intermittent voice transmission

Droid Maxx. 2 years and more. Sometimes what I say is not heard at the other end. Then it's OK. No trend about the power of the signal or other obvious factors. Not seeing any physical problems with issuer being blocked. No hearing problem. Suggestions?


Using Advanced calling? If you are, is it better if you disable VoLTE?

Tags: Motorola Phones

Similar Questions

  • Transmission of voice messages by extension instead of name?

    Is there a setting in the unit in advance voice messages by extension, rather then the spelling of a name? I think the name is faster, but for some reason... we have a few vps who think differently.

    Thank you

    Hi Tommer,

    Hows things? I hope all is well with you!

    Take a look at this snippet and document. I think that's what you're looking for:

    For an individual user.

    Change your Message to setting

    Cisco Unity provides two methods for sending messages to other subscribers using the keyboard of your phone:

    Spell out a name of the Subscriber.

    Enter an extension of the Subscriber.

    You change the address of message that Cisco Unity uses by default only from Cisco Unity Assistant, not by phone. Depending on how Cisco Unity is set up, you may be able to switch between the entrance of the spelling and number by pressing on # when prompted to send a message by phone regardless of the message addressing the setting you choose in the Cisco Unity Assistant.

    To change your Message to setting


    Step 1 in the Cisco Unity Assistant, in the Preferences menu, click on the phone Menu.

    Page on the phone preferences Menu of stage 2, in addressing when a Message I would like to identify a Subscriber by section, click the option you want to use by default for messages that you send.

    Step 3 scroll to the bottom of the page and click Save.

    This doc:


    Or change to a default parameter;

    Conversation settings for the Subscriber model

    The conversation of the standard Subscriber is a set of prerecorded instructions and options that Cisco Unity plays by phone to subscribers when they listen to, send, and manage messages, and they change their Cisco Unity settings. Note that Cisco Unity also offers an alternative to the standard conversation conversation.

    Subscribers > Subscriber model > Chat Page

    * Identify a Subscriber by *.

    Select how the subscribers address messages to other subscribers. Subscribers can address messages over the phone by entering extensions of the Subscriber, by spelling out their name or spelling of their surnames. Name address requires letters keyboards on phones of the Subscriber.

    In the conversation subscriber, subscribers can pass a name address and addressing by extension by pressing the key twice. Note that when the box hit the search name spelled is disabled on the system > Configuration > page settings, subscribers can address messages over the phone only by entering subscriber extensions.

    This doc:

    Also here is a similar thread in the last month;

    I hope this helps! Take care.


    Remember messages useful rate...

  • BlackBerry Smartphones phone has no sound, no transmission of voice

    Phone to call and accept calls, but when connected, no noise, no voice will anyway.  Voice mail allso connects, but not sound.  What can I do?

    Hello and welcome to the community!

    Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.


  • Re: Satellite Pro U400: voice is not received correctly using Skype

    I have a little problem with my laptop. When I talk with Skype, you use an external microphone, my voice is not received correctly.
    This only happens with my laptop and only with Skype.

    I tried to change the ADSL line and a microphone, but my voice is always received intermittently.
    How can I solve this problem?

    Thanks a lot for your help! Bye,.


    Have you updated Skype to the latest version? Visit the site of the factory for an update.

    Try to update the audio driver on your laptop. You can find it on the Toshiba site: decision-making supported Downloads & => Download drivers

    Sorry, but for the moment I can say more about it.

    Good bye

  • difference between gateways, voice and Porter


    Someone might well want explain (or provide a url link) the main difference between the voice gateways and a guard?



    Your best source of information is the book of Cisco Press 'Cisco Voice Gateways and guardians (GWGK)' which explains these 2 more in detail. I have included information to help...

    The role of voice gateways:

    In a VoIP environment, voice gateways are the interface between a VoIP network and the public switched telephone network (PSTN), a private branch exchange (PBX) or analog devices such as fax machines. In its form the simplest, a voice gateway has an IP interface and a legacy phone interface, and it manages the many tasks involved in translation between protocols and transmission formats.

    At least one gateway is an essential element of any IP telephony system that interacts with the PSTN or analogue devices. In addition, when the front doors are configured correctly, many can resume when it is inaccessible to a Cisco CallManager.

    The gateway that enables communication between the two networks by performing tasks such as these:

    Interfacing with the PBX and the PSTN or IP network.

    Support IP call control protocols, more than time-division multiplexing (TDM) call control protocols.

    For calls between VoIP and PSTN closing networks and REPETITION of the call media and noting the call setup and teardown artist.

    Providing additional services, like call hold and transfer.

    Relay of DTMF multi-frequency (DTMF) tones.

    Supporting modems and analog fax via the IP network.

    In a Cisco CallManager network, a gateway must also do the following:

    -Support the CallManager redundancy in replacement of spare CallManager.

    -Support survival call when no CallManager is available.

