internal WiFi works in safe mode but not in normal mode.

I have very hard to pass the data on the net - when restarting, wifi is on but does not work and showing off shortly. My phone via bluetooth connection seemed to work for a while but today although it shows not connected no pass data even after two reboots. Start in safe mode, however, shows wifi on and it works! (that's how I'm connected right now). So it must be a software originally this problem - but how do I tell me what it is? This has happened for a long time - well before the upgrade to El Capitan.

Place your cursor on the WiFi icon - press Option and then click on it

Run the Diagnostics wireless

Tags: Notebooks

Similar Questions

  • Windows Vista works in safe mode but not in normal mode. Desktop freezes and cannot go to the Task Manager

    My laptop (Dell Inspiron; Windows Vista Home premium 32 bit) works on safe mode and safe mode with n/w mode. When I try to boot into normal mode, it comes to the screen asking my password. You can enter the password. Then, it loads the screen saver and freezes. I see a green circle turning. He never stops. I tried ctrl + alt + delete. It does not work. I did repair the system. No use. I tried the system restore. It shows a file as OS (C :) and another as recovery (x :). I chose the recovery (x :) as file control. He has worked and showed a message like system restore successfully in safe mode. But the normal mode of sill is freezing after the password screen.

    Hello

    • All changes made on your computer prior to this question?
    • You have an antivirus installed on your computer?

    To perform a clean boot on a computer that is running Windows Vista, follow these steps.

    1. click on start, type msconfig in the search box and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after starting the computer, reinstall and run the program and see if the problem is resolved.

    Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

    http://support.Microsoft.com/kb/331796

    To restore your computer to a Normal startup mode, follow these steps.

    1. click on start in the box start the search.

    2. type msconfig and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    3. click on the general tab.

    4. click on Normal Startup - load all device drivers and services and then click OK.

    5. When you are prompted, click on restart to restart the computer.

    Also try running a Virus scan using a live care online utility.

    http://OneCare.live.com/site/en-us/default.htm

    http://www.Microsoft.com/Security_Essentials/

    Follow the steps mentioned in the link below

    How to get rid of malware.

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

    Let us know if this helps

    Concerning
    Anthony.

  • wireless mouse does not work in safe mode. I am informed by Logitech, it is a matter of microsoft HID. What now?

    I run XP and IE. You will need to use the mouse in safe mode. normally works in normal mode.

    Logitech says it's a matter of Microsoft HID.

    It is literally true, but incomplete and very misleading.

    See http://support.microsoft.com/kb/310496

    To work around this problem, use a keyboard or a mouse, instead of a USB keyboard or mouse.

    This behavior is by design.

    In the case of USB input devices, so that they work in safe mode, the system must have a BIOS with USB support for input devices and USB legacy mode must be enabled.

    NOTE: USB devices are not loaded in safe mode, unless the manufacturer requests and provides BIOS support for the USB device in addition to input devices.

    Check your BIOS for the applicable USB settings.

  • Keyboard does not work in safe mode

    Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

    Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

    With windows, access device mgr by right click on my computer > properties > Hardware tab > Device Manager button. Locate the keyboard in the list. Right-click on it and select the driver tab choose to uninstall the driver. Now, click on the button to update the driver. See if this will solve the problem.

    Kind regards

    Joel

    Free computer support and diagnostics-->> http://repairbotsonline.forumotion.com/

  • WiFi MiniPCI card only works in "Safe Mode with network.

    AR5001Xplus MiniPCI card only works in "Safe Mode with network" (windowsXP-Home-SP2 and all updates recent).
    In 'normal' mode, it freezes my laptop after a few seconds.

    Hello

    Why you don t give us more information about your problem? We don't know what unit you have? Is the original part of card or you have built at least?

    At the moment I can just recommend you to reinstall the unit with recovery media. If the problem persists, try to install the card separately with the right driver. Otherwise, you must change the WiFi card or test it with the other.

    Give us more information.

