Intermittent connection problems migrate SIDHistory and new domain

Similar Questions

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.

• SEVERE intermittent connection problems

  My family had our router wireless WRT54GX2 for a little more than three years now without any problems. However, last June (between 13 June and 20 June) my family went on vacation for a week to return to an intermittent connection of our router. I'VE isolated the problem to the router and not the Modem, our ISP or cords. Practically from the start, our connection went out for about 10 seconds usually every 40 seconds to 2 minutes (with varying degrees of severity). However, as time has passed, the problem got MUCH worse, to the point where (for about the last six days) at the time where our computer restores a connection the connection would have gone again (the router by totally unnecessary). This problem has been going on with the two wired our (modem router to the computer) and wireless devices. I looked at the "answer" to this problem on the support site, but I can't at the entrance of my value such MTU recommended in this response because the connection turns off so many times, I am unable still load page maintenance based on a browser to the router. Help would be appreciated, I have an annoying, nagging suspicion that the problem is with the hardware itself.

  Thanks for the suggestion. However, before I read that, I contacted a Customer Service representative using the Live Chat option and two of them concluded that my router was defective and qualifies for replacement. Thanks to all who tried to help!

• Intermittent connection problems Atheros AR5BWB225 Wireless Network Adapter.

  Original titile: constantly restteing my Atheros AR5BWB225 wireless network card

  Hello, I just got a new computer, it is an Acer Aspire S3.  I have problems with stay connected to my network and having to reset the network adapter from one or two times a day at intervals of a few minutes.  There are two other laptops (HP and Toshiba) in my environment as more well-connected smartphones and ipad, but my computer is the only one having connectivity problems.  Any idea will help you.

  Hello

  1. have you updated any drivers, including drivers for network card?

  I suggest you perform the steps in the below link:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  http://support.Microsoft.com/kb/928152

  Also, check out the following links for more information:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information is useful.

• connection problems router WRT310N and wrt54gs * with DSL

  Until I can return to my apartment and after IPconfig etc. returns I wanted to see if anyone has had the following problem.

  I had a home wireless network set up with a wrt54gs v 5... I think it was BOM.

  A few days ago I tried to get the network key for the new smartphone and my roommate kind of stupidly locked myself and disconnected my phone then my Office Wireless adapted. passing through the standard power recycles and resets all him remains disconnected in the apartment as well.

  I have DSL through verizon, a toshiba satellite a135 with vista installed, all updates of drivers, and a westell 6100 dsl modem provided by my phone company.

  highlights include:

  (1) two nights now troubleshooting and browsing the forum. I have already exhausted simple corrections of linksys on his questions and help section.

  (2) new router, I wanted anyway a new and estimated that he was the problem. So I bought a wrt310N, hung, and he now obtained, there no longer updated set of firmware

  (3) internet connection is fine when I connect to my laptop directly to a dsl modem.

  router 4) implements the home network wireless very well, but with no internet connectivity

  (5) computer wired to the modem connects to the internet. wired computer for router modem does not connect to the internet. with two routers. If it connects not wired and wireless won't be better.

  I'm getting a little tired and tired, not to mention, I didn't my XBOX live fix to remove the stress of working in a military office all day lol

  everything seems to work until the router tries to connect to my dsl provider, at least as far as I can tell.

  and I'll be on the phone/forums with my ISP as well to make sure that I am not he mess up simply forgetting to fill in an optional field with info mandatory lol.

  so... help?

  still, when I go home for lunch I'll post information and specifications of real hardware if someone a little more savvy I know what to ask.

  Any ideas on where I'm wrong now?

  Fixed issue...

  in the end, it's a problem between the ISP's modem and the router that they helped me understand.

  My DSL service had changed their service, so TRP was no longer how they did the connections. Automatic DHCP was the current form. Following configurations of router DSL online provided inaccurate information. I didn't have the time to check with the ISP until yesterday afternoon when I was finally able to make a phone call and clarify things.

  We put the modem into bridge mode, checked some settings on the router, and then everything is back up now.

• Problems with firefox and new Seagate SSHD

  I recently installed a new Seagate 1 TB SSHD into my computer, it's the new generation of hard drives with built in 8 GB SSD cache. I cloned my old install and everything seemed to work ok

  I use firefox with Yahoo answers and regularly answering questions. If I answer a question and press on submit my answer is displayed correctly. If I then try to change my answer and press on submit again that my initial response is displayed and not my answer updated. If I change my answer once again the update response appears after one or two attempts. It seems that there is a problem with the way firefox and this new drive interact with each other.
  I uninstalled firefox and deleted all associated data files and made a new installation that actually no difference
  I am running version FF 26
  Windows 7 64 bit
  4 GB OF RAM
  AMD Athon x 2 64 6000 dual core

  The problem did not happen with my original hard drive, nor is it with Internet explorer or Chrome
  I have suggestions would be appreciated.

