Internal microphone brand new TouchSmart 300 does not.

Similar Questions

• brand new wx350 flash does not work.

  I know how to put flash, but in the habit of work.

  Hello, vinniefono!

  I'm sorry to hear about it!

  Have you tried the steps in the following link?

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/43072/p/40096, 40097,40555, 92430/c/65,66/kw/built-i...

  If you have tried all the steps, and the flash still does not work, you can try to reset the camera. Steps on how to reset the camera are provided in the link below:

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/39713

  If you have tried all the steps and you have reset the camera and the flash still does not work, your new Sony camera may be defective and requires service.

  But because the machine is new, it is still under warranty! So, I think that Sony will replace the camera with a new one for you, or fix it for you, if it is indeed defective! (most Sony products come with a standard warranty of one year)

  Sorry for the inconvenience!

  Best regards

• Brand new 32Gig touchpad does not load

  When the touchpad is connected to a wall outlet with the original cable and plug, the Touchpad indicates that the input current/voltage is not sufficient and the touchpad can not load correctly. Well, it does not load and I unscrewed and screw such upward as mentioned in another post, but it does not work. I also used a different cable and another wall charger (my phone update from samsung, the lable of voltage/current seems to be the same) and I get the same message.

  I have hard reset a couple of times, and it does not help.

  Is there anything else I can try? Is this touchpad a dud? Too bad I don't think I'll be able to get another one as it is out of stock everywhere.

  Well, I had the problem figured out. I chatted with support yesterday (almost 45 minutes), tried all sorts of things and nothing worked. They suggested that I come back to Best Buy and ask them to check it out. Same thing was going on there. They changed the Chargers and same problem. In the end, they tried a different cable and voila, it started to load.

  I have although the cables are either it works or it doesn't work, but apparently the USB cable can still send a signal, but maybe not enough amperage. They had no more keys to touch to swap and no cable to give me and suggested I buy one, but I wil see if HP here will be able to help. I'm sure they are good markets at monoprice in the worst cases.

  I hope this helps someone else, problems with their touchpad not charging / not turing on.

• Brand new Photosmart 7510 does not connect to Web Services

  Nice day! I am trying to solve a problem for a customer and I hope that someone can help you. I found a couple of other discussions with the people affected by this problem, but the solution did not help. My client has a Photosmart 7510 is all new and it made me get setup for him. The printer is configured, connected to its wireless network, the software is installed on his PC 3 and I can print of each of them. However, we are not able to activate the Services Web is a key reason that he bought the device.

  When we try to turn on Web Services, the printer successfully checks for an update (none are available) but then times out during the server communicating with Web Services... scene. I get the same result if I try to activate Web Services via the printer, thanks to its web Interface or via the installer driver on a PC. Depending on the Network Configuration Page, the printer is properly take an IP address (including DNS) from the router. I tried to set an IP through the web INTERFACE as well by changing the DNS servers 8.8.8.8 and 8.8.4.4 with no improvement. I tried power cycling router of my client and I also tried setting the parameters of encryption on the printer manually instead of using the automatic mode. All computers, my laptop and iPad can use Internet very well, but Web Services will not be activated on this printer.

  Is there any other suggestions that I can try? Is it possible that Web Services are just down right now? This particular unit is defective? My client bought this partially to access ePrint impression from his iPad, so it is essential we get active Web Services. If anyone can help, I would be very happy. Thank you!

  Hello PXAbstraction,

  The servers are being updates not scheduled at this time.  The best thing to do is to wait 1 to 2 hours at least and to 24 hours, then try again.  If this is not enough, let me know and I'll see what I can do.

• RT News showing extension does not then update to version 40.

  I have re-installed the latest version and new RT extension does NOT appear where the other extensions (for example, ABP) appear.
  Is returned to the 39.0.3 Version and it is very good.
  Of course, there is a bug that needs fixing.

  An updated version of the - https://addons.mozilla.org/en-US/firefox/addon/rt-news/ - has been released and now works in Firefox 40.0.3.

• CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.org/KB/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

  New iPhone IS does not work with MAC Mini 10.6.8. Apple support says upgrade your iTunes. Its the wrong color icon. WHAT? iTunes is the last 11.4 for my mac. All my music is on my Mac. Help!

  That is right. The requires iTunes 12.3.3 and in order to get it, you will need to update OS X to El Capitan. That's how Apple has created for better or worse, I'm sorry.

• In fact, I need help but can't find the answer. Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as

  In fact, I need help but can't find the answer.
  Please... Lately when it is open a new tab it does not open with a blank page. I don't want to put my home page as empty as when I open Firefox, it automatically load my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
  Thank you.

  [Personal information deleted by the moderator. Please read the guidelines and rules of the Forum, thank you.]

  Hello, please refer to customize the page new tab to turn off the function.

• When I click on the new tab, new tab button does NOT open.

  When I click on the new tab, new tab button does NOT open.

  Please update your browser Firefox 3.6.24 or 8 and check

  • getfirefox.com

• Why my new tab key does not work?

