Integration of the unit limit

Similar Questions

• Voiceport config for multiple servers of the unit

  Unity 4,0000 sr1 CCM 4.0.2 (sr1a)

  I'm a little unclear on the configuration of multiple servers of the unit for different sites to connect to the cluster of CCM even & I'm after a bit of advice.

  Is it just a case of setting up various ports of voicemail, profiles & lists of hunting for servers in separate unit & then arise relevant phones in the correct profile of VM (a bit of as a failover configuration)?

  Tips, advice or traps would be greatly received.

  Thank you

  NJ.

  So, sorry. I misunderstood.

  The CCM, you create a set of ports vm for each server in the unit. For this set of ports on ccm vm, you must create the list of hunting; include ports which will answer calls (exclude the ports used by the unit to dialout only (MWI, trap, AMS Notification)

  Create a second set of ports on the virtual machine with a different name. Repeat the above steps for the integration of the second unit.

  For all the integrations of the unit, you can use the same power MWI.

• The unit triggers managed security errors

  I work with a client who is in the phases of an end NT / Exch 5.5 to AD / Exch 2 K 3 migration. Over this last weekend, we migrated the unit and users associated with mailboxes of unity in the new environment.

  The customer has a monitoring service that provides managed security services They denounce that unity creates a large number of security events by calling the NT Service control services using the server

  Message Block (SMB) CHANNEL service on the home Exchange Server.

  I think it might be a normal part of the integration of the unit to Exchange 2K 3 server, I'm hoping to find someone who can tell me if it is a required function of the normal operation of the unit, a function to support an optional feature that can be disabled, or a sign that something is bad or misconfigured on the server unit.

  Additional details are added below, thanks in advance for any information that may be offered.

  Chris

  Detail ___Additional:

  NT Service Control access has been detected using the SMB PIPE (MSRPC_Svcctl_Remote_Query) service.

  On this signature or vulnerability:

  Requests to query remote services may be the result

  shares with malicious intent, or the use of the system management software.

  Level of default risk

  High

  Systems affected

  Windows NT: Any version

  Type

  Attempt of unauthorized access

  Description of vulnerability

  An attempt to access the NT Service control services by using the Server Message Block (SMB) service CHANNEL has been detected. SMB CHANNEL service allows managing Windows NT of Microsoft Services remotely. If a remote attacker access services NT Service Control, the attacker can start the service, stop the service, remove services, add services and change the default startup mode, allowing the attacker retrieve and modify the data stored on the server.

  What you see is 'Ping' of the unit of Exchange servers, it monitors. This 'ping' lives inside several process unit (AvCsMgr, AvNotifierMgr, AvUmrSyncSvr and AvMsgStoreMonitor on the top of my head) and occurs at a default value of 15 seconds. You will see a lot of these seqeunces throughout a day; their presence does not represent a misconfigured server of the unit. If the unit was to monitor three total Exchange servers, you would see about 69120 ping sequences per day...

  4 (unit processes)

  3 (Exchange servers)

  4 * 60 * 24 = (pings by pings day @4 / minute)

  In versions prior to 4.0 (5), the unit used the SCM, Service Control Manager, (what amounts to the SVCCTL interface) to determine the State of the Exchange Server. Since MS changed permissions to do this in W2K3 SP1, we have changed our mechanism to query the Mapper point final CPP of Interface of the store EMSMDB scholarship provider instead.

  When the unit is using the GCS, if you look in the SMB headers, the PID of the SVCCTL RPC calls fields will correspond to the process ID of the unit services that contain instances of AvWm: AvCsMgr, AvNotifierMgr, AvUmrSyncSvr, AvMsgStoreMonitor.

• The unit 3.1 (3) Manager directory goes to integrated security

  Hi all

  I'm under 3.1 (3) of the unit and when a Subscriber connects to their vm and hits 2 to send a message, the integrated safety message (sorry, this system is temporarily unable to complete your call. Please try again later.) plays. At least 1 times on 10 or so when you press 2 to send a message, the call will simply drop.

  If I configure entry on my subscriber numbers and assign a number to be sent to the handler directory I will immediately get the failsafe message when pressing the number until I know that the problem is related to the DH. There is no error in dbwalker (latest version). The DH has an owner (eadmin). The administrator of the example is NOT being listed in the directory (thought that it could have the fix, but was not). The location of the unit is in AD as it should.

  This server is 1 of 7 that are digitally networked and is the only one who has this problem. There are some other eadmin that are listed in the directory. I'm trying to remove them as well.

