Intel SSD 750 series

Similar Questions

• Intel SSD 530 series with HP ProBook4540s

  Sorry for the translation.

  After installing the 530 120 portable GB Intel SSD and install windows 7 x 64. the system starts properly. but when not choose "shut down" and select "reboot" then the computer does not see hard drive.
  After a stop, windows loaded correctly.
  After the next reboot problem repeats.
  Help

  I informed the Intel the incompatibility problem.
  They updated the version of the software and the firmware for SSDS, which solved the problem with my 4540 s HP's Probook.
  Link to download the firmware updated from the Intel Download Center: https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=18455

• Intel SSD 310 Series 80 GB (Mini PCIe SATA card)

  Together, Hy

  Last week I compressed orderd the X 201 with the following data:

  CPU: Intel Core i5 - 560 M

  HARD drive: 500 GB (7200 RPM)

  RAM: 1x4Go (PC3-8500 DDR3 SDRAM 1067 MHz)

  WWAN: not built in but expandable

  My Question is now, can I build instead in a SSD SATA Mini PCIe card instead the WWAN Module and start the system on this SSD? Having someone has tried it before? Have someone tried another PCIe Mini Card SSD (in the X 201 Tablet) and can tell me something about this.

  I would like to take advantage of this SSD: (have some expirience with that SSD?)

  http://www.StorageReview.com/intel_ssd_310_series_80gb_review

  Really thank you all

  Good night from Austria,

  Robert

  your X201T slots are mPCIe, not mSATA.   they are the same form factor, they are electrically routed differently.   Unfortunately the intel 310 card does not work in your system.

• How can I determine which Intel SSD is compatible with my MacBook PRo mid-2012?

  I have a MacBook Pro 13 inch Mid 2012 (not retina) and I need to upgrade my hard drive to an SSD. I've seen several like Intel s 540 and 750 series and a Crucial MX SSD. However, I am trying to identify the one which would be compatible and the best alternative for my upgrade. I appreciate the help. Thank you.

  SSD:

  MX200 essential 500 GB SATA 6 GB/s 2.5 "

  Intel SSD 540 s series 480GB 2.5 "SATA 6 Gb/s, 16nm, TLC

  Intel SSD 750 series (400 GB 1/2 height PCle 3.0, 20nm, MLC)

  Your Mac has a SATA interface, so the PCIe model is not compatible, I would choose most of the three.

• clean install of win 7 on intel ssd nvme 750

  I am trying to build a new processor and use a motherboard with bios update appropriate for nvme (ASUS Sabertooth) and a version of nvme 750 Intel SSD. I'll do a clean install on win7 system and do not know with certainty how (will install process, download the appropriate drivers) to get the necessary drivers. Just to be clear, I ask the correct question, for it will be a slot PCLe install. There may be other issues that I'm not aware of if I appreciate all entries

  Thanks in advance for your help

  On Sunday, July 12, 2015 18:32:52 + 0000, DANQUECA wrote:

  I am trying to build a new processor

  A word on terminology - an important point. You're not building
  a new processor. It is not possible. What you build is a new
  computer.

  "CPU" means "Central processing unit". In modern furniture
  computers, the CPU is a relatively small chip, one
  integrated circuit. It is on the motherboard inside the computer
  case. It is not the case itself, or the entire computer, which
  includes the case and what it contains.

  I don't know how incorrect practice began the appeal of the whole
  the "processor" of the computer, but here's my guess: when you buy a computer, you
  normally get the deal and what is in it, with a monitor,
  keyboard, mouse and perhaps a printer. All of these devices
  connect to the ports on the case. Because everything connects to the case,
  the case is "Central" to everything, and the term "Central."
  Processing unit"is sometimes badly understood and poorly applied to it.

  Yes, in this case, I understand what you mean even if you used
  the bad word. But depending on the situation, using the word
  wrong in the future, especially if you have questions, may
  confuse those who read your message and you get the wrong information.
  This is why it is important that you understand what is a CPU.

  and use a motherboard (ASUS Sabertooth) with suitable for nvme updated bios and a version of nvme 750 Intel SSD. I'll do a clean install on win7 system and do not know with certainty how (will install process, download the appropriate drivers) to get the necessary drivers.

  You should get the drivers on the web sites of the material
  Reference of the manufacturer - in this case, ASUS.

