internal error of starting power

Hello I am running Vista Ultimate x 64 and when I restart my computer I get a BSOD (see photo ). I have to fight with it to get it to start up again, by either boot from the Vista DVD and do computer repair process, witch takes anywhere from 2 min to 30 min to complete and sometimes he says he cannot automatically repair or the last known good config, or sometimes both. I have not add new hardware, update device drivers or install new software this time I restarted. In fact when I do make it work it works fine, I kept it running for 40 days without problem. I'm always afraid to restart the computer ruined because of this problem. I'm the kind of guy who likes to keep my OSs to date (I do it religiously, so it kills me not to do the updates because I don't want to restart).

My config:
OS: Windows Vista Ultimate x 64 (Service Pack 1)
Mobo: EVGA nForce 780i SLI
PSU: 1100 watt ABS Labs
CPU: Intel Core 2 Quad (Q6600)
RAM: 8 GB of Corsair PC2 6400
Video: XFX 8800GT (x 2 in SLI configuration)
Omitted hard drives (x 2)

Interesting, maybe they stuck in an ISO in its new version, my mistake. If this may or may do not apply to the problem you are experiencing, a failing hard drive will present problems on the road. Now DFT is a very simple test... and I insist on 'simple' fairly strongly. It will only resume the most basic problems.

My recommendation would be to try to start the machine until you get and immediately back up your data. Then find a replacement drive.

Hot spare! The reader is not, but 15 months... In addition to number one that I did not get any S.M.A.R.T error, and I think it's a false positive. I have another HARD disk to the witch, I can back up data on, but I just thought to just backup to re - install Windows. My question is that how it is that my computer works well when it works? If it's a default say HARD drive, why - it not crash my system during a full scan of the system (preformed every night)? I had a HDD failure before and it crashed my system while running. Also when I start on my Vista DVD and make repair system, says he can't fix automatically and in the newspaper, he said something about a driver problem (I think it's very strange because maybe I'm wrong but doesn't work for X 64 Vista drivers have digitally signed?).

I think that the Imma just reinstall Windows because I can't afford to go out and buy a new HARD drive... I make sure all my important data is backed up all the time anyway so even if the HARD drive is like the 500 GB one I have sitting in the closet and dies I don't lose a lot. I've suffered catastrophic data loss before and learned from him. :/

Tags: Windows

Similar Questions

'Internal error' when starting a machine virtual

Hello
I'm under Fusion 6.0.2 on OS X 10.9.2. This is a new installation of 6.0.2 on a machine which was new two weeks ago. My VM is Windows 7 64 bit. My VM worked before I upgraded to 10.9.2, but I don't know which is linked. Now, when I start the VM, it quickly fails with a dialog box that indicates "internal error."
I found this thread where a few users have had the same symptoms:
Internal error when you start a virtual machine in Fusion 6 - Mavericks host
I tried a little things listed, with no luck:
You can also check $HOME/Library/Logs/VMware/and $TMPDIR/vmware-$USER for log files from the model vmware-vmx-* .log? If there is none, would you mind to do what follows?
-Add the following line to $HOME/Library/Preferences/VMware Fusion/config (please do not hesitate to change the path to something else)
vmx.log.temporaryFileName = "/tmp/vmx-temp.log".
-Start the virtual machine. When the error is observed, join the file specified above.
There is no files in a path. I created the configuration file and added the line, set 777 permissions on the two directories, started the virtual machine (it failed once again) and verified: STILL no files in two places.
Thank you. Could you do the following, and then try to switch on/off the virtual machine again?
Please let me know if the error message changes and if there is no base generated in /cores file.
The error message has not changed. I had to force-shutdown my VM to change the ways of solving problems (which was not obvious how to do!). It has not generated a /cores base file.
It's intriguing. Let's try the virtual machine running from the command line.
That would be if all fine print some messages in the terminal that helps us diagnose the issue further.
Starting the service
Oke-jrobb - mb:cores jrobb$ sudo/Applications/VMware\ Fusion.app/contents/library/services.sh--debut
Password:
Installation of the files in/Library/Preferences/VMware Fusion / thnuclnt
Copy .thnumod to/etc/thnuclnt
Copy thnuclnt.conf to/etc/thnuclnt
Copy thnuclnt.convs to/private/etc/cups
Copy thnuclnt.types to/private/etc/cups
Copy thnucups to/usr/libexec/cups/filter
Restart of printing services
No process matching not found
The bridge services began
Network services started
USB arbitration service started
From the virtual machine
Oke-jrobb - jrobb mb:cores $ / Applications/VMware\ Fusion.app/Contents/Library/vmware-vmx-debug - x/Users/Shared/Windows\ 7\ 7\ x64.vmx x64.vmwarevm/Windows\
/ Applications/VMware Fusion.app/Contents/Library/vmware-vmx-debug is not set - UID root. < - is - it important?
Trying a core dump with a limit of unlimited size
Core dumped.
A core file is available in ' / cores/core.24380.
ASSERT bora/vmx/main/configdb.c:2008
Panic loop
The referenced base file was created. I compressed it is 137MB. Let me know if you need to see.
I have attached to my zip Support information file. Please notify.
Thank you!

