intermittent access WiFi hotspot

Similar Questions

• Cannot access the network using WiFi hotspot

  I have a lenovo ideapad z570 running windows 7 ultimate, processor intel pentium cpu B950 @2.10 GHZ 2 GB ram and 64-bit operating system. My problem is that when I create a wifi hotspot via intel my wifi technology, I so can not access the network on my android phone or the playstation 3. There is a sign yellow triangle on the wireless icon and I have the cursor on it, she reads, access to the internet network, unidentified network no internet access. I tried to update all the drivers, I even reinstalled the operating system after a wipe, same result. I tried to use programs such as connectify but same result. Please help me

  Original title: network
  

  There is a sign yellow triangle on the wireless icon and I have the cursor on it, she reads, access to the internet network, unidentified network no internet access. I tried to update all the drivers, I even reinstalled the operating system after a wipe, same result. I tried to use programs such as connectify but same result. Please help me

  Hello

  You try to use the Add-hock network so that you can access ac in android are as good as play station unit
  Like you would have checked in the id network properties material and device id, it yellow list means problem with driver, please try to update the BIOS and the driver appropriate with the hardware ID, if possible to install from the laptop power management

  IdeaPad Z570.please press fn + f5 and check the layout state of WIFI is turned on, current state should off
  Download these drivers and install it, then try again
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1WLN90WW5.exe

  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z370Z470/IN8STW09WW5.exe
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1MEI08WW5.exe
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1CHP30WW5.exe

• BlackBerry Smartphones unable to access Internet in WiFi hotspots such as Starbucks

  Ok.  I've scoured the forums here and almost everywhere possible on the net with over some luck to find an answer for almost a month.  I am currently on the cards by Fido. I bought a BB curve about a month ago because I was told that it has built in WiFi.

  I have no problem connecting to my wireless home network.  Weather, that I secure it or not secure.  I have no problem connecting to any open or secured wireless network.  When I have a problem is when I go to places like Starbucks where there a login screen.  So, I'm unable to connect at all.

  Search for networks, it finds the network.  I select the network.  Then, he said that it is connected.  So I'll try to go on the internet and it gives me just a blank white screen.  Now I find that my BlackBerry is just a useless paperweight because mainly I got to use in Starbucks coffee shops, since that is where I am much of the time.

  I tried to go to bell.ca and see if I could access it like this (as I read somewhere to try this), still no luck.  My question is, why would I be said that it has built in wifi, if it only works on some networks?  It is able to be used on networks that have a login screen or is not able to?  And there at - it something I am doing wrong?  It shows the name of bell's access point when it says connected.  And I made sure that I put it in wireless mode.  I had other devices (Palm Pilot) who had no problems to connect.  What is the built in wifi point if it does not work on all wifi networks?

  Ultimately what I want to know, is how to get my BlackBerry to bring up the pages of connection of these "hot spots"?  Weather in Starbucks, libraries, other cafés etc. ?

  I can't guarantee that it will work, but it is worth trying.  After you open your browser to connect to a wifi hotspot, press the BB Menu key and select Options and choose the Configuration of the browser.  Then, with the browser setting, try to set it to "Hotspot browser."

  Who help me?  Otherwise, let me know and I'll see if I can get my Storm2 to connect to Starbucks or other hotspot later today.

• HP Probook s 4540: create a Wifi hotspot using Internet cable

  I have HP Probook 4540 s running Windows 7 Ultimate 32 bit and 64 bit (separately).

  I tried many forums that explains how to turn on my laptop only with the help of internet cable in a wifi hotspot, but I failed... I always get error messages, so I came to the experts (manufacturers) to show me how it's done, and if it is even possible in my case using above specifications... Thank you

  The ultimate solution to transform the HP Probook 4540 s Win7-32 in a Wifi Hotspot of Wired internet by cable:

  In fact, the problem is in the Wlan/Lan Switching in BIOS option*.

  (1) make sure that your BIOS is up to date

  You can update here

  (Choose your OS and language, and then access the BIOS and pick up the most recent update)

  (2) find the BIOS Configurations when you turn on your laptop in the first black screen by pressing ESC

  3) access System Configurations

  (4) choose device Cofigurations

  (5) uncheck Wlan/Lan Switching

  (6) save changes

  (7) download HP Connection Manager (Latest Version)

  (8) install HP Cpnnection Manager

  (9) uninstall all applications WifiHotSpot

  (10) startup HP Connection Manager, under preferences, go to HP Mobile Hotspot

  (11) make sure that your internet cable is plugged in and that you have the internet connection

  (12) select (connection to the Local network) in the drop-down list next to the label [action]

  (13) click OK to RETURN to THE MAIN HP connection manager WINDOW, you will find (HP Mobile HostSpot), click on start and enjoy.

