Intel(r) WiFi Link 5100 AGN installed in a Studio 17/1745
I recently lost network connection using the-built in Intel(r) WiFi Link 5100 AGN. Stupidly, it happened while I was still under a contract of Service, but because of the holidays, I turned it off and the contract expired in mid-December. I have a Studio 17/1745, I disconnected the internal WI - fi card and use an N of D-Link USB and I now have a WI - fi connection. Should I buy a new internal WiFi card and if so than that.
Places to look to see if your connection is activated
What program anti-virus and firewall are you using? I see virus program lead to problems of connections.
Tags: Dell Products
the WiFi has been disabled by the Device Manager, and I can't activate it
When I get in the Device Manager, one! sign was shown next to Intel(r) WiFi Link 5100 AGN, and I click Properties, the device status displays the message below:
"This device cannot start. (Code 10)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
When I click on "Find solutions", it displays 'could not load driver software' and no solution appears
I tried the function "update driver" and still no idea to him.
not the product. My dv7 is VQ971PA #AB5. Model no. dv7-2124TX is
You have a few options in my opinion please try these steps can help you solve your problem.
(1) unplug the battery adaptor & then press on & press and hold the power button for laptop for 30 seconds then switch on and check if the wireless led lights.
(2) go to Device Manager then uninstall the drivers wireless network card and restart the device and check if the light is on.
(3) try to do a system restore to the date where unit was working fine.
(4) Please update the Bios driver & wireless from the HP website.
(5) click on start search type Recovery Manager, and then click on it once select Yes on user access control, and then select I need immediate help and then select driver and select request recovery driver wireless and install it and then restart the device.
(6) If you are comfortable with reinstalling the wireless card that will be on the rear panel of your device you can try this steps as well.
If you still have the same question so you must call HP tech support and get the replacement of the part.
I bought Toshiba Satellite L500-128 and have already 300N Sitecom Wireless Router
The new laptop has a wireless lan card with the 802-11 Draft-N support
I don't know the speed of my new laptop buth is continue about 48 / 54 Mbps
I have a second computer with a supported 802-11 Draft-N Wireless card and works very well with speed more than 136Mbps
I tried several things to change in the configuration of the card wireless buth without any results.
Does anyone have an idea? How to solve this problem?
Check if the wireless network adapter using the Draft N standard.
You can choose this in Device Manager-> properties-> Advanced tab WLan card
As far as I know that the WLan card is Intel 5100AGN.
Check if an update of the WLan driver would also help
I have Windows Vista, Office 2007, and when I download the update recommended above makes my Internet become very reliable. Some Web pages is not affected, but some will not work. There is no obvious reason why this is the case for all advice would be greatly appreciated.
Thank you very much
You tell us where you found the recommended update.
FYI for Windows updates:
Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.
You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.
But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.
You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:
'Remove an update'
When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again
"How to hide or show an update of Windows Vista"
Here's how to chanage update settings, if you think it is necessary to:
"Understanding Windows Update and Extras in Windows Vista and Windows 7.
Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system
See you soon.
I have the modem title in my laptop that I inherited from my sister. I got home and it does not connect. I ran a diagnostic and it says that there is a problem with the driver. I did the update and represented the diagnosis. Same thing is happening. I went to Device Manager and not the diagnosis, and he says: I use the highest driver so far and that the modem is working properly.
Help! A diagnosis says it does not work, it says it does. What should I do here? Any help would be appreciated!
Thanks for posting in Microsoft Community!
What is the exact error you receive when you try to connect?
You can uninstall and reinstall the drivers and check.
Updated a hardware driver that is not working properly
You can also contact the manufacturer for the latest drivers.
I have a strange problem:
I have two HP ProBook s 4710 here in front of me. The two "seems" to have the same hardware inside (I don't see any difference on the stickers in the back).
I have install both of them with the same USB with Windows 7N 64-bit.
After the installation is complete (no additional driver installed).
the first bluetooth ProBook has
the second bluetooth ProBook has NO!
I checked the BIOS, every two active a bluetooth settings on both.
WLAN works on both.
On the first s I can also install the bluetooth drivers latest, on the second, I can't. Always the message occurred ("no device was detected. Make sure that... »).
Device Manager indicates, the two ProBooks Intel WiFi - Link 5100 AGN, the first s also Bluetooth-device listed, the second of not.
