integration of OpenManage for vmware

Similar Questions

• OpenManage for VMWare ESXi has no possibility of tasks of virtual disk

  OMSA v 7.1 and 7.2 for Windows (and earlier versions) allow the user to perform many tasks on virtual disks, including reconfiguring - expand a RAID array with a new drive.

  This is not true for managing open for VMWare ESXi - although you can monitor the status of the RAID and disks with the browser of the OMSA interface type, you cannot perform tasks - can not even make a high beam Flash.

  It is a huge problem, because the PERC controllers (H700 and H800, for example) don't allow you to develop virtual using hard drives not Dell disks when you try this during startup in the bios.  (These controllers only allows you to create new virtual disks using drives not Dell).

  This test was conducted using the latest firmware (12.10.4 - 0001 A10) and drivers for the H700 and H800 and multi-server r610 ESXi 5.1.

  Other people with VMWare have been affected by the present?  The only solution is to have two player networks connected to the computer, and create a simple Windows with OMSA, boot in Windows Server to expand the table using OMSA for Windows.

  I would be interested in the comments of others, including those of Dell.  We spent hours on the phone with Dell; This seems to be the only solution.  (Yes, Dell released a firmware version last year that has ceased blocking non Dell readers, but it only works for the creation of a new virtual disk, do not expanding one existing).

  Yes.  It came through a discussion in the Dell | Servers | Discussion of the RAID community.

  en.Community.Dell.com/.../20263442.aspx

  There is a CD bootable linux called OMSA Live that you download from PowerEdge (linux OS) systems management.

  This OMSA PERC H700 and H800 control and allows you to do everything.  When you reconfigure the RAID and the PERC card starts the reconstruction, although it seems risky, you can restart under VMware and the reconstruction of the RAID continues on.  And you can analyze with OMSA for VMware.

• Problem installing OpenManage for VMWare vCenter integration

  Hello

  I'm trying to use Dell OpenManage integration with VMWare vCenter and have downloaded and deployed with the OVF file.  The virtual machine appears to have installed correctly and I recorded 2 servers by IP address vCenter.  I can connect to the DellAdminPortal page and sign in.  In the Administration Console under vCenter record I see two vCenter server and I get the message

  Success

  The vCenter 172.17.1.30 has been saved successfully. Open a new client vSphere for vCenter 172.17.1.30 so that the changes can be implemented.

  However when I connect to my with the Web Client vSphere vCenter I don't see the icon Dell OpenManage integration under the Administration category.  What Miss me?  I also checked the Administration-> have management and I can only see vCenter Orchestrator, Log Browser and SSO Admin UI Plugin.  About Dell OpenManage.

  I have connected several times and have even restarted the VM OpenManage, but nothing appears.  Any suggestions on what I can do to get this race?

  Thank you

  Scott

  Our web customer support is for vSphere 5.5 only. Please make sure it's the version of vCenter that you run.

  "If you are on 5.5 check if there are two plugin files in C:/ProgramData/VMware/vSphere Web Client/vc-packages/vsphere-client-serenity /" If there is, we have seen that removing the oldest file and restarting the blank Server fixed this issue.

• Host for vmware integration tools

  where can I download the host for Vmware integration tools?

  the support site are not providing the relevant download

  https://eqlsupport.Dell.com/support/download.aspx?ID=3199

  Klick on VMware integration or eqlsupport.dell.com/.../download.aspx

  Its a set of programs. Most likely, you are looking for the MEM (Module of Extension Multipath) and VSM (Virtual Storage Manager), formerly known as the ASM/VE. The last is the "plugin" for the connection between your group EQL and vSphere vCenter. His only usable in the 'new' WebClient vSphere and not for the old c# one.

  Kind regards

  Joerg

• x 4012 MTU for VMware NSX

  Hello

  I am looking for two 10 GB switches to low price without perfomance high-end to create an environment of demonstration NSX. VMware NSX has only one requirement difficult and an option for the integration complete.