• How you connect an Xbox 360 console to an open Mesh Coova wifi hotspot?

  How you connect an Xbox 360 console to an open Mesh Coova wifi hotspot? You need to access a Web page to connect before any other Internet connection can occur? How do you do that on an Xbox 360?

  Hello

  I suggest you to contact the Coova Open Mesh support for more help with this problem.

  Here is the link: https://om.coova.net/forum/2

• WiFi hotspot

  I have a computer dell laptop vostro 1500 with windows xp. my internet service provider has installed a wireless router that provides wireless internet to a group of people here. He gave us a user name and password to access your accounts. I now want to be able to simeltaneously connect my windows phone and a laptop computer to wifi, but am unable to do so, as says my phone on my connection will be "user already connected" I do my laptop a wifi hotspot and then use my phone about it? If yes then please tell me step by step how to do this.

  A 'normal' home wifi network requires only a password; a user name is not necessary.  If the "hot spots" which has been implemented for you requires two, you should ask the person who set up how you can connect with multiple devices simultaneously.

  You can bring your own laptop at a wifi hotspot unless you have two wireless adapters installed in it (one to connect to the wireless router and the other for your phone to connect to).  And it is not clear if this configuration might work, or the proximity of two wireless adapters would cause interference with others.

• Impossible to put my laptop as wifi hotspot network

  Hello refugees,

  My laptop: HP G62 Notebook PC (purchased at Oman on 2010/10/10)

  Product number: WZ663EA #ABV

  OS: Windows 7 Home Basic - 64 bit

  Network card: Broadcom 4313 802.11 & Realtek PCIe FE Family Controller & Microsoft Virtual wifi Miniport adapt & Bluetooth (two) device

  The above details are on my laptop. My problem is unable to make my internet connection by cable to connect to a wifi hotspot to use in my SAMSUNG SIII mini. I show some videos to do this and I did the same, but I couldn't get the range in my laptop.

  the steps I did: opened my control panel network and selected the "connect to the Local network' and 'Wireless network connection' and do a right-click of the mouse and select"bridge connection. He came. Then I do a new «hoc Network» wireless connection then I gave it name as 'abs' of the network, and then select "Security Type" as "no authentication" then cliked ok. Now the netwok place showing my wireless "abs". and give courses as "pending for users. then I turn on my wifi in my laptop, but this 'abs' wireless appears. even, I'm trying to enter manually the address, then it also show that "abs" is "not in the range.

  My mobile wifi does not work normally. I try a few other networks, show and me can connect. same way my laptop computer wifi also works normally. I try to share my mobile net as wifi hotspot, its showing my laptop and connect it correctly. My only problem is that I am unable to share only the network from my laptop.

  Note: I read your few article which is about the same subject, he u mentioned that uninstall broadcom 802.11 it will install automatically after re-boot. I did the same rightnow. which is also automatically installed. After that I try but even failure.

  I opened my HP Recovery Manager and reinstalled wireless network told all. but still nothing.

  
  Here, I have attached my Place of network connection.

  This after I created the trigger guard.

  This time I have created the new network of the House of Commons as I said above "abs". but it does not appear in my laptop.

  As another step, I did as I show on the videos. 1 make my network to share the properties option and giving manual IP address in a wireless network to "Version of the Internet (TCP/IPv 4 4) Protocol. Then the same steps for 'abs', but same result failure.

  I know this great article to read, but I thought to explain briefly and I hope I did. So please friends help me through this.

  I'm sorry that you run in this parameter issue to the top of your hotspot. You said watching videos on how to set up the point on your phone (this one is for someone else who come to this thread). So now your screen attach / Portable Hotspot on your phone should look like this

  

  If it's not settings > additional settings > Tethering & Portable Hotspot > Swipe to turn it on

  Once you have Setup hotspot on your phone, you should not have to take special measures in the network and sharing Center. You have no need to configure any adhocs or something like that. You should be able to see your access point listed in the available networks list, just like you see your home listed wireless network. Then you click to select it and click the Connect button (see photo below).

  

• XP SP3 laptop computer connects to various WiFi hotspots but not to an individual.

