internal card reader must be disabled and then enabled in before Device Manager it will not work properly.

Whenever I start my computer, my internal card reader must be disabled and then enabled in before Device Manager it will not work properly. I put an SD card in there and auto does not work. I check my computer and it shows that it is there, but when I double click on it to open it I get a message saying: Please insert the SD card. When I go to Device Manager and disable and enable fine orks. I tried different cards, but it makes no difference.
I installed a different card reader, but another did the same thing. This leads me to think it's a matter of Windows.
I tried to do a repair install, but it ends and said that the upgrade has failed?
Anyone have any ideas on how to solve this problem.

I am running Windows 7 Pro 64-bit. It is a Renesas controller and I use the 2.1.28.0 with firmware driver 4015.

I'm not sure but I may have found the problem. I see where a guy here was having a similar problem and it was caused by Acronis. I recently installed Acronis 2012. I have been lucky to uninstall, but I will update this post when I do.  He was also running windows 7-64 bit on a motherboard ASUS!

Acronis was the problem.  I uninstalled Acronis and now my card reader works as it should.  Strange!

Tags: Windows

Similar Questions

  • I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success.

    I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!

    There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.

    1. download the file of configuration Flash from here:

    Adobe Flash - Plugin version.

    Save it to your desktop.

    2. close Firefox using file > exit

    Then check the Task Manager > processes tab to make sure that firefox.exe is closed.

    {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

    3. then run the Flash configuration from your desktop file.

    4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

    • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

    See this:

    http://vistasupport.MVPs.org/run_as_administrator.htm

  • no internet until I disable and then enable network connection

    From time to time when I start the pc I have no access to the internet, I don't have on any other pc will work fine. I have to disable and then enable the network connection, but sometimes this does not work either, so I check and uncheck Protocol internet version 6 then it works. How can I solve this?
    I am running windows 7 ultimate

    Hello

    Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

    If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

    Download the drivers and extract them to a folder of your choice.

    In Device Manager, right-click on the adapter.

    Click Update drivers and choose her browse my computer for drivers.

    Choose let me a list of choices, click on disk and point to the folder with the drivers.

  • I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

    I bought a new computer and also Adobe acrobat Pro XI.  It did not work properly.  I uninstalled and tried to reinstall it, but the computer will not accept the serial number.  What can I do?

    You accidentally type in a redemption code when he says he only wants a serial number?

  • Hallmark bonus software shows the latest version of Hallmark cards must be used and I did. But the Bonus software does not work.

    I bought for Hallmard Card Studio 2012 and received software bonus with most cards etc. When I tried to install the software of premium it says I have fearful to have installed the last Hallmark witn a 13. 1 something or other. I installed the latest version and I don't know what they mean. But they say that it has not been changed. What should I do?

    Hello

    What is you receive the exact error message?

    Method 1:

    I suggest you to uninstall all previous versions of the software and then reinstall the software on the computer and check if it helps.

    See the articles below:

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    http://Windows.Microsoft.com/en-us/Windows7/install-a-program

    Method 2:

    If the method above does not work, then I suggest you to contact the support of software to improve assistance.

    http://www.hallmarksoftware.com/support/support.aspx?NetID=CJ&RS=48&preflanguage=5

  • can't see the video on youtube (can hear the sound) unless I have disable and then re-enableplugin before each video. Any suggestions what the problem is.

    have updated firefox. have uninstalled and reinstalled Flash Player. Adobe websit confirms it. After that playback of video installation the first but the following videos will not be inless I deactivate the plugin and then turn it back on.

    Three updates this week, one with Flash that came out Tuesday or Wednesday and two of Firefox, such as the sea and Fri.

    Try to install the previous version of Flash - Shockwave Flash 10.2 r102.

  • I just updated to Firefox 23.0 for Macs and installed updates for Flash and Silverlight; Now Google 'search tools' & find image will not work correctly. Suggestions?

