integration of lync 2013 with cisco vcs - c

Similar Questions

• OpenSSL with 'Cisco VCS Certificate Creation and use - deployment guide. "

  Hi team,

  To prevent users to log on with the VCS Highway, we want to use OpenSSL (version: 1.0.1p 9 julio 2015), but I am facing the following problem:

  1 - I can't implement the command "touch index.txt".

  2 - I can´t implement the command "openssl genrsa-aes256-out private/cakey.pem 4096"; and when I apply these commands I get "OpenSSL is not recognized.

  I did all the steps that says "VCS certificate creation and use Cisco".

  What could be the matter?

  Thanks for your advice.

  Kind regards

  Bill

  Already explained why touch does not, simply create the .txt through windows command file.

• Integration of Lync B2BUA and presence

  Hello

  I try to get the presence working between Lync and VCS. I use Findme exposed in Microsoft OCS 2007, Lync 2010, and Cisco VCS methodology

  Deployment Guide Cisco VCS x7.1.  We use x7.1 and we have a dedicated control of VCS and a second dedicated VCSLyncGW, we use the running 4.2 and 5.1 codec C20. We have followed the guide and all end points in a subdomain that Lync would start to VCS for the endpoints that are not configured with Findme accounts.

  Presence seems to work as it should for staticly assigned endpoints, but for the endpoints findme we can't operate the presence. Calls will work very well between Lync Clents and endpoints are configured with Findme accounts.

  When I go to VCSLyncGW and look under the OCS/Lync user status it shows the uri "findeme" with a State of the presence of 'offline' but his 'seat' and 'subscribe '.

  I made sure that the account of Lync was first Setup and connected to her waiting 10 minutes before setting up the account findme.

  Tips on how to solve the problems?

  Ryan,

  did you do that to combine devices in these accounts, using the URI FindMe ([email protected] / * /)?

  Could you maybe post a screenshot of one of the accounts FindMe, showing its features and places?

  The presence server is enabled on the VCS of GW Lync and not the other control VCS?

• iOS 10 with Cisco Jabber

  Dear Cisco support community,

  as seen on http://www.apple.com/ipad/business/work-with-apple/cisco/

  Only the spark is described here. There will also be a better integration of the call with Cisco Jabber?

  Spark.PNG

  

  According to me, they're trying to transmit only apple ios 10 best interactive aura to the customer of the spark. This does not mean that jabber for iphone will be less functional in ios 10.

• Integration with Lync 2013 SX20

  Hi, we can integrate a stand-alone end SX20 point with Lync 2013 to make video calls point to point between SX20 and Lync client? VCS control is required between Lync and SX20?  Can anyone help me with any document or on this link?

  No, at this point, a SX20 cannot communicate directly with Lync.

  You will need a VCS running at least version X8.1 of the software.

  The VCS and the Lync Deployment Guide may be of interest to you: http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/X8-1/Cisco-VCS-Microsoft-Lync-Deployment-Guide-X8-1.pdf

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• 3610 C & Lync with AMGW VCS integration-

  Hello

  I have a client interested in integration of Lync with an AMGW-3610. He wants to use the AMGW for calls of some but not all. I wonder if there is a way to differentiate (prefix?) throught AMGW calls and other calls (direct media between Lync and endpoints) and to "create 2 different routes?

  With regard to the way in which the integration of the LYNC/VCS works I don't think that it is possible, but maybe I missed something...

  You have an idea if it is possible and how to do this (and any restrictions)?

  Thank you

  Best regards

  François

  You should be able to do it on the VCS under Applications > B2BUA > Microsoft OCS/Lync > transcoder policy rules

  Have an allow rule for the uri that you want to use the AMGW and a default deny to a lower priority to stop all

• Cisco VCS Lync Interworking with Lync Server/multiple domains

  Unfortunately I don't find any reference in the guides of deploymend, if it is possible to master several server/domains on a single VCSE lync. Is there a way to gather environments different lync with a vcs? For example, interoperability with clients a and b, which have completely separated from lync environments.

  We wanted to master it with VCSE, or is the Microsoft key option only avalible for VCS?

  Thanks for the reply.

  The Deployment Guide says you should use a VCS-control, not a VCS-Highway to serve as gateway of Lync.

