Intermittent freezing of the computer when opening programs
Hello. I have intermittent freezing problems which I will try to describe. About 5 to 7 times a week I click on a link like Comcast Mail Office.
The 'think' rotation slider will begin, the page does not load and then a message appears after a minute or two for example 'Windows cannot find Comcast.net' the only way I was able to solve this problem is to restart with the power-it button does not restart by using the standard method. I pretty much can do nothing until I restarted and then the computer works well. Comcast has tested the modem and the connection and says it's ok.
The issue occurs at random times. It happens more frequently when I begin a session, but it froze several times while I'm running an application or are already on the internet. I performed the tests in the pc tools and things seem ok. I have 3 GB of ram and a measure of consumption on my desk that indicates normal operation.
Any thoughts would be appreciated. It is far from aggravating and barely embarrassing, but I would like to know the cause.
Hi Kenny, Please see the following thread (even if it is a different issue, some of the troubleshooting steps are the same): Tags: Windows Sounds of the computer when a program opens or closes Without my OK, my computer automatically downloaded Windows 10. I brought my fix it shop to get Windows 7 on. When this was done, I found that none of my sounds play when a program opens or closes except when my email finishes loading and are ready for viewing. The fix in this catalogue could not understand why this happened and are always looking for a solution to this issue. Any ideas? Back to default sounds: Control Panel, hardware and sound, change system sounds Audio driver may need to be installed/re-installed. Go to the OEM support page and download the driver. Eventually, it installed the wrong driver. Restart the computer when a program does not Hello I'm using Labview 2011 and 2014. I put windows to start my program when the computer is turned on. The VI is set so that the program runs at the launch. Things have been works well for many ON / OFF sequences of the computer. But the last time when, coming back to the screen, I realized that the program did not work (as if she was waiting for the user based on the white arrow). I pressed the white arrow and the program worked fine. I started the computer and everything worked too. This program is supposed to run far enough away from work where I don't have access to the computer (not able to check if things are okay..) My question is: how could I make the computer do a sequence of Stop and Start if my program stops or is not running? Thank you. User Given that it looks like your application simply stopped normally, I would add in an Exec System call to reset your computer. Is the command that you want to restart the computer Computer keep blocking low esp when opening programs such as quick books. Computer keep blocking low esp when opening programs such as quick books. Get the massage "explorer.exe - application error instruction at Ox79c30060 memory could not be read" then get a 2nd window that says 'stop triggered by NT Authority\system. (RPC) services taken RPC end."then stops and samekh. Can you give me the suggestion. Hi Vpro1, Thanks for posting. First check with the OEM of your computer ram or motheboard to see if there are diagnostic tools that are available to the general public equipment for you test your equipment with. In addition, get with your OEM motherboard / computer to retrieve the steps on how to update your BIOS and drivers. Once you have done this uninstall and reinstall the program, you have problems with. I hope this helps! Shawn - Support Engineer - MCP, MCDST computer will automatically connect to IE start up how can I stop this. When I would use the computer and open IE when I'm ready to use it. I have a ZYXEL router. This has happened only since I checked a pop box that says connect automatically very stupid, I know, but now can not cancel. help please Hi Tansy, Thanks for posting your query in Microsoft Community. I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue. I understand that you want to disable the open Internet Explorer at startup option. Method 1 Startup options (including safe mode) Step 2: If the problem is solved in SafeMode with networking, then I suggest to perform clean boot and remove the program that is causing the problem. How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8 Method 2 Microsoft safety scanner
Note: See also: Stop a program from running automatically when Windows starts Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you Win Vista error when the computer is open I've been surfing this site looking for an answer of the following error messages when I open the computer Application: open them all at the same time. 1 could not start the dispatch table, win vista error 2-cannot create TransportManagerServ: create 3 - the third is a dialog box with the title: error SDMan WinMain. It says: an instance already exists! -OK Can someone give me a hand? Thank you Click Start This will check for any breach of integrity Restart your system Also, try the following: 1. click on start, type msconfig in the search box and press ENTER. Andre Da Costa http://adacosta.spaces.live.com | http://www.ActiveWin.com | Microsoft MVP Effectiveness of password computer when the computer is open The computer access password act as a block, restrict or prevent access to the computer by unwelcome intruders, when the computer is open? D I'm Kaye When you put the password on your computer only people who know the password can log into the account protected by password. When your computer is started, or is in sleep or lock, when you try to access it, it will ask for the password. However, when you already login in your PC and if you just leave your PC, other people could access while you are connected but you can either lock the PC when leave you or stop or turn sleep mode. You can also change the setting in a way to browse automatically sleep mode or even display the server if you do not use your PC after a period (e.g. 15 minutes) and when someone tries to access the PC, he or she will need to enter password. For better security, it is also recommended to protect your system with bitlocker, for protection (if the version of your Windows supports this feature): http://Windows.Microsoft.com/en-us/Windows7/products/features/BitLocker I can't transfer files flv to mobile star Samsung Galaxy of the computer, when I tried to transfer the file, showing a dialog box indicates that the file is opened in the Media Foundation Pipeline. Exe Discussions were merged. Deleted duplicate. Hello Arun, Thanks for posting back. If you have successfully transferred your files and they are stored in a location on the hard disk, that is, in a folder or drive on your computer, they will remain on your computer, regardless of any number of reboots. Hope this information is useful. If the problem persists, please post back for assistance. does not and the freezing of the computer... My computer keeps freezing. It will be the circle of hour glass thing and is the only way I can get the computer to turn off by holding the power button down. It will freeze and the computer screen turns white and everything's going to say (not answer). What should I do? Hello What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER ---------------------------------------------------- Follow these steps: Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN Enter this at the command prompt - sfc/scannow How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program Also run CheckDisk, so we cannot exclude as much as possible of the corruption. How to run the check disk at startup in Vista ========================================== After the foregoing: How to troubleshoot a problem by performing a clean boot in Windows Vista Optimize the performance of Microsoft Windows Vista How to check and change Vista startup programs A quick check to see that load method 2 is - using MSCONFIG then put a list of Tools that should help you: Process Explorer - free - find out which files, key of registry and other objects processes have opened. Autoruns - free - see what programs are configured to start automatically when you start your system There are many excellent free tools from Sysinternals -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