  David Gaguine

  Thanks, but my router does not have a cache and it does not explain why the problem started with the SSHD and is OK with a standard SATA drive.

  Clear the history after that outputs FF has not worked.

  I think I'll contact seagate support and see if they have similar reports or waiting for the firmware for the drive update

  David

  P.S. I have now to lower my head in shame, I discovered that the problem occurs on other machines, it must be something to do with my network or on the Yahoo site itself not FF or new hard drive happily.

  I apologize for wasting everyone's time

• Migration Manager and new iMac

  I bought a new iMac and want to transfer my old iMac on the new Migration Manager. The new iMac has Pages, Numbers and Keynote installed, but I don't have them on my old iMac. Migration Manager will overwrite these programs on the new iMac?

  N °

• Problems with Fuze + and new 32 GB Sandisk microSD card class 4. CAVEAT!

  I bought this card on Amazon.com and it was listed as a card MicroSDHC card SDSDQ - 032 G-A11M us retail package.

  This was announced as a class 2 card, but the card is labeled as a class 4 card and it's true that the write speed of this card on average 3.8 MB/sec.

  I have inserted in my rocket + and got the error that there is a file system error and to format the card in FAT32.  I formatted the card under Windows 7 times using a format formatting fast and Normal and tried to write on it and it works perfectly through the windows.

  I even did a full load test using H2Testw and he filled out the card and checked the files and it passes, so the map seems to work as expected.  In windows, in MSC mode, it works without problem.

  However, as soon as unplug you it from the computer the "rocket" does not recognize this.

  At first I thought that I had a card that is counterfeit, but doing some research forum revealed that Sandisk has been quietly replace existing map of class 2 with class 4 cards.  That's fine, but something happened because this card can not be read by the Fuze +.

  I have left a note with technical support and am about to do a live chat with the technicians there.  I hope they have a solution, or that the new firmware addresses this.

  This isn't a problem with the hardware or the card.  The card goes up and works perfectly under Windows so that inserted in the Fuze +, this seems to be a problem with the firmware as it will not mount this card.  I hope that Sandisk is a fix soon.  But for now I'm stuck.  I have a card that I can't come back because it is not bad for a player who did not recognize.

  Specifically, I bought the Sandisk card to go in my player Sansa because I thought they would have tested their own cards with their own products.  My disappointment is understandable.

  Any help anyone has would be great.

  Yes, they want to take a photo of the card and my phone is worse than mine.  I'll have to use camera for my daughter to get a good picture of the card.

  As I said, it seems that the map is read and write correctly.  I have same h2testw.exe rand on and filled the card and it passes.

  Weird stuff.

  Will be.

• BlackBerry software problems sync Z10 and new computer.

  My BB Z10 has many contacts, none of them in the «Local Contacts» account This is to avoid duplicates, I only have my contacts on the BB link account that I use to synchronize with my desktop Outlook. Now, I have replaced the computer and only have contacts on my device.

  When I tried to sync with my new computer, it is what is happening. BB link creates a new account link (named after my computer) BB for synchronization. And because there is nothing in this new account and nothing on the computer, no contacts Sync. Apparently the BB link synchronize another account, only local Contacts or the account that he created the first time that you sign in with your new computer.

  I tried to put a contact on the Group of local Contacts, and then Resync. This contact was Sync and placed on the computer (Outlook) and on a new account link my device BB.

  So I thought that I could just walk-around her by placing all my contacts in my group of local Contacts. I could not find a way to 'select all' and don't feel like using the function "selection much" click on my 900 contacts.

  Is there an easy way to solve this problem? Course, the ideal solution would be to synchronize the account I choose. I'm not sure that this is a reasonable request, however. So, I would be happy with the market "copy of local Contacts.

  Thank you very much!!

  Roney

  Unfortunately, there is no way that you can select all contacts with just a tap. You should choose the option "Select more" and to highlight the contacts one by one.

  Also he by design this Blackberry link will only synchronize the device data associated with the link BB for this computer account.

  That means, 1 BB PC link data on the device will not sync with 2 PCs.

• Problems of 500PX and new serial code for Adobe

  I just went through my renewal with 500 PX Awesome + Adobe but I didn't get the + Adobe. I wrote 500PX numerious times but without them answer me. Great user, subscription: 4526530. They say they will send a new activation code for Adobe, but the have not. Now they no longer meet my emails. What should do? Can I get the code series directly from Adobe?