  I don't think I have several B2BUAs connect to Lync on a single VCS - you would need to have a separate VCS for each Lync environment (IE, one for the customer) and another for client B and search rules appropriate to direct traffic areas in the right direction.

• Cisco VCS and integration Lync2013

  Hello!

  Could you tell me please, when CISCO officially support Lync2013 - free new software for VCS - C and documentation on integration?

  The main interest is the possibility of transferring video between CISCO/MCU and Lync endpoints on the H.264 Protocol, who hails from Lync2013.

  Right now, I've got VCS - C and RTM Lync2013 X7.2. During the video call without AMGW appeal established as audio only.

  When using with Lync2010, it worked on Protocol H.263 and CIF resolution.

  Evgeniy salvation,

  We are currently investigating the possibilities to achieve interoperability between Lync 2013, VCS and video devices on the side of the VCS standards-based, it is a work in progress and at this stage, it is to early to provide any factual information on when interop will be available.

  In contrast to Lync 2010, Lync 2013 does not support H.263 for video and it so that will remove the OCS/Lync integration. I do however think that you should be able to make a two-way video between Lync 2013 and VCS-joined endpoints if you use an AMGW tried that yet?

  Thank you

  Andreas

• Doubts about the migration parallel to Lync 2013-> Skype4B 2015 on VCS - C (not clustered)

  Hello everyone!

  As I saw on Cisco documents, applying "B2BUA/Microsoft Interoperability" on VCS can "communicate" with just an instance Microsoft Lync pool servers, but we need to migrate the Lync server on parallel to the servers of Skype, we need to have a few "maintenance window" to migrate all users!

  Can we keep 'UP' communication for VCS (lync and Skype) pool of two servers until the end of the migration? The lync Server legacy 2013 (shared resources) with VCS today can communicate with users (migrated) for 2015 of Skype with trunk Lync existing TLS today?

  I think we generate another certificate for TLS and affecting some Skype server on the option "host approved", that's okay, I forgot something? Or I have other ways to communicate two pools Microsoft server with a VCS - C with the application "B2BUA/Microsoft Interoperability?

  Thanks for help me!

  To see some possible examples of deployment options, refer to Appendix 3 of the infrastructure Microsoft (X8.8) Deployment Guide and totalled, suggest that you also look over the guide in full as it might answer some of your questions about what is supported.

• VCS & integration of Lync

  Hi all

  I have question for integration of lync. For example;

  I have a domain for vcs to cisco that is named vcsc.vc.abc.com in vc.abc.com.

  and I have another domain for lync, abc.com.

  Can I use my a vcs also gateway lync with the same name?

  I did the configuration of lync side according to the document and all certificates.

  I tried a vcs as a gateway to lync

  Finally, I have some errors in the VCS status page

  VCS is alive but LYNC gives errors for me which is unknown failure.

  Any thoughts?

  Kind regards

  Hello

  According to the VCS-Lync deployment guide:

  Be careful when you design your deployment that you do not have multiple gateways by field of Lync, is more than a field of Lync by gateway. There is a walkway VCS (or cluster) in one area of Lync. It is possible to configure several areas Lync, as long as you have an independent gateway serving each. You cannot configure several Lync areas with only one gateway Lync VCS serving all the. You should avoid to configure multiple gateways to serve a single domain of Lync. With this deployment, calls for a video endpoint to a different video endpoint that is called through its area of Lync will get routed via Lync, rather than directly through the collaboration infrastructure. Duo video, end camera control and possibly encryption and the video quality, users could lose.

  HTH

  Manish

• Cisco Security Manager integration with Cisco ACS troubleshooting

  Hi all!

  I have a problem with the integration between Cisco Security Manager and ACS. I've done the integration, but the identity of the user system doesn't have enough privileges. I know what the problem is, but I don't know how I can change the login of the ACS to the local MSC?

  I found a file that specifies the following:

  Q.

  Is there a backend script or command line interface options to change the ACS to local CicsoWorks connection module?

  A.

  To restore the server LMS ACS local user mode mode, stop the CiscoWorks

  demons and run the following script:

  NMSROOT/bin/perl ResetLoginModule.pl

  (for Solaris)

  NMSROOT\bin\perl ResetLoginModule.pl

  (for Windows)

  Then, restart the daemon.

