Intel Wifi 5100 found on Satellite P300-1DB

Similar Questions

• Tecra A10 with Intel WiFi 5100 running Vista 32 bit fails to connect WiFi

  Hello

  a whole new Tecra A10 with buildin Intel 5100 WiFi fails to connect to the Wlan router, using the pre-installled Vista Business 32-bit. Vista has always said: wrong password.

  Yes, Wifi hardware is enabled, of course. And Tecra WiFi OK MAC is stored in the config of the router. Also the WiFi settings were correct (wpa2-psk aes), corresponding to the Wlan router. Password WPA2 is 13 characters. Connect all the other machines with a Wlan successfully turns a working Wlan configuration and use of the correct password.

  I installed the latest driver on the Toshiba site - without success. I also installed the version of the driver from the Intel site will, too--without success. Doesn't matter what tool I used to connect, Vista itself, or the specific tool of Toshiba (Radar), choice to get an encrypted Wlan connection.

  WPA2 and WPA or WEP can be used. I can't get a Wlan connection when encryption is totally * disabled *! Currently, I use a * clear * Wlan to use this Tecra A10 in the network. Real gross and no solution for more than a few days.

  All other devices in the same network can connect the router Wlan with WPA2-PSK and WEP, no problem. Only the A10 / WiFi 5100 fails.

  Searching the Web I found really many reports all issue of WiFi with a WiFi 5100 devices, so it seems to be a generic material or / and driver issue.

  How can I correct this Wifi 5100 connect problem and use encryption WPA2-psk on Tecra A10 and WiFi 5100 with Vista? If this is not possible, I have to return this laptop and get another model with a working Wifi / Wlan Hardware.

  Thank you.
  -Thomas

  Hello Thomas

  Have you tried to connect your laptop to another router by friends or elsewhere?
  It is really strange that you can use any of the WIFI ciphers available.
  Have you tried to reboot your router?

  I have Satellite A300-1LI with the same card, WLAN, preinstalled with Toshiba recovery WXP image and I use it sometimes linked to the WLAN with WEP encryption.
  Have you tried to contact Toshiba or your local dealer for advice?

• card technology V570 intel wifi not found

  I re-installed Win 7 OS and installed all the drivers except for the WIFI, I have 3 files of pilot WIDI, WIMAX, WIFI... I don't know what to do all 3 of them, first of all I would like to know that.

  2ndly I want to install on this wireless configuration, someone please help me do what I have understanding of problems on how to do... I tried all where established WIDI says that the device is not compatible, while other mistakes are ADAPTER NOT FOUND.

  I don't know how the boot priority is linked wirelessly, but finally finally... I set the priority to boot from the CD by going F12 at restart and put him on top... and now wireless is enabled... I feel that I have won a battle against lenovo...

  Krasto iskusstva, thanks for the help Man... this thing... worked as I changed the priority to boot to a CD to HDD... but after the reboot, the problem continues to persist... I just went to F12 and just opened and closed... and sound now generally works well, however I can not continue to do this every time I restart my laptop...

  I highly recommended it is extent of Lenovo team and should have an end solution...

• Satellite P300 - 133 WiFi card - upgrade to N

  Hello
  My laptop Satellite P300-133 was delivered with a WiFi Intel PRO/Wireless 3945ABG card.
  It has facilitated access to the PC card.

  I have acquired a new worthy of the N standard wireless router.
  It works very well with existing under the standard G laptop card.
  New Satellite P300 models are standard h.

  I would like to know if there is a map for the Satellite P300-133 that I can use to replace the original card for laptop with a corresponding also to the N standard.

  Thank you

  Hello

  It is has some network cards wireless standard 802.11 Draft N but also as far as I know the project WLan N needs 3-wire antenna.

  The other WLan standards such as 802.11 A, B or G need 2 antenna son and I imagine that the laptop has been delivered with 2 wired antenna and therefore the Draft N will not work in your notebook.

  However, you can try some external wireless network cards that would favour the Draft N

  Welcome them

• Satellite Pro L510 - cannot install and start Intel Link 5100

  Hello

  I have a Satellite Pro L510 (P / N:PSLFML - 002004). Recently, I upgraded my Intel WIFI Link 5100 (my original WLAN is Realtek RTL8191SE). I tried Windows 7 32-bit and 64-bit with intel driver, version 13.4 and 13.5, non of them worked so far. I always get this error 'this device cannot start' in Device Manager

  Can someone help me with this problem please?

