INTEL FORTRAN COMPILE / VISUAL STUDIO FOR THE ASPEN SIMULATION

Hi all

I have little knowledge about the use of FORTRAN with application of this on VISUAL STUDIO. In fact, I know about these software because of the obligation for them to rewrite some code I had to rewrite before running on ASPEN Plus.

My problem is, I want to run a simulation Aspen Plus using the soft articles in question, but I honestly don't know how to go for them, as all this seems confusing. I have already installed the compiler FORTRAN and Visual Studio, but I don't know which platform to extract the entry codes I need to compile.

The codes that I needed to re - compile in Intel FORTRAN, which is compatible with the Aspen has been compiled previously using Silver frost 95.But FORTRAN, after compilation by using this software in Silver frost, codes does not work on Plus.It of Aspen was a few days ago I learned this can never work on ASPEN Plus Hence the need to install the compatible software.

(1) what it means to re - write a written code previously in Silver frost FORTRAN 95 or other FORTRAN codes in Intel FORTRAN compiler code and what is the procedure for that?
(2) after having rewritten in Intel FORTRAN codes codes using Intel FORTRAN compile, how I performs the following steps before finally launching the simulations using Aspen:
b compile the user model?
(b) models of the user shared a link in a Fortran Library procedure?
(c) provide the files objects or shared for the Aspen Plus system libraries?

Any positive contribution will be highly appreciated.
Gee right.

Hi, Ghislain law

Your message is addressed in the discussions on these Microsoft Community forums. It is better suited for the MSDN Developer audience. Please click on the following link and post your question in the appropriate forum.

MSDN forums: Index

http://social.msdn.Microsoft.com/forums/en-us/categories

Concerning

Tags: Windows

Similar Questions

  • Download of Visual Studio for 32 - bit

    Hello

    I can download Visual Studio 32-bit version for my windows 7 32-bit?

    If so can I have the link?

    Kind regards

    Naveen

    It's a good question, so I had to look it up and the MSDN Microsoft says:

    Visual Studio installs the 32-bit version of the appropriate Common Language Runtime (CLR) on an x 86 computer and the 32-bit version and the 64-bit version of the CLR on a 64-bit Windows computer. (Because Visual Studio is a 32-bit application when it is installed on a 64-bit system, it runs under WOW64.)

    We have already understood on WOW64 some time ago:

    The SysWOW64 folder (Windows on Windows) is where Windows keeps 32 bit copy of an application that may be required from time to time on your 64-bit system (files can be the same).  It makes sense that there might be files with the same name there so if a 32-bit version of a file is needed for any reason where Windows can find it.  There is no SysWOW64 folder on 32-bit systems.

    If Visual Studio is still 32-bit but will work on a 64-bit in the SysWOW64 folder system - that is why you are still able to run 32-bit applications on a 64-bit system.

  • Need a visual cue for the status of Plugins

    Need a visual cue for the status of Plugins:

    . . . "Ask to activate" - these are light gray - it's good

    . . . "Always enable" - should be in light green

    . . . 'Never turn on' - should be in red light - it currently goes to a slightly darker shade of grey

    Be able to sort them based on the State

    The above would make it easier to verify that they are the way you want

    There is only a ' true/false' = active tribute to work with, so you cannot always distinguish between activate and ask to activate.

    .addon-view[type="plugin"][active="false"]{box-shadow: inset 0pt 0pt 100px rgba(255,144,144,1.0)}
  • How can I write a Dll to perform a union in visual studio for use in LabVIEW?

    Hello

    I am new to writing dll. I am trying to write a Dll that will perform a union on a number of LabVIEW and then return the result in LabVIEW for my use. I've been struggling with this during a few days and I finally give in to get help.

    This screenshot is the only description I have to help me with what I'm trying to do. Basically, I'm trying to pass a value that will be different according to a measurement of partial discharge. In the screen below, the value used is '1061111989' this number is my reading. I need to pass that value of labVIEW in my dll to perform a union on that.

    In my Dll, I need to write the value of MeterReading.IntVal and to the MeterReading.FloatVal.

    I have Visual Studio complete 2012 2012 Edition LabVIEW full, I'm LabVIEW CLAD and I wrote 17 floors of test to the United States to date. However, I've never needed Visual Studio so far. Can someone help me with this?

    Thanks in advance,-Chris

    Trying to create a Trade Union is stupid. Have you tried to make a simple conversion from type?

  • WHAT ARE THESE FILES IN MICROSOFT VISUAL STUDIO FOR & DO I NEED?

