Similar Questions

• Clientless VPN works internally but NOT externally. Help please!

  I have set up my VPN Clientsless on one ASA 5510 firewall and to access internal (using the IP address of the firewall internall) it displays very well.

  But when I entered the external IP address of home, for example https://232.14.14.14/ , it gives you the choice of procceed or not and wjen I choose it is a secure page to procceed then I get the following message:

  Under Construction

  The site you are trying to view not currently has a default page. It can be being updated and configured.

  Please try this site again later. If the problem persists, try contacting the Web site administrator.

  If you are the administrator of the Web site and that you have received this message in error, please see "Enabling and Disabling Dynamic Content" in IIS Help.

  To access IIS help

  1. Click Startand then click run.
  2. In the Open text box, type inetmgr. IIS services manager appears.
  3. On the help menu, click Help topics.
  4. Click Internet Information Services.

  Any ideas please?

  Great, thank you!

  Now, you have two options:

  1 remove the static translation or change to another port:

  not static (inside, outside) tcp https Firewall5510_Server netmask 255.255.255.255 https interface

  2 change the WebVPN port to something else:

  WebVPN
  

  no activation outside

  port 8443

  allow outside

  So when you sign in, you go to: https://1.1.1.1:8443

  HTH.

  Portu.

• {A} N5110 INSPIRON internal speakers/headphones crackle. Help, please.

  I bought my DELL laptop just a week ago and I noticed that whenever I play music or any audio speakers sounded funny and crunches. I tried to put on the helmet, but always the same. I think it has to do with the sound card, because I tried all troubleshooting and audio settings but the problem still exists. I even tried a couple of headphones but there is no change, it still crackles. It's really annoying and at the same time frustrating.

  I have all the guarantee and received in loans, but before going to the dealer, can I do to save money to get a taxi so that it sets? Please, I need help. =(

  Jinxed.Utopia

  OK, I tried to install "Intel (R) Rapid Storage Technology" as advised in the forum, but I can still hear the sound of Choppy/jump.

  Also try disabling Net guard if you have McAfee...

  (1) open McAfee Security Center
  2) click on "Web and Email Protection.
  3) click on 'firewall '.
  4) click on "Net guard".
  (5) uncheck the box next to 'turn on Net Guard

  Disable power management systems. There may be several diagrams on a laptop, that is for the operating system, for the graphics card, audio, etc... I don't know where they are on your model.

  Check if there is one for IDT audio. Go to start > Control Panel > IDT Audio Control Panel > advanced power setting, etc.

  On some models, you can disable 'Enable Dell Extended battery dead' in the battery meter window.

  You may or may not be those that I mentioned, and there are probably others that I don't know.

  In addition, go to the properties of sound and under the control of tab "Improvements" "disable all sound effects.

• Why my up & arrow keys function changed? I didn't click something by accident? Help please?

  Why my up & arrow keys function changed?
  I didn't click something by accident?
  Help please?

  (My new kitten * power have stood on something on my keyboard - it has done this before and put the mode full-screen, but I managed to fix this)

  Normally, I scroll a web page a little at a time using the down arrow on my laptop keyboard key. Since yesterday, when I press the arrow down, the page jumps to the bottom (like pressing PageDown) and arrow high jump all the way to the top.

  How I put it back so that it scrolls a little while I press the button?

  Hello Lancs, please press F7 to leave caret navigation mode - then the behavior should be back to normal...

• Help, please! Connected to the VPN, but cannot access internal servers.

  Hi friends,

  I'm a newbie on vpn stuff, I set up a base on a Cisco ASA 5505 vpn by using ASDM, and I was able to connect to it.  However, I can't ssh or RDP to one of the servers in the House after that I connected to the vpn.  Here is the configuration.  Help, please!

  ASA Version 8.2 (5)

  !

  hostname sc - asa

  domain abc.com

  enable the encrypted password xxxxxxxxx

  xxxxxxxxx encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address dhcp setroute

  !

  passive FTP mode

  DNS server-group DefaultDNS

  domain OpenDNS.com

  sc-pool_splitTunnelAcl-list of allowed access standard 192.168.1.0 255.255.255.0

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.1.96 255.255.255.240

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  interface ID client DHCP-client to the outside

  dhcpd outside auto_config

  !

  dhcpd address 192.168.1.5 - 192.168.1.36 inside

  dhcpd dns 208.67.222.222 208.67.220.220 interface inside

  rental contract interface 86400 dhcpd inside

  dhcpd abc.com domain inside interface

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL encryption rc4 - md5, rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1

  WebVPN

  abc group policy - sc internal

  attributes of the strategy of group abc - sc

  value of server DNS 208.67.222.222 192.168.1.3

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value abc-sc_splitTunnelAcl

  field default value abc.com

  a001 xxxxxxxxxxx encrypted password username

  a002 xxxxxxxxxxx encrypted password username

  username a003 encrypted password privilege 0 xxxxxxxxxxx

  a003 username attributes

  Strategy Group-VPN-abc-sc

  a004 xxxxxxxxxxx encrypted password privilege 0 username

  a004 username attributes

  Strategy Group-VPN-abc-sc

  a005 xxxxxxxxxxx encrypted password username

  a006 xxxxxxxxxxx encrypted password username

  username privilege 15 encrypted password xxxxxxxxxxx a007

  remote access to tunnel-group abc - sc type

  attributes global-tunnel-group-abc - sc

  address sc-pool pool

  Group Policy - by default-abc-sc

  tunnel-group abc - sc ipsec-attributes

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:e7df4fa4b60a252d806ca5222d48883b