  Duy

  Hello

  May I ask why you switched the WLAN card? Something was wrong with your old WLAN or why you did that?

  The WLAN feature was working before the upgrade?

  I can say with certainty why you get this message error, but to me it seems that the WLAN card is not activated, you permit wireless network adapter using the FN + F8 key combination?
  ?

• Satellite P300-150: slow processor during the test with the id tool intel

  Hello

  I just bought a Satellite P300-150 and it was working well in general... play lotro with few problems, but not in dx10 cos it chuggs as hell.

  I noticed he had a genuine problem of warhead of the crisis in the recommended settings, but thought it was just cos he couldn't do.

  But I downloaded the untilty of Intel processor id and he gave the following results... as you can see on the bottom 4 lines the processor is very upset with the expected results for the frequency and buses (fewer than half actually).

  Intel recommends if there is a huge gap, I need to contact the manufacturer... which brought me here.
  Any advice before contacting tech support directly?
  Just maybe I can play warhead after all! : o).

  Utility to identify processors Intel (r)
  Version: 3.9.20080910
  Timestamp: 2008-10-03 22:27:03
  Number of processors in system: 1
  Current processor: #1
  Cores per processor: 2
  Disabled cores per processor: 0
  Processor name: Intel (r) Core (TM) 2 Duo CPU T8300 @ 2.40 GHz
  Type: 0
  Family: 6
  Model: 17
  Step by step: 6
  Review: 60 ° C
  CPUID level: has
  L1 Instruction Cache: 2 x 32 KB
  L1 Data Cache: 2 x 32 KB
  L2 Cache: 3 MB
  Packing: FC-PGA/BGA
  EIST: Yes
  MMX (TM): Yes
  SSE: Yes
  SSE2: Yes
  SSE3: Yes
  SSE4: Yes
  Enhanced Halt State: No.
  Execute Disable Bit: Yes
  Hyper-Threading technology: No.
  Architecture Intel 64: Yes
  Virtualization Intel (r) technology: Yes
  Expected processor frequency: 2.40 GHz
  Frequency of the processor reported: 1.07 GHz
  The expected system Bus frequency: 800 MHz
  The reported system Bus frequency: 357 MHz

  Hello

  Satellite P300-150 was equipped with the Intel Core 2 Penryn T8300 processor.
  This processor supports Enhanced Intel SpeedStep technology.

  Enhanced Intel SpeedStep technology allows the system to dynamically adjust the tension and the processor core frequency. This means that the CPU doesn't always work with maximum performance, but only if it of needed. This helps minimize the heat dissipation and allows to secure the battery energy!

  The CPU seems to be slow check with the Intel ID tool ;)

  For more information on Intel Enhanced Intel SpeedStep Technology check out these articles from Intel:
  http://www.Intel.com/CD/channel/reseller/ASMO-na/Eng/203838.htm

  http://www.Intel.com/support/processors/sb/CS-028855.htm

  Welcome them

• Satellite P300 is not connecting to WiFi

  Hello.

  I registered just now.
  I am looking for counsel for my connection my laptop which is not fuctioning or receive any wireless network.

  I bought this unit 3 weeks with the model of Satellite P300.
  Last night, he couldn't connect to my WiFi o2.
  Contacted O2 customer service, they were amazing and useful that they told me that it is most likely my wireless laptop is defective.

  I'm not really a wizard in this matter but before this unit received a variety of wireless connection secure.
  So now it does not work more.

  Can someone give me a recommendation on this issue.
  Thank you.

  I will try to do a BIOS and driver update.
  These updates, you can find the Toshiba Europe site:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Do you have the yellow marks in Device Manager?
  The laptop recognises a WLAN?

• Satellite P300 - after Intel WLAN driver update cannot connect to the WLAN N

  After 4 months I have updated the driver for the WLAN. After installing the driver I m unable to connect to a network of N. recovery software but is not be able to connect to the network.
  I have already installed the Intel driver but nothing help.
  Are there some people who can help me solve this problem?

  I have a Satellite P300.

