Integration with the PIX IDS firewall

I read the Release Notes for Cisco Intrusion Detection System Sensor Version 3.0 S4 (1), and tripped on the new features of this version it pretends the integration with the PIX firewall

How do implement you this? What kind of integration offer?

Instructions for the sensor and the basic configuration of PIX can be found here:

http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid23

Instructions for sensor and PIX SSH configuration can be found here:

http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids8/13870_01.htm#xtocid16

You can configure the sensor to connect to the PIX via telnet when

using the PIX inside interface, otherwise you have to use SSH.

SSH with 3des encryption is supported in version 3.0 or later

sensors for connections of PIX.

Warning: If you use telnet with a version 6.2.1 or PIX more late or if

you want to use SSH with encryption on any PIX, so you

need a patch for your sensor. If so, open a case of TAC and demand

the latest version of nr.managed engineering. Reference

[email protected] / * / for any question.

Tags: Cisco Security

Similar Questions

  • Serving AVDF 12.1.2 integrated with the package DBMS_AUDIT_MGMT allowing the automation of audit records

    I have a question about this part of the vault of the audit and the Guide Release 12.1.2 database firewall administrator documentation:

    -Start quote-

    Schedule for a job of automatic Purge

    Oracle AVDF is integrated with the DBMS_AUDIT_MGMT package on an Oracle database. This integration automates the purge of the AUD $ audit records and files of $ FGA_LOG and operating system .aud and .xml files after that that they have been properly applied in the repository of Audit Vault Server.

    Once the complete purge, officer of Vault automatically sets a timestamp on the audit data that has been collected. Therefore, you must set the property USE_LAST_ARCH_TIMESTAMP set to true to ensure that the right set of audit records are purged. You don't need to manually set a work of purge interval.

    -Extract-

    According to the documentation above, how AVDF brings integration resulting in automation?

    Hello

    When you configure an audit trail in the AV server, say a table AUD$ path, once it collects the audit data he attributes automatically the last time stamp archive on the secure target database (you can check it out of view DBA_AUDIT_MGMT_LAST_ARCH_TS).

    However, the trail (or the AV itself server) does not purge that verification data already collected.

    You have to clean these data with the DBMS_AUDIT_MGMT. Procedure CLEAN_AUDIT_TRAIL, example for AUD$ table only:

    BEGIN

    DBMS_AUDIT_MGMT. () CLEAN_AUDIT_TRAIL

    audit_trail_type-online DBMS_AUDIT_MGMT. AUDIT_TRAIL_AUD_STD,

    use_last_arch_timestamp => TRUE);

    END;

    /

    You can simply run this procedure via a job depending on how often you want to cleanup audit and what time recordings. You don't need to worry about the timestamp of last archive.

  • Windows Media Player cannot play the file because of a problem with the network or firewall settings.

    Windows media player cannot play the file because a prblem with the network or firewall settings, you can help me solve this problem?

    original title: windows media player

    Hello

    1. you remember to make changes to the computer before this problem?

    2. do you get this error when you try to play a specific file or all files?

    Follow these methods.

    Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Method 2: I suggest that you disable Antivirus software and firewall temporarily and check.
    Disable the antivirus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software Tour

    Enable or disable Windows Firewall
    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
    Note: Firewall and antivirus to protect your computer against viruses and other security threats.  In most cases, you should not disable it.  If you have to disable it temporarily, you should reactivate as soon as you are finished.  If you are connected to the Internet or a network while the firewall and anti-virus are disabled, your computer is vulnerable to attacks.


    Method 3:
    try to change the proxy settings.

    a. open Windows Media Player, press the Alt key to bring up the file menu.

    b. click on the Tools menu and select Options. Click the network tab.

    c. Select a Protocol (HTTP and RSTP), click Configure , and then select Autodetect proxy settings or use proxy settings of the Web browser (available for HTTP protocol only). Do this for each protocol.

  • better integration with the Mavericks. Still a problem with the display of the menu bar spaces when moved

    Much better integration with the OSX mavericks on the latest version. Without a doubt ahead of Parallels in terms of dual display/full screen. The menu bar has been resolved, but there is a ghost menu bar that appears when you move one space (fullscreen vm) from one monitor to the other. It resembles a translucent bar on top and without words. But clicking on it shows menus as if it is supposed to be links there.

    Yes, it is a known problem with the Mavericks Developer Preview; We work closely with Apple to find a solution. So far, we have seen only with the restoration of the window or when you move the window between monitors - if you leave full screen and enter again, it should work fine. If you notice any others, please let us know.

