Intel ac 7260, radio, win7 64 bit, compaq 15-a026sg

Similar Questions

• Intel ultimate-n 6300, radio, win7 64 bit, compaq 15-a026sg

  An operating system is and must be Win7 Ultimate 64 bit sp1
  Computer: Compaq 15-a026sg, i5 - 3230 m.

  Intel Centrino Ultimate-N 6300 AGN card:
  PCI\VEN_8086 & DEV_422B & SUBSYS_11018086 & REV_3E
  PCI\VEN_8086 & DEV_422B & SUBSYS_11018086
  PCI\VEN_8086 & DEV_422B & CC_028000
  PCI\VEN_8086 & DEV_422B & CC_0280

  The map works without problem in Ubuntu 14.04 on this computer and running Windows 7 (64-bit), I see only key f12 with orange LED.

  The same situation on this laptop is with intel ac 7260 (' http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Intel-ac-7260-radio-off-win7-64bit-c,').
  Maybe someone knows what card works fast and stabile with this laptop, please?

  Ok. Now, I have a solution: https://www.youtube.com/watch?v=yzAKcmlaH1M

  Covering 20 PINS with a Ribbon according to the film and a LED in the f12 is still orange, but the card now works under Windows 7 64-bit.
  This means that in the BIOS there is a whitelist and it is a problem only on Windows and not on GNU/Linux:-D.

• Compaq CQ58 - 299EV model of updated video card and driver for win7 64 bit and ram upgrade

  Hello

  Since I was my compaq laptop (about a year), it was windows 7 64 bit operating system inside, even if the manual was for windows 8. So, when I looked up initially for up-to-date drivers I couldn't find support for win8, but I chose not to because I saw tons of compatibility issues with this model of laptop. Well I don't want to update soon, so I would like to know what are the latest drivers I can find for my model for win7 64-bit.

  So, what model of video card has it built in (it just says: "Intel(r) HD Graphics"), so I can find the right drivers for it?
  Also can I put my ram? There are now 2 GB.

  Thanks in advance.

  Since it is a Celeron processor it comes:

  Intel HD Graphics (on models with Intel Pentium or Celeron processor; supports DirectX 10)

  They don't give him a number. The processor is based on the Sandy Bridge architecture, so any driver for the video card HD 3000 series will work.

  Latest version of the Intel driver

  This can take up to 8 GB (2 x 4 GB) DDR3-1333 SO-DIMM, like this:

  http://www.Amazon.com/Samsung-PC3-10600-1333MHz-so-DIMM-upgrade/DP/B003XN3BZC/ref=sr_1_1?ie=UTF8&QID=1413330996&SR=8-1&keywords=DDR3-1333+so-DIMM

  Here is the Manual:

  Manual

  See page 45 for the upgrade procedure.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Intel PROSet/Wireless Software unavailable for Win7 32 bit

  On this [page Toshiba | family = 2 http://www.toshiba.eu/innovation/windows7_drivers.jsp?service=EU&selCategory=2&selF & selSeries = 152 & selProduct = 7954 & selShortMod = null & language = 16 & selOS = 29 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = nes allMachi & search = & action = search & macId = & country = all & page = 2] I downloaded the 'Intel PROSet/Wireless Software' for Win7 32 bit file, but when I try to install it it says 64-bit operating system is required.

  The driver of the Web site for intel does not work.

  It is a software Intel Wlan (not WLan driver)
  You can download it directly from the Intel page and it works since it worked on my laptop too.
  http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034041.htm

• WiFi on E6420 Win7 64 bit driver

  This laptop came with Win7 32 bit on it.  The standard company is Win7 64-bit.  I installed it without any problems except for WiFi: when I installed the driver I get this message in the Device Manager Properties window and the WiFi radio does not work (Software Intel says no device does exist):

  Windows cannot verify the digital signature for the necessary drivers
  for this device. A recent hardware or software change might have
  installed a file that is signed incorrectly or damaged, or may
  be malicious software from an unknown source. (Code 52)

  The device is Intel Centrino Advanced - N 6205.

  Is there an updated driver I can install to make it work?

  Thank you

  John

  Vatchy,

  Please try to read...

  http://www.TechSpot.com/VB/topic127187.html

  Rick

• Win7 64-bit (pre-installed original), recovery for the 32-bit dvd disk

  I just bought new laptop toshiba L500-208 recently. And I have absolutely no idea how to deal with this new kind of things! Please help me!
  I had a number of compaq for 5 years, when I have the format window just use 1 cd and this finished!

  But now that I do not understand I have win7 64 bit (when I bought it), but I have the 32-bit recovery disc.
  I want to know that if I portable format and use this recovery disk, I won't lose 64 bit, right?
  What happens if I have 64 bit for installation next, what I have to do? Please help me too...
  Thank you very much!