• Tecra R950 Intel SSD 520 and SSD set password = F4 BSOD after reactivation

  Hello
  follwing problem:
  Tecra R950 with Intel SSD and HDD/SSD series 520 passes together = always F4 BSOD after activation of the standby mode.
  OK with no password set.
  OK with Hibernate.
  Same problem with iastor and msahci driver.

  Any ideas? Think it's a problem with the bios. He goes down the ssd when wakeup, same cannot write a dump of memory (error 0xc0000010), the necessary cold start-up.
  Steve

  Hello

  Replace the SSD drive?
  As far as I know a lot of the Tecra R950 was equipped with a 500 GB HARD drive.

  I could be linked to the SSD drive

• Black 700 & Intel SSD 1 TB

  Hello

  can I use this double-sided m.2 ssd? SSDSCKKW010X6X1 INTEL SSD 540 s series

  Anyone have experiences? Anyone know an alternative for a 1 TB SSD?

  I now 256Go and her pups.

  Thank you and best regards

  Hi, I have build in the X 400 1 TB. So yes, its possible.

  In any case, the manual is useless because the Interior is different - fortunally easier. It just open, remove the cables to display, modify SSDS, connect the cables in display, close, ready.

  BUT: there is a big thick sticker everywhere in all other rooms. I have not tried to remove the battery. I just (accidentally) removed a small part to realize that this is not a good idea and realize that the layout is different.

  So far, everything works fine. If I have the problem, I'll tell you.

• 5.5 install on Intel SSD m.2

  I have a new RD650 ThinkServer updated to the current firmware, etc.

  When I try to install 5.5 fomr CD for the m2 120GB SSD, it hangs at 9%

  I have re-tried this installation still failed

  and then again with a brand new identical Intel SSD (suspecting it is the SSD)

  I then tried installation from the CD on a USB key and that has worked well

  How can I find out what it is suspended on - there was no error message

  Steve

  RESOLVED:

  I tried a second card Intel 540 m2 - no luck

  I then installed a Samsung 850 EVO m2

  Installed everything fine

  So it must be something to do with the 540 Intel series I have previously (only 2 months) ago used a card Intel 535 m2 and it was fine

  Hope this helps someone else out there

  Steve

• Intel i5 750 CPU supports FT?

  Hi all

  The Intel i5 750 processor is not explicitly mentioned in "processors and operating systems that support VMware Fault Tolerance"

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1008027

  I would like to know if it can be classified as 'Intel Xeon based on categories of Microarchitecture Core i7'?

  If not, I'm just wondering why the i5 (Clarkdale) is included and the i5 (Lynnfield) is excluded.

  In addition, one can explain the difference between "any series processor here may be used" and "each series of processor must be used separately" under the heading "Categories of Microarchitecture Core i7 '? Then a form of processor Nehalem/Lynnfield FT with Westmere/Clarkdale processor?

  Kind regards

  Terui

  Processor Intel i5 750 is not on the HCL for ESX, so it is also not supported with FT.

  The statement "each series of processor must be used separately" means that there is no interoperability between the processors on the list. In other words, you cannot use a 36xx with a 56xx, you can have pairs of feet with processors of same exact for this game. We hope to lift this restriction in the future.

  Thank you

  Karyn

  From: communities emailer [email protected]<>[email protected]>

  Reply-To: communities emailer [email protected]<>[email protected]>

  Date: Tuesday, January 4, 2011 19:39:17-0800

  To: Karyn Ritter [email protected]<>[email protected]>

  Topic: availability: HA & FT new message: "Intel i5 750 CPU supports FT?

  Http://communities.vmware.com/index.jspaVMware communities >

  Intel i5 750 CPU supports FT?

  created by teruiryuhttp://communities.vmware.com/people/teruiryu> availability: HA & FT - discovers the full discussion onhttp://communities.vmware.com/message/1673450#1673450

• Qosmio G30 and intel SSD - Windows 7

  Hi, I'm new to the forum

  I have a Qosmio G30 with Windows 7 32 bit - model G30 140 31F
  I bought an SSD intel 160 GB because of the promissed 250 MB/sg reading speed, because I need for video editing.
  I tried in Win Xp and now Windows 7 and it gets up to 120 MB/Sg

  I guess it s because of the drivers but I instal the drivers of storage can´t intel matrix any version of it. I tried a lot of them and with the compatibility mode too. It gives me an error saying I have not the minimum requirement.

  I have 4 GB of RAM and 2.0 Gzs centrino duo.
  I have install intel ssd toolbox and it does not recognize the intel SSD drive as a drive intel to improve the speed and other things.