  • Error code 0 x 80070424 with the Defender, Windows Firewall in Windows 7, does not not for me solutions

    I got the error code for my firewall, I read all of the solutions posted to what I could find, but there is still something wrong. First, I did the analysis of malware and viruses. He found the rootkit malware and removed, but no viruses were found. I tried to manually start the firewall but it does not exist in the services menu. The problem is that none of the Microsoft downloads for automatically fix or other downloads posted to help download for me. As soon as I click on "run" he said that it contained a virus and was eliminated. I did a scan for virus twice.  Any suggestions?

    The description you have provided sounds like your computer is infected with the 'new' Sirefef variant which poses problems for MSE and Windows Defender.

  • Oracle fusion tax and its integration with the application third-party to the functional aspect only.

    Hello

    I'm looking for some details / documents in which Oracle merger tax and its integration with third party requested to the functional aspect only. Could someone please help to fix the required details.

    Thank you... Sandeep

    Hi Sandeep,

    have you looked at these docs for Fusion Apps Financials / ERP Cloud?

    -Implementation of the tax- http://docs.oracle.com/cloud/latest/financialscs_gs/FAITX/toc.htm

    -To tax assistance - http://docs.oracle.com/cloud/latest/financialscs_gs/FAUTX/toc.htm

    "Implementation tax" contains a chapter on 3 third-party integrations. Is that what you are looking for?  If not, can you clarify what you mean by 'integration with 3rd party applications'?

    Thank you

    Oliver

    Fusion applications Developer Relations

    https://blogs.Oracle.com/fadevrel

  • Problem in starting service of integration with the CAD / 11g

    Hi friends,

    IM @ the stage of registration of service integration and the repository in DAC 11 g function. I can start the service of good repository in CAD, but facing the question in the start of integration service with DAC, while trying to test the connection im getting a message like

    Failure connecting to BIA_IS!

    I'm not sure the reason for this problem in the DAC. I have also set the necessary environment variables such as INFA_HOME and INFA_DOMAINS_FILE on the domains.infa as file

    INFA_DOMAINS_FILE = C:\Informatica\9.1.0\domains.infa

    Also checked with the file dac_env which has the content below

    REM -----------------------------------------------------
    REM
    REM OF ENVIRONMENT VARIABLES THAT YOU MAY HAVE SET FOR
    REM INFORMATICA GOOD 8.x or 9.x HANDSHAKE.
    REM
    REM INFORMATICA_SERVER_LOCATION refers to the installation of
    REM Informatica components. Example:
    REM C:\Informatica\PowerCenter9.1
    REM
    AREAS OF rem. INFA_FILE_LOCATION designates the location
    REM (including the name) of the file domains.infa
    REM
    REM please make sure to set the correct values for the variables
    REM mentioned above
    REM
    REM -----------------------------------------------------

    Set INFORMATICA_SERVER_LOCATION="C:\Informatica\9.1.0".
    Set DOMAINS_INFA_FILE_LOCATION=C:\Informatica\9.1.0\domains.infa

    Set INFA_CMD_STYLE = 8
    set PATH=C:\Informatica\9.1.0\server\bin;%PATH%
    Set INFA_DOMAINS_FILE = % DOMAINS_INFA_FILE_LOCATION %

    What could be the problem and where to check with the file journal related to the failure of integration in CAD service.

    Thanks in advance.

    Kind regards

    Saro

    Hi guys,.

    The problem is solved. Here it is two precautions to be taken into account.

    *) Make sure you INFA_HOME/Server/bin is @ the end in the PATH variable.

    *) Of each change in the PATH variable, it is best to restart the services (infa and DAC) here and for the changes to take effect.

    Kind regards

    Saro

  • iRecruitment integration with the external Web site

    Gurus,

    Can someone help me in understanding the works of irecruitment view job openings?

    To be more precise, I'm looking for something like this.

    What should I do if I need to post some jobs to the external Web site? How this can be integrated with an external search site?

    Let's say that if I implement irecruitment what exactly should be my step so that if someone goes on a website of a particular business, click careers etc, then this page should move to an external site?

    My client said that they would like to post jobs on Monster.com etc.

    I would be grateful if someone explain to me how exactly how to proceed with?

    concerning

    Hi 922530,

    Register for external Web sites like iRecruitment recruitment Sites. It is a standard feature. Detailed procedure is available in iRecruitment User Guide.

    For 11i click the link: http://docs.oracle.com/cd/B25284_01/current/html/docset.html

    For R12...         Link: http://docs.oracle.com/cd/B34956_01/current/html/docset.html

    I hope this helps.

    Kind regards

    Siva

  • Save to File.vi report does not work when integrated with the executable

    Hello

    When I use the NI_Report.lvclass:New Report.vi and NI_Report.lvclassave report to the File.vi, I can use successfully to create and excel spreadsheet so he was working at the developer.

    However when I build the source into an executable, this no longer works.  (The name of the file is built from the source, so I'm not using a dialog box)

    It can, however, create a .html file, but it does not seem as tidy.  Why is he not creating the Excel file?