  : end

  Hello

  I would suggest you start by changing the pool VPN to something else than the current LAN network and see if that helps

  These should be the configuration required to achieve this goal

  • First remove us pool setup VPN VPN
  • Then we delete the VPN Pool and create again with an another address space
  • When then attach this new Pool of VPN again to the VPN configuration
  • In the last step, we add a NAT0 / exempt for this new pool VPN NAT configuration and remove the old ACL line for the former group of VPN

  attributes global-tunnel-group-abc - sc

  no address-sc-swimming pool

  no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0

  IP local pool sc-192.168.100.100 - 192.168.100.110 mask 255.255.255.0

  attributes global-tunnel-group-abc - sc

  address sc-pool pool

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.100.0 255.255.255.0

  No inside_nat0_outbound access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.1.96 255.255.255.240

  -Jouni

• I am installing a seagate 500 GB internal hard drive, when I go to disk management, the drive is there, but I can not format because you know not initialized. can anyone help please

  I am installing an internal hard drive 500 GB seagate on my computer, when I go to disk management, the drive is there, but I can not format because it is unknown / not initialized. can anyone help please

  Try one of the two utilities below to partition and format the drive.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, restore Partition after an accidental deletion, convert partition, Explore, Hide partition partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To achieve any task using the "Operations pending" box at the bottom or top left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASEUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/personal.htm
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• Help, please! to stop the animation of a symbol of the stadium or anover

  I'm not a specialist of jquery, but I had to deal with it. And have some expirience... But I can't do a basic thing along the busy, I guess. So, help me please!))

  I need to stop certain symbols of the child of the chronology of the symbol of the parent (or stage). The chronology of the scene, I have trigger. Currently, all child clips must stop as a...

  I'm trying to insert into the shutter button, copy the following code:

  (child clips names: 'stan', 'bizan', 'bak')

  var stantostop = sym.$("stan");
  stantostop. Stop();

  var bizantostop = sym.$("bizan");

  stantostop. Stop();

  var baktostop = sym.$("bak");

  stantostop. Stop();

  and I'm sure, I'm doing something wrong (!), cause, nothing changes.

  If you can't help, please advice me some source with many examples of typical operations and commands like this! So thank you for reading!

  Hi, Strashevsky-

  You don't need to refer to the object jQuery if all you want to do is stop the timeline.  You can simply do:

  sym.getSymbol("stan").stop ();

  OR

  var stantostop = sym.getSymbol ("stan");

  stantostop. Stop();

  Hope this help get you pointed in the right direction!

  -Elaine

• He can't change the region of my account! Help, please! Thank you ~ ~ ~

  Hello

  I want to change my account area. But I still balance ($0.02) so I couldn't change. Please delete my balance.

  Thank you!

  and now I can not contact the Apple Support it's always show

  We're sorry.

  We are unable to respond to your request at this time. Please try again or come back later.

  1c14bb55-ED82-4B43-9c22-fc79914a022c

  is could someone please help me contact the apple support to clear my balance or help me another way to change the region on my account please!

  Thank you!!

• When I scroll a certain Web page, browser reloads the page upward, this happens even if I change the browser... Why? Help, please!

  When I scroll a certain Web page, browser reloads the page upward, this happens even if I change the browser... Why? Help, please!

  
  

• Hello. I want to change my country of the Jamaica, to the United States but the United States offers none as payment option. I just want to try the new Pokémon go app that is not available in Jamaica. Help, please

  Hello. I want to change my country of the Jamaica, to the United States but the United States offers none as payment option. I just want to try the new Pokémon go app that is not available in Jamaica. Help, please

  Unless you are in the USA, expect it to be available in Jamaica. People can not download content from iTunes Store from another country; This is why it is not an option for you.

  (143448)

• Watch is now no paired phone. The watch displays now wrong password, which must be changed on the phone.  However, given that the watch is more matched with the phone, I can't the available option to change the password.  Help please!

  I have a watch that has become not matched with the iPhone with it's Setup.  It is locked with a password and the dial of the watch indicates "Wrong password" and I have to open the App to Apple Watch on my phone to re - activate the entry of access code and try again.  However, the iphone has stated that on the phone became not paired with the watch, so I can't do anything, there is no option to change the password and I can't pair the watch with the phone because it is locked.  This is my boss's phone... Help, please!

  If you have forgotten the password for your Apple Watch - Apple...

  < edited by hosts >

• Help! I need to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting on my phone, I need to change? Help, please

  Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please

  You will need something like that and a micro USB to USB cable

  http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter

• Can anyone help please? I think of web page has changed all of a sudden. Everything is listed on the left side of the screen and appears to be in a basic format.

  Can anyone help please? I think of web page has changed all of a sudden. Everything is listed on the left side of the screen and appears to be in a basic format. I run XP and use Firefox 9.0.1.
  Thank you...

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• How to save a password changed in Firefox? I rescued him, but then I changed the password and it doesn't give me an option to save the new password. Help, please. Thank you!

  How to save a password changed in Firefox? I rescued him, but then I changed the password and it doesn't give me an option to save the new password. Help, please. Thank you!

  The Web site may use autocomplete = off to prevent Firefox to record the name and the password.

  You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• Since the changed my user name andpassword icoud and apps still insist on using my od username. Help, please

  Since the changed my user name and password, icloud and apps still want to use my old user name and cannot use them to download updates or anything like that. Help, please.

  mini iPad 9.2.1 update

  Log out of your account version (for example on this type in settings > iTunes & App Store;) Settings > iCloud > Sign Out) and back with the version update of your account: what to do when you have changed your Apple ID email address or password - Apple support