    Gateways communicate with other gateways, guards, their end points or their control agents, such as Cisco CallManager call or a PBX.

    Protocols that use Cisco gateways for voice signaling and media are:

    Media Gateway Control Protocol (MGCP)


    Session Initiation Protocol (SIP)

    Skinny Client Control Protocol (SCCP)

    Real-time Transport Protocol (RTP)

    The role of guardians of the voice:

    Access controllers help scale of large VoIP networks. Businesses that are geographically dispersed, networks of voice, or that have become so important that they are difficult to handle, could opt to segment their network. In a network of CallManager, you can create multiple clusters. In this case, you need to configure a full mesh of connections via the WAN IP to connect all segments or clusters. You need to configure the dialing information for each remote location on each bridge and CallManager cluster.

    It is preferable to use the guards. In a network that has doormen, trunks are necessary only for the keeper and the goalkeeper keeps information of remote endpoint.

    When you use access controllers, gateways and CallManager to register with their goalie. Doormen divide the network into 'zones', or groups of devices that fit to a particular access controller.

    When an H.323 gateway receives a call that is intended for a remote phone, he asks the guard for the location of the endpoint.

    If the call is for a different area, you can configure the guardian to allow it only if sufficient bandwidth is available. In more complex networks, you can use a directory gatekeeper to maintain information on all areas.

    You can configure routers Cisco with the Cisco IOS appropriate as guardians H.323.

    Please note the useful messages...

  • Encrypted voice over RTMFP


    I'm the voice messanger encrypted coding. I heard, that its flow in NetStream is encrypted by the symmetric key algorithm. Is this true? If this is the case, where it is generated? Is the exchange of keys between peers based on smth like SSL (secure public key algorithm Protocol)? I want to make sure that no one can access this symmetric key. I would appreciate detailed information about encryption of transmission (graphics, technical references) because I am preparing studies on this subject. Thanks in advance for your help.

    Here is the information that we / i have disclosed in the past. I'm not able at the moment to share more.

    all packets are encrypted with AES-128-CBC.

    AES encryption keys are derived using Diffie-Hellman with a main module of 1024-bit (RFC 2409 MODP Group 2) end-to-end.

    all certificates of client Flash RTMFP include their public key DH used in the agreement of key-to-end.  the "peer ID" (NetConnection.nearID) is the SHA-256 of the certificate hash.  private/public Diffie-Hellman key is chosen at random for each new NetConnection using cryptographic Pseudo-aleatoire number source of the platform (for example/dev/urandom).

    This construction makes customer Flash ID approved tamperproof.  only one NetConnection in a client Flash operation can normally never have an identifier given by the peers.  It is only possible to have a network successful connection between two peers of customer if these peers have the private keys associated with their public keys.  an attacker masquerading as other peer can copy the certificate but not the private key, so the network connection will cannot succeed (since the attacker can not calculate the shared secret Diffie-Hellman that goes with the connection between the peer two IDs and therefore cannot calculate session AES keys, waiting for the other end).

    the nearNonce and the farNonce are also derived from the Diffie-Hellman shared secret and is known only for the two endpoints.  they are secret and impossible to forge.  they can be used as cryptographic challenges in the handshakes of application layer.

  • HI, Siri would not speak in Italian Luca voice after update for Sierra

    HI, why Siri not talk in Italian Luca voice after update to Sierra?

    Open (Apple menu) > System Preferences > accessibility > speech.

    Next to the system voice menu, select Customize...

    Scroll down to Italian, and then select Luca, and then click OK.

    It will take a few moments to download the new voice.

  • The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

    The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

    Depending on what you mean by "voice command", either:

    Settings / general / accessibility / VoiceOver / OFF, or

    Settings / Siri / OFF

    As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

    Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  • Sierra of MacOS - Siri cannot make voice calls.

    Hi guys,.

    Siri is supposed to be able to make phone calls via the iPhone, the Mac, in the Sierra de MacOS?

    Cause I can make phone calls (not the Facetime calls) fine if I use the Facetime on Mac app and click on the phone number, I want to call, or if I take a certain number of Contacts. But if I try to open Siri and make a voice command to "call X", he always tries to do through Facetime. Which means he's trying to make a Facetime call instead of a voice call normal.

    Is this a bug or missing feature? Is there a fix or a workaround for it? I wish I could use Siri on my Mac, just as I do on the iPhone.

    I observed the same behavior, so I think it's a missing feature.

    And page (below) which deals with Siri on Mac shows a command "FaceTime", but not a "Call" command  (As I say, I used the "Call" command and observed the same behavior you did.)

    Use Siri on your Mac - Apple Support

  • iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.


    My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

    Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

    What could be?

    Please help me!


