Intermittent problems with the laptop DV6 wireless

I bought a HP DV6-6145TX about 2 weeks ago and in recent days the wireless connection no longer works.

That is to say that even though I can ping it does connect to Web sites.  If I continue to clicking Refresh then it will load and then work ok for a few minutes, and then the same problem, website does not again for a minute or two.

Is this a hardware problem? (I already loaded to the top of the latest Intel drivers wireless off the HP website and tried to disable the bluetooth module).

Operating system: Windows 7 Home Premium 64-bit

Hi Paul,.

Thanks for the tips.

It did not work.

However, I found a tip on the web that makes. Essentially had to reset the network with the following settings:

netsh winsock reset catalog

netsh int ip reset reset.log

Hopefully someone else gets help out of this because it has been massively annoying.

See you soon,.

Jason.

Tags: Notebooks

Similar Questions

  • 3 laptops different ALL been facing intermittent problems with the USB ports.

    We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

    A few more questions:

    Is there a USB device that you use with all three computers?

    This problem occurs with all kinds of USB devices?

    The is the problem with all the USB ports on each laptop?

    Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

  • Problem with the network connection Wireless since installation of win 7.

    I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
    And the funny part is that when it detects one network different, other than mine, it connects and works very well!

    I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

    What to do?

    Hi KlinzmannFussballspielerin,

    Welcome to the Microsoft Answers community.

    Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

    I suggest you to update the network drivers.

    Steps to update of network driver:

    1. click on the Start button.

    2. in the search box type devmgmt.msc, and then press ENTER.

    3. Select the network device and right click on it

    4. now, select Properties.

    5. in the Properties window, on the driver tab, click Update driver.

    6. After installing the updates, restart the computer.

    For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

    To solve your problem, try to turn on network discovery. To do this follow the steps below:

    1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

    2. click on the chevron to expand the current network profile.

    3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    To learn more about this feature, please visit the below mentioned link:

    http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

    If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

    To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

    http://support.Microsoft.com/kb/299357

    Disable the IP helpdesk:

    1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

    2. scroll down to the IP assistance service, right-click on it and select Properties

    3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

    4. then click on "Stop" to stop the service from running in the current session

    5. click on OK to exit the dialog box

    Disable IPv6:

    Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

    NOTE: You should do this for each network connection.

    Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756

    (How to back up and restore the registry in Windows)

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

    To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

    1. Click Start, type regedit in the search box, and then click regedit in the list programs.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    2. Locate and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

    3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

    4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

    5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

    6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

    7. in the value data box, type 1 and then click OK.

    8. close the registry editor.

    By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

    Hope this information is useful.

    Let me know if it worked.

    Thank you, and in what concerns:

    Umesh P - Microsoft Support

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • Problem with the laptop overheats.

    Hi all

    I am working on a DELL laptop. He even sends warm air by her orifices. I think that probably there are some (or large amount of) dust on hardware devices inside.
    I know that the best way is to open it and clean these parts by a compressor (for example), but there are two points here:
    1-do you agree that this hot air is due to dust and I need to solve this problem by the shears of cleaning equipment?
    2. I did not open any computer laptop ever, a little scared (because this laptop is not mine). You always tell me to do? If so, what are the rules I have to observe before, when and after you open the laptop?

    Thank you.

    You can sometimes get the lint and dirt outside blowing into the cooling in the other direction with the laptop turned off but it must be a blow hard. The short pulses with a can of airduster spray is more effective.

    Unfortunately, if it's really boilerplate it may not work and the fan removed to erase it. It's the ease varies depending on the model. There are many videos of portable Louise on utube certainly of a different quality. Unless you are 100% sure they can be a bit complicated because there are a of clips often hidden to save any screws holding together

  • Problem with the laptop does not connect to wifi.

    I have a new laptop to windows 8 toshiba still in the menu setup and he asked me to choose my wifi so I did and put the password and its says unable to connect to wifi, all other laptops and tablets are connected to wifi I chose but its only the my laptop which does not connect. What should I do?

    Hello

    1 have had any changes made on the computer before the show?

    2. do you get an error message? If Yes, what is the exact error message?

    To solve the problem with Wi - Fi internet access, you can follow these methods:

    Method 1:

    I suggest you to refer to the article and see if it helps:

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

    Method 2:

    I suggest to refer to article and follow these steps:

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Let us know the results. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

  • HP 15-r249tu: for the last two months I inform HP to address my problem with the laptop HP 15-r249tu.

    For two months I contact HP chat support to fix my problem with my HP laptop 15-r249tu with the L2Z88PA product id. The laptop was completely dead and does not work. I contacted HP for cleaning on site (it covers the warranty on site) and there is still no reply fron their side. So I intend to give a complaint to the Court of the consumer against the owner of the store that I bought the laptop (he only said support HP was good and me to buy the misleading HP product)

    It took the shop and he told to contact HP support for replacement of the battery. So I contacted HP support for this problem and they said to do a battery test. So I did test battery and shows like 'calibrate '.