  Cloud subscriptions do not use serial numbers, so I think you're talking about a redemption code

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  Given that you have purchased from a non direct seller of Adobe, I don't think that Adobe will give you any type of code

  But, since I don't work for Adobe, you can try the chat

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Connection problems with WUSB300N and E4200

  Hello

  I wonder if someone can help out me. I bought an E4200 router to replace my old WRT150N. I got a WUSB300N connected properly to the old router, but it does not connect to the E4200. I have a guest network set up on this subject, and the adapter can connect to it, so I am at a loss as to why it does not connect. Anyone think that has something to do with the type of security, I have set up? I had WPA2 on my WRT150N and E4200 WPA2/WPA mixed mode.

  The adapter is located on a desktop running Win XP.

  Thank you!

  Before suggest you troubleshooting steps, I have a few questions. As when you connect to a wireless network it appears an error message? Check as well the wireless settings on the router.

  [A] with the help of the Cisco Connect software (if at all, you have installed the router using this software)

  1] open the software and go to the option that says "settings of the router.

  [2] then click on the option that says 'Advanced settings', which will take you to the router configuration page.

  [3] then go to the wireless network mode tab keep as mixed,

  For 2.4 GHz string parameters, you can make the channel width to channel 6, 9, 11 and 20 MHz only...

  For the 5 GHz channel parameters, you can do channel width to 20 MHz only and channel 40 or 161...

  [B] If you have not installed Cisco connect then you can connect to the router's user interface using its default IP address in the browser which is 192.168.1.1 and enter "admin" as password empty username field. This will take to the web interface of the router and then follow the steps as indicated above to make the changes.

• Nook Color ereader &amp; connectivity problems with router WRT610N

  I recently bought a new Nook color ereader for my wife. As long as a network administrator, I thought that this would be an easy task to configure the ereader to connect with my Linksys WRT610N router on the 2.4 Ghz band. But I'm running problems when connecting. The question seems to have intermittent connection problems where the meals seem to see the wireless network, authenicates, tries to get an IP address, then connects for a short period or removes the signal very quickly while being right on top of the router with the device.

  By the recommendations of various forums of Nook, I had the best luck with the following...

  2.4 Ghz band settings

  SSID: NookNetwork

  Channel width: 20 GHZ

  Standard channel: 9

  SSID Broadcast: enabled

  Security mode: WPA2 Personal

  Encryption: AES

  Passphrase: set out

  Key renewal: 3600

  UPNP: disabled

  RTS: default

  Defragmentation: default

  Tag: default

  However, the problem still resides in an intermittent connection to the wireless network. I also tried various arrangements of the channel to both channels 1, 6 and 11 with my best cponnecting chance to channel 9. I also played with the security and disabled all together and have plugged but always file (will not however run the unsecured network). Also try a tag value of 75, a framework of fragmentation of 2306 and 2307 RTS setting. My computer laptop while run and connect properly.

  I use the latest software updated both on the color of the corner. I am at the end and have searched high and low to get suggestions, and have not yet reached a compatible connection. Please help... Thank you! And my wife thank you in advance! Smiles!

  Mike

  Hi death,

  Thanks again for your comments and your concerns. Really appreciated!

  I took your advice and contacted Barnes & Noble for a new replacement and am waiting for the reception of the new unit as I type. If all goes well, we have reduced the problem and the replacement ends at our misfortunes... smiles!

  I'll let you know...

  Mike

• HP Photosmart C6180: hp photosmart c 6180 turns off when it is connected to the network and blinks green photo

  When my Photosmart C6180 is related to two wireless and ethernet network after any number of hours it stops itself down and the green light on the front panel by the icon of camera flashes.  You will then have to push the power button to turn back.  Not very practical for a network printer. Router is a Linksys WRT 1900 ACS.

  Hi wjabdella,

  Thank you for your answer!

  In the post I provided on the hard reset, he mentioned: sometimes, when plugged into a surge protector or battery backup, the quantity of electricity is not received by the printer.  Power problems can cause printing problems.  It is particularly important to be plugged directly into a wall outlet with wireless connectivity problems, "sleep mode" and other power problems.

  So by unplugging the power and waiting, it resets the printer almost to its original state without making a complete factory reset and lose any other information.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope that answers your question!

• Some virtual machines have intermittent network connectivity problems and rest work correctly.

  Some virtual machines have intermittent network connectivity problems and rest work correctly. The VMs are in the same group of port and on a 4-node cluster. Physical network interface cards are appearing in vsphere client

  Please confirm if the issue has been resolved after you complete the steps.

• I transferred information and software with the migration wizard and CC no longer works. I get the following message: Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged. Please download and install a new copy of the

  I tried to use the new user, the uninstall program does not work either so I deleted all software, mac rebootet, disconnected from the old computer, but nothing seems to change the problem. My old computer is iMac and new Mac Pro.

  do not use migration assistant.

  uninstall all cc Adobe installed to use it.  cleaning by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 then install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe

  Use the cc desktop app to install your adobe programs.