  Hello

  Firstly, it must ensure that your wireless network card and your WLan router would support the Draft N.

  Second, you should check if the project has been selected in the WLan card properties.
  This, to check the Device Manager-> properties-> Advanced tab WLan card

  Check it out

• Satellite L500-1WR - cannot use new Intel WiFi card

  Hello

  Purchase card Intel WiFi Link 1000 (112BNHMW) Mini PCI-E. Installed in place of the stock of Realtek. Windows has found the new device, I downloaded and installed the latest Intel driver (Windows 7 64-bit). But the Wi - Fi card does not see any wifi network (G ~ 12 networks and N = 1 networks around me), trying to troubleshoot-made the question by troubleshooting of Windows GET the message "on this computer's wireless capability is turned off" However the WIFI is enabled in the BIOS and the orange LED is lighting. I downloaded the utility of wireless control of intel, the Swith WiFI possible software option is just disabled (grayed out in the menu)

  Laptop is locked for use only Realtek RTL8187SE? Or Intel does not support some "physical interfaces" to turn it on?
  Is there a list of WiFI N Mini PCI-E adapters compatible with this laptop?

  Thank you

  Hey,.

  The question is why you have installed another wireless network card? In my opinion, it is not logical because the preinstalled Realtek card is tested with your laptop and works correctly. In addition there is no difference between the wireless network cards

  If the wireless network adapter is enabled, press the FN + F8 key combination. This can enable/disable the WLAN functionality.

• WiFi with the Satellite P300-135 problem

  Hello

  Here's my problem:

  I removed VISTA and installed XP on my Satellite P300 - 135 (PSPC4E). After that, I downloaded all the drivers for XP and installed. But the wireless card is not recognised and in Device Manager there are two features of problem:
  -Device on high definition audio bus modem and
  -Network controller.

  I remember well the type of my wireless card and tried first with Realtek, but it did not work. Then I tried with Intel and Atheros drivers, but they do not have too much work.

  I hope someone can help me, because I don't want to go back to VISTA.

  Hello

  According to the specifications of the laptop Satellite P300-135 has Intel 11 a/b/g (13ch) - Golan WLAN card.
  Have you tried installing WXP driver for WIRELESS Intel network card?

• Refresh your wifi Lenovo R500 Intel WiFi Link 5100 in Intel Dual Band Wireless-AC 7260

  Hello

  Anyone know if it is possible to upgrade your Lenovo R500 Intel WiFi Link 5100 wifi to Intel Dual Band Wireless-AC 7260.

  Reference to buy:

  http://www.Intel.com/content/www/us/en/wireless-products/dual-band-wireless-AC-7260-Bluetooth.html

  A reference that is inside the laptop: /

  -L' a long.

  http://www.Intel.com/content/www/us/en/wireless-products/WiFi-link-5100-brief.html

  Welcome to the forum!

  You need a modded BIOS to be able to use this card in R500. Stock BIOS will not allow the machine start with him.

• HP ProBook s 4710: Bluetooth missing on HP ProBook 4710 s (Windows 7 64-bit) - Intel WiFi - Link 5100 AGN

  Hello

  I have a strange problem:

  I have two HP ProBook s 4710 here in front of me. The two "seems" to have the same hardware inside (I don't see any difference on the stickers in the back).

  I have install both of them with the same USB with Windows 7N 64-bit.

  After the installation is complete (no additional driver installed).

  the first bluetooth ProBook has

  the second bluetooth ProBook has NO!

  I checked the BIOS, every two active a bluetooth settings on both.

  WLAN works on both.

  On the first s I can also install the bluetooth drivers latest, on the second, I can't. Always the message occurred ("no device was detected. Make sure that... »).

  Device Manager indicates, the two ProBooks Intel WiFi - Link 5100 AGN, the first s also Bluetooth-device listed, the second of not.

  What the hell is going on here?

  Hello:

  It is very strange because the HP Wireless Assistant software is registered directly on the support page and driver 4710 under the solutions section.

  If this is the case, try the latest HP Connection Manager software which does the same thing the software assistant wireless.

  Here's the theory behind your dilemma (except radio BT died).

  This laptop once had the connection manager (since the software assistant Wireless does not) installed, and you can use this software to individually disable bluetooth or devices rather than using the wireless button wireless.

