Intel 2200BG always disconnect when the value g on a Satellite M70

Hello

After months of go around forums and messages, I still have the same problems with my card Intel 2200BG wireless.
Of course, I've updated my bios, drivers,... but the problem remains.

I called toshiba france and they were just as good to send me a link to the latest drivers...
I have no problem with mode b and use channel 11.
I think I'll just throw this card and buy another brand.

Any suggestion?
Thanks for the help
JPaul of<>

Hello

Don't always blame your WLan card in Notepad.
Wireless performance depends on the wireless card, but also on the WLan router!

You define the G standard only on the router or wireless network card?
In the WLan card properties, you should be able to put the B, G or two B/G.
Also turn off the power save option on this map.

Maybe you checked only the Toshiba driver for the latest Intel WLan driver page. Download the latest driver on the Intel site!
You use the Intel ProSet utility?

Tags: Toshiba

Similar Questions

  • Data affinity: Duplication of entities when the value of associatedKey?

    I'm trying to implement data affinity. I have a domain of the FootballClub and player model. A player is held by a FootballClub. Players and Clubs are cached in separate NamedCaches and I use serialization of java base.

    Affinity seems to work - I connect the partition using a BackingMapListener and you can see that a player is going to the same partition as the club owner. If I start a new data node, and the score moves to the new node, that the player and the Club move together.

    The problem I have is that if I change the owner of an existing player and put in my reader updated in the cache of the drive, I don't update the existing player entry in the cache - I get a brand new player. This is the expected behavior?

    If it is not planned, anyone have any suggestions as to where I could go wrong? I tried with a KeyAssociator and by setting up KeyAssociation on Player.Id.
    I also tried excluding the clubName (associatedKey), in the methods Player.Id.hashcode () and equals() and make the transitional clubName in this class.

    I connect MapEvents and you can see that the toString() of the binary version changes key player when the value of KeyAssociator.getAssociatedKey () changes slightly, but convert the key to original format using BackingMapManagerContext.getKeyFromInternalConverter () always returns the same value.

    I'm new on consistency so quite possible something basic wrong I.

    user6871200 wrote:
    I'm trying to implement data affinity. I have a domain of the FootballClub and player model. A player is held by a FootballClub. Players and Clubs are cached in separate NamedCaches and I use serialization of java base.

    Affinity seems to work - I connect the partition using a BackingMapListener and you can see that a player is going to the same partition as the club owner. If I start a new data node, and the score moves to the new node, that the player and the Club move together.

    The problem I have is that if I change the owner of an existing player and put in my reader updated in the cache of the drive, I don't update the existing player entry in the cache - I get a brand new player. This is the expected behavior?

    This is the expected behavior: If you have actually changed the key, it's a different key, and you put the same player with a different key in the cache. Why it would affect old Scripture?

    A key in the plan is considered as immutable and you violate this principle.

    The problem is that your modeling is defective: owner should not be part of the key, or must be immutable. In your case, it should not be part of the key (but then you can't affinity). Question is: why do you want to have an affinity between the owner and player, anyway?

    Best regards

    Robert

  • How to hide the div tags when the value inside is empty?

    I'm creating a tab bar using jQueryTabs.

    I want to hide a tab when the value inside is empty.

    It is perfectly feasible to hide the real on the ground when notting to show is, however, the tab is always in the tabs on top.

    Here is the code:

    as you can see in the tabs 4 and 5 I'm hidding values that are inside the field is it not there no. The tab is still there

     <script type="text/javascript">
    // BeginOAWidget_Instance_2140022: #jQueryTabs
    
    
    
    
              $(function() {
          $("#jQueryTabs").tabs({
                        event:"click",
                        collapsible: false,
                        selected:'0',
                        fx: { opacity: 'none', duration: 1 }
            }).tabs( "none" , 1 , false ); 
              });
    