What the hell is going on here?
It is very strange because the HP Wireless Assistant software is registered directly on the support page and driver 4710 under the solutions section.
If this is the case, try the latest HP Connection Manager software which does the same thing the software assistant wireless.
Here's the theory behind your dilemma (except radio BT died).
This laptop once had the connection manager (since the software assistant Wireless does not) installed, and you can use this software to individually disable bluetooth or devices rather than using the wireless button wireless.
I guess that for example, turn off the stereo bluetooth with the connection manager to save a small amount of battery power, which increases the time before having to recharge the battery. But you can still use the wireless.
The hardware button turns both off the coast.
The big problem is...
If none of these devices are turned off by the wireless assistant or the connection manager software and that you reinstall the operating system or to update or other, wireless or bluetooth devices do not appear in the Manager of devices as if they are dead or don't exist.
And what makes this more puzzled, is that if you check the BIOS, you will see that they are present and active!
The only way to make them work again, is to turn them on by using the Deputy Director or the wireless connection software.
This is why it is absolutely essential to ensure that these devices have been turned on before you reinstall the operating system.
For those people that upgrading to W10, none of these programs work on W10, so if the BT has been disabled, the user must return to W7, activate the bluetooth, uninstall the connection manager or the wireless assistant software, reboot, ensure that the device is always on and then upgrade to W10.
Here is the link to the software of the support page for your laptop connection manager...
If this doesn't work or the other, I suspect that the BT module does not work (all hardware failures).
I get the "dysfunctional" message that the WIFI link 5100 AGN has a driver problem... I am running Windows 7... Troubleshooting DIFFICULTY IT has failed. Could someone enlighten me also as to how it affects me? I didn't notice anything in particular up to now.
Thank you very, very much... I visited the two Intel and Dell... ran a diagnostic on Dell... then downloaded 'detector and installer for drivers' who came through good but later... much later said he finally was able to download this driver but can not install it.
I tried several ways to download the driver from the website, but nothing is done and finally did what I probably would have done FIRST... a system restore to before that happened... but I thought that I better try to "fix" or "Reinstall" the driver anyway then came to the Community Council.
Well, the final result is because the restaurant is back to before the problem, but I still don't know what happened to do in the first place.
I find that my Intel 5100 AGN wireless network card does not work as well as he used to. I tried everything... even the drivers are perfectly up-to-date. But I keep losing the connection to my wireless router, even if the strength of connection between 3 and 4 bars. I find that I rarely make me fall if I have 5 bars. But if it drops to 3, I get periodically fall any wireless network that I use.
I want to replace this card by something better, but of course compatible with the HP dv5 (my specific model is dv5t-1000). Any recommendations?"If you keep an open mind, life will give you more opportunities."
What I meant by my statement about you have the best of the cards available for your laptop is that, Yes, I'm sure that the Intel 5300 is an improvement on the 5100, but the problem is that you can not install the 5300 in your notebook.
The Intel 5300 is not supported (only the numbers of cards/coins listed in the service manual can be installed) and your laptop wouldn't start until you have removed the card.
You can try another card in the manual, if you wish.
However, you are limited to the:
4322 Broadcom 802.11a/b/g/n WLAN module
Broadcom BCM4312 802. 11 b / module g WLAN (not a N Wireless card)
I guess you can use an external USB adapter, but I would like to get one with an external antenna connected to him, because I would have to believe that installing wire of 3 antenna in your address must provide superior reception on a simple USB wireless adapter with an internal antenna as its single antenna.
The antennas go all the way to the top of your screen.
Tinker you with advanced network adapter settings? They can be found by clicking on the card in the Device Manager, click the Advanced tab. Take note of where the parameters are now so if something is buggy, you can change their return.
Here is a guide to the advanced settings that you have and the recommended settings for them.
KB 915597 Def 184.108.40.206 updated - immediate problem of connection to the network; Intel WiFi Link 5100 AGN is present, "working properly", but "there is no network to connect to."
My "update journal" indicates that this definition has been installed at 05:47 (Saturday 111/21), the same moment where pages failed to load and the small icon of net showed no link. (I had fortunately been web surfing until - filled bars.)
This is an update "cannot be uninstalled." I did a restore of the system to the previous Thursday, and then to the previous week, without change in condition. . I powered completely off and on again several times, without success.