Have you tried to start the virtual machine after you restart your Mac?

Moved from VM with Snap Shots, doesn't start: cannot change the power state of VM: internal error

Hello
Last week, I decided to move from a Windows host based Linux system. So I went through my VMs their power off and copied to another drive. I then installed 7 Centos and reinstalled VMWare Workstation 12 re-imported the virtual machine in VMWare and I tried to start.
I received the following message...
"Cannot change the power state of VM: internal error.
Suspicious, I looked at the folder that contains the machine virtual and noticed it contained snapshots. DOH!
I guess it is pretty bad, not sure where to start?
Any help would be appreciated.
Thank you
James

I copied VM, with and without clichés, without problems. Have a few running on OSX Fusion so

The first thing I would check would be for folders and .lck files. If so, remove them.

Lou

bad battery or DC power converter? the main battery (internal) (error 601) windows displays battery to

defective battery or DC power converter?

battery (internal) (error 601)

Windows displays the battery to 100%

laptop not boot battery, will start only on ac, but battery installed shows error 601

HP eliteBook 6930

no spare battery

althefirst wrote:

defective battery or DC power converter?

battery (internal) (error 601)

Windows displays the battery to 100%

laptop not boot battery, will start only on ac, but battery installed shows error 601

HP eliteBook 6930

no spare battery

This error is a bit confusing. At first glance it seems to refer to the CMOS/RTC battery but actually refers to the main battery to the laptop. Even if the computer indicates that the battery is at 100%, it would be a good idea to check that it is in working condition. I think that it is a good first step, because although it doesn't show 100% charge, you say the laptop does not work unless it is on current alternative. This paper addresses the issue further.

As indicated in the document, the HP Battery Check will be performed to determine if the battery is faulty.

To perform battery check do the following and display the result.
1. Unplug the power cord and turn the computer off.
2. Press on the button / stop to turn on the computer.
3. Press the ESC key immediately seeing the HP or Compaq logo screen.
4. The Start menu appears.
5. Press F2 to select F2 System Diagnostics .
6. Select battery Test in the list of diagnostic tests.
7. Connect the power supply cable.
8. Click Start Test Battery on the battery Test page.
If your battery fails this test, it will need to be replaced. To get a spare battery, you will have to contact HP Support. If you are in the USA / Canada you can call to the 1-800-474-6836. If you are located outside of this area, you will need to go to the HP support site and after selecting your country, search for "Customer Support" in the lower right corner to get contact information for your region.

I hope this helps!

JDeveloper problems with start, role, internal error
Hi all I would ask same question but now I'll try to be more specific.

