Interference WiFi live-Roku?

In the process of upgrading and troubleshooting our network domestic wi - fi, I have stumbled on the interference of the signal direct-Roku a neighbor and am looking for suggestions on how to avoid new disturbances.

Our network (prompted and primary) is generated by a time Capsule (ac 802.11, 2.4 and 5 GHz) and extended by a 4th generation Time Capsule (802.11n, 2.4 and 5), but is in a fairly busy area (about 15-30 SSID is visible at any time) and drops or often slows.  Run the wireless diagnostics identifies a County Code error (and of course the channel congestion).  When I scan the visible SSID, one poster code from countries other than the United States.  This is the signal Direct-Roku (registered as the Q2 country code) and is strong enough.  Unlined home in aluminum foil, have no recourse?  I read about setting up a dummy network with an old router to avoid problems 802.11 d in crowded places.  This work with a wi - fi direct report?  Wouldn't it just cause the channel congestion more?

Our network (prompted and primary) is generated by a time Capsule (ac 802.11, 2.4 and 5 GHz) and extended by a 4th generation Time Capsule (802.11n, 2.4 and 5), but is in a fairly busy area (about 15-30 SSID is visible at any time) and drops or often slows.

With that many neighbors Wi-Fis, it can be very difficult for access point wireless of any manufacturer, not just the base stations of the airport, to find a channel "clear" they would not interfere with. Generally, should use an all-wired, not something you were hoping.

Run the wireless diagnostics identifies a County Code error (and of course the channel congestion).  When I scan the visible SSID, one poster code from countries other than the United States.  This is the signal Direct-Roku (registered as the Q2 country code) and is strong enough.

... and country Q2 code would be New Zealand. Direct-Roku is a Wi-Fi-to-peer network that allows the Roku and its remote control communicate directly. It is based on a Wi - Fi Direct connection, which can operate on networks 802.11a/g/n... which means that both the 2.4 and 5 GHz bands. Not 100% sure that the Roku devices operate on.

Unlined home in aluminum foil, have no recourse?

Unfortunately, not much. If you are familiar with your neighbors, you could try to raise the issue with them. However, even if they are willing to help, they, most likely, the same problems as you. Yet once, all wired connections will definitely solve this problem.

I read about setting up a dummy network with an old router to avoid problems 802.11 d in crowded places.  This work with a wi - fi direct report?  Wouldn't it just cause the channel congestion more?

... and more congestion is what will put in place and not a recommended solution.

Tags: Wireless

Similar Questions

  • All-in-one Deskjet 2540: reset password WiFi live with security enabled

    Good then everything was going well and everything until I one day decided to enable security of the printer and change direct wifi password. It was fine, because I instatly reconnected with the new password and never had to kick it manually again. then recently I accidentally forgot the wifi network and was invited for the password when you try to connect again. I don't remember. I tried everything:

    1. I have maintained the direct wireless button for 3 seconds until what it printed on the instruction sheet but no password was on it because of the security settings. To change it, I need access to SAP, which I can't because I can't connect to the network.

    2. I tried to reset the default network printer by pressing the wireless button and a button cancel for 5 seconds, it went through the motions and at the end of this, I tried step 1 again, still without password.

    3. I even printed the Network Configuration Page by pressing the black copy button and wireless at the same time hoping to find it somewhere a password... nothing.

    I'm confused and I need it solved very quickly. any help is appreciated, thanks in advance.

    Unfortunately no password yet. I have it connected to the router home as a last resort. Well, your security is really good, but I must add, factory reset should be an option in some way, it's unbearable.

    Then I finally found the solution, I downloaded the desktop software, because I lost the CD. Connected the printer to the home network, after a couple of tries, launched the desktop software and clicked on the EWS option. Phew! Finally, I'm here and safe to say, I will never allow new security (not something you want to your customers say huh?) Can you blame me?

  • HP3630 Deskjet: password Wifi live

    Pulling my outside hakim, that remains!

    Direct WiFi password is not on the direct guide Wi - Fi, the status of the printer or print a page the info on

    Hi, I bought an ebtry level printer soe it doesn't have the fancy LCD. I; ve printed documents. Nowhere can I find the password.

    On the Sataus printer report, he said: Admin password is not defined. If I leval the empty password nothing happens.

    Print you the Config network as worksheet indicates the User Guide?  Should be here.  Page 74 of the manual.

