Intel 82579LM NIC on the Portege R830 does "Promiscuous" mode?

Similar Questions

• Error Code 10 Intel 82579LM LAN connection on Portege R830 - 13 c

  After the recent update 32-bit Windows 7, the connection to the local network cannot start (Code 10) in Device Manager

  "This device cannot start. (Code 10) »

  I tried to uninstall drivers / back / and install which follows Toshiba support page files, but does not solve the problem.

  lan-20110330164846
  brahim-20110331130330

  How Intel 82579LM Gigabit on Portege 830-13 C of working network connection?

  (wireless is fine)

  Hello

  Error code 10 is generated when the Device Manager cannot start the hardware device and usually its caused by obsolete or corrupt drivers.
  So I think that the driver installation should help solve this problem.

  I would recommend this as:

  -Go to Device Manager and uninstall the driver LAN
  -Restart the laptop but don t install the driver
  -Install the CCleaner and clean the registry
  -Restart the computer once more
  -Then go to Device Manager, select the network card (Ethernet controller) and install the downloaded driver

  As an option, I would recommend test page of Intel LAN driver.

• Re: Satellite A500-1f4 eco utility, intel RST, utility of the flash card does not

  Hello
  my name is Ashraf Shahin I own a Satellite A500 - 1f4.yesterday I installed the new BIOS update to 1.50 on the site of toshiba, and after that my eco utility, displaying flash cards, intel RST service are not running.please help me

  Concerning

  Hello

  Enter the Bios (f2 on startup), check advanced option of... Function activated buttons. Alternatively, you can try to load default settings. Press F10 to save and exist.
  If still have problem, try Vap, support of flashcard, eco:

  [Toshiba drivers | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

• 3G modem is suspended in the Portege R830

  Hello

  3G modem in my device works not so stable - after a bit of sleep or power they no longer and I have to restart the laptop to make it work. Anyone have similar problem?

  Thnaks for the help!

  Kind regards
  R.

  Have you tried disabling the power saving for 3G modem?
  This could be done in the Device Manager-> 3G modem-> properties-> last tab (power management)
  Then you should uncheck the option called system turn off the device to save energy

• Disk error when you exit the Portege M100 in standby mode

  Hello all :)

  Have a Portege M100 for general use with WXP Pro installed.
  Recently decided to upgrade to a DVD - rom DVD burner, then bought a Sony DW-Q250A burner.
  Installed and it worked, but I continue having problems when the computer wakes from sleep, I get the message "ERROR #1 IDE", while the system reboots without additional probs in windows

  The problem is, once this happens, the DVD player then disappears from the window 'my computer' and is not visible in the "Device Manager", until I remove the disc, back up and then analyze for pop. "p in Device Manager devices, it reappears as nothing has happened."
  I thought it might have been a conflict with the IDE bus (ie the two - disk HARD & DVD - disks configured as master) so I put a rider on the HARD disk to make the slave drive (which looks like to mean a change of firmware on the DVD drive for this) but it just created more probs... Then I got a message "ERROR of IDE #0" extra when I did and the machine would not boot from the HARD drive.

  Any thoughts would be welcome? :|

  Mark

  Hi mate,

  "first of all I would like to explain the IDE #0 error: it s quite understandable given that the HARD drive is the * FIRST * player of all and must stand the * FIRST" by car, which means that you jumper shouldn´t to a slave drive. It must be a master, otherwise, as in your case, the boot of won´t machine.
  in
  So you have 2 IDE channels (primary and secondary IDE channel), and each channel has a master and a slave. Apart from the HARD drive that is located on the main channel, your DVD player is naturally on the secondary channel configured as the master drive.
  Here´s a bit 'image': D to explain it:

  -> Primary channel-> Master = HARD drive
  -> Slave = nothing

  -> Secondary channel-> Master = DVD
  -> Slave = nothing

  Regarding your problem:

  I have no definitive solution for you, but I can give you some advice. First download the latest BIOS for your machine and upgrade to the latest version. Then download the latest drivers and install them. After that, look for an update of the firmware of your player of DVD and last but no less check the database of microsoft for known issues as any of the similar issues are known for me with drives toshiba toshiba machines.

  Would be worthy to try

  :)

  See you soon

• Portege R830-10v / i7 / change internal SSD 225 GB

  Hello

  I need to change my flash drive SSD internal 225 GB for a 512 GB SSD!

  What should I do to the hardware and software level?
  Can I take any SSD?

  Thanks for the help?

  Best regards, Florence

  The HDD or SSD drive update requires no special modifications in the software or hardware.
  You need a compatible player SATA SSD 2.5.

  Here is a nice and very useful document how to upgrade / replace the Portege R830 & Satellite R830 series SSD or HARD disk drive.

  http://APS2.toshiba-tro.de/KB0/CRU18037E0000R01.htm

  Of course, after this upgrade, you'll need to install the system new the best choice would be its use or recovery disk and recover the laptop to factory settings.

• Portege R830-138 wireless card

  Hello

  Nobody knows what the wifi card in the Portege R830-138?

  I am trying to install the driver after a wipe and a clean install of Windows and can't determine if its Intel, Broadcom or Atheros Variant.

  Thank you

  Hello

  "I think that the laptop supports Intel 802.11(a/g/n wireless network card).
  But you can check yourself by using this statement:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  Welcome them

• Portege R830 - Toshiba DVD Player missing

  Drive DVD - Portege R830 (03N00701)

  I can find no trace of the software Toshiba Video Player or Toshiba DVD player. My dealer told me simply that "they probably don't put more ' and told me to use Windows Media Player. Still the .pdf manual has clear instructions to use it.

  I'm supposed to have a Toshiba DVD player on board and if not, what can I download online?

