQ 00 exclusive system clock
  IRQ 01 exclusive Standard 101/102 key or Microsoft Natural PS/2 keyboard
  IRQ 08 exclusive system CMOS/real time clock
  IRQ 09 shared system compatible ACPI Microsoft
  IRQ 11 shared Intel (r) 82801FB/FBM SMBus Controller - 266 a
  IRQ 12 exclusive pointing Alps-device
  IRQ 13 exclusive Numeric data processor
  IRQ 14 exclusive Primary IDE Channel
  IRQ 16 shared generic CardBus controller
  IRQ 16 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  IRQ 16 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2662
  IRQ 16 shared Mobile Intel (r) 915GM/PM Express PCI Express Root Port - 2591
  IRQ 16 shared ATI MOBILITY RADEON X 700
  IRQ 17 shared Realtek AC97 Audio
  IRQ 17 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2660
  IRQ sharing 17 Texas Instruments PCIxx21 Integrated FlashMedia Controller
  IRQ 18 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  IRQ sharing 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
  IRQ 19 shared host controller Standard SD compatible SDA
  IRQ 19 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  IRQ 19 shared Intel 82801FBM Ultra ATA Storage Controllers - 2653
  IRQ 20 shared of TOSHIBA software modems
  IRQ 21 shared Realtek RTL8139/810 x Family Fast Ethernet NIC
  IRQ 22 shared Intel (r) PRO/Wireless 2200BG Network Connection
  IRQ 23 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  IRQ 23 shared Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  

  Post edited by: sakhri

  Hello

  I have Satellite M70-159 and I didn t notice any strange problems with the USB ports. I use a few of them as printer, webcam, USB, memory stick, optical mouse, and external HARD drive. The devices are recognized correctly and I always remove without option delete without danger.

  Now I have Vista pre-installed and there is no problem so far. If I understand you right USB ports work fine but there is problem with USB modem only. Am I wrong?
  Also try to contact the producer of modem support. Is perhaps the question like this known and if all goes well, they have a logical explanation.

• Satellite Pro M70: Configfree and Wlan with WEP issue.

  I have a Satellite pro M70. With Configfree (v5.90.07), I can connect to the wireless network (with SSID) of my router and go to the internet. But when I put a WEP key in the router, and then I can not connect anymore.
  With Configfree, wireless Lan, I still can't see the network (with the name of the SSID, etc.) and I see that the network is secure. But I can't connect to the network more. This because the laptop adapter (Intel 2200BG) doesn t have the WEP key. My question is: How can I set the WEP key in Configfree? (A different key by different profiles).

  (Try to solve the problem I have downloaded the new Intel and IntelPROSET wireless drivers.) This live program asked the WEP key and makes a link without problem. Now with Configfree, Wireless LAN, I also see a connection (secured with WEP). But the rest of the Configfree program does more (CFMain.exe problem). I read in another topic that this is caused by the Intel program. You must remove this to solve the problem of Configfree. So this n t the solution.)

  My question is: How can I set the WEP key in Configfree? (A different key by different profiles).

  Hello

  Firstly the Toshiba Configfree program is not software for the WLan configuration.
  This program, you can use for the diagnostic procedure and it shows you the connection properties. But it of not possible to set the cipher with the Configfree.
  It seems that the IntelProset utility has a bad influence on the Configfree. The problem is that Toshiba doesn't support any 3rd party applications.

  Furthermore if this card doesn t WLan supports WEP encryption so you can not use it.
  WEP encryption, you can set in the WLan card properties.
  You also use the 3rd party WLan application like IntelProset or Atheros utility to configure the WiFi network but encryption depends on the WLan card not on the utility!

• Satellite Pro M70: Unable to connect to the WLan with ConfigFree

  Salvation in the Forum.

  I have problems with a satellite Pro M70, about gaining control of wireless connections.

  When I scan with "The Radar" I have ConfigFree for available wireless accesspoints, I get several points available, but it is not able to connect to one of them. I can read their status and see their marker of WEP encryption.

  When I try to connect to one of them, I get a pop-up dialog, that said (translated from Danish) 'suppliers another software is in control of the wireless network card. When you try to configure a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  Is the unnamed "other provider" associated Windows or perhaps associated McAfee (Security Suite 2007)?

  If you are familiar with this problem or something like that I'd be please to know.

  Also - where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers?

  > Trying to make a connection through the classic way to windows, windows States that "windows is not able to configure this wireless connection - if you have another program to manage wireless connections, you must use it". I guess it refers to ConfigFree...?

  It should not be a ConfigFree. According to you, an Intel ProSet utility or a Client Atheros wireless network adapter might be controls the Wlan configuration!

  Please check if one of the two control the WiFi network tools and turn off!

  > where can I enter keys for WEP encryption for my friends in ConfigFree WLAN routers

  You should have three different tabs in the utility Configfree.
  The second device settings provides the list of devices, and you should see the wireless network connection.
  Choose and use the button network connections.
  There you should find some encryption settings!

  Also check the profile settings tab and the option called security settings

• Update of the BIOS works is not on Satellite Pro M70-275

  Hey

  Im having a problem, I can not update my bios, I downloaded the right bios file, but when I try to update I get a bsod just until it begins to Flash the bios.