    
    // EndOAWidget_Instance_2140022
           </script>
          <div id="jQueryTabs">
            <ul>
              <li><a href="#tabs-1">Description</a></li>
              <li><a href="#tabs-2">Specification</a></li>
              <li><a href="#tabs-3">Video</a></li>
              <li><a href="#tabs-4">Audio</a></li>
              <li><a href="#tabs-5">Downloads</a></li>
            </ul>
            <div id="tabs-1">
              <p><?php echo $row_Recordset1['Full_Description']; ?>
            </div>
            <div id="tabs-2">
              <p><?php echo $row_Recordset1['Specification']; ?></p>
            </div>
            <div id="tabs-3">
              <p><?php echo $row_Recordset1['Video']; ?></p>
            </div>
            <div id="tabs-4">
              <p><?php if (!is_null($row_Recordset1['Audio1'])) { ?><a href="<?php echo $file_wav.$row_Recordset1['Audio1']; ?>"><img src="files/Images/audio_image1.jpg" width="50" height="50" ></a><?php } ?></p>
            </div>
            <div id="tabs-5">
              <p><?php if (!is_null($row_Recordset1['Brochure'])) { ?>
              <a href="<?php echo $file_pdf.$row_Recordset1['Brochure']; ?>"><img src="files/Images/pdf_image1.jpg"></a>Brochure<?php } ?></p>
              <p><?php if (!is_null($row_Recordset1['User_Guide'])) { ?><a href="<?php echo $file_pdf.$row_Recordset1['User_Guide']; ?>"><img src="files/Images/pdf_image1.jpg"></a>User Guide<?php } ?></p>
            </div>
    
    

    RiaandSteve1 wrote:

    Thanks for your quick response,

    I tried this,

     

    ">

    I'm not able to click on the tab now, but he is always visible (in this case telling audio). I must be something to do with this code

  • Audio
  • above the actual div for the tab.  Do not know how to remove the tab

    Well Yes if you want to hide the tab too then you must surround the

  • tag in a similar way:

  • Audio
  • Airport extreme disconnects when the ivp6

    Airport extreme disconnects when the ivp6 but works perfectly with disconnected ivp6. I use Cox Cable as my internet provider.

    Apple says that Cox has not fully being implemented IPv6 yet.

    Cox said on their website that the Apple routers are not compatible with their IPv6 service.

    It is difficult to know who is right, but IPv6 works very well with Comcast and Time Warner... and routers Apple worked very well with Cox, until Cox began to make changes to their systems.

  • How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

    Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

    I assume that you use a while loop to keep the updated value.

    Add a record to offset to your looping it initialize with a U32 (time in ms)

    Add the registry to offset to your loop that keeps the previous value of your bool

    When your reaches the threshold value => the light and set the current time in your shift register.

    In the next iteration of the loop weather check value is still above threshold

    => Y-online previous set to true?

    => Y-online the next iteration

    -Online N => turn switch on and set the current time in your shift register.

    -Online N => subtract the time current less time shift record-online more then 5 seconds?

    => Is => keep turning on

    -Online N => turn given

  • MSN disconnects when the cat and I have to sign, how can I solve this problem?

    Origianl title: MSNMSGR

    MSN disconnects when the cat and I have to sign, how can I solve this problem?

    Hi Sorauren,

    Remember to make changes before this problem?


    Disable the security software and verify afterwards; Follow the steps mentioned in the link below

    Disable the antivirus software

    If you use a non-Microsoft security software, you can check the documentation provided with the program to achieve this.

    Configure your security software to allow MSN to communicate on the internet.

    Important: Re activate security software once everything is done.

    You can post your query on the Windows Live Forum.

    http://windowslivehelp.com/product.aspx?ProductID=2

    In addition, see the link below

    How to contact MSN customer service
    http://support.Microsoft.com/kb/940784

  • Is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1).

    Using the effect of text "cursor", I am able to view replace "30 ° C" "35.5 ° C". My question is: is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1). I use this code:

    Temp = effect ("Slider Control") ("Slider");

    sliderValue = Math.round(temp*10)/10;

    [sliderValue + ' ° C ' "']

    Here is the solution:

    numDecimals = 1;

    Temp = effect ("Slider Control") ("Slider");

    sliderValue = (Math.round(temp*10)/10).toFixed(numDecimals);

    sliderValue + "° C";

  • How to disable Lov when the value of the attribute is NULL at the level line

    Hi all

    JDev 11.1.1.5.0

    I have a view as a table ADF jsff page object. Value of the attribute in a row may have null values.
    And I want that Lov must be disabled when the value of the attribute in the row is null or not.
    So please suggest me how can I implement this.

    Kind regards
    Marie-Claude

    Set to the disabled for LOV attribute property

    disabled="#{bindings.YourAttribute.inputValue eq null}
    {code}                                                                                                                                                                                                                                        
    
  • Cell borders disappear when the value is null

    I'm now a PL/SQL report. When the value of a column is null, the cell borders disappear. I would have preferred that they do not disappear.

    Any suggestions?
  • In the column of table when the values are grater that maximum linear axis it does not show the bar

    Hi guys,.

    In the column of table when the values are grater than there maximum linear axis it does not show the Bar.But I want to display the bar up to the maximum limit of the axis is linear without changing the limit max.

    Consider following the example:

    The values are 80 90 200 300

    and here is the result:

    Left: when I don't put maximum property of linear axis.