  I guess that for example, turn off the stereo bluetooth with the connection manager to save a small amount of battery power, which increases the time before having to recharge the battery.  But you can still use the wireless.

  The hardware button turns both off the coast.

  The big problem is...

  If none of these devices are turned off by the wireless assistant or the connection manager software and that you reinstall the operating system or to update or other, wireless or bluetooth devices do not appear in the Manager of devices as if they are dead or don't exist.

  And what makes this more puzzled, is that if you check the BIOS, you will see that they are present and active!

  The only way to make them work again, is to turn them on by using the Deputy Director or the wireless connection software.

  This is why it is absolutely essential to ensure that these devices have been turned on before you reinstall the operating system.

  For those people that upgrading to W10, none of these programs work on W10, so if the BT has been disabled, the user must return to W7, activate the bluetooth, uninstall the connection manager or the wireless assistant software, reboot, ensure that the device is always on and then upgrade to W10.

  Here is the link to the software of the support page for your laptop connection manager...

  FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53394.exe

  If this doesn't work or the other, I suspect that the BT module does not work (all hardware failures).

• Intel WiFi Link 5100 network card - cannot detect wireless networks

  I have a HP Pavilion dv7-1270us. My wireless card is an Intel WiFi Link 5100.

  Running Windows Vista 64 bit, Ubuntu Linux, Linux Mint and Fedora Linux (various versions, all), the wireless works fine. My desktop computers to work with wireless cards to connect to the network work very well, and all computers (except mine) to connect to my home network very well; which means that it is not a problem with wireless networks, or with my network card. I try to manually connect to the network, but it can't find it. Diagnosis requires that the card is disabled, and that I should turn it on via the switch on my laptop running: fact.

  During the installation of Windows 7 64 bit, I cannot see wireless networks (and therefore unable to connect). Re-formated and reinstalled again, check the wireless connectivity between each batch of Windows Update, but it has never worked.

  I downloaded the latest drivers from Intel, via Microsoft Compatibility Center (version 15.2.0 driver).

  There is no system restore option because he has never worked as a first step, except in all other OS, I got on the computer. Microsoft Compatibility says the map is compatible, then Device Manager shows no problems. The network adapter is active via switch on my laptop.

  Happy that you guessed it sorted!

• Satellite P300 connected to the WiFi router, but no internet connection

  Help!

  I have a Satellite P300 installed with Windows Live Onecare... and a netgear Rangemax wireless router
  I have no idea as to overcome this problem... I just moved house and it worked just dandy in the old place

  Any suggestions would be greatly appreciated.

  Thank you

  Hello

  If everything worked correctly in your old House, then I guess there is no problem with the laptop but the router is simply not configured property or there is a problem with your ISP (internet service provider).

  Maybe you should get in contact with the ISP and need to check if the connection is ready and available!

  Welcome them

• Satellite P300 - 19 p - WLan does not work

  Hi all

  I recently bought a Satellite P300 - 19 p and at home I had a connection to the LAN cable to go online but 2 days after purchase I flew to Africa for a year and now when I try to connect to the Internet wirelessly, I discover that the bleeding thing doesn't have a working wireless driver.

  I am really disappointed and frustrated, I installed drivers before and the Toshiba driver on drive C file shows a driver by Atheros wireless and I installed it but it will not appear on the Device Manager.
  I copied a driver realtek on a disk and loaded, it appeared on the Device Manager but wouldn't work, came up with the code 10 error?

  When I turn on wifi radar it keeps saying "the wireless network device is disabled. Please activate"- large just give me an idea how to!

  I can't connect my laptop to the internet and it smells just a waste of money and be out here is not anywhere I can take it to!

  Can someone offer help and why not the manual provided with the help of these things!

  Thanks in advance!

  > When I turn on wifi radar it keeps saying "the wireless network device is disabled. Please activate"- large just give me an idea how to!

  I think that this problem of WLan is not related to the missing driver, but on the fact that your WLan is not enabled!

  Then all first move the WLan switch on IT and then use the FN + F8 key combination to select the WiFi network!

  By the way; isn't your Atheros or Realtek but INTEL WLan card wireless network card!
  The driver can be found here:
  http://APS2.toshiba-tro.de/WLAN/-> Intel PRO/Wireless 3945/4965/5100/5300