Interactive data sheet with pictures for sharing and updating

Similar Questions

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• Yesterday, I bought photoshop elements 12, it came with disks for Mac and Windows, since I own a Mac and a Windows machine I would like to know if I can legally install on two machines?

  Yesterday, I bought photoshop elements 12, it came with disks for Mac and Windows, since I own a Mac and a Windows machine I would like to know if I can legally install on two machines?

  Yes, you can install it on two computers, and they can be a mac and a windows computer.

• Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, s

  Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, when he got the address "nordensstjrnor". That me ok at first, but now I really need to give the first address once again, "nordensstjarnor". But when I try, the alternative of the site of ' publish on ' old isn't here. And if I try to create a new one, but with the old URL, the box turns red. What can I do?

  The reason why you cannot change nordensstjarnor.businesscatalyst.com is because a different Adobe ID is used for the publication of this site.

  t * [email protected] is used for the publication of nordensstjarnor.businesscatalyst.com

  t s. * [email protected] is used for the publication of nordensstjarnorindex.businesscatalyst.com

  You must make sure that Adobe ID is used in account publish, so that you can see a list of the websites published under this account. Go in Edition > Preferences > publish on Business Catalyst > publish with accounts

  You can pass the accounts for you can also make changes to the sites.

  Thank you

  Sanjit

• apostrophe problem for insert and update pages

  I read in the book "Dreamweaver MX dynamic Applications" that a solution must be placed in the ASP to insert code and form fields record updated to replace the apostrophes by their equivalent html entity character (') before its entry in a database do not have SQL wrong interpret the entered text. How would you say this hotfix is essential because I tested my form with apostrophes and have not gotten into trouble yet?

  > I read in the book "Dreamweaver MX dynamic Applications" as a fix
  > should
  > place in the ASP code for insert and update the fields of the registration form to
  > replace
  > apostrophes with their equivalent html entity character (') before his
  > entry
  > in a database do not have SQL wrong interpret the entered text. How
  > Essentials
  > would you say this fix is that I tested my form with single quotes and
  > have
  > not got any trouble yet?

  If you are user of Jack and sending it to the db in plaintext in
  the query, and then people can use techniques of SQL injection basically destroy
  your database:

  http://en.Wikipedia.org/wiki/SQL_injection

  So, Yes, it's a pretty serious problem.

  -Darrel

• Add ons said display Adobe Flash Player RealNetworks (tm) RealDownloader PepperFlashVideoShim plugin out date even after I have download and update. It s

  I have the version 1.3.3.66 Adobe Flash Player RealNetworks (tm) RealDownloader plugin PepperFlashVideoShim., which is obsolete. I click "update now" and go through the process installation, but after that it says always "obsolete" and "update now".

  Also have Adobe Flash Player Shockwave Flash 18.0 r0, which was recently updated.

  Should I just delete the RealDownloader?

  Thank you.

  Pepper plugins are not used by Firefox.

  This API is for Chrome and Opera browsers, and it should not even appear in a list of Firefox Plugins or the Manager of the Addons > Plugins. It is a 'fault' or a Bug in the installer and must be fixed by Real Networks. My advice is to just ignore it.

  Now, if you see this message here - http://www.mozilla.com/en-US/plugincheck/ - can provide you with a screenshot of what you're watching?
  He could help us if or when that happens in the future.

  See this support article.
  How to make a screenshot of my problem?
  It is best to use a type of compressed as PNG or JPG image to save the screenshot and make sure you do not exceed a maximum file size of 1 MB.

  Then use the button Browse... below the text message response area to download the screenshot.

  This Plugin Check page was performed on all browsers of 'service', but has recently Mozilla Firefox only and they cannot switch off analysis for API extensions for other non - Mozilla of. IOW, do not allow a person who uses IE to use the Web page (as I just experienced when I used IE here), but the scan stiil looking for ActiveX and pepper API 'plugins' in the registry?
  Perhaps "other browsers" are disabled temporarily because of the recent eruption of updates Flash and Mozilla blocking the exploited, older versions of Flash, and once things return to normal on this page loads they intend to allow "other browsers" to access this page?

• steps for Data Guard with a primary eve and 2

  Hello
  
  Database: 10.2.0.4, 11.2.0.1
  Operating system: Windows, Unix
  
  A > primary database
  B > database ensures 1
  C > database ensures 2
  
  I want to configure * 2 Eve * databases for the single primary database.
  Allows to take, A, B and C are my machines. My Data Guard configuration will be like, * archive logs will be mobile * A to B and A to C.
  