    To print the wireless network test report and the Network Setup page
    Press the Wireless () button and the Info button () at the same time.

    ● the wireless network test report displays the results of diagnosis for the State of the wireless network.
    strength of the wireless signal, detected networks and more.
    ● network shows the State of the network configuration page, host name, network name, and more.

  • [Q] WiFi live in JB Ideapad K1?

    I just tried krook1 for K1 CM10. It's great! Thanks for the effort!

    A quick question: I don't see the WiFi Direct option in the framework. -What is that supposed to be native in ICS or JB? This feature is available in K1 to JB?

    Thank you!

    amigd23 wrote:
    Thank you! I don't use anyway.
    Another question: the gallery app in cm10 seems unable to access facebook or mediasever as my HTC amaze 4 gallery app (ICS version). How can I get this ability? Thank you!

    None of these possibilities exist in the standard Google/Android gallery app (even if it has Picasa integration), so that you must have a custom gallery app that comes on your HTC platform.  You will have to do some looking around on Google for Gallery game other apps.

  • can not find printer wifi live android

    HP 3510

    Samsung s galaxy III running android

    You should be able to use the HP and Biz application that banhien suggested without problem with WiFi Direct. You should make sure that your phone is connected to the wireless network that broadcasts first the printer, but it should work. Hope that helps.

  • Apple TV gives up on WiFi association after awhile

    Hello

    I have the following scenario:

    -Apple TV model A1469, Version 7.2.1 (8011)

    -' Not always on' Wireless Network (ex, WiFi is turned off during certain periods)

    When I start the WiFi network and then Apple TV, it works very well, he associated with the network, no problem.

    Then I unplug the network WiFi, but Apple TV on. Apple TV unplug obviously WiFi.

    But after some time (it varies between 30 minutes to 6 hours, usually) when I turn the WiFi on once again, Apple TV connects to the WiFi network again. It is as if he has forgotten the network entirely and stays like that forever.

    I can recover by power off / turn on the Apple TV or by going to network settings and join the network again. A curious fact: Apple TV don't ask the password this time, then it means that the password is known.

    I have excluded from interference WiFi, electronic material nearby, the noise of the power supply, etc. So I need to figure out what to do next, because the Apple TV must be in conference of all time mode and the WiFi network must be down when not in use.

    It is a system completely unnatended, conference room users are not allowed to mess with power Apple TV and use the remote control either.

    Apple TV should always try to reconnect... why he gave up after a while?

    Thank you.

    You say that 'disconnect you the WiFi', but I think you mean that you stop at the router. ATV continuous attempts to connect, but gives up after a while. Having given up, it will not try again unless you interact with him, somehow. I suspect that it was designed for it. It is not surprising that he remembers the network key, because I think it behaves like an iPad or iPhone, saving the SSID and key networks, we saw previously.

    You can try to complain to Apple to http://www.apple.com/feedback/appletv.html , but I suspect that this requirement did not appear in the design. After all, ATV was really designed for home use, as attested by the apps 'watch television '. Schools and businesses find them useful, but is not the focus of the primary product.

    Why is it necessary to turn off the WiFi?

    You can use a wired connection for ATV? Assuming that your router supports wireless clients could still AirPlay on ATV.

    I was going to suggest that you turn the room Conference on ATV mode, but it looks like you have to do so already.

    It is a bit brutal, but could put you it off ATV (pull on the plug) before turning off WiFi? In this way, ATV never know that WiFi disappears.

    In addition, there are other reports of ATV apparently giving up network connections while you sleep, even when WiFi is available. These users will have to do the same thing you get ATV to pay attention to the network again. The funny thing is that this does not affect everyone. There may be an independent ATV adjustment that triggers this behavior. So you might expect a software fix or one of these other threads fly finally a solution. Just search here WiFi and sleep.

  • Office Jet 5740: connect 5740 in wifi directly to mac book pro IOS 10.11,3

    Printer connects to WiFi live - OE - 5740 Officejet5740 and prints but when on the internet via wif cannot access printer

    Fine, please mark my post as Solution accepted so other can find and solve their problem.

  • WiFi Direct | Bluetooth THE | NFC - Questions

    does not do anything with WiFi Direct even as a developer - only as a user for Miracast.

    have tested the sample application

    now have a few questions before I decide to use it

    Maybe someone can share some details

    ---

    WIFI DIRECT

    Is it possible after the first synchronization of time to connect without user interaction?

    If possible it is possible the app without a head?