    I DON'T KNOW WHERE TO POST THIS QUESTION. I'VE LOOKED EVERYWHERE TO TRY TO FIND AN ANSWER - I LOOKED IN THE VISUAL STUDIO FORUM & DIDN'T SEE MY QUESTION HERE. I JUST NEED TO KNOW IF I NEED THESE FILES & WHAT ARE THEY? I USE THEM KNOWINGLY TO ANYTHING. THE ONLY MICROSOFT OFFICE PROGRAM I USE REGULARLLY IS A NOTE.
    SUDDENLY I HAD A SHOW PLACE FOLDER ON MY DESKTOP ONCE OPENED TAKES ME TO A FILE TO INSTALL MICROSOFT VISUAL C ++ 2008 REDISTRIBUTABLE. I INSTALLED IT & IT PUT A LARGE NUMBER OF FILES IN MY 'COMPUTER' FOLDER - NON AT ALL CERTAIN FILE, JUST BELOW ALL OTHER FOLDERS. THERE ARE 9 FILES EULA WHICH TALK ABOUT THE BETA OF MICROSOFT VISUAL STUDIO 9. I DON'T EVEN KNOW WHAT IT IS, SO MY QUESTION IS WHAT IS IT & DO I NEED? TAKES A LOT OF SPACE. IVE ALSO GOT A FOLDER FOR MICROSOFT VISUAL STUDIO 8 FOLDER IN MY PROGRAM FILES TO COMPUTER FOLDER - HAVE I NEED THIS

    Sunday, August 8, 2010 21:56:30 + 0000, VANITY999 wrote:

    I DON'T KNOW WHERE TO POST THIS QUESTION. I'VE LOOKED EVERYWHERE TO TRY TO FIND AN ANSWER - I LOOKED IN THE VISUAL STUDIO FORUM & DIDN'T SEE MY QUESTION HERE. I JUST NEED TO KNOW IF I NEED THESE FILES & WHAT ARE THEY? I USE THEM KNOWINGLY TO ANYTHING. THE ONLY MICROSOFT OFFICE PROGRAM I USE REGULARLLY IS A NOTE.
    SUDDENLY I HAD A SHOW PLACE FOLDER ON MY DESKTOP ONCE OPENED TAKES ME TO A FILE TO INSTALL MICROSOFT VISUAL C ++ 2008 REDISTRIBUTABLE. I INSTALLED IT & IT PUT A LARGE NUMBER OF FILES IN MY 'COMPUTER' FOLDER - NON AT ALL CERTAIN FILE, JUST BELOW ALL OTHER FOLDERS. THERE ARE 9 FILES EULA WHICH TALK ABOUT THE BETA OF MICROSOFT VISUAL STUDIO 9. I DON'T EVEN KNOW WHAT IT IS, SO MY QUESTION IS WHAT IS IT & DO I NEED? TAKES A LOT OF SPACE. IVE ALSO GOT A FOLDER FOR MICROSOFT VISUAL STUDIO 8 FOLDER IN MY PROGRAM FILES TO COMPUTER FOLDER - HAVE I NEED THIS

    Ouch! Please do not yell at us. We can hear you if you type normally,
    in different cases.

    Programming software is Visual Studio. If you do not, you do not have
    need him.

    But to be on the safe side, before deleting, why not burn these
    files on a CD? That way if something later complains of not
    Here, you can put back them.

    Ken Blake

  • Why my compiled exe asks for the location of the subvis when it is installed on a different computer?

    Hello

    I have a piece of deployable software, I developed and so I created two build specifications to produce an .exe file and a Setup program.

    The build for the installer specification includes the exe compiled and all the SubVIs necessary to reside in a subdirectory in the installation directory, and when it is installed on another computer, the SubVIs are in the right place.

    However, when I install and run it on another computer, a dialog box appears prompting for the location of the SubVIs, I select whoever he wants, and he then charge the remaining screws and works normally.

    Is it something to fundamentally miss the way SubVIs are called after using an installer, or y at - it a way to group them in the .exe or the installer so that I do not receive the dialog box?

    Many thanks in advance,

    Sam


  • UIX Visual editor for the development of the OAF?

    Hi all

    Please let me know if anyone has used the Visual Editor UIX for OAF pages developing using JDeveloper 10.1.3.
    Where can we find UIX Editor.
    What is a separate tool that must be installed or built-in sound with JDeveloper.

    It is not a Visual editor for pages of the OFA.

    You will have to wait for the next version of the ORACLE APPLICATIONS, I mean the version of Fusion which has not yet been published.

    The pages of the version of the merger will be personalized with an "overhaul" of jdeveloper (with an extension to interact with applications.) with a Visual Editor.

