Intermittent problem with IP addresses and internet connections dropped

Similar Questions

• Problems with Win 7: lost internet connection and downloads

  Hello

  I'm not sure that the two problems are related... I don't know what topic to choose.

  I have a custom, with Win 7 machine, and I install all required updates. But for a while (months? I turn it off every night) it says 15 updates are available every time that I reboot, and I see no updates installed (I search for installed updates today).

  Anyway, let them go all the way, and when I restart, I have no connection. It's happened several times (everytime I reboot). Maybe that I had the chance to solve the problem by restarting (and reinstalling :)) 15 updates, but today I can't. I am connected by wire to a modem. Our all other computers work.

  I have a job in the process and need my internet connection (easier to work on a desktop computer with large screen of a laptop) and I can't.

  In network and sharing Center, there is a cross between 'Several networks' and the internet. I have the message if I 'connect or disconnect' "no Internet access.

  I did ipconfig, and I get media disconnected. I did not unplug anything!

  I would be very grateful for your help.

  Thank you very much

  Hi Allwyna,

  Thanks for the reply.

  As you said, there are 16 updates that never completed the installation. There could be opportunities updates are at the origin of the problem. So before solve us the connection problem. We should go ahead and first to solve the problem of updates.

  I would like to know you have installed any Security Antivirus software on your computer, if so I first suggest you temporarily disable the Antivirus software install on your computer and check if that helps.

  Warning: Antivirus software helps protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you have to temporarily disable it to install other software and/or any relevant issue, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks by malicious software.

  Try the methods.

  Method 1:

  I suggest following the steps listed in the article and check if it works.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Method 2:

  I suggest you to manually reset windows update components.

  http://support.Microsoft.com/en-us/KB/971058

  NOTE: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps. Please let us know the results. We will be happy to help you further.

   

• Windows 7 - updated interfere with anti-virus and Internet connection

  Windows updates frequently stop my internet connection. It's using windows7 with a wireless router and a cable modem broadband. Updates have also stopped my work (Norton) security protection. What can I do to stop what is happening or is it Microsoft?

  Hello

  1. when exactly it happens? After you install a particular update?
  2. this happens whenever you install a windows update?
  3. the updates you are trying to install? http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Step 1: You can try to install the windows updates in the clean boot state and check what is happening.

  Put your boot system helps determine if third-party applications or startup items are causing the problem.

  Try the steps in step 1 in the article to put your computer in clean boot mode.

  http://support.Microsoft.com/kb/929135

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:
  a. click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Current problems with windows xp and Internet Explorer e-mail. You want advice

  Problem started when in Internet explorer, I could not send emails. Program would close downm advised by the technical support of Microsoft Windows than windows xp or explore 8 had bad files and needed to do a clean install. Cannot locate the disc for windows xp will have to buy a.  Should I buy Windows XP or Windows 7? What are the main differences > is Windows 7 contains IE and other software as well?

  The tech shared my office and tried to uninstall IE 7 and 8 butcould not completely uninstall. It also reset my settings to the origianl settings, still no luck. The messaging service is hotmail and my wife also has a msn.com address, and none of us can email unless I have disable all add-ons. How can I solve this problem? How can I find out who the module blocked sending emails?

  Well, again, how take you your contact with the tech support person?  In other words, how do you know he worked for Microsoft?

  What default values have been reset?

  What happens when you try to use Hotmail or MSN?

  * It was an attempt to uninstall IE 8 which has failed.  How it failed? Do you remember any error message?

  * Apparently, the attempt to uninstall IE 8 was successful enough to reveal IE 7.  Then, there was an attempt to uninstall IE 7 that has failed. How it failed? Do you remember any error message?

  * What version of IE is now active?

  Assuming that the answer to the previous question is IE 8, you can selectively disable the modules by going to tools > manage add-ons.  If IE 8 running in mode no. Add on solves the problem, I suggest from IE 8 in normal mode and systematically disabling the modules until you find the culprit.

  Alternatively, you can start a new thread in the forum Internet Explorer .  Include your version of Windows XP, including the service pack and the version of Internet Explorer you are using.  You should also explain exactly what is happening when you try to send an email.  If an error message appears, he quotes completely, without paraphrasing.  I suggest that you use a more descriptive title, such as "cannot use Hotmail with IE 8.  In the body, do not forget to explainwhy "do not use Hotmail."