  If I do all passage between and B , now that b is primary and remaining has and C are pending data bases. At this point also, Archives of the newspapers should move from B to A and B to C. In addition, even should arrive from C to A and C to B, if I make the passage between B and C. If all goes well, then I'll do switchback to the main database (A) primary.
  
  How should I mention PFILE in all machines , parameters like
  LOG_ARCHIVE_DEST_1 = LOCATION = < PATH > - LOCAL path ARCHIVE
  LOG_ARCHIVE_DEST_2 = SERVICE =
  LOG_ARCHIVE_DEST_3 = SERVICE =
  FAL_SERVER =
  FAL_CLIENT =
  STANDBY_FILE_MANAGEMENT =
  
  In my tnsnames.ora , primary, standby1 standby2 my service entrances and are even in all of my machines.
  
  Please suggest me, how can configure my pfiles in machines?
  
  Thank you
  Therese

  Please don't forget to update the thread with useful or correct, if you find the answer either.

  Kind regards
  SQuadri

• Need help with query for points and polygons, 2 tables of

  Hi all
  
  I'm slowly stumbling along trying to figure things out space.
  
  I have two tables, GEO_POINTS:
  (
  DEP_ID NUMBER (12) NOT NULL,
  LINE NUMBER 4 NOT NULL,.
  MDSYS. POINT_LOC SDO_GEOMETRY
  )
  
  and POLYGON_AREAS:
  (
  POLY_NAME VARCHAR2 (120 CHAR),
  POLY_DESC VARCHAR2 (120 CHAR),
  MDSYS POLY_POINTS. SDO_GEOMETRY
  )
  
  Neither table is engraved in stone, if any, I can change some structure.
  
  I'm trying to understand how to write a query to retrieve all the points in a polygon, perhaps even with an optional buffer provided by the user.
  
  Conversely, I would probably also need to know what polygons a point would have drawn in, and it's the only request I could make any progress on.
  
  What I have so far, which is not working properly, is the following:
  
  Select * from deposits_search where dep_id in)
  SELECT dep_id
  OF geo_points, polygon_areas
  where (sdo_relate)
  poly_points,
  (SELECT point_loc
  OF geo_points
  WHERE dep_id = 10282444),
  ("mask = ANYINTERACT") = "TRUE");
  
  In the light of the foregoing, I want to select all the lines of a third table (DEPOSITS_SEARCH), for all polygons which is a point. The DEP_ID column is my primary key for most of the data tables in the database, and the number rose in my application query. However, the above returns all rows. It should only return one, because I only have a polygon of test defined so far.
  
  Any help is greatly appreciated. Thank you
  
  Bill Ferguson

  in which case you must include a line of buffer for the interaction between the points and polygons (with a stamp),

  better, you use the SDO_WITHIN_DISTANCE operator.

  http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i77653

  Not so sure what you mean with "I always have problems while providing a point location and extract the polygons that point would be plotted in" as so-called before unless you want that as a 'transitional instance of a geometry. (Specified using a variable binding or a builder SDO_GEOMETRY.) »

  http://download.Oracle.com/docs/HTML/B14255_01/sdo_operat.htm#i78531

  Read what geometry2 means in there. Read the examples and you will see that you have the geometry second in space operator as a builder. If this is what you need.

  Luke

• Missing pictures for backup and restore

  I had the apple store yesterday help me to back up my phone on iCloud. They replaced my phone (broken screen) and I asked the guy about 4 times if all my photos would be restored.

  I paid for extra iCloud there and for space so I could back up everything, and then we did the back upward.

  When he passed me the iCloud I only saw my photos up to Christmas because it was just before my iCloud a lack of space and stopped backup. He assured me that they appear on the iCloud immediately and he went ahead with the replacement of my phone completely and I sat there for 20 minutes, while it resets my phone on the cloud image. The guy told me it would take until nightfall for all my pictures to come through, but even now Im still missing these photos on my phone and iCloud...

  Can anyone help?

  Welcome to the Apple community.

  If you were using iCloud photo library, your photos on your phone will not be included in a return to the top. iCloud photos will be uploaded to a new phone when you sign in to your account. However, if your entire collection had not been transferred to iCloud, because you were short on space iCloud, you allow them to download your old phone as soon as you had bought more storage, before they would like to upload to your new. It sounds as if you don't let all this happen.