  Whenever I try to send a message, I see 6 the following event log entries:

  1)

  Event type: error

  Event source: AvPhraseServer_MC

  Event category: error

  Event ID: 10014

  Date: 21/06/2004

  Time: 14:20:16

  User: n/a

  Computer: PERUTY01

  Description:

  CAvPhraseServerMgr::CreatePhraseServerSUByProgID - get MultiUse 'AvAddrSearchENU.CMultiUse' to create SingleUse "AvAddrSearchENU.CSingleUse" of VariantList returned [0 x 80070057]

  2)

  Event type: error

  Event source: AvPhraseServer_MC

  Event category: error

  Event ID: 10022

  Date: 21/06/2004

  Time: 14:20:16

  User: n/a

  Computer: PERUTY01

  Description:

  CAvPhraseServerMgr::CreatePhraseServerSUByName - CreatePhraseServerSUByProgID(AvAddrSearchENU.CSingleUse |) AvAddrSearchENU.CMultiUse) returned [0x80004005]

  3)

  Event type: error

  Event source: AvPhraseServer_MC

  Event category: error

  Event ID: 10022

  Date: 21/06/2004

  Time: 14:20:16

  User: n/a

  Computer: PERUTY01

  Description:

  CAvPhraseServerMgr::CreatePhraseServerSU - CreatePhraseServerSUByName (AvAddrSearchENU) returned [0x80004005]

  4)

  Event type: error

  Event source: AvConvMsg_MC

  Event category: error

  Event ID: 10020

  Date: 21/06/2004

  Time: 14:20:16

  User: n/a

  Computer: PERUTY01

  Description:

  Thread [0x00000B7C] error of CAvCDEConvBase::InitPhraseServerSU() of CreatePhraseServerSU for the conversation [AddrSearchConv:AvAddrSearch:ENU].

  5)

  Event type: error

  Event source: AvConvMsg_MC

  Event category: error

  Event ID: 10004

  Date: 21/06/2004

  Time: 14:20:16

  User: n/a

  Computer: PERUTY01

  Description:

  Thread [0x00000B7C] error of AvCDEConvBase::Run() of InitPhraseServersSU() in the conversation [AddrSearchConv] on the device ID [1]

  6)

  Event type: error

  Event source: AvConvMsg_MC

  Event category: error

  Event ID: 10016

  Date: 21/06/2004

  Time: 14:20:16

  User: n/a

  Computer: PERUTY01

  Description:

  Transferred to FailSafe conversation during execution of conversation AddrSearchConv on Port 1. See the file below for the contents of the named properties: d:\CommServer\logs\NPDump_20040621_142016.txt

  I have attached the log of the port status monitor when I connected and you press 2 to send a message.

  Any direction is appreciated. =)

  Keith

  You seem to be missing the wave on your installation files. She complains is d:\CommServer\localize\Prompts\ENU\AvAddrSearch\AvAddrSearchENU003.wav.

  Please, copy all the files from the wave of localize\Prompts\ENU\AvAddrSearch corressponding on the CD1 directory in the d:\CommServer\localize\Prompts\ENU\AvAddrSearch directory. You will need to restart the unit for the change to take effect.

  Watch also for the start-up of the unit to see if there are errors in the log of events again.

• Connection of the UNIT with CUCM integration

  Hello

  Can someone please advice me on the underside, I CUCM (PUB + 1 SUB) cluster and node stand-alone 1 CUC.

  need to know the best Cisco recommended configuration

  1.0 order of AXL servers (what should we put 0 - PUB or SUB)

  2.0 tftp and order serever CUCM under port, (PUB, order SUB) group settings

  Please advice

  Thank you

  Purna

  Axl Server always be PUB and SUB.
  Pub - 0
  Sub - 1

  TFTP server must first be Sub and PUB.

  Sub - 0
  Pub - 1

  This is the best way and the recommended method to configure / integration with CUCM with connecting the unit

  Sent by Cisco Support technique iPhone App

• Voicemail configuration base with CUCM and connections of the unit

  Hello again,

  I'm still very new to CUCM.  I am configuring a CUCMB 6.01 test deployment.  He has connections in the integrated unit.  I have 2 DNs assigned to users and Cisco IP phones.  I use MGCP (Cisco 3745 with 2FXO as gateway).  Now, I'm trying to extensions of voicemail installation for the users.  I read a lot of documentation on CUCM and unity, but I know that Unity Express is not what I need, and that you have not found information on the basics of implementing voicemail for users of CUCM.

