Intel Turbo Memory Driver works only on windows XP

Similar Questions

• Touchscreen driver works only under Windows 8

  Install Windows 8 on HP Touchsmart 520 is really a nightmare. Usually, the display driver installation procedure and Voltron Touchscreen product error 9998 drivers. Oddly, I managed to somehow work around this by using a different display driver (some beta-version of Intel), but it was buggy. Since the reinstallation of Win 8 I can't to install more touch screen driver. Given that the Touchsmart series sells on its touchscreen capabilities and given the fact that HP relies on the Microsoft OS is not only slightly irritating that HP has so far not been able to provide drivers of devices that work well with Win 8 Release Preview. What solution do you offer me? Wait? Back to Win 7?

  The pilot (Nextwindow Voltron Touchscreen) updates automatically after the installation of Win 8 RTM when you only run Windows Update routine. At least in my case it did, and it works fine.

  HP Touchsmart 520, win 8 RTM x 64 Pro (Volume, active key by the KMS server; in the case that sounds Chinese to you: ask Uncle Google; this German page has all the information you need: http://www.boerse.bz/hard-software/microsoft/windows-8/1168581-windows-8-rtm-final-build-9200-informationen-und-diskussion.html).

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• Pavilion 500-090 USB driver works only with windows 7

  Hi, I lowered my pavilion 500-090 of Windows 8 for Windows 7 and impossible to find a suitable driver for the USB controller. Does anyone know which driver will work?

  Hello:

  Here is the link for the usb driver you need and you can use all other drivers of the model above for your motherboard as well.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-112308-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5197679 & sw_lang =

• DeskJet F4180: F4180 driver works only with Windows 10

  Printer prints all bad, except the dark colors. Turns red magenta, green is dark blue etc.

  Printer worked fine with win xp.

  Test page prints perfectly without error

  Using the prints to photocopy an exact color copy - it's just data coming directly from the computer which is incorrect, so the work of does'nt driver properly with win 10. I checked that I have the latest version of the driver 6.1.7600.16385.

  I have noted this problem has already been spotted upward - when a new driver is available?

  or can anyone suggest a work around.

  Printer I tried with my laptop win10 and the fault has been the same.

  Printer I tried with my old desktop winxp and the rift was healed - perfect impression of a jpeg file.

  Reconnected printer back on my desk win10 and printed on the same jpeg file and printing was perfect!

  Have you tried a few other files that I had problems with and prints are very well - can only be assumed that the problem was down to the usb connector.

  Thanks for the help

  Concerning

• Validy sensor driver works only under Windows 7 Ultimate 32 bit

  I recently installed Windows 7 Ultimate 32 bit on my laptop. I also installed prints software digital persona Digita and other drivers and software. No error message appears. Just a window comes up with a blue bar showing that it is installed. That's all. I can also see it as installed in the control panel. But nothing more happens. The fingerprint reader detects any fingerprints. What can be the reason of this problem and how can I solve this problem?

  Hi John,.

  What is the brand and model of the computer?

  Check if the scanner is working properly in Device Manager.

  To do this, follow these steps:

  a. on the desktop, press the Windows key + R and type devmgmt.msc and press enter to open the Device Manager.

  b. Expand human interface device and right click on the driver.

  c. select Properties , and then check to see if the device works properly under Device Status.

  Is there a yellow triangle with an exclamation mark inside, then it indicates that there are some problems with it.

  I suggest you to follow these steps to update the driver to scan finger print and check.

  a. press the Windows key + R and type devmgmt.msc and press enter.

  b. search for Devices of Interface and expand it.

  c. make a right click on the fingerprint scanner driver and Update driver software.

  Let us know if you have any additional questions.

• USB 2.0 Slim Portable optical drive works only with Windows 8

  Hello

  I recently bought an external optical drive (USB slim portable optical drive;) DVD + RW/BLU-RAY disc). When I plugged in my lenovo with windows 8. the computer does not even recognize any device connected to it. The optical drive does even turn on. I don't know if it's a problem with the player or what he is.
  I would apreciate for this assistance.

  Hello

  It is possible that the drive is faulty, but there may be a setting of conservation of power on your laptop, originally a problem as well...

  If you go to Power Options... 'Change Plan settings' on the right in blue text... then 'Change advanced power' also in the blue text, you will get a window where you can change the default power settings.

  You can temporarily disable or modify everything related to your USB...

  You can also go to Device Manager... 'Bus USB controllers' and see if you can determine what Hub or your disk controller is attached to and temporarily disable power save...

  Maybe it's that your computer does simply not provide enough power to the drive...

  Can you pass the cables to different ports to see if that helps?

  USB 3.0 ports supply more power, is that you have a...

  You have all the gadgets AC adapter that power via a USB connector, you can try?

  You could try a friends computer or something for a simple test...

  When USB powered external drives first came out, there were many problems with insufficient availability. Even after the use of two Sockets USB problem remained to a lesser extent...

  USB 3.0 has a higher power to try to resolve many of these issues.

• Re: Can I install Intel Turbo Memory on Satellite L40?

  Hello!

  Would it not possible to install the latest Intel Turbo Memory on Satellite L40 with chipset 965 series?
  This would negate the pre-installed Intel matrix storage control driver?

  Is this something with Windows readyboost and what benefits will I have to install this software.
  I think that when I bought this laptop there is no preinstalled software from Intel Trubo memory.

  Thank you!

  Hello

  What L40 do you have exactly? I asked it because the L40 would need some additional feutures in support of the Intel Turbo Memory.