    Right: when I put in maximum property of linear axis to 200.

    Untitled.jpg

    Law 4th bar is not visible because the value of this bar is 300 which is excedding maxium. But I want the 4th bar to appear identical to 3 bar.

    How can I do this?

    Thanks in advance.

    Then you should change the value of Y to the maximum value.

    Another option, you should consider is changing the Render item column to reflect that the value is greater than the specified maximum value.

  • Object that can be bound but not updated when the value changes

    I have an object that is declared as [Bindable], which is updated in a component that is also declared as [Bindable] However, when the value is changed the user interface shows the change but the linked object never gets updated.

    Are there cases where related objects do not updated?

    Yes, as I said, pass the name of the property and the value in the change manager.

    Support rating allows you to set the value, not a switch statement. Some examples of code.

    Tracy

  • Machine Satellite U500 - 11G always disconnects when they surf the internet by LAN

    Surf the internet build-in the without wire is OK but it happens that the computer still disconnects during the use of the local network.
    Technician has checked the computer to test. It is suspected that it is a software problem.

    The suggestion is that the operating system is necessary to recover the machine at its initial stage of factory.

    However, as I do not have the recovery disk and I'll be gone to the United Kingdom for a period to extend I request the recovery disc to be sent to my home abroad. I will provide address details if this is the case.

    Any other solution to address the issue is welcome.

    Hi dl347,

    Before you think of reinstalling the entire operating system allow me to ask you if you have already updated the driver LAN and the BIOS? You can download the Toshiba site so you can do this anywhere:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    In addition, you can reinstall the OS using the Toshiba HDD recovery option. Go to the advanced boot menu (F8), select Repair my computer. Follow the instructions on the screen, and your computer will be reinstalled.

    By the way: the recovery disk, you have to create yourself. Did you do that?

  • relaxation led when the value is greater than

    Hey everybody! I have to do a project and im stuck because I'm a noobler with regard to labview. I'm using labview 6 and got to watch the pressure and temperature of a reactor in time. I need to create a system in which if a value is greater than it triggers an alarm (perhaps led can show it) or is less than a certain limit. I mean it should trigger an alarm when the temperature or pressure is beyond 100 and less than 10. And after that to generate a text document in which it is specified the time and date at which these values were exceeded. I also use randomly generated values. Can I get help please? I'm not manage it by myself)

    Line and force. as Norbert said.

    You won't get much sympathy on overloaded around here.  Three things occurred to me that I read your messages:

    1. You will be in trouble when you get a job if you think that you will be not always charged.
    2. If I help you, you'll probably end up working for me and I still have to do your homework.
    3. You'll be fine.  Engineers outsource their work all the time.

  • APEX submit changes to the database when the value is changed in Javascript?

    Hello

    IM new at the Apex and use v4.1.

    What I want to do, is to have a tabular presentation that will have 5 fields and a number of fields only reading based on a SQL table & reviews, when a user updates one of the 5 fields entry I want to save the change to the databases automatically.

    I thought that this could be done using Ajax and Javascript, but my knowledge is not at a high enough level to make it work.

    I think what I need to do:

    1 create an AJAX callback process (say its called "Submit Changes") - it comes to PL SQL that will update the database based on the value of the field that was changed. I think that this will require the number of line in table form to pass in.

    2. create a header HTML with Javascript code that calls the recall AJAX process - I found the below on the net, but do not think that I changed it correctly:
    < script type = "text/javascript" >
    function Submit_Value() {}
    var ajaxRequest = new htmldb_Get (null, & APP_ID., 'APPLICATION_PROCESS is Submit Changes', 0);
    var ajaxResult = ajaxRequest.get ();
    Alert (ajaxResult);
    }
    < /script >

    3. change the attributes of elements ' "on the column compared to something like onchange ="Submit_Value () ";

    So far I have not been able to get this working and would be grateful for any help or suggestion.

    Thank you

    Goes

    just a quick thought: I myself remember in 3.x days by using a process with a space name did not work (at least when I was trying to use), I have always since then named such with underscores in the... IE: submit_changes the two (the name of the process in the apex) and the reference of the code in javascript

  • How to set the limit function, means I want defined logic that when the value is between 0 to 0.3 loop and then stops.

    Hello

    I'm looking for the logic as the way to define the logic of upper limit and lower limit.

    Means that there is only one indicator of entry in which a user can enter any value, I want that when the user gives value between 0 and 0.3 for example while then loop will stop other wise, it will work on an ongoing basis.

    Please guide me.

    Thank you very much.

    Please consider the VI below.

Maybe you are looking for