  A 10 GB of Dell switch x 4012 would comply with the following requirements:

  • MTU > = 1600 (for the encapsulation of packages)
  • Support IGMP (HA hybrid mode but optional in our test configuration)

  I'm not able to find a reference in the documentation of these two characteristics.

  Thanks in advance for the help!

  If you have another idea or suggestion, feel free to contact me.

  Hello

  It does not meet the requirements for Vmware NSX.

  Page 473 http://downloads.dell.com/Manuals/Select/networking-n4000-series_User%27s%20Guide_en-us.pdf

  Console #config

  Console (config) #system jumbo mtu 9216

  Page 847 shows the configuration for IGMP.

• Assign 1 NIC purely for VMWare Workstation

  Hi all

  I recently gave me a Z1 HP Workstation PC for my office.

  It is an integrated wireless and wired connections.

  What I would do, is use the wireless purely for VMware workstation 7 and connect it to our test card WLAN to provide connectivity to the outside (for the windows updates, etc.).

  Then use the wired connection, to connect to the domain network.

  Anyone know if this is possible? I can't find much info about him.

  Any help would be appreciated.

  Thank you.

  Good then you have to try to work around the problem.

  The host WiFi network adapter, let all IP6 verified but protocols and then manually set the IP4 address to a 169.254.x.x address while retaining the good mask subnet, default gateway, and DNS for the LAN router.  It comes in a way that is known to work however, it is still dependent on how the wifi adapter and the WiFi router manages normal communications.  If it works, what it does is to allow the virtual machine is to use the VMware bridge Protocol but the 169.254.x.x address stops the host itself to use.  Other normal settings for good subnet mask, default gateway and DNS servers for the LAN router has been know to turn on the bypass, which will take place on a WiFi network card and or WiFi routers.  In some cases, make what you want may have to be done via wired Ethernet, if a WiFi solution cannot be implemented.

  If it does not we know as there may be other things to try with the WiFi before you have to implement a wired Ethernet solution.

• Microsoft System Center Operations Manager Pack for vmware view?

  According to the link below, there is a vmware view management pack available for MS operations manager:

  http://blogs.VMware.com/view-point/2010/08/view-45-modernizing-the-Windows-desktop.html

  Where can I download this? I was not able to find it in the download portal.

  This package is actually available on the login server view itself once you have it installed.

  Information on integration with SCOM is found beginning on page 51 of the Guide found here VMware View integration:

  http://www.VMware.com/PDF/view45_integration_guide.PDF

  -Mike

• do I need Windows PowerShell integrated scripting tool for home computer and access to the internet, powershell

  do I need Windows PowerShell integrated scripting tool for computer and internet access

  No you didn't he need for home computer and internet access

• If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  If I have a macbook but parallel platform for vmware to run windows for mac, how to make the windows side to recognize the connection wireless from my mac

  Hello

  -You use Boot Camp as the Boot Manager? If so, make sure that all boot camp for Windows 7 drivers are installed.

  -You receive an error message?

  If you use Boot Camp, I suggest yo 1All operations from the below mentioned link and check if the problem persists.

  Boot Camp: Windows 7 Installation, frequently asked questions

  http://support.Apple.com/kb/HT3986

  For reference:

  Support for Boot Camp

  http://www.Apple.com/support/Bootcamp/

  Hope this information helps.

• Free BSD for VMWare Virutal Machine image

  Hello everyone

  This is my first post in any VMWare community forum and I would advice to take advantage of ready-made virtual machines available on the FreeBSD site:

  ftp://ftp.freebsd.org/pub/FreeBSD/releases/VM-IMAGES/10.2-RELEASE/amd64/Latest/

  This page from the same site indicates the hard image for VMWare, but my last copy of VMWare Workstation 12 player accept files .vmx or .vmc - not hard:

  ftp://ftp.freebsd.org/pub/FreeBSD/releases/VM-IMAGES/README.txt

  Is this mean that hard images can be loaded into other paid products VMWare?

  I look forward to receiving tips.