  I did it, but does not work, any idea?

  Hello

  I guess you can try to go through the question on WSC and GBA integration troubleshooting:

  http://www.Cisco.com/en/us/docs/security/security_management/cisco_security_manager/security_manager/3.0/troubleshooting/guide/rbacts.html#wp1043629

  Few things might have gone wrong:

  1 - this command must be run on the server MCS cmd prompt (make sure that you are not on the client computer)

  2 - NMSROOT is the directory were MSC Server is installed. Is usually c:\Progra~1\CSCOpx

  3. you must stop the deamon Manager before performing this action (and restart)

  For example if the directory is the one above to reset the connection locally, you can try the following:

  net stop crmdmgtd---> that stops the daemon Manager (can be done by the services window)

  c:\Progra~1\CSCOpx\bin\perl c:\Progra~1\CSCOpx\bin\ ResetLoginModule.pl---> restores local authentication

  net start crmdmgtd---> restart the Daemon Manager

  Can you maybe try again and let me know how it goes?

  Thank you

• Lync 2013 VDI Plugin does not work in Windows 8 with view Horizon 5.4

  Hi all

  I start this new thread as it appears by getting the Lync 2013 VDI Plugin works in Windows 8 is going to be different from that of Windows 7 SP1 and Windows 2008 R2.   The original on Windows 7 and Lync thread is posted here: http://communities.vmware.com/thread/446960?tstart=0

  Here's what I tested and I can determine:

  PC/computer laptop/point of customer #1 endpoint (Client light 10Zig):

  Windows 7 SP1 32-bit

  No installed Office

  Lync VDI 32-bit plugin

  View of the horizon 5.4

  PC/computer laptop/point of customer #2 endpoint (desktop PC):

  64-bit Windows 8

  2013 32-bit Office installed, but the Lync 2013 desktop client is NOT installed

  Lync VDI 32-bit plugin

  View of the horizon 5.4

  VM:

  64-bit Windows 8

  Office 2013 32 bit installed

  Horizon Feature Pack 2 is installed

  Audio redirection works, but the web camera does not have to be picked up.  Its a HD LifeCam Microsoft and is supported by Lync 2010/2013.  I checked the VDI connects to the virtual computer and it seems the plugin Lync VDI successfully syncs.  However, I'm never invited to re - enter my credentials of Lync as I do Windows 7/2008 R2.  In addition, I don't see the 'two PC with the green check mark' in the lower right corner of Lync.  Who should be present after a successful synchronization of Lync VDI.  In fact, there no icons in the lower right corner at all.

  After some further reading, I decided to download and install Skype through shop Windows.  Also, it does not recognize my camera.  In my opinion, the Feature Pack is perhaps the issue here, but I don't know how to dig one more away.  TonyHuynh201110141, any ideas?

  I had a co-worker for his Mac with the new client View 3 trial and Lync VDI works as expected.  I tried again on my side and noticed that it takes exactly 5 minutes to make me a successful pairing.  I remove the Lync VDI plugin, then reinstall to see if that makes a difference.  At least I know that two important data points:

  1 Lync VDI still works

  2. the issue was on only my endpoint device.

  I will update the thread once I know more.

• Lync 2013, what is the solution

  To date, Lync 2013 is compatible in some way?

  If a customer makes a migration from 2010 to 2013, runs out of service?

  How long Cisco solve this problem? Hello and thank you all

  One step could be to say to your customers to complain to the 'provider' they always change

  things for the worse, I don't see a real reason why they had to remove h.263. And if they change things why

  they should not be able to support a standard way of h.264...

  We tried at least with the customer of 2013 and which works with the advanced media gateway.

  It will depend on what hardware you have in your network.

  As it comes to the topic future ware, you couldn't get a straight answer here in the Forum.

  I recommend you talk to your Cisco contact to get some information under the NDA.

• Bad_Pool_Header BSOD on several PC randomly after installing Lync 2013

  We just deployed Microsoft Lync 2013 in our Organization.  In fact, we have about 18 machines Windows XP left so they Lync 2010, but on 100 machines Win 7 with 2013.

