Internal error of the View Composer. Contact your administrator. After the upgrade using VMware-viewconnectionserver-x86_64 - 6.0.0 - 1884746, I can't edit the AutomatedDedicatedComposerPool

Similar Questions

• Internal error of the View Composer. Contact your administrator.

  Hello.

  I can't create a Pool of automated office. In the last step, after I click on finish, I get a red text: internal error View Composer. Contact your administrator.

  Event:

  1 user xxxx is the creation of office with id: WinXp.

  2 error internal View Composer. Contact your administrator.

  3 VM folder/test/Personal/View/WinXP has been removed.

  This happens quickly, no more than 2 seconds.

  I can create an individual office / desktop manual pool successfully.

  Version:

  vCenter 4.1, ESX 4.1, view 4.0, XP Sp3.

  How to solve this problem? Thank you.

  Yes, the composer v. 2.0 is not supported with vCenter 4.1.

• VMware Tools error, can not download and install the tools: "internal error of the client CD (3033). Contact your system or VMware Support Administrator"

  Hello

  I installed Windows Pro 8.1 x 64 RTM with Rollup GA A on PC, after that I installed VMware Player 6.0.1 and when I tried to download and install VMware Tools, I got the following error message: "internal error of the client CD (3033).» Contact your administrator system or VMware Support. »

  How can I install these tools? Please, fix the problem with the Server CD, I need to install VMware Tools.

  I tried to download on the deposit of CDS - / www/internship/session-32/cds/vmw-desktop/player but there is no record for the VMware Player 6.0.1 version, while the Tools-windows - 9.6.0.exe.tar is a strange form, how can I install these tools in VMware Player?

  Thank you.

  Workaround solution:

  1. download the trial of VMware Workstation 10

  2. install

  3. navigate to the Program files VMware Workstation 10

  4. find windows.iso, copy to USB or transfer it to some hosting

  5. go the machine to hosts, copy on it windows.iso

  6. inside of the guest computer mount windows.iso as drive

  7 install tools

  8 restart the guest computer

  That's all

  P.S. I am very disappointed, that such large and respected company, like VMware, after almost a month, since the question has been raised cannot pay 10 minutes and fixes a bug with CD-server and allow their users to download & install VMware Tools without any problems, even if we are talking about free product such as VMware Player!

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• An error occurred during the installation of Adobe AIR 3. Installation may not be allowed by your administrator. Please contact your administrator.

  I shows that I have air adobe like installation, but I tried to upgrade to adobe 3. I get this message: an error occurred during the installation of Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator. I am the administrator. How can I solve this problem? Thank you

  Hello

  1. have you made recent changes to your system?

  See the link below and check if it helps.

  http://kb2.Adobe.com/CPS/403/kb403150.html

  It will be useful.

• Impossible to uninstall a program; error message: sorry you do not have the right permissions tocomplete this action. Please contact your administrator on this computer to continue

  I downloaded a program on the internet, but now when im trying to uninstall it is showing this error message: cannot uninstall a program. error message: sorry you do not have the right permissions tocomplete this action. Please contact your administrator on this computer to continue. What should I do please help.

  Hello

  you tell us the name of the program

  go to the website of manufacturers of programs and to find a way to uninstall

  or try this free program for her

  http://www.revouninstaller.com/

  and it is a program 'downloaded a program from the internet' search for malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Internal error in the routine mru

  Hello
  
  I have a report based on a view that is based on a table without a PK.
  I have two triggers that insert and update.
  
  I can view the report, but when I create a form for updating a line or a number of rows (tabular) it shows this error:
  
  Internal error in the routine mru: ORA-20001: error in MRU: line = 1, ORA-04098: trigger ' < schema_name >. TRIGGER_UPDATE_DESKALLOC' is invalid and does not re-validation, update '< schema_name >. "" DESKALLOC ""UNIQUE_ROWID"= value: b1, 'DESK_NO' =: b2, 'DATE_FREE' =: b3,"ATTRIBUTED"=: b4, 'ALLOCATED_TO' =: b5 where 'UNIQUE_ROWID' =: p_pk_col
  
  
  Anyone have any ideas what im doing wrong?
  