  The biosfile I downloaded is:

  ARKive
  Satellite pro
  Satellite pro M series
  Satellite pro M70 (PSM76)
  PSM76E

  Its the bios 1.70 for win xp

  IM also of problems with my sound, I downloaded the rather and installed, but there is no sound.

  IM using Windows XP SP3

  Concerning
  Lars

  Hello

  BIOS update is necessary? Or what is the intention to update the BIOS?
  Usually if you have some serious problems, the BIOS isn't essential update

  With regard to the sound:
  You can solve the problem in Windows XP, install the KB888111 and KB835221 hotfix before you install the audio driver.

• New DVD drive not recognized on my Satellite Pro 4600

  Hi all

  I recently bought an engraver of DVD in NEC ND-6650 nine.
  This drive is NOT recognized by my Satellite Pro 4600 at all - neither Windows 2000 nor in the BIOS (v 2.60). BIOS updates higher than the 2.60 version are not provided.
  Does that mean I can forget about using the new writer in my old notebook?

  Thank you and best regards,

  Nils

  Hi Nils,

  I suspect that your new drive may be not be compatible with your laptop. Like all scanners to your new drive will be configured as slave or master (or CSEL possible), and this configuration should match your laptop.

  Usually your hard drive is configured as master on IDE channel 0 with optical drive is the slave on the same channel device. However, you may find that your optical drive is configured as master on the IDE 1 channel.

  Normally the setting is preconfigured by the manufacturer so you will need to check both the conficuration of your new drive and the configuration of your original drive to make sure they are the same.

  Kind regards

• Satellite Pro M70: Software does not remove

  I have a new Satellite Pro M70 and when I add or remove programs, it will not work. I select the software I want to delete and nothing happens. There are no popup message to indicate an error, no hourglass to tell that it is running, freezes it just add or remove. Someone at - he seen this before?

  Hello

  Maybe this application runs in the context of the operating system and so you can't remove it form the "adding / removing programs.
  Please check the the Task Manager for this application.

  The second possibility is that the registry entries are damage and/or files are missing which are necessary to remove this program.
  In this case, you should try to install this program, then remove it.

• Satellite Pro M70 - USB port does not recognize the device

  My Satellite Pro M70 has three USB slots, one on the left and two (vertically one above the other) at the back of the laptop.

  The top slot to USB in the back started giving problems. Sometimes, my computer can't see all that I plugged in there. But if I unplug anything - usually the printer or the mouse - the computer will usually see it then.

  What is the problem? Can do nothing about it?

  My operating system is XP. and my laptop is 4.33 year.

  Thank you.

  Hi Mannix,

  Have you already updated the chipset drivers?

  I read in the forum about these questions and normally helps to reinstall the chipset driver. :)

• Satellite Pro M70 does not read the DVD of some manufacturers

  Recently, my Satellite Pro M70 stopped reading some DVDs, specifically verbatim...
  When I put in, it is just to see any disk. If I put the same disk into any other computer, even my friends Toshiba Satellite Pro M70 - than mine, even it reads normally.

  Any ideas?

  WEIRD laser could be at fault, or it is maybe dirty. Try to clean the lens with a Microfiber cloth.

• Satellite Pro M70 and (not) working with projector

  Hello

  I have a Satellite Pro M70 (model PSM76E-00100KEN), and when I connect it to all a projector, it appears via the projector is the image of the office.

  The laptop continues to work OK, but the projected image never changes the background image I have on the laptop.

  On the power of the laptop Windows XP logo comes at a time, but then other changes of the display appear on the laptop.

  It has ATI mobility Radeon X600SE graphics card. This card allows 2 screens and when I activate it it starts flashing number 1 on the cell phone and number 2 on the projector, but still shows only WinXP only on the laptop.

  Any ideas on how to get the two to work together?
  Thank you

  Search on 'M70 TV' out using the box at the top of this page. You will get useful advice.
  A +.

• Satellite Pro M70 overheats and turns off

  Need to support some tech with this problem.

  Satellite Pro M70 constant over heating problem. After use of 20-30 minutes of normal (web navigation etc.) the bottom of the laptop becomes really hot near the fan, unbearably hot to the touch.
  If I play games or do whatever it is cpu-intensive, it will end by the smell of the burning and power off.

  All this time the CPU fan never turns! Just lets him get more hotter and hotter. Strange thing, that's when you start first upward, the spins of CPU fan for about 5-6 seconds to make it work! Already tried to clean it, was not very dirty, the fan is not stuck, it runs if you blow...
  Update I tried to the latest version of the BIOS overheating again...
  Tried all the toshiba utils for cpu temp monitoring etc., they indicate the CPU get more hotter and hotter much more of 60 c +, but none of them (or other 3rd party utils) can detect the fan...!

  Fix for that or is it just bad fan / design of the temp sensor?

  > Already tried cleaning...
  Yes, but how did you do that?

  In the past, I have separated three Satellite M70 notebooks and was surprised inside, how much dust has been placed behind the cooling rack. After notebook professional cleaning was much quieter and has been properly cooled.
  Maybe the grease thermal CPU and graphic should be replaced also.
  After a long period of use, it seems quite dehydrated.