  Since this installation, there were a few random BSODS multiple computers and they are usually BAD_POOL_HEADER and it refers to two files, ntoskrnl.exe, and win32k.sys.
  That they come from different machines, it cannot be the corruption of the local memory.  If it's a particular machine I would exchange the RAM, but it is not that.
  Windows 7 Pro 64-bit machines.  Office 2010 32-bit.  The last change is Lync 2013 15.0.4517.1004 MSO 15.0.4517.1005 32-bit.  Before deploying Lync 2013, I did have one of these reports.
  The BSOD is random.  Not necessarily the same PC every day.  Maybe 3 or 4 BSOD's a day from different people.  But you really try to determine what is happening here until things get worse.  Also, we run Vipre Antivirus Business.  It is configured to exclude *. OST files, just to help the stability of Outlook 2010 for those who use laptop computers in cached mode.
  Any idea?  I've been collecting dump files.
  Thank you!
  MODULE_NAME: nt

  FAULTING_MODULE: fffff80002a4a000 nt

  DEBUG_FLR_IMAGE_TIMESTAMP: 5147d9c6

  BUGCHECK_STR: 0x19_20

  POOL_ADDRESS: fffff900c093e000

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from fffff80002bf2cae to fffff80002abfc00

  STACK_TEXT:

  fffff880 '0920cdb8 fffff800' 02bf2cae: 00000000'00000019 00000000'00000020 fffff900 'c093e000 fffff900' c093e840: nt + 0x75c00

  fffff880 '0920cdc0 00000000' 00000019: 00000000 00000020' fffff900 'c093e000 fffff900' c093e840 00000000'25840000: nt + 0x1a8cae

  fffff880'0920cdc8 00000000 00000020': fffff900 'c093e000 fffff900' 00000000'25840000 00000000'00000000: 0 x 19 c093e840

  fffff880 '0920cdd0 fffff900' c093e000: fffff900 'c093e840 00000000'25840000 00000000'00000000 fffff900' c093e840: 0x20

  fffff880 '0920cdd8 fffff900' c093e840: 00000000'25840000 00000000'00000000 fffff900 'c093e840 fffff880' 0920cf20: 0xfffff900'c093e000

  "fffff880 '0920cde0 00000000' 25840000: 00000000 ' fffff900 00000000 'c093e840 fffff880' 0920cf20 fffff880 ' 0920cf10: 0xfffff900'c093e840

  fffff880'0920cde8 00000000' 00000000: fffff900 ' c093e840 fffff880 '0920cf20 fffff880' 0920cf10 fffff800 ' 02ac8d32: 0 x 25840000

  STACK_COMMAND: kb

  FOLLOWUP_IP:

  NT + c 75 00

  fffff800'02abfc00 48894c 2408 mov qword ptr [rsp + 8], rcx

  SYMBOL_STACK_INDEX: 0

  SYMBOL_NAME: nt + c 75 00

  FOLLOWUP_NAME: MachineOwner

  Nom_image: ntoskrnl.exe

  BUCKET_ID: WRONG_SYMBOLS

  Follow-up: MachineOwner

  It seems that the PC that had the problem had a fntcache.dat of different size, so if that were the case, hopefully regenerating the fntcache.dat will fix the problem.

• MMIC access after integration of series C with UCS Manager

  My question is on the following terms:

  This guide contains information and procedures for installing Cisco UCS C200, C210 and C250 servers for integration with Cisco UCS Manager version 1.4 or 2.0.1.

  Cisco UCS C-Series-Rack mounting servers are managed by the autonomous integrated software, Cisco (CIMC) integrated management controller. When a series C Rack-Mount Serveris integrated with Cisco UCS Manager, the MMIC manages nor the server. Instead, it is run with the Cisco UCS Manager software. You'll control the server using the Cisco UCS Manager or Cisco UCS Manager CLI user interface.

  This means that you literally can't website to the graphical interface of MMIC?  Or means that, although you can still access the MMIC, the management of the C series is recommended to run through the UCS Manager?

  They are mutually exclusive?

  Thank you

  Amir

  That's right, all the features are moved to Service UCSM profiles and can't do anything of CIMC.

  CIMC will report "managed by UCSM" or something like that.