Intel ProSet/Wireless Services event log has stopped working

I get this message at the start and ran the diagnostics and the hardware failure for the Intel PROSet / Wireless. Help! Thank you

Hello amaas1982,

You can try to reinstall the software for the Intel PROSet / Wireless and see if that will help the issue.
Download from the link here. You can also update all drivers and see if that helps.

If you're still having problems, then after, I suggest that contact manaufacter for support.
Click here to post your question in the Intel community forums.

I hope this helps.

Sincerely,

Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

Tags: Windows

Similar Questions

  • "HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING" THIS MSG TO POSTER AT STARUP WINDOWS

    "HOST PRECESS FOR"HOST PRECESS FOR SERVICES ARE WINDOWS HAS STOPPED WORKING"THIS MSG TO POSTER AT STARUP WINDOWS.

    WHAT THEN THIS WINDOW WILL STOP APPEARING?

    Hi yogesh,

    Thank you to contact Microsoft Community and we will be happy to help you with your concern.

    According to the description, you get a boot error message.

    This problem may occur if there are incorrect settings in Task Scheduler.

    Perform the steps mentioned below and see if it helps.

    a: Start Task Scheduler type in the search box and click on enter.

    b: Expand and go to the Task Scheduler Library -> Microsoft -> Windows -> CARS.

    c: Click the View menuand then enable Show hidden tasks (so that a check mark appears next to it).

    d: Right click RACTask (Windows 7), and select disable so that the status appears as disabled.

    Answer to us if you are having problems with the message error starting or any other issue of Windows, and we would be happy to help you.

    Good day!

    Hope this information helps.

  • Toshiba Service Station & cfFncEnabler has stopped working

    From the start I get 2 error messages.

    Firstly said that Toshiba Service Station has stopped working and then cfFncEnabler stopped working. Windows looking for a solution and will notify you when a is found.

    Close the program.

    Any ideas as to why and what can I do about these?

    Hello

    Hmmm maybe there is something wrong with both applications
    In such cases, it s always advisable to reinstall applications recommend

    The Toshiba Service Station is a stand-alone application and can be downloaded from the Toshiba driver page
    The cfFncEnabler seems to be a program that controls the FN keys.
    So, you will need to reinstall the tools that control the FN keys

    As far as I know this is a utility of Toshiba Flash Cards and VAP.

  • Host Service for Windows has stopped working - Help!

    Hello
    the last two days that I had problems when I start my computer.
    When it starts, it cannot connect to the internet & will not answer what it is (for example, if I click on 'my documents', it will not open).

    I have to restart my computer. When it re - start, it works normally.

    This is the message I get from the section 'reliability & history problem ":

    The service host for windows, stopped working

    Description:
    Application of vulnerabilities path: C:\Windows\System32\svchost.exe
    Signature of the problem
    Problem event name: APPCRASH
    Application name: svchost.exe
    Application version: 6.1.7600.16385
    Application timestamp: 4a5bc100
    Fault Module name: ntdll.dll
    Fault Module Version: 6.1.7601.18247
    Timestamp of Module error: 521ea91c
    Exception code: c0000005
    Exception offset: 00052d 94
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 2057
    Additional information 1: 0a9e
    More information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional information 3: 0a9e
    Additional information 4: 0a9e372d3b4ad19135b953a78882e789

    Additional information about the problem
    Bucket ID: 3883285962

    Can someone help me with this problem?
    Thanks in advance

    Hello Mark,

    Thanks for the reply.

    And I apologize for the inconvenience.

    You can try to proceed with the clean boot follow the link below and see if that helps.

    How to perform the clean boot in Windows

    http://support.Microsoft.com/kb/929135

    Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.

    I hope this helps. Otherwise, feel free to write us back with the results and we will be happy to help you.

  • Microsoft Wireless Mobile Mouse 3500 has stopped working

    My wireless mouse has stopped working. The green light at the top is, but the blue light down below will not be displayed. I can push buttons and he will answer, but when I try to move my cursor I get nothing.

    Hello

    I tried new batteries?

    Looks like the mouse has problems.

    Wireless Mobile Mouse 3500 - has a 3 year warranty.
    http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=019&active_tab=systemRequirements

    Microsoft Hardware warranties
    http://www.Microsoft.com/hardware/warranties.mspx

    These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
    contact Microsoft at the number below.