  Yet an another path is to ask for help for Hotmail here: http://windowslivehelp.com/product.aspx?productid=1

• Problem with Safe Mode, no internet connection

  Whenever I start in safe mode with networking, I can never connect.

  Hello

  Please answer these questions so that we can better understand the issue.

  1. are you able to connect to the internet when the computer starts normally?

  2. is it a cable or a wireless connection?

  3. is there something specific that you are trying to do it in safe mode?

  Please try the troubleshooting on this article and check if it solves the problem.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know if it helps or if you need further assistance.

• Problem with plugin Select2 and Internet Explorer v8

  Version 4.1.1.00.23

  Hello

  I'm having a problem with the plug-in Select2 and Internet Explorer.

  Field placement is not aligned and the bottom of the fall are not displayed and the browser to hang appers.

  I had a problem trying to anchor a new version of JQuery that Tom Petus help me solve it by adding:

  #HEAD #.

  < script src = "" #APP_IMAGES #jquery - 1.7.2.js "type =" text/javascript"> < / script >"

  "< script src="#IMAGE_PREFIX#libraries/jquery-ui/1.8.14/ui/jquery-ui.js ".

  This is for the page template.

  The screen in IE looks like this: [IMG] http://I61.Tinypic.com/2s0z2mg.jpg [line]

  Can someone help me?

  What other information can I give?

  Thank you

  Joe

  Nick,

  In IE11 turn off "Compatibility Mode for Intranet sites" fixed the problem, but it did not fix it in IE8. The behavior is always the same, as shown in the screenshot. I'll try to talk to my manager to see how upgrade them to IE11 if they want to use IE for this application instead of Firefox or Chrome.  In the case they enhance any idea what to look for in IE8?

  Thank you

  Joe

• Dell PC with Vista having problems with the mouse and the connection to the internet

  I had this departure abt 3 weeks ago - my mouse don't come... I had this pc for abt 2 1/2 years - has had to the technicians on the check abt a year ago - what I take again at a tech or have I not a bad pc?

  * original title - my Dell pc does not connect to the internet without turning off & on several times? *

  Hello

  ·         What security software do you use?

  ·         You receive error message?

  ·         You made changes to your computer recently?

  Method 1

  You can check out the link below and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2

  If you were able to connect in safe mode without any problem, you can try to perform a clean boot to verify if if no third party service does not cause this problem. See this Microsoft article.

  http://support.Microsoft.com/kb/929135

  Concerning

• Problem with Web Builder and MySQL connection

  Hello

  I created a web service VI (see picture attached) to connect my Web Builder application with a MySQL database. The problem is that I get nothing on my exit signs during the call to the web service VI.

  Some tests I've done:

  (1) this web service VI works perfectly (I mean indicators 'value', 'status' and 'data_hora' give the desired result) when the VI run directly through LabVIEW. MySQL connection and my VI are OK...

  (2) I know my web service VI was successfully built and deployed because the indicators give me some value if I sign something for them other than my SQL output

  (for example: if I put a string constant "Hello" on indicator "valor" I get "Hello" when calling the web service VI)

  I suppose that the database connectivity kit is not supported when a VI is integrated with a web service VI. In my case, kit screws are inside the subVIs 'start', 'exec 2d' and 'stop' showed in the picture as an attachment.

  Any idea?

  Thank you

  Marcelo

  

  I'm using LabVIEW 2001 Wesley, but I solved my problem.

  It was just a MySQL data source problem: I just had to add my info DB through C:\Windows\SysWOW64\odbcad32.exe.

  Thank you

  Marcelo

• PROBLEMS WITH THE UPDATES AND INTERNET

  WHENEVER MY COMPUTER DID AN UPDATE AFTER THE UPDATE I CAN'T GO ON THE INTERNET, I HAVE TO RESTORE TO A TIME BEFORE THE UPDATE, ALSO WHEN I TRIED TO DOWNLOAD JAVA AND FLASH, IT WOULDN'T LET ME ON THE INTERNET, NONE OF THE TWO, I HAVE A LAPTOP TOSHIBA SATELITE MAYBE 2 MONTHS OLD CAN HELP ME A FEW

  Hello Felixtorres,

  Method 1:
  (1) try to upgrade your copy of Internet Explorer to version 7.0
  (2) restart your computer
  (3) visit http://update.microsoft.com and install updates of missing security for IE7 & stop and try again.