I installed JDev it work vary nice until power exploded. When it came to power, I start JDev and I got message something concerning internal error
Here is a part of the error
This 8, 2010 12:59:09 oracle.adfinternal.rc.connection.AdfConnectionContextProvider getConnectionContext()
SEVERE:
oracle.adf.rc.exception.CatalogRuntimeException: error when getting a connection context by using the login provider context [oracle.adfinternal.rc.connection.AdfConnectionContextProvider] origin = [scheduled start of root element.]
at oracle.adfinternal.rc.connection.AdfConnectionContextProvider.getConnectionContext(AdfConnectionContextProvider.java:92)
at oracle.adfinternal.rc.core.RCInstanceImpl.getConnectionContext(RCInstanceImpl.java:88)
at oracle.jdevimpl.rescat2.dockable.ResCatView.registerConnectionListeners(ResCatView.java:287)
at oracle.jdevimpl.rescat2.dockable.MyCatView.getGUI(MyCatView.java:154)
at oracle.ide.view.ViewDecorator.getGUI(ViewDecorator.java:82)
to oracle.ide.docking.DrawerUI. < init > (DrawerUI.java:301)

Then I got the message do I need to save and exit, do not save and exit and the cointinue.
When I cointinue to work, it was ok until I got close menu RUN and then get the same message.
also a get message on a few other buttons as add catalog and others.

All this was in default role,
When I run JDev in Java as it works well, but in another role of its brand this errors.

I try to uninstall then reinstall but one have nothing fact. I got the same message.
Also, I saw some changes in preferances(some options) stay after you uninstall and reinstall, I don't know why.
In an instant I saw then a file of a few cwacle.oss from the application or something like that has been altered.
I use windows7 32 bit.

And sorry if my English is not better.

Thanks for your time.

Published by: newenrba on December 9, 2010 07:59
You can delete the system folder * found in the location *%USERPROFILE%\Application Data\JDeveloper and restart the JDeveloper * & see if it helps with your problem?

Thank you
Nini

Error 244: The DataFinder cannot start due to an internal error.

I have LabVIEW 2010 and, during Windows startup, this error message appears:

"The DataFinder cannot start due to an internal error.

(244): Please wait until the National Instruments PSP Service is running and try to start the DataFinder or restart your computer. »

I got this pop error during the past year it's a recurring thing. He began to show a few months after installing the LabVIEW program on my computer, so I'm not sure on what caused this message still appears. I find that it causes also a delay in the start of my computer - my other startup applications starting to show only when I close the error window. Help, please! Thank you.

Hi xcontradictorx,

Looks like National Instruments PSP server locator cannot be started. Could go you to the control panel > administrator tools > Services and locate the server National Instruments PSP Locator? Double-click it and make sure that the service is started. If this is the case, stop and start again (just by pressing the stop and start buttons). If this is not the case, run it, and then go in the Recovery tab and choose restart the Service as long as the action of first, second and more about chess.

If after changing the settings for the PSP the issue to continue service I think that for some reason any PSP service will just be started late for some reason any. Could you do a quick real test: disable the DataFinder in msconfig, reboot, then run the C:\Program NIUninstaller Instruments\Shared\DataFinderDesktop\bin DataFinder.exe. This should place the MyDataFinder app in your taskbar (that looks like a yellow gear).

If this is successful, then we will have to change the order of startup services such as the DataFinder begins just after the service of the PSP.

Try the following:

(1) locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
(2) remove the entry DataFinder
(3) add a shortcut to DataFinder.exe in C:\Documents and Settings\All Users\Menu Menu\Programs\Startup
(4) restart

This should make all the standard Windows startup (as from services, etc.) and then launch the DataFinder.

One question: do you use the DataFinder at all? Either with DIAdem or database search tool? If this isn't the case, you can try to remove it from the startup items. Simply go to start > run... and type "msconfig". Click the Startup tab, look for DataFinder and deselect. Click on apply. That will probably get rid of the error message.

VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

The backup application could not start due to an internal error:
Server execution failed (0 x 80080005)

Vista Ultimate - trying to COMPLETE the backup of a computer

Hi people,

I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

"The file or directory is corrupted and unreadable 0 x 80070570.

I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.

1. Server error messages generated an exception 2. Internal error 0x800400FF to start Windows.

Original title: 1. Server error messages generated an exception 2. Internal error 0x800400FF

Running Win7 on Toshiba P500 SP1. During the installation of Paragon system backup 11, which allows me to designate a backup (z) USB drive, he made a full backup. Then, every time I start up Windows this program does not start with the error above, sometimes only one message and sometimes both. This program (always installed with disc manufacturers) worked fine until my C:/D: main needed to be replaced. Can anyone help?
I think that maybe a Win7 program is may be damaged.
zanadu1251

Hi Zanadu,

It could be a problem with the backup USB drive that you created by using the Paragon Software.

I suggest you to contact Paragon as it appears after taking the backup. You can check the link to contact Paragon support team:

http://www.Paragon-Software.com/support/

Let us know if you have more queries on Windows.

Cannot change the power state of VM: internal error

Hello
I freshly installed OS elementary which is based on Ubuntu.
VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:
Cannot change the power state of VM: internal error
I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.
Here is my log file
Thanks a lot for your help
PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

Hello

Welcome to the VMware community forums.

I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.
```
vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
```
If you then put the bug number into google, you get:

http://KB.VMware.com/kb/1227

Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

--

Wil

Cannot start virtual machines on Windows - get "internal error."

After restarting my computer, all the virtual machines in workstation that allows you to start now will no longer start. Currently to get the super useless error message: "Internal error." which is of course totally shameful.
I uninstalled and reinstalled, tried searching for "cpuidHash" in my registry to reset, which curiously is not there as part of the services, I tried to remove / delete the VMEM and even tried to create a new VM and start it without an operating system and all attempts to start no VM result in the same message. Also get the same error when trying to boot from VMware Player.
Key in the log error can be: "E105: PANIC: CHECK bora\vmcore\vmx\main\timeTracker_user.c:238 bugNr = 148722 '.
Any help on how to get VMware software to service is appreciated - thanks in advance!

Thank you Darius - had already tried. It turns out that this specific response of spoonalious solved my problem. Not sure what caused the problem in the 1st place, to my knowledge, nothing had changed, but after completing these steps and restart services the issue was resolved after much work. VMware software are extremely fragile and breaks easily it seems:

New host PC - VM will start is more (internal error - VMWare Workstation 11)

Thanks to Darius and spoonalious for the position of solution!

10.9.2 upgrade - failure of the "internal error" when you try to start vmware fusion

