Internal software error PrE11 burn to DVD

Similar Questions

• Continue to receive the Error Message: internal software error: internal software error: line 332

  Try to burn a DVD and I get an error message. The full message is:

  internal software error: / Volumes/versions/Amawat/Main/XcodeProjects/AuthorCore /... /... / Ulator/TitlePlanner/CVOBUPlanner.cpp Sonic, DVDCreator, FormatLib, Vob, line 332

  Don't know what that means. Was working fine this morning, came back and kept getting the message. I even got a new project from scratch and rebuilt everything and still get the error message.

  Help, please.

  What version of yet?

  The chapter on each other or too close to beginning or end markers?

  Several videos on a timeline?

  If this isn't the case, you use the dynamic linking?

• Internal software error in PE9

  Hello

  I'm trying to 'share' a project.  I'm looking to make a DVD.

  I'm not having much luck.  Whenever I hit the button burn the following series of events takes place:

  It seems succesfully encode media because once this process is at 99% for a few moments, he goes to the media of compilation.  At the moment where he is compiling media he recorded 95%.  It takes a few minutes to up to 99% and then I get the following error:

  Internal software error: vobulator\blockplanner\block planner.cpp, line 215

  Anyone have any idea what this means and if yes, how can I solve this problem?

  Some information:

  The file is large (at least compared to what I usually do)-55 minutes of mpeg2.

  My computer description is:

  Dell Studio XPS 435MT

  Intel Core i7 processor

  920 @ 2.67 GHZ

  8 GB Ram

  64 bit

  Thanks for the help!

  Try initially "burn folder" to see if it's PRE or a problem with your burner or media.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• internal software error: Vobulator/BlockPlanner/BlockPlanner.cpp, line 217 creating menu

  I'm doing my DVD menu, but when I try to preview, it gives me the error message: "internal software error: Vobulator/BlockPlanner/BlockPlanner.cpp, line 217".

  I can't build my DVD either because of this.

  This happens only when I add an image to a submenu page.  My main menu has a picture about this and he isn't wasting, but when I have another menu page which is linked to the home page and add the image about it, it gives me this error code.

  Someone at - it tips?

  Looking at this post (Re: internal software error:.\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217 ) in the thread you point, here's what I think is happening in your situation. Note that there are other issues that take this same error, particularly in slide shows.

  When you use a fixed image for a menu background, it goes in the background layer in the psd.

  When there is a video (bottom of movement), still replace the background with video layer.

  The query tab has a place for video and audio. If you put an image (jpg, for example) in the option video, apparently, when still calls, it throws this error.

  Your workaround solution, create a video out of the still image, will work, but all you have to do is change the menu in photoshop and add the image instead of the bottom layer.

• Internal software error of LabVIEW FPGA Module - 61499

  I get the error next (in a pop-up window) in the phase of sompilation for the FPGA target with a vhdl IP. This error continues to occur even after restart LabVIEW and the PC. Someone at - it solved is this kind of problem before without having to re - install the software?

  Here is the error information:

  Error-61499 occurred at niFpgaXml_GetValue_String.vi<><><><>

  Possible reasons:

  LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has occurred. Please contact National Instruments technical support on ni.com/support.

  Additional information: lack the tag required XML (/ CompileServerList)

  As a first step, I can compile the vhdl IP node successfully. However, once when I'm running a VI with the FPGA, the bureau stop working. After that I restarted by force, it cannot perform the build of a vhdl IP node. Even without connecing to the jury of LabView, he pointed out errors before the end of the sompilation.

  Interestingly, the screw which also includes nodes IP vhdl that I properly compiled before, I can still run the VI to the Commission and it works correctly.

  Thank you

  Looks like your ActiveJobsList somehow has been corrupted. I saw occur when computers are hard stop or blue screen during compilation. I don't have that LabVIEW 2014 installed on my machine, so your path will be a little different, and the file extension will be a .txt or .xml instead of .json, but try this:

  Move the file "C:\Program Files (x 86) \National Instruments\LabVIEW 2014\vi.lib\rvi\CDR\niFpgaActiveJobList.json" (or your equivalent) out of the above directory (back it upward and delete essentially) and restart LabVIEW. Must regenerate the file and resolve the problem.

• An internal software error occurred. Error code 8. LabVIEW: File permission error.

  I just changed a few contasts to controls in an FPGA core program, so there need to be recompiled.

  but it after compiling the program showed the error.