  Just upgraded to Verizon MiFi 2200 MiFi 4620 the personal hotspot.  Our other Office XP SP3 computer, a Windows 7 laptop and Tablet Android ASUS everything automatically detected and entering the network key/password, all connected to the hotspot and the WWW.

  Fortunately, the XP SP3 laptop connects to other WiFi hotspots and will always connect to the MiFi 2200 old if it is powered even if, of course, he cannot access the WWW, because Verizon's network no longer recognizes the 2200 due service is transferred to the new 4620 MiFi.

  The XP SP3 laptop detects the new hotspot very well.  The command 'View available wireless networks' shows the new hotspot, but when 'Connect' is attempted he goes just in the cycle to appear in the connection, but returned eventually to view available wireless networks.  The 'Connect' button is available, implying that it would connect so click on new.

  Use the same settings (SSID, password, encryption, etc) for the device problem than others who work as they should.  It seems to be an incorrect setting or adjustment in the laptop but I can not understand that one.  I compared the services running on two XP machines and have found no obvious inadequacy.

  Advice?

  Thank you!

  When you say that the new device has the same encryption, do you mean that you know that both old and new devices use the same type of encryption (for example, WPA2, WPA, WPA-TKIP, etc.)?

  I noticed the following two statements in the Guide of the user for the MiFi 4620 L (page 30)

  • WPA/WPA2 Personal joint (safer, less compatible with older devices)
  • IMPORTANT you must use the profile secured with WPA/WPA2 Personal Mode security settings mixed when possible.

  Suggesting that the MiFi 4620 can by default that set... and that the hardware in your computer laptop problem is one of the 'old' devices that is not compatible with this setting.

  Just as an experiment, temporarily configure the MiFi to 'Open' (see pages 30 et seq.) and see if your laptop can connect.

• How to create a wifi Hotspot on your Window Vista?

  I surfed the Internet on how to create a Wifi Hotspot on Windows Vista Edition Home Premium, but nothing works...

  They show an option on the create an Ad-hoc connection after creating "activate Internet sharing, but all it by creating no option appears on the window."

  Hey

  Try these steps to create an access point in Windows Vista
  
  Step 1: Plug the Ethernet cable into one of the laptops.
  Step 2 - on the laptop you plugged in, press Windows Start button and open "Control Panel", go to "Network and Internet" and then go into "network and sharing Center."
  Step 3 - Choose "Set up a connection or network" and choose to create an ad - hoc network.
  Step 4: configure your network name and password WEP2 to protect.
  Step 5 - have the second search for laptop for wifi stations.
  Step 6 - ask them to choose the one with the name that you created, and enter the password you used.
  Step 7 - two laptops should now be able to use internet safely.

  Bravo!

• Z5 WiFi hotspot configuration password not accepted by my Tablet

  My Samsung Tablet does not accept the password of my new Z5 during the process of setting up WiFi hotspot.

  Tablet without problem with old phone used as access point.

  Z5 no problem connecting to WiFi at home.

  best regards and thank you

  Everything is ok now.

  The phone has decided to present the "Show password" box, which was not there before.

  Thank you for your patience.

  concerning

• WiFi Hotspot question!

  Hello

  I just got SO - 01 G Docomo Z3 Xperia.  This is already achieved the sim lock feature deactivation code.  So I can use it on the network Lte and 3G (Trinet Dtac) in Thailand.  Everything was fine until I turn on the WiFi Hotspot feature.  All devices (Sony Vaio PC and mini iPad 3) were connected to Z3 without problem.  But no activity on the internet was not working.  All devices are unable to browse the internet, facebook not connect, etc.

  So, I got a seroius looking at all aspects of management of telephone network.  I discovered the APN setting which could be visible at any time when you look at, you use cell phone networking or not.  However, when the WiFi Hotspot is activated, then the parameter APN was empty and all settings has been disable. All access points have been disappearing.  Then disable the WiFi Hotspot feature, any parameter in the page of the AFN were back as usual.

  I have concluded that it is the root of this problem.  But do not know how to fix it!
  Everyone here has found a solution to this issue, please help me.

  I thank in advance

  PS Adroid 4.4.4

  It is the right way to solve the problem with block WiFi Hotspot. This could be the problem with some Z3 with some some company like NTT Docomo, AU, Softbank or even three Mobile to the United Kingdom. This is not required at the root of your Z3.

  It can be a little difficult for the generation of people "point and click", since it involves with command line in Windows.

