Internal error during the installation of DirectX for the user final web runtime install

Hi all

I was browsing the forums and reading the discussions that relate to my question.  Unfortunately, each of the solutions that I found do not seem to solve my specific problem.
I recently got a new laptop (Dell E6540) and thought I'd try world of combat aircraft.  My old laptop did not have a graphics card that has been up to the task, but I think this one does.
I am running Windows 7, which integrates the latest version of DirectX (11).  I downloaded and installed the game, and when I click on 'Play', I get the message informing me that I'm missing the d3dx9_43.dll.  I then visit the Microsoft Download Center and try to download the installer of web runtime DirectX end-user.  Following the installation of the components in the stage of finalisation of the web installer, I get the following message:
"An internal system error has occurred.  Please refer to DXError.log and DirectX.log in your Windows folder to determine the problem. »
I then click OK in the error message, the web installer shows failed to install, so I click "Finish."  At this point, the popsup Program Compatibility Assistant, saying: the program may not be installed properly and gives me the opportunity to 'Reinstall using recommended settings', what I'm doing.  Then run the web installer a second time, giving me the same error internal system presented above.
I wonder if someone might have suggestions as to how I can resolve this issue (or to find the above mentioned .log files).
Thanks for your help.

While Win7 installed DX 9, 10 and 11 it does not install with all files.
d3dx9_43.dll is the latest DX 9 files.
The best method when you have not already updated DX is to use the DX Web Installer,.
then you can try using them.
Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

If you have the same problem with the DX Web Installer trying to boot into Safe Mode with networking
and try to run the installation program from there Web DX.

-L' Web Installer does not overwrite the DX files, it only installs the DX 'missing' files, so when it
is a DX of corrupted files and you do not receive an error with the name that you will need to use the full
DirectX Redist (2010), which I assume is what you are trying to use, as this will overwrite all the
DX files.
-Similarly, you can use Safe Mode (networking not required that you have all files) may
be used when there is a problem installing DX with the complete installation program.

-When there is a corrupted file of DX and you get the name of this file, an error, as with
your d3dx9_43.dll, you can delete this file in System32 (sysWOW64 when using 64-bit
Windows) and when you run the Web Installer will replace the now "missing" with a new file
copy.

Absence of the foregoing, it may be your problem is more to do not have the necessary permissions to
install the DX.
This could be due to UAC settings too high, does not not as administrator or another
restrictive framework, maybe even your anti-virus (disable temporarily when trying to install DX).
Try - R / click the DXSETUP.exe. Then go to Properties-compatibility and check the box
next to the race... as an administrator.
.

.

Tags: Windows

Similar Questions

  • Internal error during an installation of Musicnotes Suite

    I'm about to install a product call Musicnotes Suite and I get an error message: internal error: failed to expand shell folder constant "userdocs."    Help, please!

    Hello

    I suggest you to check if the program is compatible with Windows vista, here is the link for compatibility:

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

    Also check out this link:

    http://support.Microsoft.com/kb/822798

    It will be useful.

  • Internal error during the shooting to the top of my VM on improved 6.0.4

    Hello!

    Just bought the new merger 6.0.4 and was going to start my Vm:s but none of them work more. I just get "Internal error" and then it stops.

    Found the 'support Collect information' command and attaching. Is there anything else I can do? Ever tried to troubleshoot before VMware so a bit of a novice. Grateful for any help I can get!

    Hello gesias

    Welcome to the VMware community forums.

    Gesias wrote:

    Is there anything else I can do?

    First thing to try is simply restart OSX.

    If this does not work, uninstall and reinstall.

    --

    Wil

  • Error during the apex 5.0 is installed

    Hello to everyone

    I get an error when I install APEX 5.0

    REQUEST 4411 - Oracle APEX System Messages and Native Types

    application/delete_application

    Start

    *

    ERROR on line 1:

    ORA-04098: trigger "APEX_050000.WWV_FLOW_SESSIONS_T2" is not valid and does not

    revalidation

    ORA-06512: at "APEX_050000.WWV_FLOW_SESSION", line 946

    ORA-06512: at "APEX_050000.WWV_FLOW_API", line 2154

    ORA-06512: at line 2

    Disconnected from the database to Oracle 11 g Express Edition Release 11.2.0.2.0 - 64 bit Production

    I Don t know what happened?

    I solved this problen falls (waterfall)

    users

    APEX_050000

    FLOWS_FILES

    roles

    APEX_ADMINISTRATOR_ROLE

    APEX_GRANTS_FOR_NEW_USERS_ROLE

    And finally install again.