There is a note on the update for http://go.microsoft.com/fwlink/?LinkId=52261 - who takes me to a page with a bunch of stuff on the installation of a BizTalk adapter. (snippet below included) This is way beyond my ability to understand... I DON'T know how to edit the registry, but I don't know what to change, if this ' even common sense.
The update could have messed with the IP addresses?
I tried net diagnostics ("no network to connect to"); I tried to add a new network - the 'check' the devices window just sits there...
(Yes, my other devices connected wireless - works perfectly.) The computer has not been moved from its site)
(This is a piece of the message I get from the url above)
"You can use the BizTalk for MSMQ adapter and adapter BizTalk Message Queuing on the same computer. However, given that these two adapters use the same port, you must add an IP address to your computer as BizTalk adapt for MSMQ can use. »
 I bought the Dell in August as 64-bit extensible and Dell sent me a Win7 disc...
 indeed, McAfee came with the machine as a trial version...
 I think I might start by reinstalling the Win7 update...
A1. The Dell computer came with Vista 64-bit SP1 edition? [Yes/No]
A2. Your current McAfee application is supported in Windows 7 64 bit? [Yes/No]
If the free trial version of McAfee is always installed, when the free trial period expire?
If you have purchased McAfee application, did you do before the expiration of the free trial period? [Yes/No]
You never downloaded & run a utility named McAfee Consumer Product Removal Tool? [Yes/No]
A3. Please do not confuse the upgrade your version of Windows with 'update your computer' (e.g. Windows Update), especially in these forums.
If you've upgraded to Win7 64-bit, you can't "start over by reinstalling the Win7 [upgrade]." If you want to reinstall Windows, you need to reinstall Vista SP1, and then reapply the upgrade to Win7.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Anyone know if it is possible to upgrade your Lenovo R500 Intel WiFi Link 5100 wifi to Intel Dual Band Wireless-AC 7260.
Reference to buy:
A reference that is inside the laptop: /
-L' a long.
Welcome to the forum!
You need a modded BIOS to be able to use this card in R500. Stock BIOS will not allow the machine start with him.
I have a W500 with Win 7 x 64. I have the Intel wifi link 5300 AGN wireless card and drivers Intel, 220.127.116.11
In devices, Advanced tab, Manager it shows these settings for 802.11n properties. But at the bottom of the list, the wireless Mode, it shows 802.11a/b/g. There is no mode N. Is that this card capable of the speeds Wireless N? Thank you for your help.
"N" is not a specific mode that you set on the wireless card, options must be various mixtures of A, B and G listed.
802. 11b and 802.11 G are both in the 2.4 Ghz range, where everything and his brother uses including microwave ovens, cordless phones, etc. It is therefore very noisy, but common. 802.11 G is the version high speed 802. 11B; If anything the frequency wireless 'channel' only supports 802. 11B, everything about this channel is limited to the 802. 11B.
A is in the range 5.0 Ghz and 802. 11A is the * ONLY * thing; It is also a much less common standard, you need wireless routers that support, etc. If you can use it, do.
802.11n is actually one 'upgrade' to others, allowing the channel bonding multiple and very wide channels, which increase a LOT of bandwidth.
But for example on both my T61p and W530 my "Wireless Mode" options are: a, b, g, b/g, a / g, a/b/g. I have another '802.11n Mode' option to enabled/disabled in the tab advanced on my wireless card.
I have a HP Pavilion dv7-1270us. My wireless card is an Intel WiFi Link 5100.
Running Windows Vista 64 bit, Ubuntu Linux, Linux Mint and Fedora Linux (various versions, all), the wireless works fine. My desktop computers to work with wireless cards to connect to the network work very well, and all computers (except mine) to connect to my home network very well; which means that it is not a problem with wireless networks, or with my network card. I try to manually connect to the network, but it can't find it. Diagnosis requires that the card is disabled, and that I should turn it on via the switch on my laptop running: fact.
During the installation of Windows 7 64 bit, I cannot see wireless networks (and therefore unable to connect). Re-formated and reinstalled again, check the wireless connectivity between each batch of Windows Update, but it has never worked.
I downloaded the latest drivers from Intel, via Microsoft Compatibility Center (version 15.2.0 driver).
There is no system restore option because he has never worked as a first step, except in all other OS, I got on the computer. Microsoft Compatibility says the map is compatible, then Device Manager shows no problems. The network adapter is active via switch on my laptop.