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:

  Error 8 has occurred to copy in nicrio_StockOutputVhdlAndInstantiation.vi-> nirviGetInstantiation___cRioStock_io.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi-> nirviGetInstantiation___nirviEIOImplementation_modGen.vi.ProxyCaller

  Possible reasons:

  LabVIEW: File permission error. You do not have the correct permissions for the file.
  =========================
  NOR-488: Error detected DMA hardware.

  C:\NIFPGA86\clntTmp\TensionCo~65_FPGATarg~A7_FPGABase~A1_eogs1jH0~18\Crio9426IoNode.vhd

  Ca person the reasons for which he showed an error.

  

  Hello

  I have a few questions,

  1. If you redefine your controls with constants, that you always get the same behavior?

  2. what equipment you try to deploy to? If it's a cRIO, have you formatted your controller and reinstalled the software for it?

  3. I did a little research and it looks like a potential problem may be with firewall/antivirus. Here is the document that explains that:
  http://digital.NI.com/public.nsf/allkb/D8D46FD4DBD1015786257540003B2DC6

  You have an antivirus installed on the computer? You can try to disable it and rebuild the bitfile?

  Kind regards

• LabVIEW FPGA: An internal software error in the LabVIEW FPGA Module has Unknown

  Sir/Madam,

  Note Labview 2012 SP1 installed about 2 weeks ago.,.

  Accident occurred during the compilation of an fpga vi who worked satisfactorally in the past.

  When I restarted and went to the message recomplile "LabVIEW FPGA: an internal software error in the LabVIEW FPGA Module" see attached picture of popup.

  I reinstalled Labview in its entirety and backed out the changes I made to the vi but still get the same message.

  Thanks in advance

  Daryl

  It turns out that the question was in the VI and not of LabView FPGA module as the message may indicate. I created a vacuum vi, cut and pasted items in this from the vi error and recompiled and it ran very well.

  Somehow the vi has been corrupted internally.

  Thank you it's fixed.

• Status code: internal software error-223091 occurred in the DSA software. Please contact National Instruments support

  Hello

  I work with card 4461.

  When writing the data on the card I get this error

  The channel which has been set up had

  Update rate: 9210

  None of the samples: 87643

  Sample mode: finite samples

  Sync: Synchronization with AI0 even of the same device

  The values lie between 6 V and 1 .2V

  error occurred in the function .

  {Message of error =-223091 = "internal software error occurred in the software DSA. Please contact National Instruments Support.\n\nTask name: Magnet\n\nStatus Code:-223091 "}"

  The Stack Trace:

  «to nNIMSSAIL100.StatusObserverT<><>otNetApi > >.» CheckWithName (StatusObserverT<><>otNetApi > *, tCaseInsensitiveBasicString\\,_STL::allocator\\,nNIDMXS100::tLocaleConsideringWideStringComparitor\\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName) \r\n

  to nNIMSSAIL100.StatusObserverT<><>otNetApi > >. Check (StatusObserverT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.StatusObserverWrapperT<><>otNetApi > >. Check (StatusObserverWrapperT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.WriteotNetApi >, class nNIMSSAIL100::AnalogWrite, double > (tTask *, Double *, UInt32, UInt32, UInt32, Double, Boolean, Boolean, tScaledDataFormat, StatusObserverT<><>otNetApi > *) \r\n

  to nNINETAI2005100.Write1DotNetApi >, class nNIMSSAIL100::AnalogWrite, double, double, cli::array^ > (task task, Double [] buffer, UInt32 numChannels, UInt32, UInt32 numSamples lines, Double timeout, Boolean autoStart, Boolean interlace) \r\n

  at NationalInstruments.DAQmx.Internal.AnalogSingleChannelWriterImpl.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  at NationalInstruments.DAQmx.AnalogSingleChannelWriter.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  Project.Analog1ChannelWriterTask.Write (Double [] data, Boolean AutoStart) in C:\\Project\\AnalogWriterTask.cs:line 446\r\n

  to Project.HardwareIO.WriteAO (Double [] Data, Boolean AutoStart) in C:\\Project\\HardwareIO.cs:line 120\r\n

  at Project.DataAcquisition.RunAcq (C:\\Project\\DataAcquisition.cs:line 182\r\n)

  at Project.DataAcquisition.Run (C:\\Project\\DataAcquisition.cs:line 68\r\n)

  at Project.Program.ThreadFunction (C:\\Project\\Program.cs:line 47\r\n)

  at System.Threading.ThreadHelper.ThreadStart_Context (Object state) \r\n

  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state) \r\n

  to System.Threading.ThreadHelper.ThreadStart ().