Everything worked well even after 10.9.2 upgrade and then all of a sudden, I get an internal error and cannot start.
Cause I think that lie in the osx system log: /var/log/system.log
Here are 2 mistakes of the system log which I believe are responsible for this internal error message - I need to know what they mean and how do I workaround:
These errors are generated in the system log when I click Start on the vmware fusion GUI:
Mar 21 11:07:43 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)
Mar 21 11:07:52 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)
When I run the command mdtil sudo as shown above I get:
mdutil t 25383633 [email protected]/users/UserX:sudo
/ Users/UserX/Documents/Virtual Machines.localized/CentOS 64 - bit.vmwarevm
If I try to go to this path, there is no: why there?
[email protected]/users/UserX:CD users/UserX/Documents/Virtual Machines.localized / CentOS 64 - bit.vmwarevm
SH: cd: / Users/UserX/Documents/Virtual: no such file or directory
Excerpt from saturated journal:
[email protected]/users/UserX:tail f /var/log/system.log
9: Www-Authenticate = < CFString 0x7f80854d74d0 [0x7fff7c286f00] > {content = "Basic realm ="Zimbra""}
11: cache-Control = < CFString 0x7f80854d0b20 [0x7fff7c286f00] > {content = "private"}
12: vary = < CFString 0x7f80854d7500 [0x7fff7c286f00] > {content = "Accept-Encoding"}
}
}]
Mar 21 11:07:19 UserX - macbook.local CalendarAgent [459]: [com.apple.calendar.store.log.caldav.queue] [added [< CalDAVAccountRefreshQueueableOperation: 0x7f8083cac3c0;]] [[Sequence: 0 >] missed operations.]
Mar 21 11:07:23 UserX - macbook.local iTunes [20065]: entry: _AMMuxedDeviceDisconnected, mux-unit: 99
Mar 21 11:07:23 UserX - macbook.local iTunes [20065]: entry: __thr_AMMuxedDeviceDisconnected, mux-unit: 99
Mar 21 11:07:23 UserX - macbook.local iTunes [20065]: tid:1be83 - Mux ID not found in the mapping Dictionary
Mar 21 11:07:23 UserX - macbook.local iTunes [20065]: tid:1be83 - handle cannot disconnect with invalid ecid
Mar 21 11:07:42 UserX - macbook.local vmnet-bridge [22023]: dynamic store has changed
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff80292ad800.
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff80292ad800
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: Hub 0 there is no memory allocation.
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: allocated plate rotating 0xffffff8023a9e000 hubNum 0.
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:ef:1 b: 23
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: Hub 0
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: Port 0
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: bridge-en1: dev 0xffffff80269e0ab0 80 2 media family
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: bridge-en1: detected wireless interface.
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: bridge-en1: upward
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: bridge-en1: Home
Mar 21 11:07:42 UserX-macbook kernel [0]: vmnet: VNetUserIfFree: release of userIf to 0xffffff80292ad800.
Mar 21 11:07:42 UserX - macbook.local vmnet-bridge [22023]: started bridge for 0, en1
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff8029340800.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff8029340800
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: 1 Hub there is no memory allocation.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: allocated hub 0xffffff8027238000 for hubNum 1.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:ea:6 d: 50
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: 1 Hub
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 0
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet1: attached with 1 layer of link suspension multicast memberships
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIfFree: release of userIf to 0xffffff8029340800.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: netif-vmnet1: adding Protocol 2.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet1: could not restore 1 link suspension memberships (err = 102) multicast layer
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: netif-vmnet1: SIOCSIFFLAGS: 0 x 8863
Mar 21 11:07:43 - last message repeated 1 time.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff8037443a00.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff8037443a00
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:fd:aa:70
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: 1 Hub
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 0
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 1
Mar 21 11:07:43 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff80292ad800.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff80292ad800