  • Problem with the HP DV6 - 6B25TX WLAN and Bluetooth drivers

    I recently bought the DV6-6B25TX and installed WINDOWS 7 64-bit OS on the machine.

    On the HP site I am able to find all the drivers except the WLAN and Bluetooth drivers.

    Drivers available on the Web site are for INTEL/RALINK material but the material in my machine seems to be of Broadcom.

    So can you please provide me with the links to the right drivers for the WIFI and Bluetooth for my laptop?

    WLAN Driver:

    http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55140.exe

    Bluetooth:

    http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55079.exe

  • (Redirected) Technical problem with the laptop warranty

    I just bought a new Inspiron 15 700 series in January and in just 2 months it broke down 2 times. I am a student of the University & without my laptop I miss out on a lot of things. I bought dell because that my last laptop was perfect for 4 years & was held without any problem but this laptop is my worst purchase ever.

    I even called customer service, they kept me waiting for 30 minutes, I do not unplug the phone, the person even took my number and then suddenly disconnected call & he never called back. There was no resolution of the issue, I even he asked the number for the Department and the complaint which it did not. The guy on the call was harsh, I told him that the charger is working & he said, how do you know? I was on a call with the Dell customer 1 hour service & there is no solution. I wasn't expecting this from Dell.

    I am very disappointed by the Dell customer service, its quality is deteriorating. I don't have a laptop of these 3 days, I missed an important presentation because of this. A new laptop to fall twice in 2 months & Dell doesn't care. I would never buy a Dell laptop because of this experience, I would never have let someone in my family buy a Dell & I will post reviews of their service to the customer & product on amazon.

    Extremely disappointed with Dell Service & product.

    Better to post this thread in the Customer Care Forum here:

    http://en.community.Dell.com/support-forums/customercare/f/4674.aspx

    Bev.

    Edited for content.

  • Windows 7-problems with the laptop computer's System32 folder

    I bought this brand new Acer Aspire 5251-1005 computer laptop a week ago from Best Buy and it comes pre-installed with Windows 7. Everything went beautifully except for an unknown problem. A guy organized, I have some of my important programs pinned on my taskbar (for example, MSN, office, Skype etc.). However, when I right click in a program (ie. MSN) and click on a task (IE. Mail box), this task is not activate Instead, my System32 folder opens... Very weird.

    I searched on several forums. I tried to do a system restore (quite a pain to reinstall everything) and did not work. Tried to activate my guest account to check if my account is corrupted. This was not the case.

    If anyone has a solution (hopefully one that doesn't require too many steps) Please help me!

    I had the same problem with ACER 5251-1513, and it turns out to be a third trial that Shredder calledEgis Tec included with MyWinlocker suite program.

    After you have uninstalled Egis Tec Shredder, the system is returned to normal.

  • Problem with the Linksys WPSM54G wireless print server

    Hello.  I'm wireless network printer Canon Pixma ip1500 my home wireless network.  I can't install the appropriate software on one of my computers, a Dell Inspiron 2200 running Windows XP Home Edition.  The installation software for the computers installed on other computers I use.

    Linksys support and assistance is neither friendly nor helpful.  I have two questions, and I'm grateful (really thankful!) for any help:

    1. the installer crashes when the software is copy the files to install on my computer to 96% complete.  If anyone has had this problem, and if so, do you have a solution?  The Linksys forums have a lot of posts on this topic, but none of the suggested fixes worked for me, so I am seeking thoughts alternatives here.

    2. by way of solution, it was suggested to me to try to add a TCP/IP port to the printer and try to print using LPR.  I only vaguely understand the importance and the technical stuff underlying all of this, but I think I did what I had to do to put in place.  It does not, however, and it seems that the problem is with the queue implementation.  Neither L1 (the setting suggested by Linksys), or other parameters (L2, L3, USB1) no longer work.  I would be grateful if someone could advise me of the method to determine the appropriate queue setting.

    I don't know if this should be broadcast in printers or wireless networking forum, so I write both.  I apologize for any inconvenience that this duplication creates.

    Thanks much for any help.


  • problems with the laptop to the TV.

    I have a laptop connected to a hd tv (the wire is hd15).

    laptop is a Toshiba.

    Intel graphics accelerator driver for mobile used close or respond in some way, trying to open a simple solitaire game, it says no suitable graphics devices found. also the display settings do not allow for any changes and cannot be closed.

    You should also see if you can set the screen on the laptop resolution to the
    native resolution of the TV.
     
    Wednesday, July 28, 2010 22:26:38 + 0000, demor117 wrote:
     
    >
    >
    > I have a laptop connected to a hd tv (the wire is hd15).
    >
    > laptop is a Toshiba.
    >
    > Intel graphics accelerator for mobile driver will not close or respond in some way, trying to open a simple solitaire game, it says no suitable graphics devices found. also the display settings do not allow for any changes and cannot be closed.
     