Happy that you guessed it sorted!
I have Inspiron 1525 + 8.1 Windows + Intel Wireless WiFi Link 4965AGN (Intel last driver for Windows 8). If I set the off mode N card wifi, wifi is more slow (54 Mbit/s), but stable. If I turn N (enable) mode, wifi is fast 144 Mbps, but becomes unstable - often (few minutes) disconnects, the disconnection of the card shows a lack of drivers, you cannot reconnect to the router, you must restart your computer. Another computer - Dell Studio with pre-installed map 5100 is stable under the N on my home network. Dell officially submitted the 4965AGN card is compatible for Inspiron 1525. Is it possible for stable operation in N mode?
I'm glad to hear that you were able to find a solution to your connection problem. Thanks for posting back.
HP Pavilion dv6928us
OS and information network:
- Wireless router: ASUS RT-N56U on the latest firmware 18.104.22.168.360
- OS: Windows 7 Professional 64-bit SP1
- Windows Firewall is disabled
Intel Wireless WiFi Link 4965AGN
Drivers updated to the latest version: 22.214.171.124
- Channel 802.11n for band 2.5 width 20 MHz only
- 802.11n mode
- Ad Hoc channel 802. 11B / 11 g
- Ad-Hoc mode of WMM QoS off
- FAT Channel intolerant with disabilities
- Mixed mode Protection CTS automatically
- Vagrant aggression 3. Medium
- Transmit power 5. Highest
- 6 wireless mode. 802.11a/b/g
Steps in trying to solve this problem:
- The option "allow the computer to turn off this device to save power" is also disabled.
- I have the power options set to High Performance.
- I installed inSSIDer and I'm the only broadcast network on the 5 GHz bandwitdth (so there is absolutely no interference whatsoever)
- I spent between the 2.4 GHz and 5 GHz and the same thing happens. See below
My laptop to find < 50 meters from my wireless router (no walls between the two) and I connected on 5 GHz bandwidth. I get random disconnects all along the day make a red X on the network icon in my taskbar. The only way to correct 'temporary', it's completely restart my computer.
On the other hand, my mother's laptop is in the other room, also connected to the 5 GHz range, ran into problems of ZERO at all.
What could be the problem?
If anyone else knows this problem, are the only two (solutions)
- "Allow the computer to turn off this device to save power" option checked
OR (if this does not work)
- 802.11n mode Disable
802.11n mode for Intel Wireless WiFi Link 4965AGN for operating system Windows 7 and 8 is buggy. Which causes intermittent wireless disconnection.
I have a Satellite P100-429 with a 3965abg to intel, I have a few router purchased months ago Netgear wnr834b n project, then think, it is high time, I upgraded my internal adapter.
I wanted to know if the Intel Wireless WiFi Link 4965AGN adapter would fit that is a right with the 3965 swap, as it says it's connection is Mini PCIe card * and I have no idea if it would fit?
Yes, she should go, because the W-LAN-mini-card slot is a PCI-Express, so you'll just have to swap the cards. But be careful with the antenna connections, if you bend them too so they break very quickly and then there is NO WAY back and you will pay for the exchange of
the whole cover, where are the antennas of screen.
Best is to contact a local service partner if they exchanged, you don t therefore the risk for the guarantee void if you do something 'not very good' on your machine. :)
Maybe you are looking for
I have "upgraded" to Windows 10 8.1 recently and have lost the ability to send mp3 and mp4, files stored on the computer for my smart TV. All attempts to cause an error on the PC and smart TV. Microsoft say it is because Toshiba do not have widows 10
Hello Just bought a new Tecra A11 computer laptop running WIN7 Pro. Then downloaded and installΘ_ * virtual XP Pro * _ but not happy with the results that a lot of things he can do my other dual boot 17 "computer laptop with Vista/XP Pro will do. Bac
Hi Sir, I want to ask how to divide an array of Boolean 1 d. for example, I want to put the first 32 bits in column 1, then the 2nd column to and so on... I just want to have a table 2D-32 bits-per-cell... Thank you
Or make us able to hide. I, personally, never used, above all on my Z1 small, Compact.
Hello I started playing with the gears and SQlLite today and I get an error when I try to insert values into a table with multiple columns. I have: var db = google.gears.factory.create('beta.database'); db.open('developerSet'); db.execute('create tab