  • Try installing SAGE simply accounting error: "Error 1935. An our error during the installation of Assembly component

    Try to install simple SAGE accounting and the following error:

    "Error 1935. An our error during the installation of the Assembly {97F81AF1-0E47-DC99-A01F-C8B39A1E1873} HRESULT 0X80071A91 component. »

    After this error, I also receive this error:

    "Error: 1603 Fatal error during installation." Consult the help of Windows Installer (MSi.chm) or MSDN for more information.

    Anyone out there has any help with these errors?

    TKS!

    Hello

    1. are you able to install other programs?

    2. How are you trying to install?

     

    I suggest to follow the steps provided and check if it helps.

    Method 1:

    Problems installing and uninstalling programs on Windows computers: http://support.microsoft.com/kb/2438651

    Method 2: You can also configure your computer in a clean boot state, and then try to install it.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Hope this information is useful.

  • 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation

    When you try to upgrade Windows 7 SP1 to Windows 10 ' 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation "is a problem recurring and none of the solutions posted for a Samsung RV511 work.

    When will there be a solution of Microsoft?

    Concerning

    Hello

    Since Windows 10 is a completely new operating system, the computer manufacturer might still not have designed and developed drivers for it. As suggested waiting for the manufacturer to release the necessary drivers for the hardware and then try the upgrade.

  • 0xc007001d error during the installation of antivirus software

    0xc007001d error during the installation of antivirus software. AVG is the brand name. Installation stops with error code.

    Help!?

    I suggest that you uninstall and redownload it or switch to another brand or use the built in Microsoft Security Essentials. AVG has a bad reputation for bugginess, false positives.

  • Errors during the Installation of Oracle 9i

    Hello

    I write on this forum as a last resort to solve a problem (after trying for 6-8 hours now). After the first installation, the optional Oracle Configuration tools that run automatically, does not (2 of 4 processes), so I had to put an end to the installation. During its installation, they failed again, but the installation was completed and a database has been created.

    Operating system: Windows XP SP3
    Oracle software: Oracle 9i

    Now, I can not connect to the server. These are the errors I get when I try to connect to:

    Thanks to the command prompt:

    C:\ > sqlplus scott/tiger
    ERROR:
    ORA-12560: TNS:protocol adapter error
    Enter the user name:


    Through SQL more GUI: (scott/tiger and using string host = < my Global Database Name >)

    ORA-12154: TNS: could not resolve service name


    TNSNAMES.ora
    # TNSNAMES. ORA Network Configuration file: D:\oracle\ora90\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.

    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
    )
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    )
    )

    #EOF

    As required, TNSNAMES is an argument sqlnet.ora. In addition, I can't uninstall Oracle 9i as Oracle Universal Installer just freezes when I click on remove components. What can I do to uninstall completely?

    Please guide me to solve the problem. Thank you for your time.

    The OracleServicePRATHAM is running (Pratham is my DRM) as well as many other services as Agent, etc. of the listener.

    On top of your Oracle service is PRATHAM

    I tried your version of the tnanames.ora. I also updated the ORACLE_ID "ORCL". I always get an error-

    Then why you set ORACLE_SID ORCL?

    I guess PRATHAM

    Set ORACLE_SID = PRATHAM

  • Get the error during the copy of installation section

    When you install JDeveloper (jdev_suite_121300_win64.exe) on my Windows 7 with JDK 1.7.0_70 I get the following errors during the copy of the installation:

    • oracle.sysman.oii.oiif.oiifb.OiifbEndIterateException: java.io.IOException: java.io.IOException: com.oracle.cie.common.util.crlf.CRLFException: failure to transform C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh to C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh. Could not rename the temporary file: C:\Oracle\Middleware\Oracle_Home\oui\bin\fixcrlf3284256669950451090
    • oracle.sysman.oii.oiif.oiifb.OiifbEndIterateException: java.io.IOException: java.io.IOException: com.oracle.cie.common.util.crlf.CRLFException: failure to transform C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh to C:\Oracle\Middleware\Oracle_Home\oui\bin\deinstall.sh. Could not rename the temporary file: C:\Oracle\Middleware\Oracle_Home\oui\bin\fixcrlf3284256669950451090

    I'm on the administrator account.

    No idea why I get this error and how to fix it?

    Thank you...

    Please visit to solve the problem.

    http://rohanwalia.blogspot.SG/2015/06/unable-to-install-jdev-couldn ' t - rename.html

    Disable your antivirus and try to install.

    Thank you

  • Get the error during the installation of the regional coordination unit

    Hello
    I am facing the error during the installation of the RCU below. We gave the user sys and the DDT that works very well DOSPROMPT.the even when I give the configuration during the installation of the remote, I get the below error. Can someone help me with this problem.
    Thanks in advance...

