Internal mic has stoped working

Similar Questions

• Satellite L300 - 2CL - built in mic has stopped working

  Hello

  When I bought this computer (sep-09) everything worked fine. Then in March (I hade it idle for some time), my built in mic has stopped working.

  What eles is fina, and I scanned the Web for solutions and tried to install the new drivers, unistall them, all possible boots, disabel and restart, but at most I just get a static sound of my recordings of test.

  I use win 7 home pre, but the problems started when I was with Vista. Now, I am of ideas, and my friends on Skype develops enough not to hear me.

  Is that what I can do to get the microphone working, or should I buy a headset?

  Grateful for help
  Hugo

  Hi mate

  To be honest, I would use a helmet because helmet still provides a better speak of quality.

  But the internal MIC is part of the webcam and the microphone is controlled by the software of webcam too.
  Please launch the webcam software and go to settings.
  Then, choose Audio tab.
  Here, you must increase the volume to maximum.

  Welcome them

• Bluetooth in satellite C660-10V has stoped working

  Hi, my bluetooth has stoped working for a week.

  Time I changed my internet modem rather USB adapter, I can't reactivate my bluetooth.
  On my screen is the message of our Lady: "interface power supply is cut off.
  Its imposible to turn it on, by the function key + F8 does not work 'Bluetooth Wizard.
  In a Deputy bluetooth option is shown 00:00:00:00:00:00 to address equipment.

  Please help me with this problem.
  Marcin

  When you use the key combination FN + F8 is BT option available or not?
  If so, what happen when you try to activate the BT?

  To be honest I don t understand what you did exactly.

• Skype has stoped working error

  every time I start Skype after 3 seconds it come with one Skype has stoped working error and stops at Skype.

  Please help solve.

  Name of the failing application: Skype.exe, version: 7.6.0.105, time stamp: 0x559165ab
  The failed module name: ntdll.dll, version: 6.1.7601.18869, time stamp: 0 x 55636317
  Exception code: 0xc0000005

  DxDiag crashed into Direct3D:

  DxDiag previously: crashed to Direct3D (step 2). Re-run DxDiag with the command line parameter 'dontskip' or choose to not to ignore when you are prompted to collect information could result in DxDiag getting this information

  The problem with the installation of the driver ATI Mobility Radeon HD 5470. Reinstall this driver:

  https://www.Sony.co.UK/support/en/content/CNT-DWNL/PRD-comp/EP0000230054_5505/VPCEC2S0E

  Search other updates of the driver available too:

  https://www.Sony.co.UK/support/en/content/CNT-DWNL/VPCEC2S0E/list#OS1

  It may also be necessary to uninstall the applications of virtual video capture ManyCam and Dxtory.

• The touchpad scrolling has stoped working on satellite

  The touchpad scrolling has stoped working.
  I restarted / reinstalled the driver / reformatted hardrive 3 times (this works but the feature soon stop) / sytem restore / disabled firewall /?

  Can anyone help please it is really annoying me for the first time I'm having a problem with this machine that really gets to me.

  And what satellite you have? Is - this new model of notebook with touchpad buttons?

• Equium A60 freezes - driver graphics card has stoped working

  Hello everyone, my A60 keeps freezing and a message appears saying that the ATI driver has stoped working properly it causes the screen to go really big and have a very low resolution. When I turn it on a blue error message and I have to put in safe mode so that it works, Ive downloaded the ATI driver and who is not worked, Ive used the recovery disc to clear everything and start over, but that is not worked,

  any1 has any other ideas? THANKS FOR YOUR HELP EVERYONE

  Marc

  Post edited by: marcisaacs

  Hello

  You should not use the ATI graphics driver because this driver is not designed for the use of the laptop. Toshiba recommends to use own graphics drivers because these drivers are specially designed for the use of the laptop.

  However, after getting the procedure books should work properly. If the failure occurs after this procedure again so I guess it must be something wrong with the hardware (graphics chip)
  I don t think you will be able to solve this problem yourself.
  In this case, you must contact the Toshiba ASP.

