IntelliPoint 8.2 will not detect the 4000 Wireless Mobile mouse

Similar Questions

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• J4580: J4580 will not detect the alignment page.

  My J4580 that works very well for years, now will not detect the alignment page after you print and put on the scanner bed.  I try three times and it then goes to the default alignment parameters.  It still prints but text tends to little fuzzy.  What can I do to fix this?

  Hi @BruceK43,

  Thanks for joining the Forums of HP Support for a solution to your problem of alignment.

  I understand that you used a HP Officejet J4580 all-in-One printer with a Windows 10 computer but when you try to only scan the alignment page, the printer is not detected by the alignment page returns to the default alignment parameters. I would like to help with that.

  Here is the document of support designed to be used with this problem - a "alignment failed" Error Message appears on the printer control panel.

  Please let me know if that solves the problem, or if you need assistance.

• My Windows 7 computer will not find the networks wireless after a system restore.

  My Windows 7 computer is not find wireless networks after I did a system restore. It was perfectly good wifi before the system restore and other members of my family have a great connection except me is not a problem with my router. I think I know what the problem is, but I just don't know how to fix it. So there you go. I did my restore system about 2 days after that we moved on the provider of internet/tv "Comcast" to the tv/internet provider "Verizon". what I think has happened, is that I restored my computer to the point when we had no Verizon so that he could not find the network. Now, since we have Comcast it won't identify this network either, so maybe some of you out there could help me. : D

  Hello Nicolas,.

  Thank you our writing about Microsoft Community.

  If your computer has a wireless network card, Windows will automatically detect the networks wireless in range of your computer.

  You may encounter network or problems of Internet in Windows for several reasons.  Some common problems that can cause these problems are:

  • A wireless network adapter switch that is not enabled

  • WEP, WPA, or WPA2 key or password security issues

  • Cables that are not connected correctly

  • Corrupt or incompatible drivers

  • Missing updates

  • Network connection settings

  • Hardware or software problems

  I would ask you to check out the troubleshooting steps provided in the articles below and check if they help you solve the issue.

  Why can't I find a wireless network?

  Wireless and wired network problems

  Here are some links to site Web de Support of Comcast, who talk about troubleshooting of XFINITY Internet connectivity issues.

  XFINITY TV App: Can't detect your XFINITY home network

  The problems of XFINITY Internet connectivity

  Hope the helps of information provided. Do we know the State of the question, so that we can help you further.

  Thank you.

• the usb is stuck on the usb plug on the underside of the mouse, microsoft 4000 wireless mobile mouse

  Well I was being a fool and pasted my usb key to connect the mouse to the computer in a hole and he is now stuck I tried it out and after a little research I discovered that I stuck the USB to the USB jack on the bottom of the mouse, but why didn't he come?

  Hello

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the Microsoft Wireless Mobile Mouse 4000, being stuck on the USB. It must be hard when something that is important to you does not work as expected. I appreciate any effort that would put you in all. I will guide you in the right direction.

  To help you with the hardware components of the mouse, I wish that you contact Microsoft Hardware Support for assistance.

  Check out the link-

  http://www.Microsoft.com/hardware/en-in/support/contact-us

  Back to us for any questions related to Products from Microsoft or the Windows operating system. We will be happy to help you.

• Wk2 will not detect the HDD on Portege 3480CT

  Hi all, been tring this for 2 days now and I have no idea. I want to install win2k on 3480CT but the win2k installation does not detect the hard drive... It will detect WinXP, win98 detects...

  I have the latest version of the bios, I start to think win2k is in need of a driver for the reader, but I'm not finding.

  Help...

  As mentioned for install the W2k you n t need additional drivers.
  I also recommend the HARD whole disk formatting and delete all partitions.

  In addition, you must use an original CD of Microsoft W2k. I read on the net that some people wanted to use the copy of the CD W2k, but this CD is not bootable.

• My macbook does not detect the dell wireless mouse

  I have the macbook air. I tried to connect my macbook to my Dell Wireless mouse. But my macbook could not detect the mouse

  Without a model number, we cannot exclude that particular mouse is incompatible with OSX, especially if it is old.

  OS X pair with a large number of devices bluetooth automatically, but some need to be put in pairing mode.  You will find the Dell mouse model and see if that is his business.

• Have a new computer running Windows 7. Microsoft 4000 wireless mobile mouse: left click does not work, can not solve the problem.

  Have a new laptop with Windows 7, ASUS Intel-i5. Initially, the automatic installation of my Wireless mobile mouse 4000, which I had used with XP, has worked. Only problem was that the mouse was stubborn, when you attempt to left click: i.e. get something - and persistence was needed to get there. Now I can not at all to a left click. Tried all resolution of known issues, left click procedures still dead in the water.