    Here is my model of iMac:

    iMac 27 "mid-2011 model 12.2

    Intel Core i7 3.4 GHz

    AMD Radeon HD 6970M 1024 MB

    OS X El Capitan 10.11.6
    SMC 1.72f2

    Boot ROM IM121.0047.B23

    reset the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

  • WiFi intermittent

    For the past two weeks, our Time Capsule wireless connection (2015) (Version 7.7.7) was extremely intermittent. He goes out for a short period and then turns back on. Our ISP told us to recycle and get a new modem cable. We did it and the same thing still happens at least 4 or 5 times a day. Failures range from 2 to 3 minutes to 20 minutes. During outages of the time Capsule has a light amber, and then the light flashes green and then go back to the fixed Orange until it returns the signal and light turns solid green. When activated, the signal is always strong. Does anyone have an idea what is the cause?

    MacBook Pro

    MacBook air


    everything works Sierra

    Unfortunately, a constant amber status light seems to indicate a potential failure of the time Capsule. It seems, from your description, that the complete failure has not occurred but has been intermittent.

    If you bought the time Capsule in the year, you can return it for a replacement; otherwise, if you have si vous avez achete bought with another Apple product calling and have AppleCare with this product, you would potentially have three years warranty.

  • Deselection of voice on improvement in Inspector restores the default settings.

    Voice more improvement is a combo of compressor, deEsser, and EQ sound effect. I changed the settings, but when I deselected the effect in Inspector (clicked on the little blue box) to ignore the settings then changed the effect... all the settings changed back to their default values (except for the 'Quantity' slider). This isn't how it's working. Deselection of effect should work as a derivation not a reset. If someone else can confirm this?

    This happens even to the VOE effect when saving file > save Audio effects presets, inserted on clip, unchecked then reselected in the Inspector.


    10.10.4 yosemite

    10.2.3 FCPX

    I see the same thing. I agree that it is not normal.

  • Does anyone know how to get rid of the voice? More my screen is black

    DDoes anyone know how to disable voice? Also my screensaver is not showing anything


    To disable VoiceOver and curtain of screen (which explains why your watch screen is off), follow one of these steps:

    • On your iPhone, in the application of the watch, go to: My Watch (tab) > general > accessibility > VoiceOver > disable VoiceOver.
    • Or use Siri:
      • Use Hey Siri or press and hold the digital Crown (round button) until you feel a slap on the wrist of your watch.
      • Then say: "Disable VoiceOver."
    • Or, if the shortcut of access has been enabled and configured for VoiceOver, you can disable the feature of your watch:
      • On your watch: try to press quickly on the digital Crown three times.
  • I would like to ask how to disable voice command in iOS 10

    I have a speech impediment, so I do not use SIRI control or voice. Ios9 voice control screen appears rarely, but I updated to ios10 in my 6s, that voice control screen appears desperately all the time that the home button has a greater sensitivity. I understand a short press is necessary but be handicapped with limited dexterity a shorter press is harder to do. I understand, that I have, it off for lock screen. Can I completely disable voice control screen so that it never appears?


    Hello wheeliespeedy!

    Thank you for using communities of Apple Support.

    I see you want to completely disable the voice on your iPhone control so that the screen is never displayed. I completely understand that seek to do this, because I did it myself. I can help you with this.

    You can do this by disabling the Siri. Voice command and voice control settings are not available when Siri is turned on. To disable Siri, go to settings > Siri > select Disable Siri.

    Additional information can be found in the section of voice control of the iPhone user Guide.

    All the best.

  • I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

    I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

    1 iphoto sees not iphone - restart

    2 iphoto sees iphone but says "no pictures" - restart

    3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

    NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

    I have an imac 2015 - execution of yosemite

    Help my new iphone because 7 is coming today and I am terrified of the transfer.

    Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

    With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5


Maybe you are looking for

  • Satellite Pro P100 - GPU and CPU temperature question

    Hello I took my Satellite Pro P100 totally out, clean the radiator and vents.Also applied new thermal paste. The GPU is idling around 50 ° C fan always onThe CPU is idling around 40-45 ° C fan always on To my other Qosmio G30 with a Geforce Go 7600,

  • a member of the family (old people) forgot identifier apple

    Is their a way to retrieve the identifier apple and password by providing only the answers to security questions?

  • Wireless clients cannot connect to the wired client

    So, I have a server connected to the router via Ethernet, a laptop computer connected by WiFi and desktop also connected via Ethernet. The laptop used to connect to the server, but all of a sudden it no longer, and yet the Office can always connect t

  • Cut a single bit of a byte?

    OK, so im a mechanical guy, not a guy of programming allows so start there.  I just learn how works the hexadecimal and have limited experience in LABview.  I searched this topic for days, maybe that's just my vocabulary, but I have not found anythin

  • Series Packet Question: How to calculate CRC

    Hi all, I have tryied to find an answer on how to calculate the CRC on a RS232 packet received, its really driving me crazy! im a beginner, learned how to use labview read on different forums, and I had managed to build really good applications, but