• HP QuickTouch screen has stoped working

  HP QuickTouch screen has stoped working

  Have you checked Support HP?

  http://WWW8.HP.com/us/en/support-drivers.html

• When I turn on my Lexmark printer, I get a message saying that the host process (Rundll32) windows has stoped working

  I had trouble trying to use the system scan on my Lexmark printer. I have uninstalled & reinstalled the all-in-one Lexmark & now I get a message saying windows (Rundll32) host process has stoped working. Please can you help solve this problem.

  Concerning

  P. J.

  Hello

  1 did you change on your computer?

  I suggest you to follow the links and check out them.

  Method 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to contact Lexmark printer and check.

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

• "display driver has stoped working, but was recovered" and then shuts down the system. "

  I have a problem with the opening of my yahoo email because my computer just Bonnac outside and flashes once or twice and says "display driver has stoped working, but was recovered" then shuts down the system. " Itsriving crazy me :(     (I have windows vista & pentium bicoeur.)

  This means that there is a problem with your graphics card. I suggest that to update your Windows and check of course latest service pack installed. Also check Windows problem and Solution Center and see if everything suggested installation listed there. It can make it appear to update your graphic card.

  If this isn't the case, try looking in the card of your gaphic provider or your PC support Web site to update its driver.

• My computer keeps telling me that my display R300 driver has stoped working, but has recovered.

  original title: my computer tells me that my display R300 driver has stoped working, but has recovered. What is a R300 display driver and how can I solve this problem?

  This happens often when I look at the videos on YouTube

  Hello LightningPurple,

  This problem may occur if the display on your computer driver does not work. I suggest that you update the drivers for your video card and check if you have the same problem. You can see the underside of section which will give you information on how to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• msexch4032.exe has stoped working

  msexch4032.exe has stoped working

  Crashes IE and FF all the time.

  TX for all people of the aid: to correct the issie I had to reset the router and things are back to normal.

• R300 display driver has stoped working, but has recovered.

  My computer keeps telling me that my display R300 driver has stoped working, but has recovered. What is a R300 display driver and how can I solve this problem?

  Have you recently updated your drivers, possibly through msupdate?

  If so, or in any case, your site of PC makers, specific to your model and updating your graphic driver

• audio on pavilion dv7 notebook pc priduct # A6X02UA #ABA has stoped working after bios update

  Audio has stoped working

  Hello

  Try the following.

  Download the installer of IDT Audio relevant links below and save it in your downloads folder.

  IDT Audio Installer - Windows 7.

  IDT Audio Installer - Windows 8.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Giraud has stoped working

  Hello

  whenever I start my laptop it keep telling me "Giraud has stoped working". ". Please how do I rectify this?

  You must enter the Windows features and disable Microsoft .net Framework 3.5.1, and then restart the machine and turn it back on again for a new installation.

  Click Start or press the Windows key and type features but do not hit Enter. Find Windows turn on or off features in the list above and click on it. Once the Windows features dialog box opens and fills itself (may take a few seconds), search for Microsoft .net Framework 3.5.1 and uncheck the box. Click OK in the lower left corner and leave the machine to uninstall this package.

  Restart the computer and go back to the Windows features dialog box, where you turn you Microsoft .net Framework 3.5.1 . Your Giraud errors should stop appearing.

• BaseCamp application has stoped working

  I've been running BaseCamp program for working with my U.S. 24 K topographic maps for over a year and it just stopped working, windows says BaseCamp application has stoped working, Event viewer can come with the snap-snap-in law so I cad see errors.
  Operating system: Windows 7

  Hello

  Method 1: The clean boot, check to see if the program works or not.

  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Method 2 : uninstall and then reinstall the application of Base Camp program and check if the problem persists.

  Uninstall or change a program

  http://WWW8.Garmin.com/support/download_details.jsp?id=4435

  Hope that helps.