  Users are DN 1001 and 1002 respectively.  They are part of a list of hunting (broadcast) so that the arrival of incoming calls, both phones will ring simultaneously.  Not sure if this has any bearing or not.  I would like to be able to put in place so that each DN rings on the IP phone say 6 times, then go to a Unity voicemail box configuration for that user.  I have already imported users 2 in the unit.  I ran the voice messaging port configuration wizard.  Everything looks as if it runs correctly, but I'm stuck really share say CUCM to route the call to the mailbox of the unit.  Probably the simplest part.  Ideas or help on this would be much appreciated.  Thank you in advance.

  Impetuous salvation,

  CUCM works this way

  So the fact that 1001 and 1002 receive calls via a group has a significant impact on this config.

  You must keep in mind that a call that is routed through the fighter pilot will always ignore the CFWD settings on phones of hunting member of the group. The normal way to control it then is through disconnection of the Group Hunt members phones combined with the front fighter pilot level settings.

  The following section describes how the parameters to call it forward on the phones of individual members Hunt are ignored when presented a call via the hunting feature. Here's a clip;

  Hunting and call forwarding

  The concept of hunting differs from call forwarding. Hunting allows Cisco Unified Communications Manager to extend a call to one or more lists of numbers, where each such list can specify an order of hunting which is selected from a fixed set of algorithms. When a call extends over a part of hunting of these lists and the party does not answer or is busy, hunting resumes from the next part of hunting. (The next party of hunting varies according to the current hunting algorithm). Hunting has so ignore settings call forward No Answer (CFNA), call forward busy (CFB) or call before all (CFA) for the party to attempt (group member line phones).

  Cisco Unified Communications Manager offers the possibility to redirect a call when hunting fails (that is, when the hunt ends without a part of hunting to the respondent, due either to exhaust the list of numbers of hunting is to expire). If used, this final redirection includes an automatic call forwarding action. Therefore, the fighter pilot Configuration window includes call forwarding configuration concepts which are similar to those found on the directory number Configuration window.

  Example of a call hunt

  Although hunting is different from the transfer, Hunt often develops as a call that gets forwarded to a certain number of fighter-pilot. The protective cover of appeal extends from hunting to allow the final drive after two exhausts of hunting or expires.

  A typical call calling hunting can include the following phases:

  The appeal of hunting through groupings of posts set up according to the algorithms implemented for each group. Hunting is successful (if it meets a hunting party), exhausts (if all parts of hunting are tempted, but no response), or expires (if the deadline set by the Maximum hunting timer runs out before that all parties are tempted, and none of the parties who have tried to answer).

  For the purpose of this example, we assume that hunting does not succeed.

  If a form any of the final drive is configured, the call forward for a next destination; otherwise, the call is released.

  Maximum hunting timer

  The Maximum Hunt Timer field on fighter pilot Configuration window allows the administrator to enter a value (in seconds) to limit the hunting through a list of hunting season. After gaps in the time specified, if hunting was not successful, the call is transferred to a voicemail system, a specific compound number, or some personal treatment (if configured) or the call is released.

  The good doc.

  http://www.Cisco.com/en/us/docs/voice_ip_comm/CUCM/Admin/6_0_1/ccmsys/a03rp.html#wp1078922

  If the call goes unanswered or all Member phones are disconnected, then an attacker needs to be applied at the level of the "fighter pilot".

  Hunt the settings forward

  Before hunting without an answer - when did not answered the call which is distributed through the list of hunting at a specific time, this field specifies how to transfer the call.

  Destination this parameter contains the number of the directory to which calls are forwarded.

  Before busy hunt - when the call which is distributed through the list of hunting is busy at a precise moment, this field specifies how to transfer the call.

  Destination this parameter contains the number of the directory to which calls are forwarded.

  Maximum Timer Hunt - enter a value (in seconds) that specifies the maximum duration for hunting. (Used in conjunction with Forward busy hunting)

  In your case, it is best to configure the DN of a fighter pilot in the extension of alternatives under the 1001 and 1002

  mailbox.

  I hope this helps!

  Rob

• Card TV Tuner that works in the United Kingdom and Switzerland

  Looking to buy a laptop computer running windows MCE. However, I need the TV Tuner card to be able to receive analog Switzerland and UK analogue or Digital TV signals. Integrated standard digital/analog hybrid TV tuner DVD-T sounds like it fits the Bill, but need to check if it works OK in Switzerland because they use the PAL B/G instead of PAL format I format used in the United Kingdom. Can anyone help?

  Hello Andy

  The fact is that the TV tuner is associated countries and if you buy laptop with integrated (for example Qosmio) TV tuner, you'll probably be able to use it only in the country where the laptop is purchased. Perhaps the external TV tuners from different manufacturers are more flexible and can be used in different countries.