  Anything with moving parts end up by wears.  I've had several byte the dust.  Speaking of the dust, maybe the dust and mold were inside.  Invest $4 and find out.

• The lost Microsoft 4000 wireless mobile mouse transmitter!

  I lost my transceiver "mouse Microsoft 4000 wireless mobile. Can I use my mouse without transmitter/receiver?

  No, the receiver is a necessary element of the mouse.

  They are paired single so I do not think that you will be able to replace separately.

• Dysfunctions of the Microsoft Wireless Mobile Mouse 4000 Nano transceiver

  Microsoft Wireless Mobile Mouse 4000 Nano transceiver malfunction, overheated and burned my hand, how to contact Microsoft and get a new mouse?

  I bought it on a year ago, worked well until the transceiver overheated and did not get recognized more by any pc.

  Hello

  The reasons of the overheating of the transceiver are not known, because it was not isolated incident, please go to the link provided below for more information on how to replace Microsoft software or hardware, order service packs and replace product manuals.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  You can also get in touch with Microsoft hardware support for assistance.

  Contact us

  http://www.Microsoft.com/hardware/en-us/support/contact-us

   

• Please help me... Fingerprints dv3 will not detect the device drive.

  I buy the HP Pavilion dv3 - 2165ee Entertainment Notebook PC new this week...

   

   

  My problem is that the fingerprint does not detect my biometric reader...

  whenever I take digitalpersona notification the finger print reader has not detected.

  my windows system is Windows Vista... and I try to go to control panel in Device Manager biometrics is not there. What is the problem...

   

  Please help me...

  Hello

  You can try the solution posted below thread:

  DigitalPersona, validity of fingerprints fingerprints and Windows 7

• ESXI 4.1 will not detect the RAID 5 array

  Hi all

  I try to install ESXI on a HP ML350 G6.  When I configure the table as a RAID 5, ESXI detects the logical drive, but watch used and 0 bytes of free space I would install it.  If I reformat the table to a RAID 10, ESXI it detects perfectly.  I really need to have it configured as a RAID 5.  Any ideas?  Thank you.

  -Mike

  Welcome to the Forums - what size are a table you are trying to create? VMware ESX and ESXi can access tables less then 2 TB in size-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Dysfunctions of the Microsoft Wireless Mobile Mouse 4000 Nano transceiver... Burned my hand and melted!

  So this is the second of these that I had and both have experienced the same problem. They work great for a while (a while being a coupe of weeks) and then one day the computer just indicates that Windows does not recognize the device and it malfunctioned. Then, when I go to take the nano transceiver it burns my hand and blends almost. Please, someone tell me I can buy the nano transceiver separately. I now have two of them (well, Microsoft has replaced the first) and none works. I think that Microsoft won't keep replacing the entire unit for me, because they didn't need to send me the old one first. I would like to just buy some transceivers so that I can keep 'in stock' so to speak when they go wrong (if all goes well they won't be). It is a great mouse, it's just the transmitter/receiver that needs work. Thanks for any help!

  Transceivers are not sold separately therefore communicate with Microsoft and explain the problem.

  At the time of the first wired mouse for Internet Explorer, I got about 4 replaced at different times and never had to send it back.  I guess that the questions were grouped because finally they worked just, in fact two still work fine on the server PC that are average close to go wireless.

  Just be careful and don't ignite or burn.   I would add that I have the mouse BlueTrack Explorer on my desktop that works wonders and the Mini version on my netbook.  Both were perfectly executed.  I like the full size version because its rechargeable (when I remember to "anchor") so no more batteries wear out.

• I have a Microsoft 4000 wireless mobile mouse. The movement of the boom is jerky and does not move easily.

  What is the problem and how to fix it?  I use Windows 7.

  Replace the battery.

• Lenovo M58 will not work with Microsoft Wireless Keyboard & mouse game

  I'm having problems the new buy Lenovo M58 with Microsoft Wireless Entertainment Desktop 7000 together.

  He works after the software Intelli. But the problem reoccurs after a reboot start / cool.

  Turn on the system until the logon windows, the keyboard screen isn't answer to everything.

  You need to connect a USB keyboard and a mouse to connect, and then perform step below in order to get it back if you work.

  (1) to reinstall Bluetooth transceiver and wait a few seconds

  Or

  2) press the Bluetooth detection on all devices:
  -Mouse, keyboard & ARVA

  In vain he will be again after a reboot or a cool start.

  I found another similar claimed.

  http://forums.MajorGeeks.com/showthread.php?t=195635

  Hi all

  Problem solved by updating to the latest version of the BIOS.

  Thank you.