    ....

    think of this workflow:

    environment:

    * Peripheral BB10

    * W Arduino THE BT / WIFI live support

    UseCase:

    User with BB10 device detects via THE BT as its is close to the Arduino

    BB10 App connects to the Arduino via WIFI Direct

    Data are transferred from Arduino to BB10 via WIFI Direct

    better would be if - after the first time synchronization is made - it could be done in the background

    (without head on BES10)

    If the background is not possible could also be executed if reduced

    most important:

    ANY intervention from the user to connect via THE BT and WIFI Direct

    If this cannot be done without - is it possible to be done using NFC tags?

    ----

    more details on the usecase:

    (a) a truck driver already running BB10 business app for managing work orders

    (b) inside of the truck, there is an Arduino by CAN - bus of tracking data and Mongo DB collection

    Truck driver going in and out of the truck and if there inside the truck collected data should be transferred to the BB10 device, then BB10 sends the CAN bus data to the server via MQTT if there is network coverage or later via WIFI in the office

    The great thing: customer didn't need additional SIM for CAN-bus-transfer of data, the BB10 device is already used for orders and sends data via REST to the server

    I modified the sample WiFiDirect-ion, so that half of the application that receives connections ran without head and it worked.  The one catch is that notification of the API is always displayed.  Here's a picture of what it looks like to my blog a WiFi direct connection mode that displays the command prompt.

    So you could do the Wi - Fi Direct connection from an application without a head without requiring the intervention of the user, but the dialog box is displayed.  But you can't have a WiFi connection to Direct a headless application without the user accepts the connection (see this screenshot of the same blog).

    So for your case, it should work since you could do your application BlackBerry 10 connection to the Arduino.

  • is there a calendar/Agenda/personal finance for ubuntu application that syncs with my 2nd ace jelly bean 4.1 galaxy?

    an application that synchronizes with Android, mozilla or Ubuntu, and have remote access. My wife lives in 2 hours of road, so she can see my date and the family budget, status, and vice versa. is there such a beast?

    Well, you can use Google Calendar as a calendar. Just share with your wife, download the app on your android Google game shop, maybe there's an app for Ubuntu? Then just to bookmark in Firefox and TA - DAH! You have a synchronized calendar!

  • Compact Z5 notification problem with coverage of Style SCR44

    Hello

    I'm having a problem with my new phone compact xperia Z5 and cover it in Style SCR44.

    In fact I transferred messages of my Xperia SP in my Z5C with Xperia mobile transfer Wifi live.

    It has worked well.

    But after that, I noticed that I had 4 unread messages when I close my cover.

    Screen within 2 to illustrate my problem.

    The classic first unlock screen:

    As you can see, there are no unread messages.

    Now the screen Style cover:

    Here, I have 4 messages received, but no message in the app :/

    I tried a few solutions, as clear data for the widget to cover, remove the protective filter style and he add, delete all messages, change my default application instead of meeting and check if I had unread messages, etc.

    None of them have worked.

    Can someone help me please?

    Thank you in advance.

    PS: Sorry for my English I'm a French guy

    I tried what you say, bot no way, messages was still there!
    So I did a reset, and they disappeared!

    It is excessive, but at least it worked.

    Thanks for your help alexdon

  • HP DeskJet 3632: deskjet 3632

    Hello

    I am trying to print directly from my iPhone 4S for HP DeskJet 3632.

    My wife (who also owns an iPhone 4S) has no trouble printing via Wi - Fi Direct. She was able to connect to the printer. As far as I know, she got somehow the PIN to join the network printer and bingo! no problem, print directly on it, but she has no record of the AXIS, she used and I can't access it as part of a Wi - Fi connection on his iPhone.

    Network printer appears on my iPhone without a problem. But I know not how/where to find the PIN for me to join the network.

    I followed the advice in the various manuals and online - to print a particular page of the printer, which is supposed to contain the PIN code. But it just does not work, no PIN included anywhere on the sheet!

    Is it possible that the printer will only allow me (my wife) to put in place a device for Wi - Fi Direct printing?

    The printer only generate/print a unique PIN CODE during initial installation and does not allow subsequent devices installation/connection?

    All tips are greatly appreciated.

    Thank you very much

    Miles-e-batteries.

    Hello

    Press the information button to print a report of WiFi Direct, the information button is marked as an exclamation point.

    The printed report includes the password WiFi live.