  In my opinion you should speak with your local dealer. They have the best presentation of the product and you can get more accurate information. I also know that you can install WMCE on each item you purchase. I recommend for example P100. Large unit with fantastic 17.0 "TruBrite (1440 x 900) discovers Wide 16:10 color TFT display. I'm not 100% sure but I think that the Satellite P100-367 comes with WMCE.

• Loosening Skype integration, remove the Skype logo on outlook, Hotmail

  Hi all

  Y at - there someone who can tell me how I can remove the integration of Skype on outlook, hotmail and also removes the Skype logo.

  I do not have the addons of Skype or Skype webplugins, I use the browser chrome on version 8.1 x 64-bit windows

  Can someone help me with this

  Geert

  Nobody wants, but they don't remedy. I guess * beep * give them a lot of money and that is more important to the United States, because it is obvious that if someone wants to Skype starts the program and not the mail. Everyone says it's boring and they don't give us a solution...

• Qosmio G20-139 of the United Kingdom - TV tuner does not work in Libya

  Hello

  My name is m, k, sh I live in Libya.
  I bought Qosmio G20-139 until now it works normal but I would not use this pc to look at the possibility of using satellite channels. I get only the small screen in the screen of my pc.

  In the operating manual of the said (tv tuner may not only work in the country of purchase. means to the United Kingdom only)
  My equation, what can do to solve the broblem.

  Can I install any software for example or another TV tuner?
  The tv tuner in this pc, what they said is integrated.

  Thank you very much

  Hello

  I think that the UK tuner will not work in Libya due to different video standards. I m talking about different settings PAL and NTSC.

  In your case, it would be desirable to use an external USB DVB - T tuner (if DVB - T is available in Libya) that supports PAL/NTSC in Libya settings.

  I think you have to look at some stores for local laptop/computer and should ask a few merchants for details.

  Welcome them

• Como leer variables desde sup a VI has main VI of the United Nations

  MI pregunta es the following:

  Yo created a program that is able to leer codes of barras por medio una camara Web, además of characters the camara misma desde leer. Este VI esta integrated a main United Nations VI y lo deseo are realize leer los datos obtenidos mi Subvi para poder manipularlos in main el VI, los datos del Subvi son datos tipo salida string if alguien me pudiera orientar para resolver este problema.

  Understand English, don't worry.

  Follow an example.

  I don't know what you do to the camera, so with some time, I created a Subvi loop that updates a string for each interaction. An entry of the Subvi is the indicator of the MainVI chain. The loop takes about 10 sec.

  Note that even if the loop in the main tracks of VI every second, the string value is updated a lot of time between each loop interaction. If you want to be less updates, you must add a time delay within the Subvi.

  (In fact, even if you stop the main VI before 10 seconds the indicator will continue updated!)

• Trojan.ADH.2 cleaned out XP Pro SP3; Suspect that some damaged XP files. Y at - it a utility to check the integrity of the file XP?

  Disconnected PC of the web in order to prevent the spread to other units. Under logon admin school, used current analysis complete AVG, Norton, & System Mechanic Pro & own utilities. Now able to use the main admin connection, however PC remains disconnected from the web.  Nothing I can put my finger, but the PC does not not like before.  Suspect damaged due to XP files by Auger or cleaning utilities.  Y at - there a utility that can check the integrity of the XP removal or is a scrub & charging necessary?

  Hi NoelJohnston,

  ·          What are the issues on the computer after removing the Trojan computer virus?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• The UNIT-D/120JCTLS =, same PN but different cards?

  I'm an analog integration in a PBX using a STM - 7835 H - 3.0 - ECS1. I put in one D/41F and double D/120JCT cards.

  D/41F and D/120 comes with the correct universal PCI interface. The second D/120 comes with a standard PCI interface. Am I an old map or is there a PN blunder? Two D/120JCT cards have the UNIT-D/120JCTLS = PN on the cisco box. Attached photos. Thank you.

  I still believe, Cisco sells and ships the old version non - Universal PCI of the Council D/120 because the version of the puic is not compatible with unity 3.x. For unity 4.x, you must use the version of the puic and part number because it is the UNIT-120U-D/LS =.

  Kind regards

  Eric

• The unit always offline after message store to dismount/mount

  Hello:

  A customer recently had a problem where a disc filled and caused the message stores to disassemble. The unit entered into failsafe and queue of messages in the folder UnityMTA. Once the stores have been mounted again, never reconnected unit or resync would, until it has been restarted.

  I can easily reproduce the problem by disassembly of the store and reassembling it. The unit never recovers. Sounds strange and it seems that it should return back once the store comes back online. ??