  Hello

  The situation is simply. If you check the market of PC and laptop, you will see that new products will be offered with operating systems 64-bit.
  So, the production of software goes slowly in that direction.

  Toshiba offers all new notebook with 64-bit operating system, but also provide you with the 32-bit version if you feel comfortable with it and if you want to use some software not designed for 64-bit operating systems.

  Your laptop comes with the HARD drive recovery image and if you read s manuals you can find info you need to create own recovery DVDs.
  This can be done with the preinstalled Toshiba Recovery Disk Creator. The shortcut for this tool, you can find on the desktop.

  So, before you anything please create this installation disc. After doing this, you can install the 32-bit version and use so long desired.
  When you want to have the 64-bit version to use the new created the recovery for the installation disk.

  I hope you now understand how it works.
  If you have any other questions please let me know.

• Need to Win7 32 bit drivers for Satellite C660-1MP

  I recently bought by Satellite C660-1MP
  Product Code PSC1NE - 006004G 5

  I bought Windows7 32 bit

  I tried 32 bit drivers on the toshiba site and there is no 32-bit. I tried vain to 64-bit.

  Please advice if you have the correct drivers. I canoe install the 64-bit version caused you some conflicts between applications.

  You are right. Drivers for Win7 32-bit are not available. But there is one interesting thing: your laptop has Intel HM65 Express Chipset, this chipset is offered on several other models and none of them are supported for 32 bit OS.

  I tried to find something but unfortunately without success. I'm sorry. Try to find the driver on Intel support page. If you have made know us. We can try to find other important factors.

• Portege R600 and Win7 (32 bit): driver WLAN is missing from the site

  I will install windows 7 on my R600, I am currently downloading the drivers on the Web page. However, on http://aps2.toshiba-tro.de/wlan/?page=downloads there is no driver for my Intel PRO/Wireless card.

  Should what drivers I use? The 32 bits of vista are probably the closest?

  Just use driver for Win7 32 bit. This is the version 13.0.0.107.1
  Have you already tried to install this driver?

• HP 14 d037TU drivers do not work for WIN7 64 bit

  Hello

  Please help me solve the problem. HP 14 d037TU drivers do not work for WIN7 64 bit as below. I have try all means possible to install WIN7 64 bit player but no luck. I assume that the reader has not been certified for WIN7 64 bit.

  HP, it is not accepted as HP is one of the famous brand laptop with cart and incomplete product on the market.

  Please help to fix this.

  

  Hello:

  I just found the Holy Grail.

  Here is the link for the usb 3.0 driver, you need to know.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 3467 & DwnldID = 23734 & Keyword = USB + 3.0 & lang = eng

• Former need graphics driver for Satellite L650 Win7 64 bit

  Hello

  I'm looking for a version of the graphics driver for my machine odler. The current on causing havoc in one of my CAD applications. I am currently runnign with material support that is sloooooowwwwwww... Any ideas where I can download a former?

  Also, I can't find where to change the graphics memory allocation. Can someone tell me where I could do this?

  See you soon

  Is this the same issue as described under http://forums.computers.toshiba-europe.com/forums//message.jspa?messageID=217413?

  I mean why there are two identical topics?

  In any case, you need laptop with factory settings, preinstalled original Win7 64 bit? What graphics card has your laptop? ATI or Intel? What version is older than the version preinstalled on your laptop via Satellite?
  Your model of laptop is more recent and all the drivers, that you got in the recovery image are essentially the same as drivers on the Toshiba download page. So I think t is old version proposed by Toshiba.
  For example, if you have the graphics card Intel initially we version 8.15.10.2086, the same as on the download page.
  Can you confirm this?

• 15 - n015et Pavilion Win7 64 bit driver

  15 - n015et Pavilion Win7 64 bit driver problem?

  I can't find the driver please help?

  Hello:

  HP only provides support and drivers for Windows 8 on its new consumer notebooks.

  If you want to install windows 7 on your model, then you need to find the drivers from all over the place.

  Before installing W7, first make your recovery media set by reading the info on the link below.

  http://support.HP.com/us-en/document/c03481733

  You can use most of the drivers of this model, except the audio and graphics.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5405371&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4058%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  For the graphics, you need a two-step approach.

  1. download and install the Intel Graphics driver from the link below.  The first file listed.  Then restart.

  https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=3719&DwnldID=23405&ProductFamily=Graphics&ProductLine=Desktop+graphics+drivers&ProductProduct=4th+Generation+Intel%c2%ae+Core%e2%84%a2+Processors+with+Intel%c2%ae+HD+Graphics+4400&DownloadType=Drivers&lang=eng

  Then, install the Nvidia graphics driver from the link below.

  http://www.nvidia.com/download/driverResults.aspx/70187/en-us

  Audio.