    2012-10-02 22:52:58.645 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: SYSDBA, connectString: (description = (address = (host = localhost)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))
    2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: name of user and password invalid.
    Please enter the name of user and password valid
    2012-10-02 22:52:58.730 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:
    oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: name of user and password invalid.
    Please enter the name of user and password valid
    at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)
    at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)
    at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)
    at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1352)
    at oracle.sysman.assistants.rcu.ui.pages.DBConnectionPage.updateModel(DBConnectionPage.java:552)
    at oracle.sysman.assistants.common.wizard.WizardPageExt.wizardValidatePage(WizardPageExt.java:166)
    at oracle.bali.ewt.wizard.WizardPage.processWizardValidateEvent(WizardPage.java:710)
    at oracle.bali.ewt.wizard.WizardPage.validatePage(WizardPage.java:680)
    at oracle.bali.ewt.wizard.BaseWizard.validateSelectedPage(BaseWizard.java:2367)
    at oracle.bali.ewt.wizard.BaseWizard._validatePage(BaseWizard.java:3072)
    at oracle.bali.ewt.wizard.BaseWizard.doNext(BaseWizard.java:2152)
    at oracle.bali.ewt.wizard.dWizard.DWizard.doNext(DWizard.java:405)
    at oracle.sysman.assistants.common.wizard.WizardExt.doNext(WizardExt.java:261)
    to oracle.bali.ewt.wizard.BaseWizard$ Action$ 1.run(BaseWizard.java:3944)
    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
    at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:641)
    to java.awt.EventQueue.access$ 000 (EventQueue.java:84)
    in java.awt.EventQueue$ 1.run(EventQueue.java:602)
    in java.awt.EventQueue$ 1.run(EventQueue.java:600)
    at java.security.AccessController.doPrivileged (Native Method)
    in java.security.AccessControlContext$ 1.doIntersectionPrivilege(AccessControlContext.java:87)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:611)
    at oracle.sysman.assistants.common.util.EventPopUp.dispatchEvent(EventPopUp.java:94)
    at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
    at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

    3rd error is known, one can ignore it.

    Try it with the user of the system, I thought I told you that.
    This should work.

    Score pls help if

  • "The installation process has encountered an error during the installation of the shared technologies."

    Basically, whenever I try to download Adobe Premiere elements 11 on my Windows Vista computer, to halfway through a message appears saying that "the installation process has encountered an error during the installation of the shared technologies. If please restart your system and try again. »

    Whenever I insert the disc, I select the trial version, in case I have download the full version and it allows me to use my serial code.

    Someone said the destination folder could not contain more then 250 characters, then I changed its position of "C:\Program Files\Adobe\" in "C:\". ", but he still came up with the same message!

    I downloaded the new Adobe Reader 10, but this makes no difference to the process... no matter what I tried he always comes up with the same message.

    I also activate my antivirus software during the installation of Adobe Premiere Elements. Again, this is not do the trick. And I restarted my computer and tried to download it and not download more than once!

    Each time the same message comes back, and I have no idea how to fix... Its not my memory challenge which is a problem, because I currently have 50 GB free on my OS C:\ drive.

    I also have QuickTime version 7.6.9, which is apparently necessary?

    If you know something that I have not tried that can work, or the problem causing this and a solution to the problem, please can you let know me, thanks!

    Refer to this:

    Troubleshoot installation | Photoshop Elements, Elements first. Windows

    Mylenium

  • During the installation of PhotoShop item 11, "error during the installation of the shared Technologies.

    During the installation of PhotoShop element 11, I get "error during the installation of the shared Technologies. Please restart.

    I'm assuming you restarted your computer once before trying to re - install.

    I think that you have uninstalled all other Adobe applications. Please perform a manual cleanup to be sure that there are no files interfere with installation. Here are the steps:

    http://helpx.Adobe.com/Photoshop-elements/KB/manually-remove-Photoshop-elements-11.html

    If the problem persists, please share the logs from the following locations:

    % temp%\PSEInstall.log, PSE11.log,
    Elemets11OrganizerInstall.log,
    Organizer.log,
    PDApp.log,
    AMT.log
    OOBElib.log
    C:\Program Files\Fichiers Files\Adobe\Installers\<*PSE11*>. log.gz

  • STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

    My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

    I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

    Error during the extraction process. Details of error: path not found

    I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

    You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

    Please provide additional information on your system:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a CD/DVD drive work?

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

    If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

    You also will not start in any kind of Mode safe no more.

    Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

    Windows file protection could not initiate a scan of protected system files.

    The specific error code is 0x000006ba [the RPC server is unavailable.].