    Kind regards

    Shlomi

  • Someone else has Apple Airplay jumping and drop outs when streaming music?  WiFi is not the problem, and there is nothing around the units of airtime to interference.  Impossible to listen to music.  Thanks for any advice.

    I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.  I have a unit of airtime plugged directly on my stereo receiver that feeds music throughout my house.  My WiFi connection is not the problem and there is nothing to cause interference.  Airplay modules are not more than 15 feet distance modem or range Extenders.  Someone else has this problem and, hopefully, a solution?   I'm tired of doing factory reset all the time.  Many thanks for any advice.

    I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.

    By "Airplays" what are you actually refers to... Base station airPort Express, Apple TV, or something else?

    ... and "V1 to V2" do you mean you replaced a 1st generation 802.11n AirPort Express with a 2nd generation?

    Airplay modules are not more than 15 feet distance modem or range Extenders.

    When steaming audio with AirPlay, the flow goes first to the device host to iTunes to the router Wi - Fi, this unit is connected to. From there, he will travel to the AirPlay "speaker". A president could be an AirPort Express, Apple TV or an AirPlay device ready another manufacturer. If you use line extensions, the flow must go through those as well... so there is potential bottlenecks between the host and the speaker. One of these could be the cause of the issue you found.

  • My wife has pictureson her user page, I have pictures on the userpage of mine, how can we share all of our photos on the same live Webcam computer.windows photo gallery has all our photos,.

    My wife and I share the same computer. We have pictures in the windows live gallery, she have a user page, user page.but Ihave we cannot share our photos. Need help 2 unite photos.

    Hey Yusuf Jamal,

    ·         What is the original location of the photos?

    ·         What the operating system is installed on your computer?

    You can copy pictures to the public to share between users folder.

    Share files via public folders

    http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

     

    Sharing files with the Public folder

    http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

    I hope this helps.

  • My wife is more able to access their Windows Live Hotmail account. She said that ID Windows Live ID is incorrect.

    My wife has a hotmail account that she has actively used for years. In recent days, she can't access her e-mail to * address email is removed from the privacy *. Trying to connect gives a message "The Windows Live ID is incorrect" and it cannot reset his password because it receives the same message when she tries to reset the account. What can do?

    original title: The Windows Live ID is incorrect.

    View all Windows Live and Hotmail questions in the appropriate forum found here:
    http://windowslivehelp.com/

  • laptop usable as wifi for xbox live?

    im not sure exactly how to explain, but what im asking is if there is a way to use my laptop as a source for the wifi for my xbox to play xbox live

    the alternative is to buy the wifi adapter, but I want to make sure that im not paying $80 for something that I didn't even

    Hi GreekGuitarGuy,

    The best way to use your laptop WiFi to connect your Xbox to the internet is using connection sharing Internet (ICS). The following link gives step by step instructions how to set up your laptop and Xbox 360 with ICS:

    http://support.Xbox.com/support/en/us/NXE/xboxlive/getconnected/hcxl/consharing.aspx

    Since it is a forum of Windows, I would recommend trying to rely more on the forums found here Xbox: http://forums.xbox.com/.

    Hope this helps to answer your question!

    Cody C
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Ringtones since the upgrade issues

    Since the update iPhone 6s and later (Sierra for iMac) iMac and iOS10 for the iPhone 6 s, I lost all my ringtones bought/on measure.  I see them on my iMac in my iTunes under tones library, but they do not appear in contacts (iMac or iPhone), sounds,

  • Satellite Pro M30 and eSATA

    Hi all I recently bought the external drive western digital mybook premium ARE. This disc has an eSATA (external SATA) port. The problem is that my satellite pro m30 (model #: psm35e0021jar) is not the external SATA port. I found an ADDONICS (eSATA,

  • Version 5s 8.4 IOS or IOS 5 s 9

    What iphone is best used with IOS 8.4 5s or 5 s with IOS 9

  • My Turtle Beach PX24 micro does not work with my Y-50

    Hello, I bought PX24 turtle beaches, and I tried to make them work with my Lenovo Y50. The sound works perfectly well, there is absolutely nothing wrong for this, but when I try to use the microphone, it soley resumes on the internal mic and did nt d

  • Information on how to execute SQL on the CUCM himself queries please

    Hello all,. I need to run a SQL on the CUCM enumerate all directory numbers, their score and their external mask values. I came across this snippet below earlier so I have a bit of an idea of how do but iw would be great to see some other examples of