    Barb Bowman

    http://www.digitalmediaphile.com

  • Satellite C660-26R - problems with the laptop performance

    Hello

    I bought a C660-26R for Christmas, and since I had some real problems, watch YouTube videos and download things such as itunes or soundcloud. I have a good connection speed but I can't watch a video over a few seconds and let the kids play games on miniclip for example will not work.

    I downloaded the latest version of adobe flash player, windows updates are up to date and my internet security is very good. But I don't know why, I've met so many problems. It takes forever to pay for purchases online as well.

    If anyone can give me any advice or solutions, it would be a real and simple, help the best.
    all the best

    On this virtual path, it is not possible to say what the problem is here and give some concrete tips what you can do about it.
    I would like to have your laptop in front of me, to see what is happening exactly and how your laptop reacts with different commands. In my opinion, it is just a means to understand all your problems.

    Please don t get me wrong, but I would highly recommend you to find someone who has a very good PC know-how and ask for help.

  • Problem with the HP 8500 wireless printer

    I "inherited" the administration of a server Win 2008 domain.

    On one of the computers in domain, there is a USB connection to the wireless printer and the specific computer has no problem printing. Asked me to give other computers to access this printer.

    The printer was already connected to the router with a static IP, the envelope of the router DHCP-range wireless.

    All computers in the domain can 'see' the printer

    The latest driver/software package is installed without error

    HP doctor finds no errors

    HP printing Center sees the printer.

    I can scan

    but...

    I can't print (test page or anything else).

    I tried things.

    (Completely) removed and reinstalled.

    Installed cables and (after uninstalling) as wireless.

    Changed settings of the spooler to lead.

    Opens UDP 427

    And a hundred other things I could think of.

    Any help would be greatly appreciated.

    FIXED.

    Sorry for the delay but I got my hands on the system again today.

    Did as you suggested and open 427 UDP and TCP. That seems to work for Vista. Windows 7 doesn't have this problem.

    In addition, nothing worked until I rebooted the rooter. Then as if by magic, everything worked like a charm.

    Thank you

  • graphic problem with computer laptop dv6-3123tx

    I have hp dv6 with ati radeon graphics card 3123tx round 5650. I've recently upgraded to win 8 and now I cudn switch on the ati graphics driver, I tried the Device Manager screen becomes black. Can someone help out me.

    PS: I did a full install of windows 8 (I did not go to win7) so all of my software hp disappeared. I have not "graphics switching option" as well

    At this time, HP will have to create an official switchable graphics for switchable graphics to work properly. This is because Windows 8 use a different display driver architecture.

    I can't guarantee this works, but you can try the steps listed in this post.
    NOTE: The steps listed in this post are not official measures of HP. HP assumes no responsibility for the result of these steps, because this is a user to user community.

  • I have a problem with the laptop microphone.

    I built in laptop computer microphone and earlier today, that it worked, but for some reason when I go on teamspeak, he tried to register but don't want to, but on my cpu itself, it does not record the sound of the microphone, but I hear it in my helmet. It's really weird, any advice?

    Hello

    Have you tried to spend in Device Manager > sounds > uninstall driver?

    Reboot and Windows will reload the driver.

    1. Open Audio devices and sound themes by clicking the Start button, click Control Panel, hardware and sound, and then clicking sound.
    2. click on the recording tab.
    3. double-click on the microphone you are using speech recognition.
    4. click the levels tab and then use the slider to adjust the entry level for your microphone.

     
    Try the above steps and check the result. If the problem persists, please visit the following link and run Microsoft fix to reset the sound settings: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems
     

Maybe you are looking for

  • Can I install Win7 on Satellite C850-1GL without losing the warranty?

    Hello I bought a Toshiba C850-1GL with a pre installed Windows 8 a month ago.Can I, as a professional (Integrator) reformat the HARD drive and then install Windows 7 without the warranty goes out? Sincerely.

  • Satellite M60 164 - USB problem

    I have recently introduced a new Toshiba laptop and am runing Windows XP with SP2. I'm having a problem with some USB devices powered like a USB stick or disk external hard usb. The USB key that I use is fed by another usb port, I tried one on Tosh a

  • Other users in using the software

    Is it possible to restrict the use of a program for a specific user. Is it possible to use a program only for a user without having to reinstall the program

  • System crashes, requires the difficult start run World Of Warcraft Win 7 64 bit

    * Edited for completion 10/29/09When I run World of Warcraft, my system will lock up and require a difficult start. Sometimes this will happen after only a few minutes, sometimes it will take 1 to 2 hours, but it will always be the case. That's what

  • D3DM dill so I can use my Reflx Xtr Flight Simulator

    Where I can support this dill d3dm program that is necessary so that I can use my Reflx Xtr Flight Simulator, why isn't it not installed Vista as in windows XP. Why it was removed from Vista? Forward to your response