  TargetSite:

  {Void nNIMSSAIL100.StatusObserverT<><>otNetApi > >.} {CheckWithName (nNIMSSAIL100.StatusObserverT<><>otNetApi > *, nNIDMXS100.tCaseInsensitiveBasicString\,_STL::allocator\,nNIDMXS100::tLocaleConsideringWideStringComparitor\, nNIDMXS100::tLocaleConsideringWideStringCaseForcer > *)}

  I am using VS2005 c#

  Please tell me what wroing

  Kind regards

  Alok dandois

  Hey Alok,.

  This error code means that the revision of the map is more recent and not yet supported by the driver.  That the release of new versions of the same map with new features, the ID usually changes requiring a new version of DAQmx.  Try upgrading to the latest version of DAQmx and try again.

  While you're there.  See if you can find the product ID located in Device Manager (if you are using Windows).  Once in the Device Manager, right click on the device and click Properties.  Go to the Details tab, and then copy the entire string that is displayed under "Device Instance Id".  It should look something like PCI\VEN_xxxx & DEV_xxxx...  Paste in a reply in this thread can I be sure of your problem.

  Germano-

• FPGA an internal software error occurred. writing of memory

  Hello world

  We encounter an error during the compilation of an FPGA VI. It is probably related to our use of block FPGA memory. We have a non-timed while loop which is reading a host-target FPGA FIFO and writing in memory block (inside a Subvi called z_scan_write.vi). In another loop (this one is timed loop), there's a Subvi we called z_scan_read.vi, within which read us of the memory block.

  Does anyone have an idea what goes wrong and how to avoid this problem? Thank you very much in advance for any suspicion!

  The full error message is as follows. Note that this is for the two subVIs z_scan_write.vi and z_scan_read.vi...

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information:
  nirviUIDToObject.vi
  Error getting of to the UID object reference.
  All the analyzed text:

  
  -61060
  C:\Program Files (x 86) \National Instruments\LabVIEW 2010\vi.lib\rvi\ClientSDK\Core\ErrorReporting\Private\nirviPersistentNameToProjectItemLineInfoCallback.vi
  zIntensityTuples/{29C03A58-DC8D-4BC7-BAFA-66AFAE4E42D1}/%s
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_write.vi_FPGACompileCopy00000021.VI
  2747
  Memory write 'memory method Node '.
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_read.vi_FPGACompileCopy00000001.VI
  194
  Reading memory "memory Node method.
  
  
  ProjItem
  
  
  
  

  
  -61060
  C:\Program Files (x 86) \National Instruments\LabVIEW 2010\vi.lib\rvi\ClientSDK\Core\ErrorReporting\Private\nirviPersistentNameToProjectItemLineInfoCallback.vi
  zIntensityTuples/{29C03A58-DC8D-4BC7-BAFA-66AFAE4E42D1}/%s
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_write.vi_FPGACompileCopy00000021.VI
  2747
  Memory write 'memory method Node '.
  
  
  ProjItem
  
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.z_scan_read.vi_FPGACompileCopy00000001.VI
  194
  Reading memory "memory Node method.
  
  
  ProjItem
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  
  -61106
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI
  
  
  
  2
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2803
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  3
  1
  
  C:\NIFPGA\compilation\FPGAWrapperAK101_PXI-7813R_main_C0C9511F\MungedForFPGA\NI. Munge.main.vi_FPGACompileCopy00000001.VI
  2816
  Subvi: ' NEITHER. Munge.generate_DAC_voltages.vi_FPGACompileCopy00000001.VI'
  
  
  
  
  

  We could solve the problem. It was actually caused by the fact that we had set some subVIs to not reentrant. Their semifinal implementation (with the option to clone preallocate) solved the problem.

• Internal software error error-224606 in MIO

  Hello

  I get this error-224606: "internal software error has occurred in the MIO software. Please contact National Instruments. »

  It happens when I try to use the DAQmx controls Task.vi to abandon a task that awaits a digital triggering of an analog acquisition that has no time-out.

  I'm using LabVIEW 2010 sp 1.  My version of DAQmx is 9.2.3.  The camera I use is a DAQPad-6016

  When I was running this software on a USB-6251, I had no such problem.