    Running developer suite 2009, tried the .exe on Windows 7 and Windows XP with the same effect.

    Thank you

    -

    James

    See the attached zip file, it works for me here, see jpeg images and build the application accordingly and let us know. Did not include exe file, because the file size is too big.

  • NAC integrated with the comment server

    Hi all

    I met a problem that happened when I joined NAC with the comment server.

    Hope I can find the solution here!

    When I create an account to the comment server, the account will be created in the NAC as a local user.

    If I chose "time profile - start-end", the account will be created in the NAC.

    But if I chose "Time profile - first Login", the account will not be created in the NAC.

    If the guest cannot connect with this account using "time profile - first Login.

    All configurations of the document including "Radius Client and Accounting" has been correctly configured.

    But I can't yet find the solution.

    Please answer me if you know the answer. Thank you very much!!!

    Jet Li

    If Taiwan

    Hi Jet Li,

    This should be because only based on time with beginning and end is supported when you turn on the END with the NAC Appliance solution:
    http://www.Cisco.com/en/us/docs/security/NAC/guestserver/configuration_guide/20/g_guestpol.html#wp1063409

    "Cisco NAC comments Server Version 2.0 supports only start/end and creating profiles when used with Cisco NAC appliances"

    Kind regards

    Fede

    --
    If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

  • Replication of ACS and integration with the Active directory database

    Hi all

    I have to configure two ACS SE with the internal database replication. I have also a server active directory that must integrate with ACS. My doubt is that I need to configure the IP address of the ACS during installation of the remote agent on active directory or only the primary ACS

    No need to give the IP of two ACS. Give the primary IP of ACS.

    Kind regards

    ~ JG

    Note the useful messages

  • CAN I UPGRADE MY MOBILE PROCESSOR? OR IT IS INTEGRATED WITH THE SYSTEM BOARD?

    I USE A LAPTOP HP PAVILION 1318AX G6, AND I WANT TO UPGRADE THE AMD A4 CPU TO AMD A8. THE MB IS TAKEN FS1.

    PLEASE ME TELL THE PART NUMBER OF SUPPORTED PROCESSORS.

    THANK YOU IN ADVANCE.

    Here is a link to the Manual:

    Your manual

    Check your motherboard part number by opening the memory slot and look inside. An A8 AMD is one of the proposed processors, but not sure it will work on all mothers delivered various AMD with the series G6-1000.

  • How to deploy the file. War in Tomcat integrated with the Complutense University of MADRID

    Hello

    Can anyone please share the steps to Configure Tomcat integrated into the University Complutense of MADRID and the steps to deploy the individual file of JSP and war.

    Thank you

    Published by: user4884609 on February 13, 2012 16:23

    I think that this page 67. This manual provides information looking after: http://docs.oracle.com/cd/E10316_01/cs/cs_doc_10/documentation/developer/sdk_getting_started_10en.pdf

    Kind regards
    Boris

  • UCSM integration with the series C - non-nexus 2 k for the management?

    Is it possible to integrate the grid of series C rises (particularly C250 M2) with UCSM without using the 2248 management in accordance with this article for the C200 http://www.cisco.com/en/US/docs/unified_computing/ucs/c/hw/C200M1/install/ucsm-integration.html

    I guess we would be able to plug ports LOM on the C250 on a different switch IE of 3750 which would be connected by uplink to the FI 61xx. The ANC on the C250 map would be connected directly to the FI 61xx. Would this work?

    The integration guide refers only to the Nexus 2248 FEX which we do not have and I can find no confirmation elsewhere.

    Thanks in advance

    Tim

    Of course, the Nexus 2 k is similar to the IOM module (2104) in 5108 chassis.

    To keep the same logic of control plan the Nexus 2 k provides similar functionality.

    All under the Nexus 2 k will have a chassis 'rack mount '. The nexus 2 k is not a switch by saying but a 'slave' off the parent device "switch / stop host mode" (6100). A normal switch / normal typical would not work in this case.

  • Integration with the iPad 2

    I use elements editor on a Mac and I use iPhoto to organize my photos. When I edit a photo can I put back into iPhoto successfully but no photo that I modified appears on my iPad. All other photos on the selected album or event will get on the ramp, but any photo that I changed the editor-in-Chief is missing. Can someone help me solve this problem? Thank you.

    That's why. Here's how to use iphoto with PSE:

    http://barbarabrundage.com/2010/11/29/using-Photoshop-elements-9-with-iPhoto/

    This is for PES 9, but it is only identical for PES 10, except that if you choose to do the external editor, see this:

    http://barbarabrundage.com/2011/10/05/Adobe-hide-and-seek-setting-PSE-10-as-external-Edito r.

Maybe you are looking for