    When I click on 'search tools', options are no longer displayed (for example, the tool that allows a search of limited date or search for videos of different lengths). I happened to have a search page open before the update and drop-down menus to search tools always appear on this page, but if I click on it, the menu drops down, so I can't change the options. When I do an image search, the results page shows only 20 or if the images and the rest of the results appear only as gray rectangles with/without any image. Search tools work normally in other browsers, I installed it, but Firefox is my default browser (and I'm happy with that), so I want to fix the problem. I don't know if it is associated with the updates, I did yesterday, but it's the only thing I can think of that's changed. Before that, the search tools have been working properly.

    Hello

    Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
    Note: This will be you temporarily disconnect all sites, you're connected to.
    To clear the cache and cookies to do the following:

    1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
    2. Under "Time range to clear", select "all".
    3. Now, click the arrow next to details to toggle the active details list.
    4. In the list of details, see the Cache and Cookies and uncheck everything.
    5. Now click the clear now button.

    More information can be found in article to clear your cache, history, and other personal information in Firefox .

    This solve your problems? Please report to us!

    Thank you.

  • Updated to the Mavericks and now the MXF files will not work properly

    2008 mac Pro, just upgraded to the Mavericks. We use Canon XF 300 s that create MXF video files. When they are imported into first CC, different files have the first video on playback and I can not change the rest of the clips because they are all the first clip. The reading of the original files normally when you use VLC Player. I have the same question on all the machines of Mavericks, we have but not the machines that are still on Lion 10.7, the MXF files work fine. Is there a solution from Adobe, or is it a matter of Mavericks?

    You know what, I think I just solved her problem. Using the media browser, I was able to import a MXF file, because it combines all of the individual clips in a clip.

  • Update to Windows 10 has failed and now PC will not work properly!

    Tried to update to 10 - failed - now being told invalid product key it is and have used it for 3 years!

    Try the following:

    Click Start, right click on computer

    Click on properties

    Scroll down to the Windows Activation

    Click on the link 'change product key '.

    Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

    COA certificate of authenticity:

    http://www.Microsoft.com/howtotell/content.aspx?PG=COA

    ??

    What is the certificate of authenticity for Windows?

    http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

    or

    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    Alternatively, you can try to fix the following:

    http://support.Microsoft.com/kb/2230957/

  • The 6to4 card device is not working properly

    Hello

    I did a system health report on my laptop and this problem appeared:

    «The device 6to4 adapt does not work properly... it brings tv_ConfigMgrErr31...» The Plug and Play ID for the device is 14 "

    What this mean and how can I solve this problem?

    Y at - it update?

    I just run Windows Update and my phone is up to date.

    Thank you very much!

    Hello

    1. what version of Windows you are running on the computer?

    2. you remember make changes to your computer before this problem?

    Method 1:

    Follow the steps in this link and check if that helps: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

    Method 2:

    Try to update the drivers for your network card: http://windows.microsoft.com/en-US/windows7/Automatically-get-recommended-drivers-and-updates-for-your-hardware

    Method 3:

    Try to make an auditor of the system files on your computer and search for errors on the disc: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

  • Internal card reader freezes Satellite Pro A due to bent pins

    Hello

    The stems of my internal card reader are folded due to a card of memory being glued and then removed.
    This causes windows to freeze at startup.

    Now I can disable the software etc. to stop what's happening, but what I'd rather do is to physically unplug the internal card reader, so Windows does not attempt to find it and crashed.

    Is it easy to remove the card reader internal?
    If yes then it would cost a fortune to obtain Toshiba to fix?

    I don't really want to spend a lot of money on something that is not a value of more than £200, which I intend to sell soon.

    See you soon,.
    Dave

    > but what I'd rather do is unplug physically the card reader internal, so Windows does not attempt to find and crash.

    Since the card reader is part of the motherboard, you can not disconnect it physically.
    In your case, there are two possibilities;
    Either buy and replace the motherboard (I think that it s not an option for you die at high costs) or you would disable this card reader in Device Manager

    Welcome them

  • Internal card reader & USB ports stop working in Windows 7 64 bit - HELP

    This seems to be VERY popular problem between Vista and 7 users. I can't find the right difficulty any where. I have a HP Pavilion of D5200T running Win 7 Home Premium 64-bit. (I can provide more specific if necessary specifications). I read a few other posts in this forum with exactly the same problem as me, I tried the suggested fixes - most of them anyway - and my problem persists.