  Unity 4.0 (3)

  Exchange 2003

  We get 4 events in the application log, as follows:

  ************************

  Event type: WARNING

  Event source: CiscoUnity_Notifier

  Event category: run

  Event ID: 1008

  Date: 15/02/2005

  Time: 22:58:29

  User: n/a

  Computer: UNIT-1

  Description:

  Received message 9 on NotifyQ for the user event

  CN = jsabutis, cn = containers, or = HU_ADM, o = NMHU, which is not monitored. No Indication or

  notifications will occur for this user. To correct, perform a resynchronization of all

  MailUsers with UTIM: go to the properties of your integration tab and press on the

  Resync button.

  ************************

  Event type: error

  Event source: CiscoUnity_MALEx

  Event category: error

  Event ID: 30003

  Date: 15/02/2005

  Time: 23:03:04

  User: n/a

  Computer: UNIT-1

  Description:

  An attempt to access the Bank of mailboxes Exchange primary by AvUMRSyncSvr via

  MAPI failed. The MAPI subsystem returns the following error: the attempt of

  Open a session on the Microsoft Exchange Server computer is not...

  ************************

  Event type: error

  Event source: CiscoUnity_MALEx

  Event category: error

  Event ID: 30012

  Date: 15/02/2005

  Time: 23:03:04

  User: n/a

  Computer: UNIT-1

  Description:

  One has occurred which prevents the Exchange managed by AvUMRSyncSvr via MAPI access.

  It is generally an indication of problems with the unit configuration, Exchange,

  or the MAPI subsystem.

  Check that the unit service accounts are granted the correct permissions and

  There are no problems with the installation. The SysCheck utility can help

  diagnose the problem.

  ************************

  Event type: error

  Event source: CiscoUnity_Doh

  Event category: error

  Event ID: 32013

  Date: 15/02/2005

  Time: 23:03:04

  User: n/a

  Computer: UNIT-1

  Description:

  DOH connection failed due to the error of logon component of e-mail: 8004052eH

  ************************

  I hope someone can explain this behavior.

  Thank you

  Vance

  Is it fair that the messages are left to the UMR and subscribers are still able to connect? Or the connections of the subscriber fail too after Exchange is back online? If only the UMR, a restart of the UMR service restore service?

  Looks like you see CSCed51091. It is corrected in SR1 3,0000 and 4.0 (4).

  Thank you

  Keith

• Limits of size of the unit mailbox and filtering

  Is there a size max / recommended for a unified messaging environment? I heard that for a 100 MB size limit?

  The unit still filter through the Inbox for a new message or just when you have saved messages of all types such as e-mail, fax, vm?

  I don't know if a person removes a large number of emails, then the unit passes to the entire Inbox to see what is there are far as new, deleted, etc...

  Couple here things.

  First of all, in recent versions of 4.x, we rely on indexing services in Exchange to keep filters updated for the number of messages and generate the mailstack for voice, received faxes, emails that are presented to the appellant when connects. Unity doesn't build this index on the fly when you connect more unless for some reason, it isn't updated when we (meaning that it's a newly imported mailbox or the indexing service has not got to it yet or similar).

  When a Subscriber is imported in unity we insert requests to inbox of the mailbox on the Exchange service to maintain an index of messages based on the State of reading/type as that when we will connect we can get quickly a number of messages present and build a stack of messages to fairly short term. It is much, much faster to do it on the fly and helped the sites with very large inboxes to get acceptable performance. The indices, as soon as its created, are updated by Exchange whenever the Inbox changes (new message added, reading marked, deleted...). There may be a window of time from when a Subscriber is added and their index is up, however.

  So, assuming that you are on 4.1 or later and with the help of Exchange, I don't think there is any limit mailbox specific where the performance of UNIFIED messaging will start to decompose.

• The unit and CallManager can coreside?

  Hi Pros,

  For lab purposes, can the unit and CallManager be placed on the same server?

  Thank you

  Mike

  HI -.

  There may be other reasons to not install CallManager and unity on the same server, but here is one that I thought - CallManager uses a subset of the Windows operating system. Some services are disabled by the OS image, which is NOT compatible with that required by the unit. Even though this is a laboratory environment, if possible, I would dedicate two servers. For a long time, we used a server DL320 as our CCM test. I have a DL380G1 for a unit test that has mirrored drives - pretty well because I don't want to rebuild the unit just to do a patch test or upgrade of test and everything goes south - just return the mirrored disks and start on the original. I thought the two onbox would cause problems with the integration of the TAPI ports, but I couldn't find anything to justify this thought.

  Ginger