  All solutions?  Thank you

  Hi pgaastra,

  Hmm, the error you see certainly seems buggy and should be the subject of an investigation.  However, I'm not sure about the validity of the abandonment of a task in the middle to access the DAQmx Read.  There is a better way to achieve your final goal.

  The easiest way is to simply ask the number of samples available.  You would then only call DAQmx Read after there is a number not null samples available.  See the code attached below.

  Best regards

• FPGA internal software error

  Hello

  I'm under LV 2010 SP1, I don't know what version of the FPGA module I have, but I think it has been upgraded during the SP1 update.  The error is less.  It refers to two of the four globals, I use communicate a FPGA timed to a non-timed loop loop.

  My code has compiled since the upgrade, but not since the addition of the globals...

  I'll appreciate any help on this.

  Roger

  An internal software error occurred. Please contact National Instruments technical support on ni.com/support with the following information: nirviUIDToObject.vireference object get error for UID. All the analyzed text:
  -61103 1NI. Munge.S3 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4624Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11890Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Munge.S2 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11881Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11878Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Changed Munge.AO Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11906Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4622Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'41C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11905Global Variable: ' NEITHER. Changed Global.vi_FPGACompileCopy00000001.vi Munge.AO'
  -61103 1NI. Munge.S3 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi4624Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11890Global Variable: ' NEITHER. Munge.S3 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Munge.S2 Global.vi_FPGACompileCopy00000001.vi21C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11881Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'31C:\NIFPGA\compilation\CardiaLen2_FPGATarget_CardiaLen2IO(FPG_86098CD2\MungedForFPGA\NI. Munge.CardiaLen2 IO (FPGA).vi_FPGACompileCopy00000001.vi11878Global Variable: ' NEITHER. Munge.S2 Global.vi_FPGACompileCopy00000001.vi'
  -61103 1NI. Changed Munge.AO Global.vi_FPGACompileCopy00000001.vi21

  Snip...

  Unfortunately, even if you can guarantee that the written word never happen at the same time if you write only once per carton, LabVIEW FPGA currently only has not the ability to position the system globals arbitratio for multiple entries on the diagram can cause this error.  What I would say is that you write the overall each iteration of the loop outside the structure of the case and that he wire simply the value on a tunnel on the structure of the case.  This will allow you always change the value each time through and will eliminate the error of code generation.

  If you want to send your comments about this particular use case of LabVIEW FPGA R & D, I would recommend that you post your idea in the Exchange of ideas of LabVIEW FPGA.

• Cannot export DVDs even - internal software error

  This is the error code:

  internal software of the volumes: error, versions, mango, xcode projects/authorcore /... /... /Sonic/DVDCreator/FormatLib/Vobulator/TitlePlanner/CGOPGrouper.c pp, line 410

  Tried to export disk image but no luck either

  Thanks Stan,

  OK, I fixed it by starting a new complete project and re do the project. Then he worked... weird. I did the exact same thing project too:

  Intro / first video game created with a menu > in static menu with a Play All and 3 separate chapter links. (Not very complicated so it was easy to match exactly)

  Just for the reference of the foregoing response of Stan: I had 3 videos on my calendar, I was Admin, I had gaps in my timeline in Prem (which won't matter in any way, as I wasn't using dynamic links) and not substitutions. So I can't tell any of them were the factor affecting. I think it's just "one of those bugs.

  Thanks stan anyway, appreciate your reply.

• Error when burning a DVD DVD Maker - "impossible to crΘer the cataleptic failure of dvd.

  Original title: Windows DVD maker
  I get the error (failed to create the cataleptic failure of dvd)

  Hello

  I suggest that you try reducing the burn speed in the creation of DVD and check if it works.
  Choose a speed slower burn to your DVD recorder as follows:

  1. return to the page Add images and videos on the DVD and then click onOptions.
  2. in the DVD burning speed box, selectmedium orslow.

  Also, make sure that you save the movie on the computer and try to burn it.
  If the previous step fails, then I suggest that you uninstall any third-party DVD burning software from the computer and check if it works.