    This is the story of the kind: bought PC Cognac nine in June 09. It came with Vista Home premium 64-bit. On the front panel, I have the HP 15 in 1 reader cards and below that another panel with micro/headphones, 2 USB ports and 1 port Firwire catches. They all worked great worked great, no problem at all. I bought Windows 7 and improved in October 09. These two USB ports and card reader have been in place since then. I turn on the computer or restart works and they. Slide into a car SD, CF, whatever it is. Little green light turns on, windows automatically opens on the screen indicating the contents of the card.

    The card reader is no longer everything first. It may be 15 minutes later, perhaps hours. I slip on a map and still get the little green light but nothing on the screen. As if no card has been inserted. 2 USB ports will do the same thing, just much less frequently. I step a USB item and I have an error message saying: is not recognized or not installed properly. If I restart - they are all back to work very well.

    So... this problem only started after the Windows 7 installed, then it is clear to me is where the problem lies. When card readers or USB is in their State of non-working, I'll go to Device Manager and see that they are always listed, and there is no indicator of errors.

    This is what I remember by train so far, without success. I uninstalled devices from the Device Manager, driver too. I tried unplugging them from the card, restart, reconnected, reinstall. I tried different plugs on the motherboard. I can't find the latest drivers. The courses are MS 21/06/06 6.1.7600.16385. I think I tried all utilities integrated in Win7 to try and diagnose, and none of them produced no results. I tried to disable the sleep function. I even reached out to HP support, and the best they have resulted so far is that the card reader is bad. They are sending me a new, but I do not think that this problem will be solved.

    As I said, I see this problem or similar to many, many forums but I have rarely seen a happy ending where it was fixed. Someone at - it the key? Help, please.

    For any question on Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 Forum for questions on Windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

  • Satellite M40X: Internal card reader does not work

    My internal card reader does not work. I think that I have not yet installed the driver, or may have other reasons, I don't know. Please show me how to find and install this driver.

    Thank you!

    Can you please check the Device Manager and tell us if any unknown device is listed there?

  • My Satellite A100 does not support SDHC cards with the internal card reader

    Hello

    My Satellite A100 can't stand my sandisk 4 GB SDHC.
    'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.

    is there a software solution?

    regrads,
    Itock

    I don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.

    I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.

  • Internal card reader card ZBook 15 SC

    I wonder if someone can provide specifications or information about the speed of the SD card on my new ZBook 15 reader. I use this for work and want to have a removable device to store personal files. I am currently using a 32 GB SD card, but it isn't excellent performance. I am considering either pass a 64 GB USB 3 flash drive or faster 64 GB SD card. What I want to know is how (what bus) internal card reader is connected to the and which will be a limiting factor even if I buy a fast SD card. Is there a record of read/write for the crack and what can be expected with different types of SD card?

    Hi Mcramblet,

    To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

    Thank you.

Maybe you are looking for

  • If I'm wrong deleted is all my saved passwords there a way to recover them?

    While searching for a forgotten password in my window saved passwords in firefox menu, I clicked on the 'remove all' button by mistake instead of the button "show all"; Thus, the removal of all my passwords. Is there anyway to get back them or will I

  • Satellite A200 - cannot install a driver for LAN and WLAN

    Hello! My LAN have suddenly stop working. I tried to uninstall the driver and install new on the site, but it did not work. LAN and wireless did not work.When I tried to install the driver, a message said you found the correct driver, but the file is

  • My mini ipad is stuck in recovery mode!

    My ipad mini has been slain in recovery mode after that my friend turned it off during the ios 8.1 update. Connected to itunes on my pc and he said he had to be restored and updated. Wait for the software to download, but an error occurred that preve

  • Pavilion Notebook M1Y13UA #ABL: clickpad does not respond immediately when you tapoterez

    Hello I have constant problems with the clickpad installed on my laptop. I can say that it is the touchpad/clickpad WORSE I've EVER had. It has been repaired twice by HP under my warranty coverage. First of all, they have changed a few son/cables ins

  • create a string ASCII of BCC

    I've been working on trying to fix a small detail in a communication routine, I write for speaking to a Hitachi L300P motor controller. My problem is that the commands are sent in blocks with a command STX to indicate the beginning, a node to indicat