  Let's start:

  1. you need a PC with Win 7, 8 or 8.1 (not so sure on Xp). Also, having a Java runtime installed (www.java.com)

  2. Goto https://developer.android.com/sdk/index.html#top , then download Android SDK Tool Kit (no need full Adroid Studio Suite). Install it on your PC, if you haven't, yet.

  3. pay attention to where it installs to. normally it will be goto C:\\Program Files (x 86) \Android\Android-SDK\Platform-tools

  

  4. then take a look in his file for the adb.exe file. If it is not present, you install from Android SDK Manager like that figure. Check on Android SDK Platform-tools, checked on updates/news and installed then click on install. ?... package.

  

  5 Goto your Z3 if you still not enable developer option on your phone. GoTo > setting > about phone > tab on built number 7 times. Option developer goto check then the USB debugging.

  6 connect your phone to the PC using the USB cable wait until your PC displays connected Z3.

  7. Open command prompt on your PC. Then navigate to the C:\\Program Files (x 86) directory \Android\Android-SDK\Platform-outils.

  

  8. in the command prompt window, type" abd shell "and enter. Then what shell open, type the parameters" put global tether_dun_required 0 "then enter.

  9. wait until the complete command shell.

  10 disconnect you Z3 then put power off and power on.

  11. now you phone should perform a normal activity of WiFi Hotspot.

  CR. People in 'talk.sonymobile.com' and 'droidsans.com '.

• Not able to share internet connection for Win 7 wifi hotspot

  I created an ad - hoc wifi hotspot connection to help

  > netsh wlan set hostednetwork mode=allow ssid=WinWlHS key=MyPassword keyusage=persistent

  Then I started to use hotspot

  netsh wlan start hostednetwork
  
  

  I also have the mini port shared with Microsoft virtual WIFI intenet connection & is also show that it can access the Internet.

  

  When I connect to this hotspot network on my android device is connected but there is no internet (all the proxy settings have been supported). Anyone with some experience which can guide?

  Note: I work on my business machine, I'm behind a proxy, using windows 7 64 bit, 5.60 installed Sophose, using static Ip.

  Note : On my personal windows 7 PC the above steps properly.

  Hi Sunny Burmese,

  Thanks for posting your question in the Microsoft Community.

  I'm sorry to know that you are facing this problem.

  You use an ad - hoc Wi - Fi hotspot connection, your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  You can view this issue in Windows 7 IT Pro TechNet Forums networks: http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

  See you soon.

• BlackBerry smartphone WiFi HotSpot connection

  Dear BlackBerry community

  I had my BBTorch 9800 OS6 over a year now, which is a fantastic phone that complements any work that I do, that I use my phone as a modem.

  I find that sometimes I can have text, but it puts pressure on connection cards, when connected to the PC.

  I tried to find an app BB which contains a WiFi Hotspot, a connector where I don't have to put pressure of the components of my PC and phone BB.

  I understand the 9810 Torch carries this standard application, this application can be installed on the Torch 9800 but also found our BlackBerry App World.

  Any info on this subject will be much appreciated.

  Yours Sincerely

  JTV

  Hello

  Please see this KB:

  • KB31857 How to configure and manage a Mobile Hotspot connection

  (The access point feature is limited to 1) your carrier allowing these 2) with OS 7.1 on your BB. Access point is not one add-on app available through any means other than the meeting of these two eventualities.

  Good luck!

• wifi HotSpot does not not on windows 8

  I use connectify to create a wifi hotspot that I use my Android device. But a problem that internet access stops after a minute or two in my Android device. I have to restart connectify so that it works well again, but once again, I face the same problem in a minute or two.

  This isn't a problem with my camera because it runs correctly on other wifi networks.

  Any solution to this?

  Hello Wasim,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because the parameters or corrupt network drivers.

  I suggest you to perform troubleshooting network adapter and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'network card'.
  c. click 'Next' and follow the on-screen instructions.

  If this does not help, please use the steps described in this article and the Coachman.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How does a customer preform connected to an extensive WiFi hotspot using Ethernet?

  How does a customer preform connected to an extensive WiFi hotspot using Ethernet?

  It performs like any other wired device that is connected to an Ethernet port. However, in the case of a WAN, the unit that plugs into the Ethernet port on the extended base station will only get that fast of a signal that the connection between the "main" and "extended" base stations.

  In other words, if you use wireless to connect to the extended base station, there will be a loss of at least half of the potential speed wireless on the network.  A device that plugs into the Ethernet port on the extended base station will get this same speed.

  In order to maintain top speeds on the network, the main and extended base station must be connected together using wired Ethernet wired, permanent.