    Juanje

  • Dynamics of the instructions for the training simulation

    I'm looking for some advice with an idea for a dynamic list step by step for a training created in 7 Captivate simulation.

    The behavior by default when you create a simulation of guided training is for the steps appear in a text box is close to the click box. Instead, I want to stack the instructions step by step in a Panel on the left side of the screen that was sitting next to the interface simulated on the right side of the screen. All high-level steps could not be visible throughout the simulation, and every step in the list of the Panel would have highlighted where appropriate.

    I started with Knockout blog post of the Lilybiri ('create and use a Master 'Knockout' Blade'), which appears as a possible solution, but I have not yet arrived at the point to add my dynamic instruction Panel.

    In essence, the dynamic panel will work as follows:

    • Step 1 in the instruction Panel is highlighted at the beginning of the simulation.
    • Clicks of learning partners step 1 box click in the simulation interface (as shown in the instruction Panel).
    • During the click on box 1 click the step, step 2 in the instruction Panel is highlighted and step 1 highlight disappears.
    • Clicks of learning partners step box 2 click in the simulation interface (as shown in the instruction Panel).
    • And so on through all the steps listed in the instruction Panel.

    I work to make fun of something using variables and stocks advanced to reach the Panel of dynamic education and you want to superimpose on the left side of the screen. I think he would sit at the top of the left panel in the hole.

    Different positions, I saw that it is not advisable to insert a Captivate SWF in another project file, it seems that the Knockout of Lieve approach is the way to go. I am pleased to address the technical aspects of this on my own, but first of all, I would like to confirm that it is even possible with Captivate, or if it would be better to use a Flash. A that someone is doing something similar, or if someone sees no problem with this approach?

    Any comments or suggestions would be greatly appreciated!

    Thanks in advance!

    Nancy

    I think it is possible, Nancy, but not easily, and doubt that you will get complete instructions in this forum. What Captivate version do you use?

  • Need to i-studio for the camera

    Original title: i-studio

    I'm looking for i-studio connection to my camera.

    i - Studio 6
    http://i-Studio-6.downloadpipe.com/preview1328429, 1

    How to ask a question
    http://support.Microsoft.com/default.aspx/KB/555375

  • Numver of Visual Studio version history

    Hello

    It is a link to a list of Web pages where I can find the version number of Visual Studio for the simple and unique identify what Version of Studio, I'm running and which version is available... as:

    Visual Studio 2010 Express Version = 10.0.30319.1 RTMRel

    Hello

    Your question is beyond the scope of this community.

    Please post your question to the MSDN Visual Studio Forums.

    https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

    See you soon.

  • Establishment of environment of Visual Studio 2015 for the creation of plugins for InDesign CS6

    Hello, I am currently developing plugins for Adobe InDesign CS6 and I am currently using Visual C++ in Visual Studio 2015 and I can't import Adobe environment in visual studio, because the available guide refers to Visual Studio 2010.  Should which directory I pay to go to what parts of the SDK?  Thank you very much.

    directories.jpg

    Hi Jacob,

    Some tips for you, VS 2015 is not recommended for dev environment. CS6 InDesign plugin. You will meet all kinds of issues if you use for creating plugins CS6 2015, are some of the issues you may face

    1. Compilation or linking errors
    2. Random crashes, while the plugin is running, if you manage to get that much.

    The main reason for this is the different versions of libraries CRT used by different versions of VS, which used once all causes all sorts of compatibility issues.

    I would recommend that you follow the recommended by Adobe in the SDK VS version.

    Now in regards to putting in place the project settings, you must configure the following paths mainly to point to different paths of the SDK

    1. Include paths for the C++ compiler, these are directories that contain different header files. This will contain multiple paths, see the sample project SDK for more details
    2. Path for libraries that need to be linked to your project, see Linker of a SDK project.
    3. Include the path to the resource compiler
    4. Apart from this, you can also set the executable directories, as shown in the screenshot you attached. This is used to designate certain executables that are used during the accumulation of the generation of the project phase.

    You could refer to the sample project SDK for details, I would recommend that you base your new project on a sample project of SDK software for beginners and once you are comfortable with the settings, you can go ahead and write your own project to project depending on how you like to your Setup project the configuration files. For more details on how to write configuration files for VS projects to do a google search on it.

    Hope that this info gets you started.