  You still have your old phone.

• Problems with picture Screensaver.scr and MSCVR100.dll

  I am running Windows Vista Home Premium on a 32-bit system on an HP Compaq PC.

  Following automatic updates from Microsoft and ATI Radeon, I get an error message when my PC is trying to activate the screen saver.  The screen saver is set up through my library of images and had worked perfectly for four years before the recent updates.  The error message at the start says:

  PhotoScreensaver.scr impossible to locate the component - "this application has failed to start because MSCV100.dll was not found.  Reinstalling the application may fix this problem. »

  Perhaps foolishly, I then bought what I thought, it was a problem of DLL - files.com, a trade name of Cleverbridge.  He said it had corrected flaws 1 200 on my PC (!), but it has not cured THE fault and the following error message:

  Problems with Photo Screensaver.scr - Bad Image: "MSCVR100.dll is not designed to run on Windows or it contains an error.

  I uninstalled the stuff of DLL - files.com and I searched for a solution on Microsoft Answers.  Depending on experience and advice previous users, I uninstalled the previous Visual C++ Redistributable update packages and the ATI update and installed the redistributable Visual C++ 2010.  No improvement.

  Then I tried to restore my PC to a date before the problems, but the restore function did not work and reported that she had failed for undisclosed reasons.  This has happened several times, no matter what point restoration that I use.

  I'm not particularly computer literate, so would like some simple tips on how to cure this.

  Thank you

  Hello

  I suggest you to install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

  Download files according to your operating system version. I suggest you to install all the versions as they may be needed for different programs. Check in programs and features, is what shows you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)
  http://www.Microsoft.com/download/en/details.aspx?ID=5555

  Package redistributable Microsoft Visual C++ 2010 (x 64)
  http://www.Microsoft.com/download/en/details.aspx?ID=14632

  I hope this helps.

• Hard drive partitioned using its missing data after restarting the system, sharing and management of the computer

  Hello

  I have a Toshiba Satellite with Vista and since my laptop came with only a single 250 GB, i.e. C:\ partition I tried to partition more than I did the following, I had about 90 GB of data to start with which I transferred to a portable hard drive then:

  Panel--> Admin Tools--> computer management--> management disk storage--> right click C:\ Drive and reduce volume--> it showed only 50 GB of space heat shrink and I created a new volume with this space (F:\ 50 GB)--> transferred all the files to the new 50 GB portable HD space F:\ and remaining 40 GB on the drive C:\

  When I started my computer after a few hours, the new partition F:\ was missing! In addition, there was only the C:\ drive of origin with 40 GB data that I had transferred + 45 GB of data I think it was there previously because the installed files.

  C:\ was so now 40 + 45 = 85 GB without a trace of the 50 GB of data on the new partition I created!

  I had recovered my system to a day before before I did it, it could be the reason? Now, when I try to go to System Recovery it does me not an option for a restoration of watch system.

  To be sure, I now have a backup of the 40 GB of data from the C: drive, but I lost the data of 50 GB of the new partition, and since I have not written new data on the drive is possible that it's still there?

  When I try to search for some files I know research shows me the name of the file, but the file does not open, and the location of the file shows that it is not accessible.

  Kindly advise me on what can be done given that 50 GB of data is really important.

  Thank you

  Go to disk management and open it in full screen and then press the PrtScr button.  Go to start / all programs / Accessories / Paint and open the program.  Go to Edition and click on paste.  Then go to file and click on save as and select a .jpg file type and call the disk management and save it to your desktop.

  Then go to http://skydrive.live.com/ (you will have to perhaps sign up and maybe download some programs, but this will give you a free online place where you can store files for others.  Once the page to the top, click on add files and navigate to the file you just save it on your desktop and add it to one of the folders (I suggest the Public folder).  Once it clicked, and information about it will appear at the bottom right, including where exactly the file.  Copy this URL and include it in your next post.  I would like to see what looks like disk management without asking a thousand questions to describe everythhing for me.

  If you did a restore of the system already on the previous day, there is probably no new restore points created since then, so there is no option to do a system restore.  In addition, a system restore would not solve this problem - this is way beyond its capabiliities.