  Please help me to get my speed in the car because it has to be and to have the TRIM option enable in order to have the life of my unit any longer.
  I also have the latest firmware in the drive.

  Thank you in advance.

  DANI

  PD: It coul be, perhaps, if our computer is a sata 150 controller in place a 300 sata controller? I don't know if the control is one of them in any case.

  Post edited by: Gazpachete

  Hi Gazpachete,

  I put t know how you managed now installing Windows, but Qosmio G30 is equipped with a SATA150 interface... This means that you will never get the 250 MB/s read speed of the HARD drive. You will get a maximum speed of 150 MB/s theoretically, but in most cases it of also a little slower.

  How did you check the current speed?
  But 120 MB/s is a good speed. You should be satisfied and it s faster than each computer portable HARD drive. ;)

• Cannot set the password for hard drive on the W530 with Intel SSD 520

  Hello

  I have a w530 with an Intel SSD 520 in primary hard drive Bay. Whenever I try to set a password for the primary hard drive, it doesn't stick. If I chose master + user or simply user, I will enter the password, it will take the passwords without producing an error and then just dump back me to the screen of passwords while leaving the disabled hard drive password.

  BIOS is on the latest version for the w530 and SSD, the machine seems fairly normally operate differently.

  Does anyone have ideas how I can activate the password? Thank you!

  Hi, ctenorman

  I did some research and came across this thread of Intel. There are a few people in the thread who were able to set the password on this particular drive. It seems that changing the BIOS "SATA" compatibility mode, set the password, restart, and then change it to "AHCI" worked for some, but not all customers with this player.

  Good luck and let me know how it goes

  Adam

• Intel SSD Toolbox 3.01

  A new Intel SSD Toolbox has been posted on the Intel Web site. The program will check and provide for new firmware updates, show the current state of the SSD and the remaining time.

  Thank you!

  The link is:

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  I also found that there is a new version of the RST on thus:

  http://www.Intel.com/p/en_US/support/detect

• Need driver for VGA controller Intel GMA 3600 Series Windows XP Operating system

  Original title: Driver needed!

  How can I get a driver for my VGA (Intel GMA 3600 series) controller for windows XP Home SP3? The device ID is

  PCI\VEN_8086 & DEV_0BE1 & SUBSYS_C629144D & REV_09\3 & 11583659 & 0 & 10.
  My computer is a samsung netbook. Model N102SP

  Hello

  Sure enough. I even downloaded and extract the Windows 7 drivers to see if there is evidence of support for XP, but it was not.

  You can always try to install the Windows 7 drivers to see what is happening. But I expect that the installation routine will check for a valid operating system.

  If you do not experience, first define a point of restoration in the event of adverse...

  http://support.Microsoft.com/kb/948247

  .. then you can come back if necessary...

  http://support.Microsoft.com/kb/306084

  Tricky

• "800705B 3" error message on the update Intell-display Mobile Intel (R) 4 Series Express Chipset Family

  "800705B 3" error message on the update Intell-display Mobile Intel (R) 4 Series Express Chipset Family CAN YOU HELP ME?

  Windows Vista

  Hi, Terry,

  What version of Windows are you using?

  Open the Device Manager

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to display adapters

  Right-click on the chipset driver, then select Properties

  Select the driver tab

  Select Restore

  If the rollback option is dimmed, select uninstall

  Back to zero computer and Windows will reinstall driver

  Go here and use the update utility driver Intel

  https://Downloadcenter.Intel.com/default.aspx

• W520 and Intel SSD 520 external casing replacement?

  I decided to upgrade my W520 the Intel SSD 320 to 520 SSD Intel.  I tried the 520 in an enclosed and theW520 does not recognize the drive.  I am trying to determine if the problem is the controller in the external case Thermaltake BlacX or was it simply the problem of having the drive in an external enclosure? (In other words, it would work in a different case).  I got an OCZ Vertex 3 that would work not in external enclosures, so I'm inclined to think this is the Forum as being both the Vertex 3 and Intel 520 uses SandForce controllers.

  Suport of Lenovo, I called and they told me that the only way I can copy the disc's to buy their Ultrabay III of A 0, 65623 adapter and copy the disks inside the machine.  I use older software of Casper and I don't think he would have Renesas USB 3 drivers, if I boot from a CD and trying to copy my old hard drive backup.

  Obviously people do that.  And, if the Ultrabay III adapters are not available at this time, they must do without them.

  How can I copy my data from the old drive to the new drive?

  Thank you!