  • My wifi works on windows 7, but it is not detected on windows 8

    Original title:

    Windows problem 8

    having powercars. My wifi works on windows 7, but it is not detected on windows 8 in my computer dell laptop. How to connect to wifi in windows 8. I tried Fn + F2 but it makes only bluetoth on and outside. I am not able to see too much on window 8 vertical icon bar. How can I connect to wifi on windos 8 too?

    Hi Yvon,.

    1. What is the model of your Dell laptop?
    2. What is the brand and model of the router?

    Adding to the suggestion of SilverBack_1 you can also refer to:

    http://Windows.Microsoft.com/en-in/Windows-8/cant-find-wireless-network

    You can consult the following links for more information.

    http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=&l=&s=&docid=420860

    http://Windows.Microsoft.com/en-GB/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    I hope this helps. Please post with the State of the question.

  • Firefox crashes at startup, only works in safe mode

    Hello.
    As the title says, I can't start Firefox because it crashes instantly. It only works in safe mode.

    That's what I've tried so far, but it did not work:

    Restored Firefox.

    Reinstalled Firefox and also delete my profiles.

    Hardware acceleration disabled.

    These are my recent incident reports

    bp-114dcdff-7b46-425b-8ec0-478102140218
    bp-464d26b6-4530-4230-8e4f-5000e2140218
    bp-7b489bc8-20ed-4cb5-9d3a-233a02140218
    bp-6a0e5565-1f66-4606-8c29-8ac292140218

    Thanks in advance, I hope you can help me.

    Thanks for your answers, I've updated my graphics card driver, now I can use Firefox out of safe mode with disabled hardware acceleration.

    There is another problem now, Firefox crashes when I try to start with Profile Manager, I use two different profiles, so I need this feature.

    Here are two reports of incidents on the problem:

    BP-a257ee60-b8d6-495c-82a3-605572140218

    BP-2e19ad39-84c5-4BD6-B251-fcbaf2140218

    Thanks for your help and sorry for my English.

    EDIT: I had to repair my installation of windows with the installation disc, now Firefox works, thank you Tyler and cor - el for your time.

  • My Acer Aspire 4736ZG stop each time I start and will work in safe mode

    This problem has been some time now. Whenever I turn on my computer notebook (Acer Aspire 4736zg) close at boot (windows loading screen) and it really means not freeze SHUT DOWN or restarts... He likes to lose power. It only works in safe mode. Installation of Windows 7, 8 CD cannot start (stop as above).
    I did everything: fixing driver, scan virus, chkdsk, update BIOS even install new windows... The problem still there. I tried install Joli OS (Linux) to have a chance but does not work (always closed).

    All ideal for my problem?

    P/S: sorry for my English

    At this point no matter what the problem he is going to need repair. If it happens with more of an OS which pretty much eliminates the possibility of a software problem. I would still say that it is probably overheating, or there is a problem with your graphics card. However, you will need to speak with Acer on this one.

  • LCD monitor only works in safe mode

    I connected a new monitor and will work in safe mode. I tried to change all the settings in safe mode but nothing seems to work when I restart the computer in normal mode. Help, please

    I'd like to see if you can install any software that came with your monitor.

    There is another option to enter in Windows Vista, choose activation lower-resolution (640 X 480)... .or the VGA mode as it used to be called.

    Try to install the drivers in safe mode if it does not work.

    If these don't work, let me know the exact model you new monitor so I can see if I can find any known issues.

    Mark <> Microsoft Partner

  • keyboard and mouse on packard bell laptop only work in safe mode

    I have a packard bell easynote laptop running on windows vista, which has fine worked for two years, the other day I went to signon and not all the hits of keyboard have been recognized, after possibly connection and found loading keyboard and a mouse does not respond as completely unusable.

    -Booted safe mode and everything works fine, ran the antivirus and diagnosis-nothing found, still only works in safe mode.

    has run a restore of system-nada, still only works in safe mode

    tried an own help start-up-no, still only works in safe mode

    Please help he kills me!