  Download the free EASUS Partition Manager: http://www.partition-tool.com/ and run it to scan your drive and see if it finds anything Disk Manager can not - it "s possible he can pick up our lost F:\ partition or unidentified space which could be this partition but not correctly identified.  In a same, t I would like to see if it detects anything useful (and it can also be useful the fixing of the problem if we can find it).  Moreover, the total space of the C:\ drive is now is what it was before you have shrunk or it it showing the size reduction that you can expect if the new volume had actually been created?  Let me know what you find if anything.

  Right-click on your CD-ROM drive, and then click on change drive letter and paths.  Click on edit and then right click on the drop box for the available letters.  F shows as available or is missing in the list?  Leave it (don't change anything in reality - I just wanted to see if F has shown as available since if it was assigned (such as C: is assigned) should not be shown at the top on the list.)  I would like to know if he was there.

  I hope this helps or at least gives us some clues on how to solve the problem (whatever it is).   Keep me informed.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• export excel sheet with picture

  Hello!

  I found as3xls in order to export data as an xls file. However, it is not possible to add images to the cells at this component.

  is it possible to add a picture to a cell in the worksheet (for example, in a datagrid) and export that data all together in the form of file-xls?

  THX, judi

  Unfortunately it is not possible yet...

• Failed to update repeated for KB970430 update with error Code 8024200d and update KB936330 with 8024200F error Code

  I had a really hard time, install a new update for my computer. About 2 months ago, I restored my computer to its factory settings reformat that and reinstalled windows vista Ultimate. Here's the info from my computer:

  

  Here's a copy of my story to update with the two updates that refuse to update

  

  Here are the details of the first error that is for Vista Service Pack 1:

  

  Here are the details for the second error which is for authentication information:

  

  I tried searching for an answer to this problem, but I have been unsuccessful so far. I would be grateful for some assistance.

  Thank you

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now to reset Windows Update by...

  How to reset the Windows Update components?
  [KB971058 access via IE only;] Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  Repost: Support for Vista Gold (no Service Pack) ended on Tuesday 13 April 2010. Computers still Vista gold "will no longer receive software updates (e.g., SP1) from Windows Update" before SP1 was installed manually (which will require several prerequisite updates be installed first). IOW, you may not be able to install updates until & unless you get SP1 installed manually.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Need help with keyframes for start and stop an effect

  I use a mask and blurred for a few seconds. I understand that I must use keyframes to indicate when to start and stop this effect in the video, so that the same area is not trimmed for video full.

  The problem is, I can't find help by correctly setting the keyframes. When I opened the menu keyframes in the effect, it seems that I must together for both the mask took and the blur effect. I did... to start and stop at specific times, but the rest indeed throughout the video, so of course miss me something by using keyframes. The manual to create effects is not useful. I need assistance with keyframes as what I'm doing is clearly not working. Help!

  If the mask does not move that you don't have to set the keyframe. For the blur, click the stopwatch next to 'bluriness' add keyframes as below, the Reds don't blur and blue those maximum blur this fade effect.

• How to handle parsing JSON with Java for String and String []?

  I have a string of JSON (sample) as follows and I created a POJO Mapper using Jackson to manage the same, but as I saw the data I noticed the problem mentioned

  How should I treat the underside of change of the data of String() string in my class Mapper POJO of ideas would be helpful

  < code >

  @JsonIgnoreProperties(ignoreUnknown = true)
  public class Ref implements Serializable {
  
  @JsonProperty("BBT")
    private String BBT;
  
  .... more code here
  
  
  
  //Sample 1
  "Ref": {
        "ISN": "AEBDC44",
        "CCD": "213128908338",
        "BGID": "XCAS3213213",
        "BBS": "23123123",
        "BBT": "CCC",
        "WRT": "POP91230",
        "SDL": "290123",
        "BUN": "ZZRET10PV4",
        "BCSP": "ZZRET10PV4",
        "CSP": "ZZRET10PV4"
      }
  
  //Sample 2
  "Ref": {
        "ISN": "AEBDC44",
        "CCD": "213128908338",
        "BGID": "XCAS3213213",
        "BBS": "23123123",
        "BBT": ["CCC","AAA"],         //Sometimes recevied as an String array instead of String
        "WRT": "POP91230",
        "SDL": "290123",
        "BUN": "ZZRET10PV4",
        "BCSP": "ZZRET10PV4",
        "CSP": "ZZRET10PV4"
      }
  

  < code >

  Found the solution.

  Thank you seems in any case this forum is not very active over after stackoverflow etc. dominating the WRT forums programming and all

  In the case of some1 should

  Change return type

  Converted to object.