  Accept the agreement, download and install the file second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Win7 64-bit static paired unintelligble wireless Bluetooth

  so I'm rolling an Azio dongle for bluetooth 2.1, which is the format max supported by my headset h720 motorolla on a win7 64 bit installation. Using steam and other programs for voice chat, people are constantly telling me that I'm too garbled to understand, I have confirmed this with a listening test. Windows correctly identified my helmet and connects without a problem.

  I tried recommendation of Azio which is to install the toshiba bluetooth stack and it detects and connects to my headphones intermittently at best and in these circumstances, the microphone does not work.

  I tested the helmet via Skype on my galaxy tab 2.0 7 "and on my Nokia 920, my voice on these devices is clear like a solid phone call. That is much better than what I get on Steam. If the headset is not the problem.

  It seems to me that the problem is either a crappy on the dongle bluetooth radio or some kind of internal driver problem. evidence of the latter: when I open sound > recording > motorcycle 4720 > properties > advanced the bitrate dropdown is grayed out and defined for 16-bit 8000hz and Interestingly, 1 channel, but the headset has 2 microphones according to the packing. The two exclusive options are checked. Reduce the input levels (on this plate) seems to help a little.

  Ideas?

  Hello

  Thanks for posting your question on the Microsoft Community.

  1. Have you tried a different Microphone Bluetooth to connect to the computer?
  2. Other Bluetooth devices work well?

  I suggest to check the following link and check if this is useful:
  Bluetooth devices do not work correctly on a computer that is running Windows 7
  http://support.Microsoft.com/kb/980396/en-us

  Please return with the required information.

• I have Win7 64 bit and keep losing the internet connection. Convenience store says no istalled network adapter, the same as the one I use now. Dees wireless router is Belkin WN311B > yet my i pad tracks fine.b

  I have a Dell Studio XPS9100 with dual core to intel 2.8 GHz running Win7 64 bit & Belkin router WN311B wireless + wireless adapter. My complaint is that I continue to lose internet connectivity. I quit the program & run the troubleshooter who told me once the wireless card is not installed. I tried to reset the modem & without any result. Sometims you can disconnect & connect internet and reconnect.  My pad on the same system I have no problem. Please help, what is the problem.

  Hello

  Have you made changes on the computer before this problem?

  This problem may occur because of driver or network connection settings.

  Try the following and see if it helps.

  Method 1:

  Refer to the steps in the following Microsoft article and check if that helps.

  How can I troubleshoot network card?

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. Click Start, type ncpa.cpl, and then press ENTER.

  b. right click on your wireless network connection, then click Properties.

  c. click the wireless networks tab.

  d. under preferred networks, click your wireless network, and then click Properties.

  e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Method 3:

  I suggest that you do the following and check if it helps.

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  Hope that the information provided is useful.

• How do I fix/remove registry errors and redundency in win7 64 bit

  I need assistance with directions to help me eliminate some errors of registry and redundencys and also some unnecessary files and some ghost and unnecessary services on my win7 64 bit computer.can lenovo someone help me thanks

  Hello

  If you pay attention to the registry cleaners or the system too much hype
  Optimizers don't. Think of those as oil of snake that are more likely to
  cause problems while fixing anything. If you are not likely to have the registry
  Mistakes and certainly not ghost services.

  If you experience problems with system performance using this utility
  below and ask questions in these forums on specific issues.

  ----------------------------------------------------------------------------------------------------

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I went from a Win7 32-bit on a 64-bit win7 machine computer. Now, I get "this connection is not approved" any solution? tried everything

  I went from a Win7 32-bit on a 64-bit win7 machine computer. Now, I get "this connection is not approved" on many pages, including support for Mozilla, Yahoo, send a mail to yahoo, etc. The only thing that has changed is my computer. Everything worked on the 32-bit system. I tried DELL-no-help, I tried Norton-no-help - I tried all published recommendations - nothing helped. Can someone give an explanation of how solve this incompatibility (presumed) Win7 64 bit computers? How can I quickly and absolutely get rid of MESSAGES "THIS CONNECTION IS UNTRUSTED"?
  Thanks for ANY help from an expert.

  Right after that I posted this problem it seemed the solution:
  I noticed a pop-up, named "BROWSERSAFEGUARD" who has attempted to set my computer to a "cleaner" for a price. I checked in my installed programs if there was a "Browsersafeguard" and he was there. I uninstalled it, check "incompatible with my system" and my computer turned on like never before. Lightning fast connections and no message more "this connection is not approved. Wow. It took me 7 days to find it. Hope this will help you, too. Send a message to this one to let me know if it solved your problem