  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Change Windows DVD Maker DVD-Video settings:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Burn a DVD-video disc:
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Session Fixation error" - cannot burn CD/DVD with Qosmio F45-AV11

  Hello... m from Saudi Arabia. I have a problem with my DVD - RW Drive (TEAC DV-W28SL) drive with my Qosmio F45-AV11. When I try to burn CDs, it is always 'Mistake of Fixation of Session', "could not perform Fixation" etc and I lost a lot of blank CD, I can't burn successfully. Please help me how to solve this problem:

  Here is the text of newspaper which shows:

  Toshiba
  -***-3005-4001-0556-76E0-0900-4026-X8E5-*** (*)

  Windows XP 6.0
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 169792 bytes, created 14/03/2007 12:02:04

  NT-SPTI used
  Nero Version: 7.5.14.2
  Internal Version: 7, 5, 14, 2
  (Nero Express)
  Recorder: Version: M.6A - HA 1 YOUR 0 - 7.5.14.2
  Adapter driver: HA 1
  Drive buffer: 2000kB
  Bus type: default (0)-> ATAPI, detected:?
  CD-ROM: Version: M.6A - HA 1 YOUR 0 - 7.5.14.2
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: TOSHIBA MK2035GSS iaStor Port 0 ID 0 DMA: on

  = CDRom-Device-map =.
  TEAC DV-W28SLCTF F: CDRom0
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 83886080 (0) bytes
  BUFE: 0
  Physical memory: 2037 MB (2086720 KB)
  Free physical memory: 993MB (1017672kB)
  Memory used: 51%
  QUERIES PFiles: 0x0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  4.11.2008
  Digital Jukebox (MP3, WMA, Nero)
  21:35:30 #1 text 0 file SCSIPTICommands.cpp, line 411
  LockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  21:35:31 #2 text 0 file Isodoc.cpp, line 6517
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: REAL
  Multisession: FALSE
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  21:35:31 #3 text 0 file Burncd.cpp, line 3178
  TEAC DV-W28SLCTF
  BURN-Proof activated

  21:35:31 ISO9660GEN #4-11 file Geniso.cpp, line 3341
  First address writeable = 0 (0x00000000)

  21:35:31 #5 text 0 file Burncd.cpp, line 3490
  Turn on Track-At-Once, using CD-R/RW media

  21:35:47 #6 Text 0 File DlgWaitCD.cpp, line 307
  Last possible write address on media: 359848 (79:59.73)
  Last address to be written: 314215 (69:51.40)

  21:35:47 #7 Text 0 File DlgWaitCD.cpp, line 319
  Write in overburning mode: No.

  21:35:48 Text 0 File DlgWaitCD.cpp, line 2940 #8
  Recorder: TEAC DV - W28SLCTF;
  CDR code: 00 97 27 28; Entry YSOS of: Princo Corporation
  ATIP data:
  Special Info [hex] 1: F0 00 80, 2:61 1 b 1 c (LI 97:27.28), 3: 4F 3 b 4 a (LO 79:59.74)
  Additional info [hex] 1: FF FF FF (invalid), 2: FF FF FF (invalid), 3: FF FF FF (invalid)

  21:35:48 #9 Text 0 File DlgWaitCD.cpp, line 493
  > Protocol of DlgWaitCD activities:
  =========================================
  Insert the disc to write to.
  (Average in drive: CD - R.) Medium required by compilation: CD-R/RW.)

  21:35:49 text 0 file ThreadedTransferInterface.cpp, line 792 #10
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 20217 (20217) original disc POS = #20217 / 4:29.42
  relocatable, pos to drive for the cache-write implementation not required / required
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 20215 blocks [F: TEAC DV-W28SLCTF]
  --------------------------------------------------------------

  21:35:50 #11 text 0 file ThreadedTransferInterface.cpp, line 995
  Prepare [F: TEAC DV-W28SLCTF] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Session closed, fixed disk
  3 to 3 titles: Idx 0 Idx 1 next Trk
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 41711616, ISRC ""
  Introduction DAO:
  ===========
  ___Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | ___Size_ | ___NWA_ _ | _RecDep___
  293849 | Lead-in | 0 | 0x41. 0 | 0 | 0x00
  293849 | 3. 0 | 0x41. 0 | 0 | 0x00
  293999 | 3. 1. 0x41. 20217 | 293999 | 0x00
  314216 | Lead-out | 1. 0x41. 0 | 0 | 0x00

  21:35:50 #12 text 0 file ThreadedTransferInterface.cpp, line 1066
  2 blocks from output taken at the end of track 3. Length: 20217-> 20215.

  21:36:10 #13 text 0 file SCSIPTICommands.cpp, line 231
  Error LockVolume: access is denied.