    Failed to start the RPC mode server safe either.

    I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

    There should be a backup copy of rpcrt4.dll already on your system, here or here:

    c:\Windows\System32\dllcache

    c:\windows\ServicePackFiles\i386

    You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

    There should be a backup copy of rpcrt4.dll already on your system, here or here:

    c:\Windows\System32\dllcache

    c:\windows\ServicePackFiles\i386

    When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

    Do you have a Hiren BootCD you can download here:

    http://www.hirensbootcd.NET/

    On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

    Direct HTTP mirror + Torrent, Torrent Magnet

    Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

    The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

    Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

    File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

    If you need a simple and CD burning, this is a free software popular software:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your new bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

    These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

    Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

    There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • The system has encountered an error during the interview of the application. If the error persists, contact the system administrator

    Hi all

    We cloned an Oracle EBS R12.2.2 instance and it worked very well for us. To increase the RAM of the newly created virtual computer, we did the virtual machine down. Once the RAM has increased, we started all the services (without error), including level of DB and Application layer. But when we try to access the application of EBS get the following error:

    -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    The system has encountered an error during the interview of the application. If the error persists, contact the system administrator.

    -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    Then I checked all the services, they are running.


    Log file: / u01/applmgr/SCREWS/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log

    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    Process of shell VIS_0402@VIS Manager internal simultaneous departure - ID 6095

    logfile=/U01/applmgr/vis/fs_ne/inst/VIS_ebsr72/logs/appl/conc/log/VIS_0402.Mgr

    PRINTER = noprint

    mailto = applmgr

    Restart = N

    diag = N

    sleep = 30

    PMON = 4

    quesiz = 1

    Reviver is ENABLED

    CP-SYSTEM ADMIN RESP. internal MISSINGThe competitor Manager encountered an error.

    Check the simultaneous log manager for more information. : APRIL 2, 2014 14:21:59 -

    Shut down the internal concurrent Manager: April 2, 2014 14:21:59

    List of errors encountered:

    .............................................................................

    _ 1 _

    Systematic AFPCSQ can't nec USER_ID value of the profile option. ORACLE

    error 1403 in get_responsibility_data

    Cause: get_responsibility_data

    has failed because of the ORA-01403: no data found.

    The SQL statement being executed at the time of the error was: and

    a exe

    .............................................................................

    APP-FND-01388: cannot read the value for option profile SQL_TRACE in routine and ROUTINE.

    List of errors encountered:

    .............................................................................

    _ 1 _

    Routine AFPCAL has received the code of failure while running or analysis of your

    simultaneous program CPMGR

    Examine your log file of concurrent application for more information.

    Make sure that you pass arguments in the correct format.

    .............................................................................

    The internal concurrent Manager VIS_0402@VIS ended with the State 1 - abandon.

    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    Note: Before you restart the virtual machine it worked great. It has not changed anything except the RAM to the virtual machine. After the start, we get error.

    I need your help. Please suggest me.

    Thank you

    Prabhakar

    Hi all

    Thank you for your support. I solved the problem. Find the info below.

    ===================================================================================================

    Question: Like I said existing VM is cloned VM. Then after we had changed the host name. I checked the database alert log file:

    Before the reboot: name of the node was the previous still node name VM that it functioned very well. (for ex: xyz.domain)

    After the reboot: name of the node is replaced by the new host name. (for ex: abc.domain)

    Once the name of the node is changed he started creating problem in starting the application services.

    One last thing, I want to mention here after hostname change, approval of new contextfile has 700, but it should be 755.

    Solution: I followed these steps.

    (1) stop all services on the LAYERS of the DB and APP

    (2) change the new contextfile permission if not 755 and the .env at the level of the source DB

    (3) cd $ORACLE_HOME/appsutil/bin and run as: perl adgentns.pl appspass = apps contextfile = $CONTEXT_FILE - removeserver

    (4) change the name from old host to the new host name, so find in contextfile.

    (5) start listener, then the database

    (6) listener status, it must must give service to the db instance

    (7) perform autoconfig with new contextfile (DB Tier)

    (8) perform autoconfig (pane APP)

    (9) start all services

    ======================================================================================================

    It works for me, and now the application is running. I hope that it will also work for others.

    Thank you

    Prabhakar

  • Sync has encountered an error during the synchronization. Unknow error

    I get the following error message: 'Sync has encountered an error during the synchronization. Unknown error. Synchronize automatically retrying this action. "In addition, currently, my favorites are useless: I lost all my favorites and I can't add any new.

    Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

    You can check for problems with the database places.sqlite file in the Firefox profile folder.

Maybe you are looking for