    -Manan

  • WebWorks development through the deployment of visual studio plugin problem

    I developed an application WebWorks using the Visual Studio plugin, now after compiling the application, I have a series of .cod files, not. bar.  Documentation indicates that the blackberry - deploy command wants a .bar file to deploy the application on the Simulator.  I tried to just take all my program assets (images, js, css, htm files, etc.), the zip and compile them using the command line tool (bbwp), but I get a series of errors of syntax and then a final error (an exception through the JRE) indicating that it could not find the file necessary to complete the compilation bar.  Maybe I forgot something?  Any help would be greatly appreciated since I can't test this application, unless I can actually deploy in the Simulator.   The .cod file deploy the application I get an error indicating that there is no such thing as a specific file in archive (although I've specified a .cod file).  For some reason any I can't get this thing to deploy on the current device.  PLEASE PLEASE HELP ME! This part of the project is so frustrating at the moment, been working on the deployment of the hours now.

    I think it's because the config.xml file that was generated by visual studio for BB device and not the playbook.  You will need to create a file config.xml for the app playbook.  The simplest way is to each one of the webworks tutorials copy or there is an example in the 'Blackberry Webworks SDK - Table OS Development Guide'.  Here is the link http://docs.blackberry.com/en/developers/deliverables/24043/BlackBerry_WebWorks_SDK-Development_Guid...

  • Tracing with Visual Studio 2008 works only the 1st time

    Hello

    I use Visual Studio 2008 and TestStand 4.1.1.

    I have a c# dll and I'll call a function of TestStand.

    In VS, I "join to deal with...". "and choose to attach it to TestStand. I start my sequence and VS to get to the point break that I set myself in VS.

    Everything is great.

    Now if I "Stop debugging", I do some changes for my dll, recompile all right and reattach to TS, everything seems ok.

    But if I start my sequence, do not strike my breakpoints and step runs without me trace in my c# code.

    The only workaround is to close TestStand, restart it, reopen the sequence and reinstall VS on it, then works again my breakpoint.

    What's wrong? I wouldn't restart TestStand whenever I do change the dll and reattach. I tried to unload all modules also with no success.

    I do something wrong or solutions to avoid restarting TestStand after changes to the c# code and you want to draw it.

    Thank you.

    Hi Matt,

    First of all, I tried to replicate what you experience following your instructions, but I couldn't recompile the DLL after the stop debugging in Visual Studio, because the DLL was still in use in TestStand.  After I unloaded all the modules, I could recompile.  I then re-attached and saw what you were doing.  So, to get around him, I tied to the process in a slightly different way.  In Visual Studio, I went to tools' attach to process, and then chose the seqedit.exe process.  Before mounting, I pressed the Select button on the right side of the dialog box in the middle of changing the type of code we are debugging.  Select the radio button "Debug these code types" and verify that "Managed".  This will ensure that the debugger attaches only to managed code (c#).  After I did, I could run my sequence again without having to restart TestStand.

    I would like to know if it works for you.

  • How to develop an MDI application as the editor of Visual studio (multi tab)?

    How to develop an MDI application as the editor of Visual studio with the MULTI TAB that can be dragged from parent window?

    I used EnableMDITabbedGroups (true, CMDITabInfo) which creates a multi tabs, but does NOT allow to drag the tab of the window parent, unlike the editor of VC ++.

    In addition, he will honor the parent/child relationship normal (as normal to the MDI child windows) windows associated with the e-mail even after hanging out?

    Thank you

    PR

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

    After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

    I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

    Just curious if anyone has encountered this kind of slow startup time and found a solution.

    Thank you!

    I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

    http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

Maybe you are looking for

  • 17 j170ca - adding an SSD but no connector of envy?

    I want to add a second hard drive to this Envy 17 j170ca, but I'm surprised to see that is missing a cable/connector on the 2nd HDD slot.  I'm new on laptop, so these "tiny" cables are foreign to me. Someone can tell me what we call these cables if I

  • HP Diagnostics says: error code: BIOME-1. What is needed? Problem with RAM?

    My HP Pavillion wife has a problem, Windows Vista seems unable to repair. Diagnosis HP running I got the following error code on memory: BIOME-1, og videre: please contact HP support. Can someone tell me what this error code means. Is this a problem

  • How to combine (c) and (g) all [WINDOWS 8]

    my friend made a new volume (G and I still use it, my laptop started getting too slow and noticed that (C a 15.5 GB left 220 GB (this is not the system), so I wanted to know how to combine (G [not a 220 GB not used] with (C.)))) Yet one thing, my cap

  • Search does not work on Vista.

    The search is very slow and never find anything. Windows tried to fix it, but there are still 3 errors not processed do not. Message says indexing does not.   I tried restoring the system twice but he cut off before the end.

  • computer laptop dv7-6b01er with 1600 mhz ram

    Hello, I have a laptop dv7-6b01er with AMD-A6-3410mx and ram 1333 mhz. It supports 1600 mhz ram? We say CMSX4GX3M1A1600C9