    Hardware support of MS and warranty claims
    Tech Support 1-800-936-5700 for MS Hardware.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Wireless Mobile Mouse 3500 has stopped working

    My 3500 mobile wireless mouse has stopped working. Someday, that my mouse does not work all of a sudden. The led on the mouse is on, and the mouse has a new battery. I tried to plug the receiver most in each usb port and on another computer and still nothing.

    You did all the good troubleshooting and my conclusion is that you have a dead mouse, it happens, if it is still under warranty it resume.

  • Windows Service host process has stopped working... online and are looking for a solution

    I have a Lenove with Windows 7 Home Premium 64-bit of the system.  Yesterday I got stuck in a loop while looking for a dog boarding on Google.  I had to do a system shutdown to break out of the loop.  Since then, I get the message: «Host process for Windows services has stopped working...» "Also, I heard the music or script play twice since then and did a reboot to get rid of the problem.  I don't know that it will continue if I do not resolve what has caused the problem initially.  Also, I went into the control panel one checked all the sound icons and they are all OK.

    I'd appreciate if someone could give me some instructions on how to solve these problems.  Thank you!!

    Click on Start and open the Control Panel
    Click on System and select Advanced system settings in the left menu.
    Under performance, click settings.
    Click the Data Execution Prevention tab, then enable DEP for all programs and services except those I select.
    Select the check box next to the program that you want to turn off DEP for and then click OK.
    For older (if you want to turn off DEP for IE. Click Add: enter OS 32 bit (Internet program
    The Explorer and select iexplorer.exe) | 64 bit OS (Program Files (x 86) \Internet explore and select iexplorer.exe)
    Select the check box next to the program that you want to turn off DEP for and then click OK.
    Restart the PC and use the IE32 again
    Note: You can not set DEP to 64 bit IE
  • "CCP registration Service server application has stopped working".

    For two days I received the following error message: "check of the CDP server application has stopped working". I reloaded the software (after research, it seems to be one of my suppliers of USB) and still get the message. Someone at - he a clue as to what then? I am still under Windows Vista 2007.

    Hello

    What software you have reinstalled?

    Perform the clean boot and check:

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135


    Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  • When I turn on the computer, I get this message - COM + Event System has stopped working. How can I activate this return?

    I had virus protection total defence installed. This occurred immediately after.

    Hello

    Thanks for your answer to my question. I was about to start step 2, by performing a boot minimum when a message pops up informing that 2 programs were slowing down my computer and also to stop because they were also running. Ironically, these programs I've ever used has appeared on my computer advertising protection against viruses and to speed up the computer.

    I did not purchase the license if it comes to start up all the 3 or 4 days telling me that my computer is slow.

    I uninstalled both programs, which I won't mention for obvious reasons and the event system Com + message did not return after the computer has restarted 3 times. Apparently, the problem has been resolved, but I will continue to have oversight. If the problem returns I'll restart and inform you about the results.  Thanks again for your expertise. guavaridgemb

    Thanks for posting your question in the Microsoft Community.

    I understand that when you turn on the computer, you get an error message indicating that COM + has event system stopped working. Correct me if I'm wrong.

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    Please follow the steps and check the question below:

    Step 1:

    Check the event viewer for the logs of error from the links below.

    Open Event Viewer:

    http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

    What are the information in event logs? (Event Viewer):

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

     

     

    Step 2:

     

    You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

    To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

     

     

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
    http://support.Microsoft.com/kb/929135

    Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

     

    Step 3:

     

    Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

    http://www.microsoftsafetyscanner.com/

     

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

     

     

    Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

     

  • wireless mouse 3500 scroll has stopped working

    I use a 3500 since May 2010 wireless mouse but the scroll started an abnormal behavior. When I move the mouse wheel it scrolls to the top step and then scrolls a step to the original position.

    I've updated the drivers after problem, I got later. But the problem persists.

    Hello

    Looks like the mouse has problems.

    Wireless Mobile Mouse 3500 - has a 3 year warranty.
    http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=019&active_tab=systemRequirements

    Microsoft Hardware warranties
    http://www.Microsoft.com/hardware/warranties.mspx

    These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
    contact Microsoft at the number below. (If it is defective they usually replace.)

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • EVENT VIEWER HAS STOPPED WORKING!

    My OS is Windows 7 64-bit, 800 GB hard drive and 2 GB of RAM right now. I played an old game on a CD and then it just crashed. I opened the event viewer for the resolution of problems and it says check if Event Viewer runs.

    I am totally astonished that this happened because I have read this on forums but, it was for Vista only. Any suggestions would be welcome and one that works, I'll answer for your expertise. Thank you...