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Hub 8 there is no memory allocation.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: allocated plate rotating 0xffffff802c5f5000 hubNum 8.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:f9:33:34
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Hub 8
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 0
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetSetopt: link Set UP State
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff8033732800.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff8033732800
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:e5:cf:2 c
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Hub 8
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 0
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 1
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet8: attached with 1 layer of link suspension multicast memberships
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIfFree: release of userIf to 0xffffff8033732800.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: netif-vmnet8: adding Protocol 2.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet8: could not restore 1 link suspension memberships (err = 102) multicast layer
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: netif-vmnet8: SIOCSIFFLAGS: 0 x 8863
Mar 21 11:07:43 - last message repeated 1 time.
Mar 21 11:07:43 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VNetUserIf_Create: created the userIf to 0xffffff8036d95600.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNetConnect: return port 0xffffff8036d95600
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: VMNET_SO_BINDTOHUB: port: paddr 00:50:56:f0:93:97
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Hub 8
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 0
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 1
Mar 21 11:07:43 UserX-macbook kernel [0]: vmnet: Port 2
Mar 21 11:07:43 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)
Mar 21 11:07:43 - last message repeated 1 time.
Mar 21 11:07:43 UserX-macbook kernel [0]: vmioplug: support @ 0xffffff7f85625d00: Info 0xffffff7f856280a8 name com.vmware.kext.vmioplug.12.1.13 Version 12.1.13 build-1398658 to 29 October 2013 18:34:34
Mar 21 11:07:51 UserX - macbook.local CalendarAgent [459]: [com.apple.calendar.store.log.caldav.queue] [update has failed with the error: error Domain = CoreDAVHTTPStatusErrorDomain Code = 401 'operation could not be completed.] (CoreDAVHTTPStatusErrorDomain 401 error.) "UserInfo = 0x7f8083c8eac0 {AccountName = Yahoo!, CalDAVErrFromRefresh = YES, CoreDAVHTTPHeaders = < CFBasicHash 0x7f8083fa47c0 [0x7fff7c286f00] > {type = dict immutable, count = 11,}
entries = >
0: transfer-Encoding = < CFString 0x7fff7cdade70 [0x7fff7c286f00] > {content = "Identity"}
1: content-Type = < CFString 0x7f80854d11a0 [0x7fff7c286f00] > {content = text/html";} Charset = UTF-8 "}"
2: connection = < CFString 0x7f80854ee300 [0x7fff7c286f00] > {content = "keep-alive"}
3: via < CFString 0x7f80854df9e0 [0x7fff7c286f00] > = {content = "HTTP/1.1 calgate006.cal.ne1.yahoo.com (YahooTrafficServer/1.20.13 [s c f])"}
4: age = < CFString 0x7fff7c268b80 [0x7fff7c286f00] > {content = '0'}
5: P3P = < CFString 0x7f80854ee210 [0x7fff7c286f00] > {content = "policyref =" "http://info.yahoo.com/w3c/p3p.xml", CP = "CAO DSP COR CUR ADM DEV TAI PSA PSD IVAi IVDi CONi TELo OTPi OUR DELi SAMi OTRi UNRi Puhkekeskus IND PHY ONL JOINED PURE END COM NAV INT DEM CNT STA POL HEA PRE GOV LOC" "}
6: date = < CFString 0x7f8085492e90 [0x7fff7c286f00] > {content = "Friday, March 21, 2014 02:07:49 GMT"}
7: server = < CFString 0x7f8085606b60 [0x7fff7c286f00] > {content = "YTS/1.20.13"}
9: Www-Authenticate = < CFString 0x7f80854c5cc0 [0x7fff7c286f00] > {content = "Basic realm ="Zimbra""}
11: cache-Control = < CFString 0x7f80854c3e70 [0x7fff7c286f00] > {content = "private"}
12: vary = < CFString 0x7f80854c4390 [0x7fff7c286f00] > {content = "Accept-Encoding"}
}
}]
Mar 21 11:07:51 UserX - macbook.local CalendarAgent [459]: [com.apple.calendar.store.log.caldav.queue] [added [< CalDAVAccountRefreshQueueableOperation: 0x7f80854dc180;]] [[Sequence: 0 >] missed operations.]
Mar 21 11:07:52 UserX - macbook.local sandboxd [482] ([21709]): mdworker (21709) deny-read-data file users/UserX/Documents/Virtual Machines.localized/.localized (pre-plugin fstype:hfs fsflag:480 D 000 flags: 250000005E diag:0 isXCode:0 plugin:internalPlainTextImporter uti:com.vmware.vm - package - find suspect using the file: sudo mdutil t 25383633)
Thanks a lot for your time!
Best regards

