Interesting UI control

Hello

This control (marked in red in the image), I've seen a few times in these apps as 'BlackBerry World' and 'phone '. And now I want to use it in my application, but I can't... I can't even imagine how to call looking for good...

I wonder if this control can be implemented using standard elements with waterfalls.

Did you ever find it? Help, please!

SegmentedControl: http://developer.blackberry.com/cascades/reference/bb__cascades__segmentedcontrol.html

Tags: BlackBerry Developers

Similar Questions

  • Windows update error 80072EFD

    Hello
    I have a laptop of old P750 for 2 months, after they need to do a restore to a disk upward, I now get the above error.
    I then decided to do a cover of toshiba with a clean install and still get the same result of windows update is not not able to connect to the server.

    I tried everything I can find this error, including the verification of the proxy settings for WU, reset the proxy via CMD prompt settings.

    I noticed something interesting while control validation using microsoft MGA diagnostic tool, where windows has been listed as a hat, but note some reports as:

    Validation code: 0
    LegitCheckControl: N/a, hr = 0 x 80070002
    signed: n/a, hr = 0 x 80070002

    My understanding is the way to 0 x 80070002 he couldn't connect identical to WU or that files are missing.

    I have rebuilt that recommended such c:\Windows\SoftwareDistribution records, turned off all firewall, removed antivirus / software malware but still no luck.

    It seems funny how the same thing happens even after a clean drive toshiba recovery.

    Any suggestions?
    BL262000

    Hello

    If you check Google and error code 80072EFD you will find many pages where you can find explanations why should be done about it.
    It's typical Microsoft problem and the solution must be sought by Microsoft.
    Have you checked
    http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80072efd or http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-update-error-80072efd/398546d2-6b6d-47a0-b075-82d815fa9a8f?

  • Comparison of references has failed

    Hello

    recently, I observed a strange behavior when you try to compare two references referring to the same controls typedefed.

    What I want to achieve:

    I created a control typedefed (a group of radio buttons with additional information) for use on the front end of the user interface. To manipulate the content, I created a Subvi, which takes a front control reference. The feature is not interest - he controls the values represented by radio buttons, so it is a sort of "advanced radio button control.

    Now, I need to address the data structure, the cluster components. The first approach was to compare the labels with a hard-coded string. But then I ignored this first attempt because if someone changes the labels of front-end control the Subvi is no longer visible reason. So I decided to compare the references.

    So far the story of presentation...

    Now, I have observed some kind of pathological behavior - and this is my question:

    Attached to this post is a little demonstration VI which should clearly state the question.
    First of all, I created an instance of the control. For simplicity let's call him "MyControl".
    Then, I created two references to this object.

    The first by selecting the Reference of the Server 'VI' in the 'Application' menu. Done, right click on the reference and choosing the menu option 'Link to .../Pane/MyControl' creates the link to the control. If I open the same menu entry, there is no point of control in the menu (this becomes important later).

    The second, that I did a right click on MyControl and selecting the menu item "Create/Reference". As for the first difference this reference shows check marks in the entrance 'Link to... ". " of the right click menu.

    Both references seem to be related correctly to control if used to read or write all properties. But if I try to compare using the "Equal?" 'Différent?' or the 'Comparison' palette, result is inequality. Unless we compare the cast type numbers or references by itself.

    I know that the value of references may differ in value, but the comparison functions that must manage in resolving references before equality checking. (refer to the documentation for the range of comparison)

    Why the references are uneven? Also, right-clicking on the control or its terminal and by selecting "Find all references" in the menu right click - only considers the first of these two references.

    Is this a problem of referencing the typedef and contains the structure the typedef? (only typedefed controls behave as described, after that disconnection of the typedef comparison works)

    One last thing, I found out: select 'Link to .../Pane/MyControl' in the menu on the right - click with the button of the second reference (the checked input) connects the reference correctly, even for the comparison functions and function "Find all references" . As a result, the checkmarks disappear.

    How can I ensure a good related references? Is there a better way - more stable - to refer to a control by a label or a reference?
    Is this a bug? I'm using LabView 2011 (without SP1) on a computer laptop win7.


  • VPN/IPSec-L2L - Question?

    Hello!

    Recently, I was doing some troubleshooting on a connection VPN/IPSec Lan-to-Lan between a Cisco PIX515E and a Linux firewall. My question concerns the configuration and is not the problem itself.

    Traffic interesting (encrypted traffic) defined and configured the LAN of PIX (inside) and the distance public IP? Which means that the Peer IKE and the interesting remote control LAN/IP are the same... and it works!

    Any ideas?

    Thank you

    JP

    As long as you source the package from the local network of Pix to remote public IP, the tunnel will work well and works :-)

    So, if you really look at the fluidity of the traffic, you're sourcing traffic from Pix LAN intended to public IP remote that corresponds to the defined access list. Thus, the pix knows he has encrypt traffic and now seeks the cryptographic endpoint points (pix outside IP public IP remotely) and sends the encrypted packets. So, this configuration works perfectly.