    Shekhar s,

    I want to say thank you very much for the 100% correct answer, you sent me. I thought I had to do a complete restore with the Installation diskettes.

  • My Microsoft Wireless Mobile Mouse 4000 has stopped working!

    My Microsoft Wireless Mobile Mouse 4000 was working the other day and now won't work.  I tried batteries, turning power on and off, press and hold the bottom of the mouse USB and taking even the USB key.  I have a Windows 7 computer, I don't know how relevant this is, but I thought I should put it here anyway.  ANYONE HELP!

    I had the same problem and this is what worked for me:

    remove the USB transceiver

    Open the DEVICE MANAGER

    Right click on the MOUSE AND OTHER DEVICES of SCORE and choose SCAN for HARDWARE CHANGES

    Click with the right button on USB BUS CONTROLLERS, and then select SCAN for HARDWARE CHANGES

    Insert the USB transceiver

    Your computer should detect the mouse and function properly

    I have to repeat this process pretty much whenever I start my laptop, but it is only a few steps and not really a huge nusiance.

    Good luck.

  • Click the event Script has stopped working. Help, please!

    I must have forgotten a step in the preparation of an email button that will extract the data from a field in the subject line of an e-mail and I would like to create the body of an email.

    I'm taking a button and adding a click event to:

    var Mailto = " " [email protected] "; "

    var BetreffSubject = Legal_Name.rawValue;

    var NachrichtMessage = "it's 1.\r\rConfidentiality line opinion! \rThis is the beginning of the third line ';

    var email = ' mailto: ' + Mailto + '? Subject = Report Site for "+ BetreffSubject +"& Body ="+ NachrichtMessage;"

    event.target.submitForm({)

    cURL: Mail,.

    bEmpty: true,

    cSubmitAs: 'PDF '.

    });

    When I click on the button, nothing happens.  what I am doing wrong?

    Hi RudyLou36,

    Please download the file https://workspaces.acrobat.com/?d=0n * uLjnmLGX8VlHRCW5n7A and check the click event of the button "control of email through script.

    Kind regards

    Rous

  • Windows log has stopped working because of the automatic updates installed today

    I'm assuming that this patch may have caused the problem because it just came out this week.   "MS14-038 addresses a vulnerability in Windows Journal; the patch ends a reported hole in confidence in all the supported versions of Microsoft Windows, from Vista to Windows 8.1. »

    I tried all the possible solutions I found on the internet without success.  I need this software on a daily basis for my work. Any help would be greatly appreciated!

    I'm running Windows 7 on a HP Elitebook 2730P

    I have to keep the following updates, uninstalled so that the newspaper to work as it should:

    KB2971850

    KB2976627

    KB2975719

    Whenever a new security update is out, I have to check if it screws with newspaper.  This is ridiculous.  It is clear that they are progressively Journal to OneNote (which is a very bad idea that OneNote is a replacement of lower table).

  • Mouseless in New York... Microsoft Wireless Mobile mouse 3500 has stopped working on the Surface RT

    This mouse was working well, but no more. The error indicates the device is 'unknown '. Tried to download the driver, but would not be executed (called store but nothing relevant). We have a couple of these mice, all had worked and now... nada. I wonder if the change occurred after the installation of an update of the RT software? Thank you.

    Turns Microsoft store looked my device and found that the usb port was not. They replaced my RT surface

Maybe you are looking for

  • iTunes subscription game

    If I subscribe to iTunes game and the decline of the subscription after one year, I lose music upgrade?

  • am dat upgrade windows apoi dat sistem if iam acum nu may pot the restore key shimmb

    am dat upgrade windows apoi iam dat sistem restore iar cand imi dau upgraded AI same cod da sal schimb naked ca vreau EU is upgradeaza if nici numi apare pagina his pun cod alt imi arata fail celalalt cod cu toate ca numai a data of prima fost bun

  • problem z3 compact camera underwater

    I tried my new z3 compact under water and every time I put it under water camera stopped and it is lacking in the home screen. Why stop the camera?

  • Windows 7 message Boot error message

    Microsoft has recently made an update on my Windows 7. During the upgrade, Windows malicious software removed what she claimed it was a virus. That took place, I constantly get the message: "this file has no program associated with it for performing

  • Correct driver for HP Laser 2605DN for Windows 7.

    I made an update of the selection of driver installation and the pilot was found and appeared to install.  However, when you print a test page, the window displays print queue status and then and error.  No entries in the Windows event log.  In devic