I ended up doing a resumption of full time machine for 12 hours.

At least it worked.

Thanks for your advice

[Q] cannot start a virtual machine - internal error [SOLVED]

Hallo,
I installed Workstation 8 and cannot start a virtual machine - or those created those previous or new. Turn the machine gives me an "internal error."
My characteristics: Win 7 64-bit (SP1), Core i7 2600 K with 8 GB of Ram
The newspaper of vmware:
011 10 - 03 T 19: 22:38.013 + 02:00 | VMX | I120: Log for VMware Workstation pid = 3424 version 8.0.0 = Build = build-471780 option = output
2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: The process is 64-bit.
2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: Host = encoding windows-1252 = windows-1252 codepage
2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: Host is Windows 7 Home Premium, 64-bit Service Pack 1 (Build 7601)
2011-10 - 03T 19: 22:37.713 + 02:00 | VMX | I120: VTHREAD initialize main thread id 0 "vmx" host 6336
2011-10 - 03T 19: 22:37.738 + 02:00 | VMX | I120: Settings REGIONAL windows-1252-> user NULL = System = c07 c07
2011-10 - 03T 19: 22:37.738 + 02:00 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
2011-10 - 03T 19: 22:37.743 + 02:00 | VMX | I120: FILE: FileLockDynaLink: other process validation tools are: available
2011-10 - 03T 19: 22:38.014 + 02:00 | VMX | I120: Hostname = KOENIG
2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = d fe80::41: e6a3:5dd2:fa9f % 11
2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = fe80::1cf:3682:36e8:4ccb % 17
2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = fe80::1 d 80: 2f6e:979 c: b57d 18%
2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP 192.168.1.4 =
2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = 192.168.30.1
2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = 192.168.158.1
2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: HOSTINFO 1074415970 @ 3331240Hz-> 0 Hz 1000000000
2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: HOSTINFO ((x * 2518163806) > > 23) + 322527338056
2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: System uptime 321912074 us
2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: command line: "C:\Program Files (x 86) \VMware\VMware" "-s" 'vmx.stdio.keep = TRUE' "-#" "product = 1; name = VMware Workstation; version 8.0.0 =; BuildNumber = 471780; licensename = VMware Workstation; licenseversion = + 8.0; ""-@ ""pipe=\\.\pipe\vmxf3ce37cf9b6f9c3e;" "D:\VM\Windows 7 x64\Windows 7 x64.vmx".
2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
2011-10 - 03T 19: 22:38.056 + 02:00 | VMX | "I120: UI connection on pipes '\\.\pipe\vmxf3ce37cf9b6f9c3e' user (null)".
2011-10 - 03T 19: 22:38.057 + 02:00 | VMX | I120: VMXVmdb: local connection timeout: 60000 ms.
2011-10 - 03T 19: 22:38.104 + 02:00 | VMX | I120: VmdbAddConnection: cnxPath = / db/connection / #1 /, cnxIx = 1
2011-10 - 03T 19: 22:38.105 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:483]: VMAutomation: initialize VMAutomation.
2011-10 - 03T 19: 22:38.105 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:780]: VMAutomationOpenListenerSocket() to listen
2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Past vmx/execState/val of poweredOff
2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 2, newAppState = 1877, success = 1 additionalError = 0
2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 3, newAppState = 1881, success = 1 additionalError = 0
2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: VMMon_GetkHzEstimate: calculated 3411189 kHz
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: VMMon_RememberkHzEstimate: calculated 3411189 kHz
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC kHz estimates: Memoirs of vmmon 3411189, 3411189, osReported 3401000. With the help of 3411189 kHz.
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU 0 # TSC = 1100186590922
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 1 TSC = 1100186590888
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: # 2 CPU TSC = 1100186590603
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 3 TSC = 1100186590637
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 4 TSC = 1100186590948
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # TSC 5 = 1100186590906
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 6 TSC = 1100186590898
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 7 TSC = 1100186590836
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC of measured first delta 345
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC 387 min Delta
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: PTSC: RefClockToPTSC 0 3331240 Hz-> 0 to 3411189000 Hz
2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: PTSC: RefClockToPTSC ((x * 4294966339) > > 22) +-1100565306901
2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: tscOffset-1100187618517
2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: using TSC
2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: material TSCs are synchronized.
2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: PTSC current = 289960
2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Module CPUID initialization failed.
2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:869]: VMAutomation_LateShutdown()
2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:819]: VMAutomationCloseListenerSocket. Close the socket of the receiver.
2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | I120: VMX VMDB Flushing connections
2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"
2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)
2011-10 - 03T 19: 22:38.129 + 02:00 | VMX | W110: Failed to initialize the virtual machine.
I scored an error... I tried to reinstall, clean... nothing helps.
Curiously, I can use the Player app to run all VM´s without problem...
All solutions?
Thanks in advance
Marcus4Aspern

Is - the name change "vmware.exe" with something else?