  Method2:
  There might be some important vista .dll are gone corrupt. Please perform the below steps to solve problems.

  (1) make sure that your account is to have any of course rights or grant your account level "Administrator" rights
  (2) from the command prompt, run the command " sfc/scannow " & provide the Vista installation DVD.
  (3) analyze your system with antivirus & Spyware software to remove infected files.

  Also, visit him following MS KB links advanced troubleshooting.
  http://support.Microsoft.com/kb/947821
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;928228

  -

• Problems with Dreamweaver CS4, and Internet Explorer 8?

  I'm on iMac with a site Dreamweaver CS4 that most browsers recognize and show, except the new Internet Explorer 8.

  It loads the index page, but all it shows is "FINISHED" or a blank page.

  Is anyoone knows why this is? As a Mac user, I can't Internet Explorer 8, and when I check "compatibility of Internet browser, all the he shaows, it's a single line has"expanded boxes""

  It's a battle of Microsoft/Mac?

  Please provide a lik on the site.

  There is no way we can comment without one.

• A Wi - Fi connection does not have an IP address and cannot connect to Internet

  Here's my question:

  "Wi - Fi doesn't have an IP address and cannot connect to Internet"

  But he connects.  I use the model of airport Time Capsule ME182LL/A and the last OS.

  The reason why I suspect the problem is that my Samsung smart TV will not connect to internet, but connects to the WiFi.

  Do I have a problem when the network preferences indicates my network with a point orange and says 'No IP Address'?  It doesn't have a green dot next to the Wi - Fi connection and it says connected.  I'm puzzled.

  Thanks for any idea that you can provide.

  Something wrong with the Setup program.

  After the airport utility screenshots of the configuration of TC.

  In particular this modem do you have? Actual spending brand and model please.

  Who is your ISP?

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• Windows store error "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  Original title: Windows 8 store does not.

  Whenever I try to open the windows store, I get the message: "we could not connect to the Bank. This can occur because of a problem with the server or the connection may have expired. Please wait a few minutes and try again. »

  This happens constantly, and because of that I have not been able to upgrade to Windows 8.1.

  Hello

  This behavior can occur if the antivirus application blocking the app Store or changes due to some recent on the computer.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Make sure that your PC is up to date

  Make sure that updates are installed on your PC and that your antivirus program does not prevent the application from running. For more information about installing updates for your PC, see Windows Update: frequently asked questions.

  Method 2:

  Run 'Windows Apps Store' convenience store

  You must be logged in as an administrator in order to run the "Windows Store Apps" troubleshooter. This tool can automatically find and fix some issues with applications. It is available in English only, but will work in all languages. You can let automatically try to fix any problems found, or select what you want made repairs.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 3:

  I suggest you delete the Windows Store cache and check how it works.

  1. Press Windows + R logo
  2. Type wsreset.exe in the run window, and then press ENTER.

  Method 4:

  Define the Apps approved in third program Antivirus- If you have a third party AV program installed, check its settings to make sure that the app Store works is not changed to be approved. If the AV program has the app as unreliable, it will block and prevent opening the app.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I just had a software problem with my Mac. and had to reload everything with Apple. Only one problem. Lightroom is gone. Apple said that the address has changed. How can I get my pictures back? Can anyone help?

  Hi all

  I just had a software problem with my mac and had to reinstall everything using Apple. One problem, lost lightroom 5. Apple said that the code of the address has changed. How to recover my photos or have I lost?

  At soon Pete J

  Hi Pete,.

  You can install Lightroom via this link:

  Download Photoshop Lightroom

  However, to get the rear changes you have previously done in Lightroom, you need to get the backup of your previous Lightroom Catalog.

  Store you the backup of your Lightroom catalog before recharging your Mac OS?

  Kind regards

  Claes