  When I click on the sign more to get a new tab, it does not so I have to open a new window in mozilla if I want to look at several Web sites at the same time. I restarted my computer several times and it did not help. I would be grateful of any advice that anyone has, and I prefer to work with a browser open and have access to several tabs. Also, if I click a link on a Web site that will open a new tab, but I can't open a by clicking the sign more or new tab by clicking on the menu drop down.

  Ask Toolbar can cause this problem. Uninstall it.

  • http://support.Mozilla.com/en-us/KB/uninstalling+Add-ons
  • http://support.Mozilla.com/en-us/KB/cannot%20uninstall%20an%20add-on

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• The new tab key does not work.

  The new tab key does not work when I click it. I reinstalled FF but with no luck - any suggestions would be appreciated.

  What can a problem with the Ask.com toolbar (Tools > Modules > Extensions)

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Travel regions of Australia to New Zealand, which does not have the licenses for TV shows, will be my TV shows that I bought in Australia removed once I have change of regions in New Zealand?

  Travel regions of Australia to New Zealand, which does not have the licenses for TV shows, will be my TV shows that I bought in Australia removed once I have change of regions in New Zealand?

  N ° save them anyway.

  (138403)

• My brand new ipod touch will not sync with itunes. It says I have to update the software, but it is already updated on itunes and the ipod.  Help!

  My brand new ipod touch will not even appear on itunes. It says I have to update the software, but it is already updated on itunes and the ipod.  Help!

  What version of iTunes you have?

• The button create a new paragraph style does not work for me, is this a bug or something stupid I did?

  The button create a new paragraph style does not work for me, is this a bug or something stupid I did?

  Pages on El Capitan 10.11.1 v5.6.1.

  I just created a quote indented using ITC Garamond Book Italic with left and right margins altered. Well selected, I clicked on the + symbol in the paragraph, named the new Styles pop-up style Indented quote and you press return.

  Always selected in the body of the document, I applied the body paragraph Style to restore the normal formatting and then with the text again, the paragraph of citation Style indented - who worked as expected.

  If you want that your new Style of paragraph to survive across documents, you will need to save it in a model. You can also have two different Pages, documents open in Pages v5.6.1, and copy/paste the custom styles between the selected text in these documents by using the Format menu.

• New windows program does not open in front

  I'm having a problem with Windows 7 not allowing not new programs that I begin to open at the front.  This happens not all the time.  Most of the time system works very well, but I've noticed when I have several windows open with several programs all running at the same time, he decides to take action and new windows will not open in front.  I have an external display connected to my laptop Dell Precision.

  When this happens, I notice Outlook seems to be dominate what he won't let any other window open in front of him, so I have to in order to see the other windows.  My Adobe programs do the same thing, IE. Photoshop, dreamweaver, illustrator, etc.

  When it happens, I also tried the option tab of the window to scroll through open windows and select the one that I would have in mind, but even if I can scroll through windows, when I stop and select the window I want to work on, he won't come to the top.  It's VERY frustrating when I work and a small window opens behind the window, I'm working on and I can not select the prompt window so it freezes ultimately my job because I can not move the program window, because an open window that I can't get to.  Is an example, you are working on a file and you want to save, you click on save and the dialogue window opens behind, asking where to save it to.  You can't get to the prompt window so you cannot tell him where to save it and can not minimize the file you are working, therefore, stop the entire program, hoping that it backs up automatically and pick up then from there.

  When this happens, the only way I can fix it is to restart my computer.  I tried settings regedit to fix it and those who did not.  Any help would be appreciated.  It is difficult to diagnose the problem, as it rarely happens so I can't recreate the environment in which he begins the questions.

  Hello

  Please contact Microsoft Community. I understand most of the time when you open a new program it does not appear at the top of the screen. This can happen due to the entriesor of incorrect registry due to corruption in the system of Windows. file So I will help you solve the problem. So I will help you solve the problem.

  Please follow the steps mentioned below:

  Step 1:
  Start your computer in a clean boot because it allows to start the computer with the minimum set of drivers and startup programs and check if that helps. See the link below to run clean boot: 
  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135  
   
  Note: After troubleshooting, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Step 2:

  Check the registry settings if there are all variations of the default value , change default and check if the problem is resolved:

  1. Press Windows + R, type regedit in the box open called to run and click on ok.
  2. Open the key: HKEY_CURRENT_USER\Control Panel\Desktop.
  3. Now in the window of the registry editor in the pane right, you will find the keys to the foreground Flash Count and foreground Lock timeout.

  Check out the links below and check the default values on your computer. Check if you have the same values as shown in the links below:

  ForegroundFlashCount

  http://TechNet.Microsoft.com/en-us/library/cc957205.aspx

  ForegroundLockTimeout

  http://TechNet.Microsoft.com/en-us/library/cc957208.aspx

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  If the problem persists, then move to step 2.

  Step 3:

  Let flow Sfc and check as it helps to find corruptions in Windows system files and restore corrupted files. Please visit the below mentioned link to run sfc:

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Hope this information is useful. Please get back to us for assistance.