AddNode cmd failed for the secondary node: internal error of AAM - agent could not start. : unknown error HA

I'm testing paths to upgrade to vSphere ESX 3.5 update 4 on an IBM BladeCenter with 2 hs21 xm Server blades; I am going through several problems, and the last is the one mentioned in the subject of this thread.
In this scenario, I've upgraded successfully vCenter then I took all the virtual machines on a single host esx 3.5, I removed the other host in the cluster, and then vcenter, then I did a new install of vSphere, I reconnected it the host to the cluster then I did all the procedure with the second node. In the end, I have two installed vSphere hosts but I had to disable my cluster HA always been, I get this error when I try to configure HA agents on the hosts, but I must say that the DRS ok works.
In the release notes for vSphere, in the section known issues, I can read:
"Upgrade of an ESX/ESXi 3.x host an ESX/ESXi 4.0 host results in a successful upgrade, but VMware HA reconfiguration may fail.
When using vCenter Update Manager 4.0 to upgrade an ESX/ESXi 3.x ESX/ESXi 4.0 host, if the host part of an AP or DRS cluster, the update succeeds and the host is reconnected to vCenter Server, but HA reconfiguration may fail. The following error message in the summary of the host tab: HA agent has an error: cmd addnode failed for the main node: internal error of AAM - agent could not be started. : HA unknown error.
Solution: manually reconfigure HA by right-clicking on the host and select Reconfigure for VMware HA. »
The problem is that of workaround does not work for me, so I was wondering if someone, is once again able to help me with this problem.
Thanks in advance for your support.

Hi Caddo,

I had the same problem with one of my hosts. It was resolved after disabling HA on the cluster and enabling again.

Mirko

Power error: internal error

I have a new installation of windows 8.1 with all the latest updates installed. Whenever I try to turn on a virtual machine, I get the error "error when switching on: internal error". I have searched the forums and tried all the suggested fixes include ensuring that the authentication service is running, when you rename the file vmware.exe and vmware.exe running as administrator. Looking through the logs, it seems that there is major permissions issues, but I have no idea how to solve. Can anyone help? I have attached the affected log files.

Hi hyjkimand welcome to the VMware communities!

What is your host system? You may need to check the updates to the BIOS/firmware for your host... He reported information of nonsense to us, which is the cause of the failure.

If you are sure that your host machine has the latest updates of BIOS/firmware applied, let me know and I'll provide a workaround solution for your system.

Thank you

--

Darius

Internal error starting the Virtual Machine after Crash

I'm in Yosemite and when running a virtual Windows 7 machine it suddenly stopped working. The beach ball slider off for half an hour and I was force quit Fusion 7. While trying to launch the virtual machine again, I get a message "Internal error" generic.
Already tried: restart my Mac, repair permissions, uninstall/reinstall Fusion 7, even try to fix the main VMDK file (it is divided and returned without error).
Any suggestions?

Looks like you run your virtual machines from a disk formatted in NTFS by using the Paragon NTFS driver. Have you tried to use disk utility to check the integrity of the NTFS partition? Error messages suggest strongly that the NTFS file system may be corrupted or there may be a problem with the NTFS driver. (I think that the NTFS driver is not available when you used the recovery environment to check disks).

If this volume extracted also OK through the disk utility first aid option, you pourriez either requires an upgrade of your driver of Paragon NTFS since version 11 to version 12 (which their Web site claims is the first version with support of Yosemite), or you may need to set the drive on a Windows machine and have windows to control its own native on the volume file system in Paragon file system audit case missing something.

See you soon,.

--

Darius

internal error of starting power

Similar Questions

Maybe you are looking for