  Thanks in advance

  Ah, you use the drive, I just read the part of the workstation

  OK, so, here we have to work around the problem. Create a virtual machine, the select part to store the disk in a single file and not split disc.

  When you create, delete the newly created hard.

  Copy the VMDK you downloaded from the website of bsd in the VM folder and rename the hard on behalf of the deleted vmdk.

  Tim

• Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Only a single vCenter Server Heartbeat license is necessary to protect the components of the vCenter Server installed remotely, including SQL Server. A single license is also used for several UNIQUE for vCenter Server services protected authentication servers. A license is required per instance of vCenter Server.

• Problem with the video for "VMware vSphere Hypervisor - install and configure.

  Hello

  In this page: https://my.vmware.com/group/vmware/evalcenter?lp=default & p = free-esxi5

  When you click on the "Installation and configuration" tab, we have access to videos for vSphere Hypervisor.

  But at the moment, none of the video can be shown.  I tried this in my computer at home as well as my company computer and none works.

  Someone who works for VMware please check this problem.

  Thank you

  OK, I just found what was "wrong".  These videos are "optimized" for Internet Explorer!   Yes, I tried on Firefox and Chrome on XP Pro and Win7, nothing worked.  Then after reading your message, I thought ' what happens if I try that? "  ... and indeed, the videos are displayed inside, I.e. I got suddenly a bad feeling, like I was back at the beginning of the 21st century!

  Come on!  Who would still do 'optimized' only website to know today?   I'm sure they will not be displayed on my Tablet either.

  I found these videos on YouTube:

  http://www.YouTube.com/watch?v=Xss_2Qx51fU

  http://www.YouTube.com/watch?v=adrO7SXyjBE

  http://www.YouTube.com/watch?v=8lkMIqgfOj0

  http://www.YouTube.com/watch?v=ZHUjDWpHJvU

  http://www.YouTube.com/watch?v=_MofPJsG9gQ

  I think they are the same videos (but the quality is really bad... 360 p.: geez!).  Could someone confirm that they are indeed the same as those in vmware.com?  THX

  PS: Oh, on the section "Help", I found it at help | United States but I've seen no paragraph telling me how to report a problem on the website.

• Certified Training Center for vmware courses

  Hello

  I plan to take a course for vmware vsphere 5.5 certification subsequently, y at - it a site or URL to check if the training center's certified by vmware in order to qualify for the examination after having taken the course, its examination VCP VMware Certified Professional 5 - Data Center Virtualization (DCV-VCP5)

  best regards and thank you

  David P.

  Hi David,

  I am responsible for the education of Latin America, we have a couple of VATC offering classes to the Guatemala, I don't know why they don't include the research of place, send me an email at [email protected] and I'll help you

• Migration of plain SLES of SLES for VMware

  I was wondering if anyone has completed the migration without having to reinstall manually or took the time to complete a script.

  Novell has put together a script to migrate in reverse order...

  Support | Migration of a system of SLES 11-SP1-for-VMware to SLES-11-SP1

  Would be nice if VMware does the same thing...

  We scripted, so if someone is looking because he me message.

• Time-out error waiting for VMware Tools start in the prompt

  Hello people,

  I used PowerCLI 5.5 Release 1 connection to my 5.1.036098 vcenter (ESXi host 5.1.0 1065491 management).

  I'm connected (non secure warning) and be able to start the virtual machines.

  I try to run a task on the network of a VM VMware documentation example below interface.

  The first two commands work fine, but finally it fails with the error below.

  I upgraded VMware tools and hardware to the latest version.

  $vm1 = get-VM-name VM1

  $guest = get-VMGuest $vm1

  $interface = get-VMGuestNetworkInterface - VMGuest $guest - GuestUser password1 administrator - GuestPassword - ToolsWaitSecs 100

  Timeout error while you wait for VMware tools start in the comments.

  
  

  Someone at - it suggestions?

  Thank you

  romatlo

  The 3rd line to access the guest OS via VMware tools that must be installed in the virtual machine.

  There are a number of other prerequisites to be able to make that kind of call.

  See my work Will Invoke-VMScript? post.