    In fact, Pix will not allow Telnet the external of the pix interface unless the traffic is through an IPSEC Tunnel and it was one of the establishment who gave a telnet access to the external interface of the Pix, it's LAN to the public IP of Pix through an IPSEC Tunnel.

    Kind regards

    Arul

    * Please note all useful messages *.

  • camera raw in After Effects or creation. .... ??

    I need to know if there is a plug-in for the camera to use raw (Photoshop) in first or After Effects. .... The camera raw is ideal for video... would be wonderful that it filters in Pr or AE. It will be in anticipation?

    Yes... using the icon "+" at the bottom of the Layer palette, select sharpness. You can refine the four channels (RGB & Alpha) in motion coupled or sharpen each individually. You can also sharpen well AND "off sharpen" with this tool, because if you start to go to the left to soften the image, you can go a long way.

    Naturally this can be applied to layers inside or outside of the masks, which gives great flexibility. It is not quite the same that say Unsharp Mask with the tools available to you for this. But seems generally do a very good job when used with discretion... which is always the trickiest part about sharpening.

    I would also add that for people serious movies, video DSLR is way more sharpened the camera, watching their minds to 'pro' of the era 2000 video gear. Hard too strong rather than smooth as movies. I have learned to appreciate the aesthetics of this and do not sharpen my images in cam or post as much as when I started. I do part, not much. Often hidden. Most of the time I soften areas rather sharpen. Help run interest even in a less intrusive way?

    As stated, I'd like to control clarity and the section of LGV off Lightroom/ACR. As for the other things... controls created in SpeedGrade give great control and still show up fine at all levels & tel... I'm away until I'll use those and haven't found new interest curves controls.

    Neil

  • Blur of movement/before Lightroom and Photoshop

    December 23, 2011

    Hello:

    I'm interested in control/motion blur in photography, before Lightroom and Photoshop.  A lot of photo subjects (for example, the leaves, the cars, the waves) is moving.  I calculated the size of the pixel of a photo.  It is not only the information to pixels of the sensor.  For example, with a certain lens zoom and focus distance, each pixel represents a definable area of the image.  Then there is the printing area, which corresponds to the original area of the image.  There are a lot of variables to consider.  Movement both within and beyond each pixel affects the image.

    I'm interested in literature, documents or people who will guide me in the understanding of the control of movement/blur in the picture.  With this, my photos will be much better, and easier to modify.

    Thank you for your time.

    Scott

    Get books about photography.

    There are 3 variables to consider in digital photography;

    Shutter, f-stops and ISO speed. To reduce motion blur, the best way is to increase your shutter speed.

    Fly and get these pixels out of the autopsy table.

    Take photos, adjust certain variables, take a few pictures.

    Obsessed by a granular level will take you far actually take pictures, or at least all of the pictures that are going to feel proud of.

    We all want the excitement of taking a great photo.

    But they are ultimately dependent on more heart than cold logic.

  • Remove Security / difficult questions in IOM

    Hello
    I want to delete the IOM issues posed at the time of the first connection, I won't use it. What should I do for this?

    Thank you

    I don't have a Setup IMO I can return to easily, but iirc, the setting should be something like PCQ. FORCE_SET_QUESTIONS. There is another parameter named XL. ForcePasswordChangeAtFirstLogin in the case where you are interested in control of that.

    I hope this helps.

    -Vinod

  • Question 3D: Controling Focas Point camera? (or 'Point of Interest')

    I want to use the boredom of the options but with the DOF, adjustment of the focus on the subject area. It just seems to be where ever. Any ideas?

    I found my answer on YouTube. When you're in 3D for the current view options, hold down the Option (Mac) Alt (PC) key and click on the desired image point. But it "works a little'. The other option is to make the value of extreme depth and adjust the Distance until you have the good point of interest.

  • Apple TV 4 remote stop working after 1 day, I charged all night, but it is still dead. Interestingly enough however, still control the volume on my TV.

    question summed up in the title

    If the volume works the battery is fine.  Sounds like a question of ATV:

    Get help with audio, video, or power on Apple TV - Apple Support

  • just your software uninstalled - don't want to support a business that trys to control the opinions of peoples - bye.

    Sorry to hear that a company with promise both looked to try to control thought and freedom of expression - here in the United States of America.

    Very disappointed - leaving your products to others.

    Hey again once, personally I agree with you that Mozilla should focus on a specific goal as advancing the State of the Web (openness, innovation and opportunity) that we can all unite around, any policies/religious/personal views we might argue otherwise.