  SQL for my items-
  

  CREATE TABLE  "DESK_ALLOCATION" 
     (     "DESK_NO" NUMBER NOT NULL ENABLE, 
       "DATE_FREE" DATE, 
       "ALLOCATED" VARCHAR2(5), 
       "ALLOCATED_TO" VARCHAR2(50))

  CREATE OR REPLACE FORCE VIEW  "DESKALLOC" ("UNIQUE_ROWID", "DESK_NO", "DATE_FREE", "ALLOCATED", "ALLOCATED_TO") AS 
    SELECT ROWID unique_rowid, DESK_NO, DATE_FREE, ALLOCATED, ALLOCATED_TO
  FROM DESK_ALLOCATION
  /

  CREATE OR REPLACE TRIGGER  "TRIGGER_INSERT_DESKALLOC" 
         INSTEAD OF INSERT
          ON deskalloc
         REFERENCING NEW AS NEW OLD AS OLD
         FOR EACH ROW
  BEGIN
               INSERT INTO DESK_ALLOCATION (DESK_NO, DATE_FREE, ALLOCATED, ALLOCATED_TO)
                    VALUES (:NEW.DESK_NO, :NEW.DATE_FREE, :NEW.ALLOCATED, :NEW.ALLOCATED_TO);
  END;

  CREATE OR REPLACE TRIGGER  "TRIGGER_UPDATE_DESKALLOC" 
          INSTEAD OF UPDATE ON deskalloc
          REFERENCING NEW AS NEW OLD AS OLD
          FOR EACH ROW
  BEGIN
             UPDATE DESK_ALLOCATION
                  SET value_1 = :NEW.DESK_NO,
                      value_2 = :NEW.DATE_FREE,
                      value_3 = :NEW.ALLOCATED,
                      value_4 = :NEW.ALLOCATED_TO
                WHERE ROWID = :NEW.unique_rowid;
  END;

  in case you don't know why your trigger is not valid:
  .. .you don't have any column named value_1 value_2, value_3, value_4 to your table

• You don't have enough privileges for the configuration of the connection properties. Contact your administrator

  When you attempt to connect to the VPN Aventail I get th e following in a "Connection error" message box: "you don't have enough privileges for the configuration of the connection properties. Contact your administrator. That this connection has worked before. I suspect a MS patch for breaking it. Any help would be appreciated.

  We have solved the problem yesterday, by simply reinstalling the Aventail software.

  I spoke to network administrators and nothing had changed, so it's quite strange.

  anyway thanks a lot for your help Brian.

  See you soon,.

  Tobias

• Error: "connection denied, mechanism of connection not allowed, contact your administrator."

  Hello friends,

  I m trying to configure an anyconnect on my ASA 5555 and when I try to connect in the anyconnect client, I receive the message: "denied connection, mechanism of connection not allowed, contact your administrator."

  I try the search on the web site of Cisco and the solution was:

  This error message occurs mainly because of configuration problems that are improper or incomplete configuration. Check the configuration and make sure that it is necessary to solve the problem.

  As you can see, didn t help me. I know that there is something wrong, I Don t junt know not what.

  Thank you

  Marcio

  Hi Marcio,

  Try adding the following commands:

  tunnel-group VPN_SPO_ARTERIS webvpn-attributes

  Group-alias VPN_SPO_ARTERIS

  Then test the connection.

• Adobe AIR - will not update - error. "Please contact your administrator. There may be a problem with your SMA *.