  _The Intel Turbo Memory supports the following Intel chipsets: _
  Mobile Intel® 4 Series Express Chipset family
  Chipsets Intel® Series 4
  Intel® 3 series Express Chipset family
  Intel® Mobile GM965 Express Chipset
  Intel Mobile PM965 Express Chipset

  _The chispet must use one of the following controllers: _
  Intel® ICH10R Serial ATA AHCI Controller Hub
  Intel® ICH9M/ICH9M-E Serial ATA AHCI Controller Hub
  Intel® 82801IR Serial ATA AHCI controller hub (ICH9R)
  Intel® 82801IR Serial ATA RAID controller hub (ICH9R)
  Intel® Serial ATA AHCI controller 82801HBM (ICH8M)
  Intel® Serial ATA AHCI controller 82801HEM (ICH8M-E)

  You should first check to see if your hardware would be supports the Intel Turbo Memory feature.

  What OS you have installed on your Satellite L40?
  Some high-end notebooks have Intel Turbo Memory installed, which is designed to increase the performance for the Microsoft Vista operating system.
  If this Intel Turbo Memory feature is ONLY available using the Vista!

  By the way; If you want to know what benefits the Intel Turbo Memory offers please check this Intel product page:
  http://www.Intel.com/design/Flash/NAND/TurboMemory/316979.PDF

• Qosmio G40 - Intel Turbo Memory issue on Windows 7

  The Intel Turbo Memory does not work in my Qosmio G40 Windows 7. I tried different ways to install the drivers but only the work of the Intel Matrix Storage Console.

  If I try to install the full Pakage Robson, the material remains marked as a problem in the Device Manager and the computer crashes every time he goes into mode 'sleep'.

  Is there a way around this, or should I disable this feature (which was working under Vista before)? thanx

  Hello

  This feature isn t so important because he doesn't make a strong performance gain, but in your case I would try to update the BIOS. Maybe it will work or let's say that the computer goes into mode 'sleep' correctly again. The latest version, you can download the Toshiba site.

  What Intel driver, you have exactly? Have you tried the Toshiba site?

• Monitoring facility for disabling for Intel Turbo Memory windows XP tool

  Hello

  Readme.txt didt has no information to install "Disabling tool for Intel Turbo Memory" surveillance.

  Anyone know what method can be used to install this driver.

  I have already tested it

  C:\Windows\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 "the inf file name.

  OK, found a solution by myself

  microsoft devcon.exe help you install the INF drivers.

  http://support.Microsoft.com/default.aspx?scid=http: //support.microsoft.com:80/support/kb/articles/q311/2/72.asp&NoWebContent=1

  Like this-> devcon.exe update c:\SmartCard_Reader_Driver\LENOVORD. INF 'USB\VID_17EF & PID_1003'

• Intel Turbo Memory - useful or not?

  Hello.

  can I install this: E20680-002 Intel Turbo Memory Module 4 GB on my Pavilion DV7-1020ea?

  It would make a difference? I use Windows 7-64 bit.

  I already upgraded one of the HDD with a SSD Corsair with 535mbs/550mbs-reading-writing.

  Robik wrote:

  Hello.

  can I install this: E20680-002 Intel Turbo Memory Module 4 GB on my Pavilion DV7-1020ea?

  It would make a difference? I use Windows 7-64 bit.

  I already upgraded one of the HDD with a SSD Corsair with 535mbs/550mbs-reading-writing.

  Hello

  I don't think that you need.

  http://www.Intel.com/CD/channel/reseller/APAC/Eng/products/mobile/mprod/turbo_memory/396715.htm

  You have a correct SSD drive, so no need for that. It seems to me as a predecessor of the current mSATA cache on the laptop Dv6/7 Envy and TouchSmart Intel. It speeds up the laptop, but in case that the laptop has a pure SSD the mSATA or Turbo Memory is not necessary because the system is even faster. BTW: Corsair will work max up to 300Mbps because the chipset supports only SATA II connection.

• Impossible to activate ReadyDrive (Intel Turbo Memory)-

  Hello!

  I have problem with ReadyDrive - I can't allow it. In the Console memory Intel Turbo I can fill the box, but after restarting, nothing happens and ReadyDrive is always disabled. I tried different ways to work around this problem - decommissioning of the BIOS, use of older drivers, reinstalling the system. With no luck. ReadyBoost works. SATA is of course in AHCI mode.

  The other problem is that when you start (after the bios before loading Vista) system stop for about 30-45 sec and wait... wait for nothing.

  The problem started - a few months ago before that everything worked well. So if a system fall I see some sing as «Recovery after blabla...» "- it's Intel Turbo Memory information, recovers the system flash memory. Now he's gone.

  My ThinkPad specification: T61p with Hitachi 7 k 320 drive, Intel Turbo Memory 1 GB.

  Best regards
  Dawid

  PS Sorry for my bad English!

  OK, not a service solution. They said, that the card's fault and they can exchange it (out of stock?), so I'll have the money back guarantee. I think that all people with the same problem have broken.

  Best regards

  Dawid

• INTEL Turbo Memory Module 1 GB (Robson Modul) in a Satellite A200?

  Hello

  a Satellite A200 - 14 d a slot PCI Express free for INTEL Turbo Memory (Robson Modul) Modul?

  Thank you

  As much as I know the use of these memories is not possible. Satellite A200 has slots for standard RAM modules only.

• Tecra R10 you need Intel Turbo Memory?

  Hello
  I intend to change my Vista to XP, and I see that XP does not support Intel turbo memory. But I see no where is the laptop as Intel Turbo memory.

  So my question is is it in Tecra R10 - 10s Intel Turbo Memory

  Thank you

  Akuma thanks for this information. To be honest it was not known to me ;)
  See you soon

• RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm does not work with your new browser. It is very fustrating and works only with Windows Explorer. I need to reinstall the old FIREFOX program?

  RoboForm has already released a version with support for the latest version of Firefox. See http://www.roboform.com/support/news. Try upgrading to the latest version of Roboform.