  G Hey Lauri

  According to the specification for the Portege R830 series you should have The Toshiba DVD Player software.
  However you can download it here,

  [http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK]

  I have not used because I used to use a freeware prog. called VLC because it plays one of these video file formats that I tried on it.

  I have Satellite R830-143 and relatively speaking, it has the same specifications as the Portege and had the DVD player when I bought it a month ago.

  Seems dealers will tell you anything without even bothering to check.

  Best wishes

• VMs and vswitches shared using the "Promiscuous" mode

  We are in the middle of setting up our new VM environment and you want to include Symantec Web Gateway virtual appliance. Must the vswitches (vNIC) use promiscuous mode. The problem is that all of my physical network cards are distributed between 4 virtual switches. No other virtual machines require promiscuous mode. When you set this mode on a vswitch, how will this affect the other virtual machines using the same switch? "Promiscuous" mode can be set on the switch and only ebabled to the virtual machine?

  I'm under esxi 5 and 8 network adapters in the servers of my host. There are 4 configured vswitches, one for management, data traffic, one for vmotion traffic and one for our DMZ.

  Thanks in advance

  You can create a separate virtual machine for this virtual machine port group and set security for the virtual machine portgroup activating the mode of promiscous-only activate the promiscous for virtual machines will be connected to the VM Port Group

• Need to check the update of the BIOS Portege R830 without Intel TXT

  Hello Forum,

  I have exactly the same problem as described here 2 years ago:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

  I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
  Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
  I can only 'hide' which does not help.
  I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

  TPM is not active if...
  I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

  I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

  In any case...
  A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
  Unfortunately, that this file has been deleted on 2shared.com

  can someone please provide this file (or an update of the bios later) which resolves this issue?
  Thanks in advance.

  Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

  You can download older versions of pages driver Toshiba BIOS.
  For example: http://www.toshiba-asia.com/sg/support/drivers

  On this page of Toshiba Asia I could find all the BIOS for this Portege model.

• Portege R830-138 - does not connect to the SharePoint Site: 401.1 error

  Recently bought a Portege R830-138, but I am getting it to connect to our Service businesses - SharePoint Site I receive a "error HTTP 401.1 - Unauthorized: access denied due to credentials not valid." message.
  The laptop has a full internet access and we have access to the server that is running the SharePoint site by using the same credentials via Remote Desktop. Can also connect to SharePoint site of any another machine using the same credentials.
  Services SharePoint runs on a server with OS - Windows Server 2003 Standard Edition with SP2

  The IT support checked this knowledge of MS doc?:
  + You get a "error HTTP 401.1 - Unauthorized: access denied due to credentials not valid" error message when you try to access a Web site that is part of an IIS 6.0 application pool +.
  http://support.Microsoft.com/kb/871179

• Portege R830 had dead blue when the screen connects to wifi or shared internet

  It seemed began as soon as the automatic update from Microsoft on Qualcomm, Atheros, every time when connect to any WIFi, share internet, my portege R830 shows blue screen and the following error message:
  unhandled system_thread_exception (athwb.sys)

  I found that I am not the isolated on the Web site. I tried to remove and stop updates. However, once I connect to the internet, the blue screen comes back.

  Is the problem because of the network adapter? The model is Qualcomm Atheros AR9002WB
  Can solve the problem if I download the new driver of Qualcomm-Atheros site? Or if I replace a new adapter?

  The athwb.sys file belongs to the Atheros wireless driver. Usually placed in C:\Windows\System32\drivers\athwb.sys
  It seems that in your case this file causing the BSOD.

  I found a very interesting detail about this problem and why it seems.

  A user wrote:
  {quote} The issue is due to a database hosted on Linux kernel mapped NAS drives and if the Client for NFS is installed on the windows machine. For some reason, this configuration does not work. If you mount your shares and NFS is installed it tries to use the NFS client and fails miserably. Trick is to disassemble all the shares of logging in Safe Mode and then rebooted and uninstall the NFS client and then mount your shares. {quote}

• Re: Portege R830 eSATA - failure to mount the external hard drive

  {color: #000000} I have a new Portege R830 with combined eSATA / USB port. It will recognize an external drive in as drive 0 Device Manager but does not mount the drive under Win 7 x 64. The road rises and works absolutely normally under USB2 via the combined port or one of the other ports on the PC. The player works absolutely normally under eSATA on another desktop PC Win 7 x 64

  Search Internet suggests that this is a widespread problem with Win 7, but given the above commentary to normal operation on my desk, strongly indicates that it is "simply" a laptop Toshiba driver problem Win 7 x 64.

  A workaround solution that someone had reported was to boot the PC with the drive connected. This will lead to the PC mount the drive, but I found to be unreliable - tends to freeze the unpredictable machine, but when logged in it showed he was transferring data at a reasonable speed.

  The search for these forums, no solution has not identified... Toshiba - think you should answer it please!

  Afetr all is a 'feature' significant on the Portege and rather defeats the point if it is impossible to use...

  Kind regards

  Kevin {color}

  Hi mate

  First of all, it is a forum for a user to this don t address issues from Toshiba here in the forum, but other users of this community.

  Back to your question; Does this mean that the HARD drive connected to the eSATA port cannot be recognized as device eSATA but USB device?

  Please check if you are using the latest version of the BIOS. On the European driver Toshiba page, you can find the BIOS version transferred to 29/07/11.
  In addition, I recommend to check the BIOS settings; check if eSATA is activated it.

• Portege R830 - Windows does not start after I have install Comodo Firewall

  Good afternoon

  I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

  So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

  Any help would be apreciated.

  Hi jillefsky,.

  Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

  Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

  But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?