  Former title: adobe AIR

  I disabled adobe AIR updates made, because every time he did it would download additional programs that I didn't and it was sometimes difficult to roll of them. I thought that my computer started to act funny then I changed it back to make updates and that's when it started, it will not update. * Error. Please contact your administrator. There may be a problem with your SMA *. It won't let me uninstall it even. I tried to * run as administrator * also, none of this seems to work. I talked with a technician from best buy to the cat there, he mentioned a virus, but they want, of course, a very pretty penny to help. He also told me the program or software is not crucial. I did read threw some of the suggestions that have been posted already, but a lot of it seemed to be another language for me. I'm usually not too bad with this irritable stuff, but I found it confusing. Other than that, I get actually to the point of my computer completely wiping everything and starting over.

  Installer advance user as http://www.revouninstaller.com/revo_uninstaller_free_download.html
  andthe problems with programs that cannot be installed or uninstalled

  In addition to contact
  http://forums.Adobe.com/Community/air

• VWC plugin using sdk 5.1 is broken if running on the web client 6.0 with port 9443 - out could not connect to the Web Client vSphere. Contact your administrator to resolve this problem.

  We did a vwc with sdk 5.1 plugin, now, we want to make it work on the web client 6.0. before the race, we have changed the MANIFESTO. MF and services-config. XML responses such as the following:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  After that, we deployed our plugin on web client 6.0

  If access us using the URL with port: https:// < ipaddress >: client/vsphere-9443 /? csp, our plugin arises, our plugin function is also ok.

  If access us using the URL without port: https://< ipaddress > / vsphere client /? csp, our plugin is present, the function is broken (error occurred when flex user interface by calling the java service: "Could not connect to vSphere Web Client.) Contact your administrator to resolve this problem. »).

  Thank you very much

  Please change the CHANNEL_URL in your proxy classes to use 'amf' instead of 'amfsecure '.

  private static const CHANNEL_URI:String = "/" + YOUR_MODULE.contextPath + "/messagebroker/amf"
  

  This should solve your problem.

• An unexpected error has occurred. Please contact your system administrator

  Hi all

  I created a single transaction in AR and I try to apply a credit against this transaction operation into the work table of transaction I get following error.

  Error:

  An unexpected error has occurred. Please contact your system administrator.

  We use the R12.1.3 version.

  Please help us.

  Kind regards

  Aimée

  Hi all

  Problem is solved.

  After restarting the system, we are able to apply the credit memo for transactions.

  Kind regards

  Aimée

• When I try to change an .ini file in a folder of the game in program files, Windows 7 tells me I don't have permission and "contact your administrator." Guess what, it would be me. What should I do now?

  I tried to activate the debug mode for Baldur's Gate 2: Shadows of Amn , so I go into program files, I find the .ini file that I need to change to enable the debug mode. I change it, so I try to save him. "You don't have permission to save in this location. Contact your administrator to save in this location. "I do not understand that I am the administrator of the machine! What is the problem! Please help me!

  Press the Windows key, type in Notepad, when Notepad is displayed in the list, do a right click and click "Run as Administrator". Open the file using Notepad and save after you make changes.

  While you are the admin, some features are always locked and need you to check if it is correct. What if all could do whatever he wanted this to be a problem. Confused, but safer, I guess.

• User profile service, you have been logged with the default for the system profile, please see the the event log for more information or contact your administrator.

  User profile service... Help... I'm stuck and going nowhere.

  Hello

  Whenever my user try to connect this MSG poping up to the top of any solution please.

  User profile service

  you have been logged on with the default for the system profile, please see the the event log for more information or contact your administrator.

  Click on this URL and follow the instructions 100% your problem has been resolved http: //support.microsoft.com/kb/947215

  Try it.

• I am trying to download the InDesign CS5.5 update and continue to be "Update failed" "please contact your administrator if you want to apply updates on your computer. I did this and now have administrator rights, but I still get the message. Ho

  I am trying to download the InDesign CS5.5 update and continue to be "Update failed" "please contact your administrator if you want to apply updates on your computer. I did this and now have administrator rights, but I still get the message. How to do the update?

  Direct updates
  -----------------

  https://www.Adobe.com/downloads/updates/