    Well, I decided to bite the bullet and give it a go, after all, I know very little of these things, however I'd wait until Saturday, when I have the time to focus on it, then the word 'Register' in your response reminded me that I had bought registry cleaner Uniblue several months ago that I ran last night and hey presto problem solved! :), I'll never know if your solution would work but thanks for your help anyway and I hope that you would have had me there.

    Rich

  • computer only works in safe mode

    Happens to Windows Logo and crashes, does not work in safe mode have lost Admin VAC and can't do a restore
    point

    madmacca,
    We could use a little more information.

    What version of Windows and service pack level are you?
    Do you have an error message, and if yes what is it?
    Nothing changed prior to the show starting (hardware or software)?

    When you start in Safe Mode, a minimal boot and will see if this you start normally.
    Here is information on the clean boot: http://support.microsoft.com/kb/310353

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Parental controls work on safe mode?

    OK so I have to go to a site for the school and my mother will unlock for me to continue with the parental control and I keep him begging for school and she won't if parental control works on the mode safe on windows 7 because I need a little get past it if I can do what I have to do for school o : so if you can answer that would be great thank you;D

    Hi Ryan,

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, you need to know the unlocking of Parental control.

    Yes, the Parental control would work in safe mode. But you must know the administrator password to access Parental control.

    Click on the link mentioned below as reference.

    http://Windows.Microsoft.com/en-in/Windows7/products/features/parental-controls

    Hope this information helps.

    Meet us if you encounter any problems with the Parental controls or any other problem of Windows and we would be happy to help you.

    Good day!

  • Why the HDR toning work with some pictures, but not for others?  I have CS6.

    I have Photoshop CS6 and when I go to HDR toning, it is only highlighted for work with some photos, but not others, why?  Thank you.

    HDR toning does not work with CMYK images. Change the RGB color mode, and then you will be able to use HDR toning. It also works with the color to grayscale mode.

  • Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

    Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

    I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
    I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.


  • Mouse and keyboard only work in safe mode... why?

    Or work on restoring normal operation and all the images are blurred. Said one-stop two players work under ms - back! Someone help me?

    If it works in safe mode it looks like it's the drivers. because in safe mode, it uses only basic MICROSOFT DRIVERS... go in safe mode, go to the DEVICE MANAGER (right click on computer and click on MANAGE then click on allow or continue if prompted, and then click Device Manager).

    under the heading of the keyboard device, click on the '+' and then right click and uninstall all THE items in the CATEGORY of the KEYBOARD and click OK on all messages

    then

    under mouse/mice and other input devices , click on the '+' and then right click and uninstall all THE items in the CATEGORY of the mouse/mice and other input devices and click OK on all messages.

    Then

    Reboot and allow devices to relocate

Maybe you are looking for

  • Satellite X 200-203 turns off when turn off the power

    Hello first of all, excuse my bad English please. Since 2 days I have the satellite X 200-203 portable and my first problem is that the battery does not load.When I connect the power he works very well, but did I unplug the power replisse or the lapt

  • Games on the Macbook Air

    I am playing games on MacBook Air version 10.11.3. It is a 2.7 GHz Intel Core i5. It has 8 GB on it only because I am partitioning with 8 Windows via Bootcamp. My hard drive Macintosh was 14.41 GB free. I am playing Need For Speed (rival or most want

  • threshold problem

    Hello I try to make a thresuld of the isolated object, but I have problem After doing a threshuld the picture will be black all time what is important what is the value of throsuld I first read image aqusition then convert the gray then filter by use

  • What software do I need to run a VI on an SMU-1065?

    Hello I want to run a VI on my SMU-1065.  So far I'm install DAQmx and LabVIEW Real-time on the host and target module. Do I need anything else? Also, is there a way to install the module time LabVIEW Real-time on the host without CD? In other words,

  • WAG310G - to USB HDD size limit?

    Hi all... just bought a WAG310G. Wondering if there is a size limit on the USB hard drive that router can take? What is the GB, as appropriate? Any help appreciated Ta / Kevbb.