  21:36:10 #14 Text 0 File SCSIPTICommands.cpp, Line 254
  SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

  21:36:12 #15 text 0 file SCSIPTICommands.cpp, line 209
  SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

  21:36:12 #16 text 0 file Burncd.cpp, line 4263
  Caching options: cache CDRom or network-Yes, small files-no)<>

  21:36:12 #17 phase 24 file dlgbrnst.cpp, line 1760
  Caching of files started

  21:36:12 #18 text 0 file Burncd.cpp, line 4382
  Cache writing successful.

  21:36:12 #19 phase 25 file dlgbrnst.cpp, line 1760
  Caching of files completed

  #20-21: 36:12 Phase 36 file dlgbrnst.cpp, line 1760
  Burn process started at 24 x (3 600 KB/s)

  21:36:13 #21 text 0 file ThreadedTransferInterface.cpp, line 2712
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to 293999 #.

  21:36:14 #22 text 0 file MMC.cpp, line 22351
  Set BUFE: BURN - Proof-> ON

  21:36:14 #23 text 0 file ThreadedTransfer.cpp, line 269
  Size of the memory pipe 83836800

  21:37:20 #24 text 0 file MMC.cpp, line 17112
  start closing a Session

  21:37:23 #25 SPTI-1176 file SCSIPassThrough.cpp, line 179
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1176)
  Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Printing Code: 0 x 72
  Meaning of Qual: 0x03
  CDB data: 0 x 00 00 00 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 71 00 05 00 00 00 00 0E 00 00 00 00 72 03

  21:37:23 #26 CDR-1176 file ThreadedTransferInterface.cpp, line 1244
  Session fixation error
  F: TEAC DV-W28SLCTF

  21:37:23 #27 text 0 file MMC.cpp, line 17112
  start closing a Session

  21:37:24 #28 SPTI-1176 file SCSIPassThrough.cpp, line 179
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1176)
  Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Printing Code: 0 x 72
  Meaning of Qual: 0x03
  CDB data: 0 x 00 00 00 00 00 00 00 00 00 00 00 00
  Sense area: 0 x 71 00 05 00 00 00 00 0E 00 00 00 00 72 03

  21:37:24 #29 CDR-1176 file ThreadedTransferInterface.cpp, line 1244
  Session fixation error
  F: TEAC DV-W28SLCTF

  21:37:24 #30 phase 38 file dlgbrnst.cpp, line 1760
  Burn process failed at 24 x (3 600 KB/s)

  21:37:24 #31 Text 0 File SCSIPTICommands.cpp, Line 254
  SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

  21:37:28 #32 text 0 file Cdrdrv.cpp, line 11061
  DriveLocker: UnLockVolume completed

  21:37:28 #33 text 0 file SCSIPTICommands.cpp, line 411
  UnLockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  Existing drivers:
  File ' Drivers\ADPU160M. SYS: Ver = 6.4.645.100 (NT.051018 - 1332), size = 98408 bytes, created 02/11/2006 12:50:35

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

  Waiting for your valuable response.

  It s pretty cool that you post the log file but I doubt that it could be useful.
  To my eyes the CD/DVD drive is faulty or the CD that you used are not entirely compatible.

  I had some burning questions with my CD/DVD drive, but I could solve this problem by using a different CD and DVD from another manufacturer.
  I have read that many people recommend using TDK CD - R or DVD - R media.
  I checked these discs and my drive supports it fully.

  Maybe you should try it too.

  Welcome them

• Transcoding in Encore error while burning a DVD

  I recently downloaded CS6 again through creative cloud and it was working fine until I tried to burn my project to a DVD. He had almost finished the bulk of the video transcoding and it stopped and gave me this error: error OSStatus = - 47. My computer (which is a MacBook Pro) also gave me a message saying that still had a problem: [/ Volumes/versions/Amawat/hand/Adobe/MediaCore/ASL/Foundation/Make/Mac /... /.. / Src/Mac/MacFil e.cpp - 1104].

  The video is quite long and has been exported from Final Cut Pro X to the H.264 format.

  The project that I am working for a client and should be finished soon. I already tried by raising both of these error codes and have resulted in nothing. Can someone tell me what is the problem and how it can be solved?

  > burn my project to a DVD.

  > exported from Final Cut Pro X to the H.264 format.

  To have to transcode your video to make it legal to create a DVD

  If the FCC has a MPEG2-DVD export option, use and import the two files (audio and video) in still

  If your FCP export is 'legal' DVD, yet will not transcode to all