There are many excellent free tools to NirSoft Window Watcher - free - do you know what is running on your computer? Maybe not. The window
Many excellent free tools and an excellent newsletter at Karenware =========================================== Vista and Windows 7 updated drivers love then here's how update the most important. This is my generic how updates of appropriate driver: This utility, it is easy see which versions are loaded: -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after Always check in the Device Manager - drivers tab to be sure the version you actually install Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually. How to install a device driver in Vista Device Manager If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows How to disable automatic driver Installation in Windows Vista - drivers
=========================================== Refer to these discussions because many more excellent advice however don't forget to check your antivirus Performance and Maintenance Tips Explorer Windows stopped working Hope these helps. Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. My Macbook Air uses El Capitan 10.11.5. This operating system repeatedly freezes and the computer must be turned on / repeatedly. How to solve this problem? Hello Check if the hard disk needs repair. Open the disk utility, located app in HD > Applications > utilities Select Macintosh HD on the left then click the first aid tab, and then click Run. After the upgrade, I want the computer to open to strictly Windows 7. I get a page asking if I want to Windows 7 or an earlier version. There also all programs on the file for XP that I didn't need since the upgrade, I transferred all my documents, files, etc.: on my removable hard drive. How I can do all this extra to elimintate bits of information and make it turn on the computer faster and more accurate? Upgrade to Win7 has nothing to do with the Windows Update feature. Please repost your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft IOS 10.0.1 and 12.5.1 to Windows 7 iTunes, the iPhone no longer appears as a device on the computer when I plug it, even if it syncs very well. That's how I used to synchronize and access my photos from my phone to my PC. * Is there a way to make the phone reappear? * Is there a different way recommended to synchronize the pictures from the phone directly to a PC? I don't want to use iCloud. Thank you! ITunes still recognizes your iPhone? If not, try to follow this link: If iTunes does not your iPad, iPhone or iPod - Apple Support or you can also contact apple support contact Apple for support and service - Apple charge for assistance Original title: computer viruses. If I have a virus and I restore my computer, the virus will come back to the computer when the files are restored. Hello to be Safe side scan always media files are on before you reinstall your data using drives flash etc is a well known to transfer viruses, etc. Restart the computer when attempting to open large JPEG created by Lightroom Hello, I'm trying to export an image to make a wrapped canvas. On the export screen, I select 36 x 24 "at 300 dpi, jpg, sRGB. Lightroom exports in my folder. However, when I try to open the file, the computer restarts. Material of my iMac should not be a problem and has never been. I tried this with other files and it does the same thing (so I know this isn't a corrupted file. In addition, I can export more smaller sizes and tiff without problem. I ran diagnostics and contacted apple. He confirmed that it is probably a problem of LR. Someone at - it a wisdom? Thank you, the customer waits patiently. stephens85583839 wrote: This is probably the cause of your problem: Can not see quick launch taskbar at the bottom when a program is open I have Windows Vista. I used to be able to see the task bar for quick launch at the bottom of every program that I had opened, but now I see it by looking at the office. How to see the quick launch task bar again? Try this: I don't know if this goes in the tabs section or the section modules, so I placed it here in tabs. I label mix more and that's what happened to me recently: I just started firefox; He asked me to restore the tabs and I said 'yes', but all tabs are em Hey there, just got this camera for a few days and im having an issue. Is there some kind of sleep mode this camery? PS: you can add a feature 'show' on the distance as well, its mostly being used to activate or deactivate records anyway and the fact Tecra A2: brightness F6 Fn + F7 does not work after updating the BIOS of the screen Update bios to 1.40 VICTORY at end of January. Since the failure of keys F6 & F7 then to increase or decrease the brightness of the screen. Is it a coincidence or is that updating the bios the culprit! ?? How can I reduce file install windows 64 GB? I have 64 GB of information in the folder C:/windows/installer. Is it possible to delete these files in this folder? What is the best processor for my Vostro 1510? Hello! I want to upgrade the processor of my Vostro 1510, willing now to an Intel Core 2 Duo T5670 (1.8 GHz). I would like to know what is the best processor for this laptop, can you tell me? (I don't know the exact model of motherboard) In addition,Similar Questions
shutdown /r /t 0
Steve
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Step 1: I suggest to start the computer in safe mode with network and check if the problem persists.
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
http://support.Microsoft.com/kb/929135
Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.
I suggest you run virus scan online by using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
http://Windows.Microsoft.com/en-in/Windows7/stop-a-program-from-running-automatically-when-Windows-starts
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannow
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html
those here.
--------------------------------------------------------------------
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.html
http://www.NirSoft.NET/utils/index.html
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.asp
http://www.KarenWare.com/
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.
with their own software and drivers and all other main drivers that you have.
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)
each installation.
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.
manually by model.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3
Right click on an empty space in the task bar, click on 'Properties', the "taskbar and Start Menu Properties", tab "Task bar", check the box before "Dungeon of the taskbar above other windows. Click on the button 'Apply' and 'OK '.Maybe you are looking for