    As I and most of the other AIDS in this forum are volunteers and other users of Firefox & mainly focused on technical support, maybe this isn't the best place to discuss the issues of organizational policy. If you are interested in pursuing the conversation, the governance of Mozilla mailing list at https://lists.mozilla.org/listinfo/governance would be the best place for your comments.

    Thank you!

  • Controls full screen not there to watch ESPN.

    Hi, so I can display the controls full screen in Chrome and IE, but not firefox? its strange. I don't want to switch to another browser, because I like really 28 FF.

    Some problems with Flash video playback can be resolved by disabling hardware acceleration in Flash Player settings. (See this article for more information on using the Flash plugin in Firefox).

    To turn off hardware acceleration in Flash Player:

    1. Go to the Adobe Flash Player help page.
    2. Right-click on the Flash Player logo on this page.
    3. Click settings on the shortcut menu. The Adobe Flash Player settings screen opens.
    4. Click the icon in the lower left of the Adobe Flash Player settings window to open the display panel.

    5. Remove the enable hardware accelerationcheck box.
    6. Click close to close the Adobe Flash Player settings window.
    7. Restart Firefox.

    This Flash Player help - display settings page contains more information about the Flash Player hardware acceleration, if you are interested.

    Does this solve the problem? Let us know.

  • Looking for iChat as a program to control other computers

    I'm the Mac guy for all my friends and family. I use to use iChat to control their machines on the internet and help them solve problems and even to download and install the software. A year ago I finally moved to Snow Leopard to Yosemite as all my friends and family.

    Problem is that they now use face time on their phone to show me what the computer is doing and it is very difficult to see properly and everything is just more difficult.

    I know go to my PC, but this is a paid service. There is another thing that works like iChat done to allow me to control other Macs on Yosemite or newer?

    Looks like I found a solution. A program called TeamViewer in case anyone else is interested.

    It is very easy to install (important when you say that the other person to do by phone) and free for personal use (you pay for professional use).

  • HPPhoenixctrl: WANT to series PHOENIX - LED lighting control Solution

    I'm new to the forum and just got my new PHOENIX envy 860 - 180st, personalized with the following text:

    Windows Pro 64-bit 10

    Intel core i7-6700 4.0 GHz

    16 GB OF RAM

    512 GB SSD

    GeForce GTX 960 2GB

    No secondary drive (I store all the data on a NAS)

    Several Web pages featuring LED façade lighting, I understood that the 860 series provided a method to customize these lights.  I also believe I read that the 850 series could only turn.  However, I can not locate ANY documentation regarding the LED lights.  After hours of searching online, I only now have an interest to stop and reduce my electricity bill.  HP not me was not impressed by this "feature" negotiable.

    There is an application called HP Phoenix lighting (or LED) control which is used to control the LEDS.

    I found it in an old net while browsing through the subject.

    http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/missing-software-HP-envy-Phoenix-850se/m-p/5146673/highlight/true#M111153

    Check in the Control Panel, or type it in the search box on the systray next to the symbol for Windows. There could even be an icon that represents the control of lighting in the systray. My last HP 15 Omen product loan had an app called HP Omen Control, which allowed for control of groups of the backlight on the keyboard. She allowed the owner to make changes to custom groups of key color.

    If she needs relocation, then it must be done in the HP Recovery Manager. See reinstalling software and applications to the HP Recovery Manager.

    @NewEnvyOwner

    Try the following softpaq. It's called the HP utility control of Phoenix.

    http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71672.exe

    BTW, the HP representative, that you talked to was wrong. The softpaq were found in the download of the 850 self-service portal want to Phoenix by HP Expert @Dragon-fur.

  • Satellite A300D and ExpressCard Remote control

    Hello guys,.

    I own a Satellite A300D-135, y at - it an available for this model remote control? I'm looking for a remote control that fits in ExpressCard location as some HP models have.
    I looked at several Dutch hardware well known, but I can't find a remote that fits the ExpressCard location.
    I give many presentations and therefore use my laptop a lot. I would like to have a remote control that fits in ExpressCard location because that saves space and a remote control of such a size is easy to "hide" in your hand.

    Kind regards
    Hunterseaker

    As much as I know Toshiba doesn t offers remote control for this model of laptop. The question is whether a third party product is available on the market.
    To be honest I have no interest in something like that, but I just want to recommend you to visit the web page of Logitech. They have so many products for PCs and laptops. Maybe they have a solution for the remote control that you can use with your laptop.

    If you can find some interesting product please post the link.

    Good luck!

  • Control Panel opens at startup

    Control Panel opens at startup!
    How can I stop this.
    I recently installed antivirus software, maybe it has affected the settings?
    Any suggestions?
    See you soon

    Hello

    First of all it will be interesting to know from when it happened. If this started after anti-virus software, there is answer to your question.

    It's very strange. In any case please check in the Autostart folder if there is a shortcut in the Control Panel window. If so you can remove it and he is unbootable at commissioning.

Maybe you are looking for